ProX XF MESATRUSS Review & Tech Talk

  Рет қаралды 1,046

DJ Mike James

DJ Mike James

Күн бұрын

Description:
The ProX XF-MESATRUSS are Dual T-Bar Telescoping Lighting Pole Stands with Spanning Truss for XF-MESA MEDIA & XF-MESA MK2 Facades. The XF-MESATRUSS clamps to the rear vertical frame of the MESA Facades and provides a unique method of mounting lighting and other lightweight fixtures without taking up additional footprint space in the DJ area. It is constructed of durable steel and is finished in black. Fits Mesa Media and Mesa MK2 Facades. For mounting of fixtures and accessories utilize a light-duty clamp designed for 1" to 2" service. Protect truss finish when handling and using clamps. The Mesa Truss is not designed for mounting of any fixture that moves or is 8 pounds or greater. The maximum equally distributed load is 80 Lbs.
Ensure that the facade and truss are positioned on a hard stable surface, in a suitable location, on firm level ground and clear of overhead obstacles. When outdoors, secure the truss system with braces or cables, in the case of wind.
Safety Notes:
Loading on the truss system should comply with rated weights.
Lock all the safety mechanisms (safety pins, knobs)
Loads must be centered & balanced
Safety cables or chains must be installed on each item attached to the unit.
During transport, close all the sections and lightly tighten tube clamps
Do not attempt to move the facade when the truss is loaded or in an extended position.
Features:
T-Bars extend 10 ft high
2 Interlocking 5 Foot Sections of "I" Truss
Steel Construction
Black Painted Finish
All Hardware Included
80 lbs Capacity Evenly Distributed
Truss Tubing Diameter: 1 3/8"
All Metal Connectors & Clamps
Fits Mesa Media and Mesa MK2 Facades
To Fit:
MESA MK2 and MESA MEDIA Facades
Weight:
46.00"L x 5.00"D x 10.00"H
Shipping Weight: 20.00 lbs
Link to truss
www.ebay.com/itm/403984734661
#trussing
#djlighting
#myprox
#techtalk
#productreview
Music In This Video
🔻
"Ghostrifter Official - Vigilance" is is under a Creative Commons (CC BY-ND 3.0) license.
creativecommons.org/licenses/b...
kzfaq.info/love/oRhkLds...
Music powered by BreakingCopyright: • 🔒 Trap Beat (Free Musi...
🔺
list of all my dj Equipment
Seismic Audio 4 Space rack Case with Slant Top
www.seismicaudiospeakers.com/...
Rockville RPM 870 Powered Mixer
www.ebay.com/itm/Rockville-RP...
GTD Wireless Microphone System
gtdaudio.com/vhf-wireless-mic...
ProX DJ Façade
www.idjnow.com/prox-xf-mesamk...
Peavey Mains
www.ebay.com/itm/Peavey-PVx-1...
Peavey Powered Subs
www.sweetwater.com/store/deta...
Seismic Audio Mains
www.seismicaudiospeakers.com/...
Seismic Audio Subs
www.seismicaudiospeakers.com/...
ASC-L009 Crank stands
www.amazon.com/gp/product/B00...
ProX Truss Section
www.idjnow.com/prox-t-ls35vc-...
ProX T-Adapters
www.idjnow.com/prox-xt-tadapt...
9 Eyed Lasers
www.ebay.com/itm/Laser-LED-Li...
Startec ADJ Boombox fx2
www.ebay.com/itm/125176072990...
Shehd’s Football Light
www.shehds.com/products/led-m...
Shehd’s Other Football Light
www.shehds.com/products/new-h...
UKing Spider Lights
www.amazon.com/U%60King-Activ...
UKing 70wt mini moving head GOBO’s
www.ebay.com/itm/115309247272...
Seismic Speakon to Speakon Cabling
www.seismicaudiospeakers.com/...
Seismic Speakon to ¼” Cabling
www.seismicaudiospeakers.com/...
GLS Pro XLR Cables
Cedar's Link O Clamps
www.ebay.com/itm/152679871999...
Rockville R700 Fog Michines
www.rockvilleaudio.com/r700/

Пікірлер: 10
@tbmproductionsdj1
@tbmproductionsdj1 Жыл бұрын
This why I always watch your shows. Great info and how any DJ can upgrade the look of the booth.
@DJMikeJames
@DJMikeJames Жыл бұрын
Thank you!!! Always appreciated
@LeftStageProduction
@LeftStageProduction Жыл бұрын
Thanks for the video Mike. Good job of explaining the truss and clamps. I purchased the Pro X Station and truss about a year ago. I used the truss twice and found it too time consuming to setup and you almost need two people to use it. The side poles on mine got stuck and trying to clamp them to the table is exasperating, especially if you are in hot weather and have time constraints on your setup time. It was a good idea but engineered badly in my opinion. I would never recommend the truss to anyone. Mine sits in storage now.
@DJMikeJames
@DJMikeJames Жыл бұрын
Hey thanks for the comment and I agree, awesome concept however, there are several issues with the design and the misleading pipe size! Not sure why they wouldn't have made it a standard "1-1/2 or "2 not only would it be easier to transfer lighting clamps from my other ProX truss, but would've made it more sturdy, because at height it's really shake. That trussing is not mine but I was considering it for my middle of the road package... prolly not gonna go that route
@DerekTenpenny
@DerekTenpenny Жыл бұрын
Hey Mike, great review. I have that very same booth. I really like it. It can be a pain to put together if the top sections come off. I'm looking into buying this truss system. Where did you get the mounting clamps? I didn't see a link. Also I found that ProX makes a set of stands ProX XF-MStand. I would like to know your thoughts on those. Keep up the good work I'll keep watching.
@DJMikeJames
@DJMikeJames Жыл бұрын
Hey, thanks for watching and commenting! I never remove the top sections anymore... lol I used to because I didn't realize they could stay on..I'll get you the link for the clamps... are you asking about the monitor stands? Personally I don't use monitors only subs and mains, but I looked em up and ProX always delivers on quality, so if that's what you need. Personally I like the Rockville rtp32 totem package, which you can uplight and use as monitor stands...they're versatile and match our booth
@JOtothaE
@JOtothaE Жыл бұрын
Would that truss kit fit onto my Rockville Rockbooth XL?
@DJMikeJames
@DJMikeJames Жыл бұрын
Hey Joe, I'm not sure exactly, because it's made specifically for the ProX mk2 mesa booths and it's not really adjustable
@JOtothaE
@JOtothaE Жыл бұрын
@@DJMikeJames if at all possible, could you lmk what the measurements are of the area of your booth the truss clamps onto? So I could compare it to mine?
@DJMikeJames
@DJMikeJames Жыл бұрын
The real measurement you need to worry about is the width of your booth.. so that the mounting poles line up and mine is like 53in wide
Rockville XL vs Pro X Mesa Media DJ Booths
9:43
Aaron Strawn
Рет қаралды 16 М.
Betopper CLB260 Beam Moving head
19:12
DJ Mike James
Рет қаралды 292
Clowns abuse children#Short #Officer Rabbit #angel
00:51
兔子警官
Рет қаралды 77 МЛН
Зачем он туда залез?
00:25
Vlad Samokatchik
Рет қаралды 3,3 МЛН
Опасность фирменной зарядки Apple
00:57
SuperCrastan
Рет қаралды 9 МЛН
Who has won ?? 😀 #shortvideo #lizzyisaeva
00:24
Lizzy Isaeva
Рет қаралды 66 МЛН
FIRST LOOK - BassBoss Booth | NAMM 2024 I DJ NOW
9:16
idjnow
Рет қаралды 6 М.
Truss towerlift VMB TE-30 Assembly
3:21
VMBlifts
Рет қаралды 272 М.
Inside Steel City - What It Really Looks Like 🇺🇸
42:38
Peter Santenello
Рет қаралды 374 М.
ProX XF MESA MEDIA Portable DJ Facade
15:01
TheNathan343
Рет қаралды 6 М.
How I Built My Video Podcasting Studio (Complete Tour and Gear Walk-Through)
19:02
Review of ProX Multi-Size Truss Light Stand (T-LS35C)
8:53
Simple DJ Life
Рет қаралды 6 М.
This is the BEST DJ TABLE for controllers - FastSet Utility Table
10:07
Pro X Mesa MK2 Dj Facade VS Pro X XF MESA MEDIA Station
13:47
DJ Mike James
Рет қаралды 9 М.
Clowns abuse children#Short #Officer Rabbit #angel
00:51
兔子警官
Рет қаралды 77 МЛН