Proper Cosmetic Flexible Repair Bumper Repair Process
Рет қаралды 20,381
8 жыл бұрынStandard Operating Procedure for a one-sided flexible cosmetic repair on a bumper or other plastic part. For example, a shallow gouge or scratch. A strong, flexible repair can be done with 3M™ EZ Sand Multi-Purpose Flexible Adhesive. Don’t forget to use 3M™ Polyolefin Adhesion Promoter!
@TheMrmmkkpro 3 жыл бұрын
I'm trying this on a 1973 firebird bumper, thanks for posting👍👍
@cm1133 3 жыл бұрын
What is the part number for the 3M epoxy blend gun?
@ShadowcasterZero 6 жыл бұрын
and how should we paint it?
@cm1133 3 жыл бұрын
Prime, sand, prime, sand, blend area with 2 coats of base paint, blend area with 2 coats of clear. Wet sand and polish once clear is cured.
@wokefromthematrixspreadthe5425 4 жыл бұрын
"With clean dry air"...what else is air supposed to be?
@3MCollision 4 жыл бұрын
Depending on your compressor and/or pipe you may have contaminated air (rust particles, oil, etc.). Always good to have your air quality tested and adjust filtration as needed for body and paint departments.
@Tairone1337 Жыл бұрын
There’s some air lines with lubricator and no water trap smart ass
3M Collision Repair
Рет қаралды 168 М.
Миша злой😎
Рет қаралды 411 М.