a tip for the grills.. when you removed the first, try to go from that side to the other and not again from the top, makes it way easier
@6Atomic6Rooster66 ай бұрын
Thanks so much for this! I was resigned to popping out my mirrors to change my caps until I stumbled on this vid. Couldn’t have been easier as you demonstrated (and the tabs came out intact). Anyone who thinks that this isn’t the “right” way to do it is out of their mind. 😅
@stoneautomotive6 ай бұрын
Your welcome and glad it helped 😎👍
@samcourt62282 жыл бұрын
The M style mirror caps on my M140i made a big difference, plus binning the silver canards looked better on a white car. The Reiger diffuser was one of the best things I did to that car. Removing the old 3M tape is a shit job.
@stoneautomotive2 жыл бұрын
Yea that old tape was nasty, took the longest 😅
@andrewwise48772 жыл бұрын
i just replaced the lower left and right vent grilles with the USDM ones which dont have the silver canards. You can order them from Lithuania and they're pretty cheap.
@stoneautomotive2 жыл бұрын
Good to know if the painted blades start to chip etc 👍
@57veggie9 ай бұрын
Got a link for this?
@moist.teabag4 ай бұрын
Got a link?
@W00LFY1002 жыл бұрын
Rookie mistake on the kidney grille install. Popped the black one in for a side by side shot instead of using the hole to access the other side instead of scraping your hands to bits again going from the top 😅
@stoneautomotive2 жыл бұрын
Oh man how did I not think to do that 😅
@ricstanley87699 ай бұрын
Does anyone know if you can get those wind deflectors for the windows for this model , i have this car and im dying to find some but i just cannot find them anywhere
@Evolve_windows2 жыл бұрын
Iv got the carbon cs spoiler and ct carbon diffuser and mirror caps really transformed the look for the car Got springs and wheels to change next any recommendations for wheels I don’t want spacers and what widest rears possible?
@stoneautomotive2 жыл бұрын
Check out episode one, the CM wheels fitted perfectly without spacers & nice and flush with the arches👌
@michaelzhang9535 Жыл бұрын
do you have the link for the piece that was attached to the lower grille above the corner splitters
@stoneautomotive Жыл бұрын
Are you referring to the “blade” located inside the grill? That was the standard one painted as detailed in the video
@Evolve_windows2 жыл бұрын
I took the glass out to do my caps Doh 🙄
@stoneautomotive2 жыл бұрын
I didn’t want to risk 7 years bad luck 😅 it was straight forward with the trim removal tool though 👍