Protech P230S Post Driver 'The Next Generation in post driving
Рет қаралды 259,824
12 жыл бұрынThe p230s ,The next generation in post driving Technology!, with 120 deg slew , 500mm telescopic boom, 35 deg mast angle!, Hydraulic mast leg , and protechs unique weight operating system! this machine is also available with tele mast , Rockspike and hydraulic front legs ! 250 & 300kg Hammer
www.protechmachinery.co.uk
@steveorino78 Жыл бұрын
It would be nice if they have built-in big levels this one is nice .
@farmfencesolutionsllc 5 жыл бұрын
Looking forward to getting one here to try out.
@anvilsbane Жыл бұрын
As far as the slow comments, I think he’s just new to the machine and a bit tentative . With practice, the machine could go much faster. I like that the drive plate stays with the post, eliminating the need to be anywhere near it to keep it driving straight. Cost certainly a good question, but this looks superior to Shaver’s channel hydraulic driver(yes, I own one).
@srankin8022 5 жыл бұрын
Looks like it would work well driving post. But, also looks painfully slow to set up and move to the next post.
@whathasxgottodowithit3919. 3 жыл бұрын
Cable clamp fitted incorrectly on the weight
@thegeneral3094 4 жыл бұрын
Big pembrokeshire
@garyreiswig5079 7 жыл бұрын
cost
@roberthillyer2888 4 жыл бұрын
Too slow for any production. But if it's a hobby, no problem, it's still to slow.
protechmachineryltd
Рет қаралды 108 М.
vectorpowerdrive
Рет қаралды 78 М.
protechmachineryltd
Рет қаралды 79 М.