Hell ya coffee and a tech tip! Good way to start a Tuesday.

You should make buttons for your quick release system 🇺🇸

Thank you Motion Raceworks for another piece of solid, actionable data.

Nice. In addtion, I would take a small section of rubber hose and slit down one side it so that it can go over the wire where you zip tied it to the column to provide some additional strain relief where it attaches to the column.

Doug giving us just the tip this morning

Love The Just The Tip Tuesday videos.

I used a pro wire 4 wire cable to power 3 buttons. Big DIY guy here came out perfect 1 cord for 3 buttons

why has someone not designed a clock spring setup, like used in an oe column, but specifically designed for motorsports use? we have the technology to make a street car drive 1000+ miles and run 5s, but nobody can come up with something better than a wire wrapping around a steering shaft?

...great info here !...

Good stuff! Always be self-aware!!

all that space in the steering column could be perfect for wiring

tech tip idea , explaining the difference in fuel pressure regulators , dead head , bypass , how and when they should be used

You guys should make the disconnect have the wire run in the middle and when u remove the wheel have a plug built inside of the middle you guys make Steering wheels and almost everything for steering might work out would be nice no more wires hanging down

Cord available in RED color?

Hey Guys love all your products. Installed a icon series throttle body a month ago and it not only fixed my idle issue but it fixed issues I didn’t even know I had. I’m wondering if you guys ever run expansion tanks for Co2 boost control. I’ve been fighting my system all summer. Tried every PID setting possible. Some guys on Holley forums recommended a small tank to increase dome volume essentially. I’m building one now. Wondering if you guys run anything like that and if so I think that would be a great product to offer and maybe some tech tips on it would be great. Thanks for all the awesome content.

When can we get a up date on the Nova?

Tech Tip x2 Tech Tip squared Tech (Tech Tip) Tip

Put a piece of plastic or aluminum between the column and display!

Flush cutters for those zip ties. Those short end will slice you like hot knife through butter.

👍

Here's another tech tip to stuff inside your tech tip: When working on steering components where you'll want to cycle the wheel from lock to lock a few times to test that everything is working as it should, jack up the front of your car just high enough to get the front tires off the ground. It will be easier to turn the wheel and you won't wear a flat spot in your tires. Yes I know you're not really going to wear your tires on a smooth painted or tile floor but a lot of folks work on their car in their driveway. I mean the car was already parked in a 2 post hoist, just take 30 seconds to raise the car off the ground.

😎

How about what is the best way for someone who wants to do a drag n drive event to do so ?maybe not a full on drag car but vehicle of there choice to start with and the rules and ect for the build and safe things one needs ect like a 15 sec car doesn't need the same as a 10.0 or maybe idk , but I want too do a drag n drive with one of my Vans but not sure where to start.

When is that blazer gonna be ready?!!!!

When are you guys going to make a pad similar to factory cars where the wires mount to the wheel and the column with spring loaded pins coming out the back of the wheel to ride on the pads on the column then wires can be loomed tight to the column and no more hanging phone cords at all

I just unplug mine when not actually racing

Doug, How's the Nova coming along? Will we see it this year or will you be driving El Toro?

Doug you guys are always trying to come up with new stuff right, why don’t you create some type of quick connect clock spring type steering wheel, where the wires pull out of Center post, the guys usually just hang it in something nearby anyway, wouldn’t that be nice, unlimited buttons curly cord that pulls out of Center tube and you can make a mount for hanging the steering wheel nearby. Think about the convenience, you could even make the steering wheel mount a quick electrical connection! No cord just plug and play clock spring for a race car! Limitless possibilities, turn signal buttons, nitrous, scramble, headlights, cruise control, dude we should make this together.

Nope I point them west not east

Make them bluetooth and eliminate the wires all together.

Thanks for giving me a seizure lol