- you like things in focus? - naaah dw

Totally doing this to a deck that that I’ve drawn/painted on. Thanks!!

I always use Locktite hard epoxy on both ends of my board. I make it into a semi-circle by putting a piece of painter tape across the end of the board how ever far in I like to coat (3-4 inches). I then wrap a piece of painter tape around the edge of the end or the board to make a barrier. Then put a little Vaseline on the inside or that tape to keep the epoxy from bonding to the tape. I then pour the epoxy. Depending on how much you tilt your board (back for thick forward for thinner) you control the depth of the coating. I usually end up with a 1/4 - 1/2 thick coating. Take the tape off and you have a clean, clear, hard, semicircle of plastic protection. It will wear down over months but the wood will be spared. You can also just repeat the procedure to get your thickness back. Also, if you already have razor tail this will fix the board.

i wish i watched this video last year

Now we’re taking!!!! Loved it

2 oz might not seem like much but it's enough. I'm sure the resin is thicker on the concave which might cause balace issues on flip tricks. Good for a cruiser board though.

how does affect board and nose slides? does it make it more slick?

Does it still allow the board to flex?

I was wondering if it makes your board slippery

Do a boardslide let's see how the epoxy hold up!

I just got my board a few days ago but now the edges are scratched. Might be a bit late now.

Needed a boardslide test

What drill did you use on the board? Im in the middle of building a skateboard with a resin finish

What’s the best way to fix a paint scratch on a long board of skate board FYI right now I just used a marker

Santa Cruz literally made a skateboard with a plastic coating on it. No matter how hard you try to scratch it, it rarely gets any scratches, you really really need hard to try and scratch it. Sadly they don't exist anymore and im disappointed after buying the vx Santa cruz version because it's just raw wood, no protection. Does Anyone know what kind of coating they did on it, because the coating or the graphic was literally half a centimeter thick

Is it possible to just remove my trucks and add the resin? Instead of buying a brand new deck?

How does it look now after tail & board slides? great idea.

nice video. When you apply with your hands, how can you make sure the resin have no streaks?

How many ounces did you use of epoxy for this project? I’m using 4 to coat decks now according to size on the art resin calculator. Just curious if you used the same or less?

Is this okay to use for if I have stickers on the bottom of my board

Can you do the top of the deck? And how to not have it all in the middle

what would happen if I wanted to print off a piece of art on paper, then seal it onto the skateboard with resin/polyurethane? I'm not artistic and avoid using paint when possible.

Beeeeeeeautiful!!

if i haven’t sanded down the board before painting with the resin make it like smudge and ruin the design?

Where did you make the design for the bottom? What site?

No grinding or sliding?

can we have the same result with a spry can of resin?

Where do u get it? And can u use it on a longboard?

What if I don’t got that hot gun thing

Would this work on primitive dragon all super boards?

Will this keep the board from sticking while doing any slide tricks? Ive done hand painted decks in the past but I always noticed spray paint would cause it to stick. Looking for a tip to keep the deck sliding fine after I’ve pinted the graphic.

Does it protect the graphic from railing?

doesn't it crack?

I have 1 pallet of skateboard decks and 2 pallets of longboard decks.. 98% are complete blanks and the rest say Quest…. Anyone want to please take them away

If the board is for an eight year old girl then the graphic isn't going to get scratched anyways..