Protect Yourself! Do you know when to use each style of Respirator? Plus More Safety Equipment!

Рет қаралды 231,514

Күн бұрын

In this video Scott goes over the Basics of Safety equipment and when to use them, including respirators, fresh air systems, safety glasses, shields and more!
Get Safety Gear: www.eastwood.com/shop-equipmen...
For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook - / eastwoodcompany
Instagram - / eastwoodco
Blog - www.eastwood.com/blog
Since 1978 Eastwood has been supplying products to the people who want to do the job right. Eastwood offers a complete line of hand tools, welders, plasma cutters & accessories, metal working tools, powder coating supplies, paint and paint guns, specialty paints and hard to find products, all for the DIY-er. Eastwood has all the tools and supplies you need to restore your car, truck or motorcycle.

Пікірлер: 334

@kimmer6 4 жыл бұрын

Now you can use them while shopping.

@ZenoCiti 4 жыл бұрын

I do hahahaha

@281cu6 4 жыл бұрын

I legitimately use the green one when I shop. 🤣

@maxortega8073 4 жыл бұрын

my dad is on chemo so COVID will 100% kill him so he uses mine to stay extra safe

@canyoncrow11 4 жыл бұрын

I use my Gerson 8311one in the store Everyone asks where I got it

@281cu6 4 жыл бұрын

@@canyoncrow11 O'Riley's has replacement particulate filters, if you need them.

@troyna77 4 жыл бұрын

He failed to mention that if you use these for an extended period +30 minutes, you will experience a dry nose and sore throat. You need to be deliberately slow and deep with your breathing(inhale and exhale). If not you will give yourself a sore throat. Also store mask in two bags. and the bag that hold the resparator place a dissecant packet. You don't want to store the mask in the dark coupled with sweat from resparation, mold with accumulate. Also when checking your mask for integrity, once on breath in deep. If you feel cool are around nose, your top head loop is not right enough. Same with bottom.

@AyeAyeAmanda 3 жыл бұрын

I genuinely thank you for these tips. I’m working on a house and this is my first time needing a respirator. I appreciate you!

@o.k.8138 3 жыл бұрын

Thank you!

@FunnyCODAssasin 3 жыл бұрын

❤️

@Zeus-ys5cj 2 жыл бұрын

Respirator*

@oh5148 2 жыл бұрын

Yup had the sore throat using respirators

@shaygyrl 4 жыл бұрын

Thank you for the info!

@stephencox96.9kcum4 3 жыл бұрын

You looked this up, don't deny it.

@joshuaobrien7034 3 жыл бұрын

Even if they did, here you are benefiting from the info in audio/video form.

@NickVetter 3 жыл бұрын

Since when was research a bad thing?

@AM-vk2yq 3 жыл бұрын

Well yeah i aint tryna fuck up my lungs. Aluminum oxide is terrible to breath in

@KennedyA53 3 жыл бұрын

Wrong way to use this. And I ain’t trying to die here

@MrLarryQ 7 жыл бұрын

A _very_important topic when discussing automobile restoration, thanks for dealing with it here

@totallynoteverything1. 4 жыл бұрын

also handy for starting an uprising

@timmywashere1164 3 жыл бұрын

@@totallynoteverything1. Not effective against tear gas. But great for there intended purpose.

@danielyoshimura3059 4 жыл бұрын

Always make sure to clean your P 100 reusable mask!!! n95 (disposable) for the win!

@nayanmipun6784 2 жыл бұрын

Using less expensive fabrics for using in the respirator's cartridges also works for filtering wood and metal and glass and plastic dust

@jacqueayars603 2 жыл бұрын

Thank-You for the info

@DavidJones-ib3zy 4 жыл бұрын

I got an old 'green' type but the 'nose' rubber has a small tear , this will be a last resort after a good cleaning and fixing the nose (time to get crafty).

@st.chudypatrick6918 3 жыл бұрын

Thanks so much 👍

@MissSassie 4 жыл бұрын

Which one is good for epoxy resin?

@ayo1480 2 жыл бұрын

Thanks for sharing great information! I think you're not supposed to seal used one in a bag though. Instead would need to let it air-dry the moisture in the filter

@eastwoodco 2 жыл бұрын

The correct process is to remove all excess moisture before storing the respirator in an airtight bag.

@enlightenedmcgee 3 жыл бұрын

Which one do I wear while working with mixing plaster?

@arbur4746 4 жыл бұрын

priceless video in post Corona Virus world

@GameArtsCafe Жыл бұрын

I usually tap the used filters on a surface to get rid of insulation and drywall dust but how about using a vacuum? at least if it's the same suction force as an inhale or would it compromise the filter? I would hope that we could at least get half the life of the activated carbon once the package is open.

@bryanarriesgado 4 жыл бұрын

Will these filters also connect well on 3m respirator

@andresescobar3670 3 жыл бұрын

Can the dust mask protect from brake dust, and clutch material?

@oo-ll4vi 3 жыл бұрын

Which one is best for smoke and particulates?

@86media_ 3 жыл бұрын

ive been ply cutting carbon fiber and wearing a respirator with p95 filters. im fully shaven and did a fit test and fibers are making it into the mask and i can feel it in my throat. causing a burning sensation in the throat similar to fiber glass. are p95 not enough for carbon fiber?

@michaelpatton2524 2 жыл бұрын

Thank you

@kolsonmaddox777 4 жыл бұрын

I’m guessing most people are here after COVID-19 got bad

@johnmeurs4371 4 жыл бұрын

yep

@dronepilot1333 4 жыл бұрын

Yup

@-smp-scientificmethodpersp838 4 жыл бұрын

Yeah, but I'm still wanting it for painting lol Covid is getting in the way of my work supplies

@Wrathful2000 4 жыл бұрын

I'm trying to figure out how to protect myself from Resin fumes lol

@kolsonmaddox777 4 жыл бұрын

Wrathful2000 lol

@Captianmex1C0 3 жыл бұрын

I'm planning on Spraying some Primer on a car, I bought a mask and it has The Plastic cartridges but The cartridge is pink, Does that make a difference?

@JohnPaul-jg7es 2 жыл бұрын

What's best for protecting against car exhaust fumes(I push carts)

@cameronmccurdy3201 2 жыл бұрын

What type of mask would be best suitable for packaging ammonium carbonate?

@JudahMaccabee_ Жыл бұрын

Which respirator would be good for lead vapor? I have high blood lead levels but I still want to shoot, so I am looking for a respirator for a while until my BLL goes down.

@dfhgj1022 2 жыл бұрын

So u cant use the first simple one for welding stainless steel etc ?

@rob12449 4 жыл бұрын

just one point about isocyanites, the green mask you show which I have on the bag it seems to imply it is safe for isocyanites, however I believe this is incorrect. these canisters are very much like the 3m paint respirators and I'm pretty sure they do not support that claim. in fact no respirator that you draw air will qualify because of the chance air slips by. besides isocyanates should have full face protection. therefore the system you spoke about with the external air supply and hose is the way to go. i myself do not spray isocyanites because I do not have a spray booth nor the proper safety equipment.

@zachmiller9175 Жыл бұрын

For painting I would really say a mask with a downward facing exhale valve would be worth the cost, accidentally blowing condensate onto a workpiece during painting sucks and the front facing valves will absolutely do that at random/whenever you look down. 3m 6500 is a good one available with a quick latch and the 7500 is super comfortable silicone.

@mdemeglio Жыл бұрын

What 3m filter do you recommend for spraying base coat / clear coat?

@victortrense5640 4 жыл бұрын

Do the replacement filters work on 3M bayonet masks?

@LuisLopez-ky1km 2 жыл бұрын

What mask would you recommend for porta potty cleaning?

@codegaming_yt7704 3 жыл бұрын

What is best to use for Land scaping full set up

@martinmunoz9541 3 жыл бұрын

Which mask it will be enough to work in very dusty cement environment ?

@jerryp2433 2 жыл бұрын

I need something to remove welding fumes and dust from my garage in the winter. I have to build a booth with some exhaust fans, but it would it would be great if you guys had something.

@erikbosma8765 Жыл бұрын

I cut a hole through my inside and outside walls, got a flapper-type valve for the outside and connected a hose (like a dryer hose but aluminum) to the inside. Before attaching the hose I bought an electric fan which is built to fit into pipes/hoses and ran the wire through the hose down to the entrance. You can put the entrance to the hose/pipe where ever you need it and make it fast or just keep it loose in order to be able to weld where ever you want. The fan works well enough to such the smoke/gases outside. If you can fine some kind of filter then the neighbours might not freak out too much but then you would also need a more powerful fan.

@jerryp2433 Жыл бұрын

@@erikbosma8765 I guess I have to do the same thing. Thanks.

@farisbuhari2053 4 жыл бұрын

For fertilyzer mask?

@juilaaraujo9936 2 жыл бұрын

What mask is best for when using epoxy??

@elwyncarrol3883 4 жыл бұрын

I use one of the half face Respirator

@Mr.TrouDeCul 4 жыл бұрын

If only we knew how important this would become. Nobody cared who I was until I put on the mask....

@TonySopeano46 Жыл бұрын

IF I PULL IT OFF WOULD YOU DIE?!?!

@JohnDoe-xq8sk Жыл бұрын

Strawberries are full of fiber.

@johnthomas2970 Жыл бұрын

If I pull that off would you die?

@how2hogan380 3 жыл бұрын

I have a question will the mask still work properly if you remove the inhalation valves because I lost mine after removing them 😔

@gabakusa 5 ай бұрын

what is the best mask for diesel fumes?

@MelodicsRareMusicVid 2 жыл бұрын

will a p95 work for lead paint scraping?

@jamesmarentette9781 6 жыл бұрын

If you cut the plastic on the filters it will fit

@ljthelgbt5792 Жыл бұрын

I didn’t think any filter would protect against isocyanates? The only suitable mask would be the air fed option. Auto paint and clear contains that chemical if I’m not mistaken.

@blackmist12345678 9 ай бұрын

Will a NOISH N95 be fine for drill through floor joists and for cutting drywall? Or do i need a respirator. Recently bought a DVS half mask P100 OV mask, mainly because when in attics you cannot rely on a N95 for fiber glass. Absolutely not, im not taking that chance.

@ezequielcrespo7046 2 жыл бұрын

What masks are good for working in hot attics full of fiberglass? That allows you to breath easy without struggle of beating able to breath

@cindypoo9943 3 жыл бұрын

How often do you need to replace the filters on a respirator?

@Jackseyez 2 жыл бұрын

How do you clean the 3rd one?

@NviGWarren 4 жыл бұрын

Thanks for the video, I just ordered.

@vicenteht 4 жыл бұрын

Sundstrom

@abigailhenry6154 2 жыл бұрын

can you breathe ?

@jamalmcgrath810 4 жыл бұрын

Can the p100 be cleaned and reused

@zanaga1901 2 жыл бұрын

What one is good for when you using Bondo I still could smell Bondo after using my 6800 respirator. Am thinking about getting a air purifier to get rid of the smell of auto paint and Bondo I don't want the smell in garage plus when was using Bondo this week my running more.

@eastwoodco 2 жыл бұрын

The 6800 is a great respirator, however, filtration comes down to the filter itself. For Eastwood Contour Body Filler, we'd recommend a half-face respirator and something like the 3M™ Particulate Filter 2097/07184(AAD), P100, with Nuisance Level Organic Vapor Relief. (The organic vapor relief should help with the smell) For painting, get yourself a filter that's designed for paint. The 3M™ Organic Vapor Cartridge 6001 will work great for your 6800.

@markbours6173 4 жыл бұрын

Me and my team have SAS P100 System masks to pick up covid19 cases for the Mortuaries , I'm wondering when we should change out the filters in a time duration?

@isaackarjala7916 4 жыл бұрын

He says to replace it when you can smell something... So carrying something with you that is smelly might help.

@NugsOnly 2 жыл бұрын

Do they protect from glass blowing

@mickbee7871 3 жыл бұрын

The first mask that you showed us ,do you have to change the valve after a certain time ,and if so how long ?

@JohnDoe-xq8sk Жыл бұрын

The first is disposable

@brockley9570 4 жыл бұрын

What is a good mask for dealing with carbon fiber? I normally wear a duel filter half faced mask when I’m working with it. Should I go with a full face mask?

@randoseworld5557 3 жыл бұрын

I'd say you can have the dual filter respirator with goggles. If you are willing to spend more, yes, a full face mask would offer more protection.

@margiedurham650 2 жыл бұрын

What is the best mask to use if you have asthma and oxygen issues a d work with resin and ink paint? I just recently mouth a half respirator 3M 6300 but not sure if the best. Thanks in advance for your time.

@eastwoodco 2 жыл бұрын

Hey Margie, I'm not exactly sure what chemicals you are working with, but see if an organic vapor filter cartridge would fit your needs. -JD

@damienwelch9067 Жыл бұрын

Wat should I used if I working with foam

@treadnokash7598 4 жыл бұрын

Are the filyers washable?

@therawsart3924 4 жыл бұрын

Very topical right now (Coronavirus outbreak)..

@spwan10 2 жыл бұрын

Which one does it all. I don't know if I fully understand, but it sounds like to me... depending on the job dictates which respirator to use. Is that right?

@eastwoodco 2 жыл бұрын

It really comes down to making sure that the filter on your respirator is the right one for the job you're doing. A P100 2097 particulate filter is great for dust but isn't what you want when it comes to filtering paint fumes. In that specific instance, an organic vapor filter is what you'd want. You can get a do-it-all, full face, respirator, but there isn't a filter that will do-it-all.

@prettyparadoxicalwoman8285 Жыл бұрын

I work in a coal mining factory I've used everything from home Depot and nothing and I mean nothing keeps the black dust out what can I use?? I know I feel the suction and it's fastened correct but the black dust always still gets around my nostrils and from the top and from the bottom regardless of it feeling and acting like it is suctioned. It's interesting because I wonder if any of these actually work because it does not with coal dust. Any help on what I should be using?

@tddtv Жыл бұрын

Which would you use when grinding concrete floors?

@GameArtsCafe Жыл бұрын

You will smell smoke with particulate filters, try using one grade higher that's used for Vapors and smoke.

@freebirdsafety 4 жыл бұрын

the respirator with the P100 filters: P100 means oil proof for "P" and 100 refers to it being 99.97% efficient for particles .3 microns or bigger. the 3 one with the organic vapor filters (gray section) is a N95 front filter N= Not oil proof and 95=95% efficient for particles .3 microns or bigger. The first 3 are definitely useable for COVID-19. I know. I've fit tested over 450 medical workers for their respirators and masks.

@freebirdsafety 3 жыл бұрын

@@seanspeller3542 Yes they will. Silica is 10 Microns in size. The P1000 HEPA filter captures 99.97% of particles that are .3 microns and bigger. However, without a perfect face-to-mask seal, the filters won't do any good. Make sure you get a respirator fit test, and I personally recommend the North 7700 respirator. It's a little more comfortable on the face and more forgiving when it comes to a seal.

@elaineloo610 4 жыл бұрын

What kind do I have to use if working with epoxy resin and using flame with it

@PrissyGaming90 3 жыл бұрын

Is the second one good for a small resin pour?

@lindzeysautrey4228 3 жыл бұрын

Yeah I wanna know that also?

@Jonathan-sk2gk 2 жыл бұрын

I am going to work in cement factory . Which mask i should use?

@eastwoodco 2 жыл бұрын

There's a ton of different masks out there. I'd recommend seeking out your workplace safety officer to find out exactly what mask is going to offer you the best protection for your specific environment. -JD

@dabalshahi9376 Жыл бұрын

Hello im working in plastic recycling factory which kind of mask suitable for me?? Help me

@BrianGLee-bc7hj Жыл бұрын

Must be clean shaven to be effective. I would use the gerson replace cartridges after daily use

@BrianGLee-bc7hj Жыл бұрын

Never share masks

@mback12000 2 жыл бұрын

Good video but missing a lot of important safety information. Please search and watch many of the 3m videos to learn when each type of filter is effective.

@eastwoodco 2 жыл бұрын

Agreed, there's a lot of stuff we couldn't fit into this video. Please be sure to refer to the manufacturer information OR your workplace safety officer for the best choice for your work environment. -JD

@RatFartBBC 2 жыл бұрын

I work in a brake pad factory and I’m around a lot of the dust and etc 10 hours a day. I don’t want to get lung cancer in the future. What’s a good mask I can wear for that 10 hour period that’s I’ll help me breath clean air

@eastwoodco 2 жыл бұрын

@Cleric775 4 жыл бұрын

I wonder what does the Westwood channel looks like.

@KiwiCakeful 3 жыл бұрын

Does P95 filter out paint solvents like turpentine? I am taking an oil painting class. I have asthma and I want to make sure I am protected. :)

@eastwoodco 3 жыл бұрын

Hey Kiwi, I would NOT go with a P95. The P95 is mainly used to filter small particulate. I believe your best bet would be a P100 Organic Vapor cartridge filter. 3M states... "Organic vapors from solvents, such as those in paints and thinners, require a cartridge with a black label." Make sure they're new, clean, and within the expiration date. -JD EDIT: 3M also gives this disclaimer about paint thinners. "These compounds have been identified as possibly existing in both vapor and particulate phase in the workplace. Even though these chemicals would be expected to be in the vapor phase, when other aerosols are present or there is high humidity, it is possible that the vapor may be adsorbed onto these coexisting particles or dissolved in available water droplets; therefore, 3M recommends a filter for the particulate phase be used in addition to the traditionally accepted chemical cartridge. It is the user’s responsibility to determine whether both forms coexist. " Hope I could help!

@KiwiCakeful 3 жыл бұрын

@@eastwoodco Thank you so much! This is super helpful! Unfortunately I did not see your message and I had already purchased a box of 3M P95, 8577 masks thinking they would work, Do you happen to know if they make P100 without a full on respirator mask? Again thank you for taking the time to help me, I really appreciate it so much!

@dwaynebaxter 5 жыл бұрын

Hello gentlemen. When working with aluminum sulfate in its powdered form which mask would you recommend?

@scodiofficer0012 4 жыл бұрын

A p100 should so the job. Or you can just use a legitimate Gas Mask

@scodiofficer0012 4 жыл бұрын

A gas mask

@justsomeone3189 4 жыл бұрын

A p100 advanced particulate filter

@Cleric775 4 жыл бұрын

You probably need an ABEK filter with a P3 (P100) particulate filtering. But I think P2 (P97?) could be enough to filter out Aluminium dust. But since you're working with Sulphates, you are working with inorganic compounds. Make sure the ABEK filters work against that. Since Sulphates are acidic, you probably need eye protection or full-face protection. Again, make sure you're working in a supervised environment when working with dangerous chemicals. Oh, when the filters get used up or being unable to filter out the chemicals, be to replace them.

@cuties303 4 жыл бұрын

Which filter do I use for coronavirus? I have a 3m respirator 7000. Is the pink filter ok or I need the carriage/filter combos? And how long does the pink filter last?

@ronnieisfluffy4163 2 жыл бұрын

Umm for COVID you just need a normal mask a respirator will help but it works the same a a normal mask

@lomop4385 2 жыл бұрын

@@ronnieisfluffy4163 no it actually works better

@danielnelson4881 2 жыл бұрын

@@lomop4385 Maybe if the fit is better on the respirator... But a proper N95 mask that fits your face well will be just fine otherwise. Not necessary to wear a full or half face respirator when running around in public... That's just overkill on the paranoia.

@CodeRevolutionTV 4 жыл бұрын

Am I the only one here because of the Coronavirus outbreak?

@spiveydurango5437 4 жыл бұрын

@GJL30 4 жыл бұрын

@herbertwashingtonjr5562 4 жыл бұрын

😷😷😷

@meangeliadenise 4 жыл бұрын

Covid19 preparedness

@CodeRevolutionTV 4 жыл бұрын

Sounds good. :)

@asiastreets4032 4 жыл бұрын

What kind should I use for gas? I have 120 active volcanos in my country

@justsomeone3189 4 жыл бұрын

P or r (p100) (r100) organic vapor filters

@asiastreets4032 4 жыл бұрын

@@justsomeone3189 thanks, I want to buy 4 mask to have in my car, just as emergency equipment

@1gtmc 3 жыл бұрын

Which filters for playing around in the attic with possible asbestos?

@eastwoodco 3 жыл бұрын

You’ll need to be thinking about more than a mask. Bunny suits, air filtration, and hazardous material disposal as well. It won’t do any good to be protected while wearing the mask, just to leave the dust around to be breathed in later. I'm not an expert on asbestos, but I believe that it's a job better left for professionals. Please use extreme caution, even if there's only a small chance of exposure. -JD

@AnthonyJohnson-rd1rd 2 жыл бұрын

@@eastwoodco do you wear your mask every day

@MichaelsExplorations 4 жыл бұрын

For exploring with black mold ? And led paint

@colathebuilder3-652 4 жыл бұрын

Michael's Explorations P100 and organic vapour filters are the best for those.

@RaphaEl-pn8ue 4 жыл бұрын

So the middle one isn’t good for painting??

@cynnlongoria2568 3 жыл бұрын

What mask is good for blocking horrible smells

@_Only_Zuul 4 жыл бұрын

which filters and cartridges are best for covid-19 protection. i have the 3M 6502QL

@MrKaido93 4 жыл бұрын

I've herd that the 3M 2297 P100 filter's provide better protection.

@simonfernandes6809 4 жыл бұрын

@@MrKaido93 3M produce the 6035 sealed filters which are for use in epidemics - these are the filters you want. Unfortunately, they are now virtually impossible to get unless you want to pay stupid prices.

@MrKaido93 4 жыл бұрын

@@simonfernandes6809 That is good to know. Thanks for the info. I was informed by several 3M Representatives that any of their P100 rated Filters will protect the Wearer from the Corona virus. Provided the mask is properly fitted and sealed.

@_Only_Zuul 4 жыл бұрын

@Fact Checker maybe IF you have covid. they will absolutely protect you from covid.

@BartechTV 4 жыл бұрын

Which one is good for coronavirus?

@BartechTV 4 жыл бұрын

@bbb sss I was able to buy one but they only had the P2 filters all the P3 / P100 filters were sold out.

@buddyturner2262 5 жыл бұрын

What best mask two use

@packagingmaterialfactory4016 4 жыл бұрын

N95 WhatsApp 0086 15921401632

@DamxzOnYoutube 2 жыл бұрын

Can you use these to weld?

@eastwoodco 2 жыл бұрын

The Gerson half-face respirator with NIOSH Approved P100 particulate filters will do great for welding. It has a layer of activated carbon in the filter to deal with fumes. -JD

@johnwalter5875 4 жыл бұрын

KN95 or N95 only offer a 95% protection rating against particulates at .3 microns.

@Jonathan-sk2gk 2 жыл бұрын

I am going to work in cement factory . Which mask i should use?

@captmack007 2 жыл бұрын

@@Jonathan-sk2gk nothing with rubberbands.. Ok? Only a fitted silicone respirator. 3m 7000 series half mask ..they are about 43 dollars on eBay. 7000 series is silicone facepiece, the 6000 series are the same but more like plastic seal facepiece. I wear these professionally

@Jonathan-sk2gk 2 жыл бұрын

@@captmack007 tq man ❤️👍

@mwj5368 4 жыл бұрын

Thanks for a great video! To what degree does each mask shown filter CoVid19 virus? Also, how long does it take to receive them? Are they back-ordered? How much does each mask cost with shipping? Also with the disposable filters, how long would they last if you're only using them for CoVid19 going shopping? Does 8 hrs of filter life still apply?

@KIKPH4ZE 2 жыл бұрын

Ең жақсы KZfaq

Protect Yourself! Do you know when to use each style of Respirator? Plus More Safety Equipment!

Пікірлер: 334