We so often get confused about all the engineering terms used to explain how amps, watts, impedance, and voltage play a part in powering a speaker. Paul helps us understand in simple terms.
Пікірлер: 165
@marcgabor96902 жыл бұрын
I've asked this question so many times and this is so far the best answer I've heard. The analogy of driving up a hill and having enough power to not loose speed makes perfect sense and in this case is easier to relate to than the hose/pipe analogy.
@Elevenpubg2 ай бұрын
This is the best explanation I've seen on the whole internet
@willleavitt71562 жыл бұрын
A power engineering analogy I like is voltage is the speed electricity goes through your body. Amperage is the size of the hole it leaves behind!
@jamesrobinson91762 жыл бұрын
Lol thanks for that 🙂
@hugobloemers44252 жыл бұрын
Voltage does not go, it stands.
@johnnytoobad77852 жыл бұрын
EXACTLY !
@stanbrown9152 жыл бұрын
OH GREAT...and I was starting to loose my terror of electricity. Thanks!
@user-od9iz9cv1w2 жыл бұрын
Voltage is the speed of the bullet. Amperage is the weight/caliber. A neutron can pass right through us at very high speed and do minimal damage(work). A 50 caliber will be devastating.
@chrisw38342 жыл бұрын
Wow, this was one of the coolest, most interesting and helpful descriptions on how driving speakers with an amp works. Asweome job. Thank you Paul!
@PetraKann2 жыл бұрын
The “pipe flow” analogy is also useful. The pressure in the pipe equates to the voltage and volumetric flow rate through the pipe equates to the current. Two pipe flow scenarios of different pipe diameters can be delivering the same pressure (voltage) but the larger pipe diameter must have a higher flow rate (current)
@user-od9iz9cv1w2 жыл бұрын
Great explanation. It helps laypeople understand the basic relationship. The electrical engineers may debate some of the details, but this is really helpful to lay enthusiasts.
@pierrec817410 ай бұрын
Fantastic Paul ! I could listen to him all day long. I used to learn electronics as my first studies and job at Philips Consumer Communication. If Paul had been the teacher …. ❤❤❤
@Chris-nd5se2 жыл бұрын
Thanks for the clear, detailed description of the way amplifiers drive speakers Paul
@doublet1472 жыл бұрын
By far the best 'Q & A' format video you've done in a long time.
@tomehCanada2 жыл бұрын
A great, simplified approximation to suite 99% of the people. Well done. Now after reading comments from all of the amplifier experts, let me ask all of you "how do bridged amplifiers work?" Since both bridged channels work on the same power supply the max voltage doesn't change. How does this go for those fixated on voltage? Why does the max watts increase? Where is the impedance relationship to watts, voltage and current? Where is the saturation of the power transformer come in to watts, voltage and current? Where is the power and current stage switch device power dissipation come in to watts, voltage and current? Is there such a thing as a minimum load and why? Feel free to way in with free explanations. I look forward to reading more.
@Paulmcgowanpsaudio2 жыл бұрын
Hi Thomas. I can help you a little here in this limited space. The trick with a bridged amplifier is the same as with a balanced cable (which offers 6dB more gain for the same signal). By inverting one channel and then placing the speaker between the two amplifier outputs (no connection to ground), the output voltage is doubled. This is because when the channel is inverted, one amplifier is moving away from zero in the positive direction while the other channel is moving away from zero in the negative direction, thus doubling the distance between the two signals. Think of it like two cars speeding away from each other at the same speed. While each car is only moving at 60 miles per hour, as measured between the two cars, they are moving apart at 120 MPH.
@tomehCanada2 жыл бұрын
@@Paulmcgowanpsaudio Thanks Paul. It was a tongue in cheek comment to drive the "experts" a little silly. Stay Well and congratulations on the speaker launch. Lot's of glowing comments coming out of the Montreal show.
@glenncurry30412 жыл бұрын
The typical analogy is water and a water tank on a hill. Voltage is pressure, how much water is in the tank and how high the tank is above ground. Current is how much water flows when it is released from the tank. Load resistance (impedance) is the diameter of the hose connected. But add to this, internal PS resistance is the size of the opening in the tank regardless of the hose size. A little water not very high up? Not much power available. More water in a bigger tank up higher? More power available when needed. But until water flows out, it is only pressure/ voltage. Punch a hole in the bottom of the tank and add a hose. How much water flows how quickly is determined by the size of the hole and the size of the hose. The larger the hole or hose, the more (current) flow, but the faster the water empties out of the tank! Put on a wide hose (low resistance load) and lots of water can flow out if the hole is as big. But no matter how much water pressure is in the tank and how wide the hose is, if the hole is small (high internal PS resistance), only a trickle will come out relative to that hole size. But if the hose is smaller, the same size as the hole, it doesn't matter. So you need more pressure(voltage) to provide more water flow. But the flow (current) that results depends on the size of both the hose and the hole. So even if you have lots of voltage, but a high internal PS resistance (measured in Damping Factor), the voltage will be used up by both the load and way too much used up in the PS never leaving the amp. This can be seen in comparing the 8 ohm power to the 4 ohm because more voltage gets dropped in the PS as the load gets closer to the PS resistance. Or if the hole size is close to the hose size instead of wide open.
@jamesrobinson91762 жыл бұрын
The bit about the car going uphill is pretty much spot on
@ynnektrub12 жыл бұрын
I really appreciate that you don't talk down to your audience. Thank you!
@ben23a312 жыл бұрын
Excellent description of how amps work ! 👍🏽
@herrlindner2 жыл бұрын
"sorry that was too long" ARE YOU KIDDING PAUL? Please, go on 😍
@rfpho14562 жыл бұрын
Usually very good but not really this time. Not fundamentally wrong as you need voltage to drive current (Ohms law), but it is the change in current flowing through a speaker coil that creates a magnetic field that causes the magnet attached to the cone to move, creating sound. Voltage without the ability to supply enough current quickly enough is pointless. You could generate high voltages in a preamp (tube amps do) but they wouldn’t drive enough current so you need a current amplifier stage (power amp) to move a speaker.
@jamesfoster2390 Жыл бұрын
you really helped me to understand the operation of the amp, thank you
@TheTrueVoiceOfReason2 жыл бұрын
I feel this was a pretty fair attempt at clarifying a rather complex and highly individualized set of variables - impedances, frequency, initial voltage, available current, topology, output device characteristics, dynamics, source material... it all has an effect on the final outcome. Not to the mention the deep relationship you touched on between voltage and current when fed into a load. One.thing that might have helped is the standard formula for calculating the power output of an amplifier: (V(RMS)^2) / Imp = Watts This, for anyone who has any acumen in mathematics, can be reworked to find the minimum voltage needed to get the required wattage. From there you can checking power section to see if it cab deliver.
@MichaelLHill-fd3kw2 жыл бұрын
Thanks for the knowledge you have helped me with this struggle to explain why you might need a separate power amplifier.
@spacemissing2 жыл бұрын
This is the sort of thing that should be taught in elementary schools, and anyone who couldn't explain it at least as well as Paul does in this video would not get past fourth grade.
@Roof_Pizza2 жыл бұрын
The most common way engineers get double the watts into 4 ohms from 8 ohms is to send the spec sheet to the marketing dept.
@bikemike11182 жыл бұрын
…and for all the measurement disciples to flatten the curves (on paper) ! LOL 😂
@raphaelmeillat85272 жыл бұрын
Lol. Good one! 😂😂
@ThinkingBetter2 жыл бұрын
Some brands do respectable engineering. But you are right, some other brands have a bunch of product managers in the USA leading a bunch of junior audio engineers in China.
@robertthurston68582 жыл бұрын
Finally , someone explains it to me thanks. Of the stereo mags I've read none have explained this. Kudos to you.
@bikemike11182 жыл бұрын
@@robertthurston6858 yeah,…finally!
@bingdong85712 жыл бұрын
There's a million ways to explain something and most people, (apparently all engineers) think there way is best. I appreciate your humble layman's attempt, despite all of "geniuses" letting you know how wrong or incomplete you were.
@user-gj4ei6dc5qАй бұрын
Not to be rude, and I'm not an engineer, but if I recall correctly from third grade grammar, it's 'their', not 'there'. As in, they're over there at their place. "genius"
@bingdong8571Ай бұрын
@user-gj4ei6dc5q sorry about that. I hope I didn't offend u. I think I did
@jbreezej336511 ай бұрын
Thank you!A fantastic and engaging lesson that cleared things right up for me!
@markeaton20032 жыл бұрын
Good idea. Some audio experts know nothing about electronics, or electrical engineering. I am sure that would help them. This guy named Tesla knew a lot also.
@blueflame00032 жыл бұрын
I hate short videos....can't learn anything.......thats why teaching videos are long....great job teach....thks
@JerryRutten2 жыл бұрын
No, no and no! It is not the voltage and it is not the power! It is the current! Which is known since Ørsted, and that was more than 200 years ago. That's why it is called an electrodynamic driver (moving charge = current). That's why the force factor is in Newton per Ampere. That's why long cables (extra series resistance) and heated voice coils (extra voice coil resistance) lower the output (if it was the voltage a heated voice coil would raise the output). And SPL is not a power quantity, so it is not the power. I think these kind of questions should be answered by Chris...
@marianneoelund29402 жыл бұрын
Paul spent plenty of time discussing the importance of current. There is nothing wrong with emphasizing the concept of voltage, since that is what makes current possible. And whenever there is movement of a voice coil in a magnetic field, it produces its own EMF, which must be overcome by the voltage provided by the amplifier. So when cone velocity matters, so does voltage.
@JerryRutten2 жыл бұрын
@@marianneoelund2940 All true! But all besides the point! Yes, you need voltage. Yes, you need power. Yes, you need current. But it is not that “The most important part in the relationship between the power amplifier and the speaker is the voltage.” It is the current (for electrodynamic drivers, and charge for electrostatic drivers). And yes, “It is so easy to get confused”. But this is just physics. There is a direct relationship between current, the force factor and the force on the voice coil. That’s why it is called the ‘force factor’ and that’s why its unit is Newton per Ampere. And if you use voltage to control a driver, you get free (and unnecessary) distortion (an awful lot of IM distortion), compression and modulated noise. Edit: and an unstable (electromagnetic) damping, and an unstable passive crossover.
@robertfiorellino60702 жыл бұрын
Really appreciate you knowledge and your making it available to us. Thanks much.
@Hudsonlee19542 жыл бұрын
Thanks Paul. You are the best.
@Ricky-cl5bu2 жыл бұрын
Brilliant very well explained Paul
@yasquall86712 жыл бұрын
The "water tank & pipe" analogy is a useful and pertinent example to help understanding the voltage/current/impedance relationship. Suppose the loudness of a pair of speakers is fixed and this implies that the required voltage needs to be maintained to a certain level. Since the LS's impedance varies during its playing, the diffrent amount of current must be drawn from the amplifier to sustain the voltage. This explains why the amplifier needs to provide double the power when LS's impedance drops from 8 ohm to 4 ohm. I got really confused when it comes to the Mcintosh amps with Autoformers. These Amps are to provide consistant power whatever the LS's impedance is, and this function seems to be contradictory to the doubling-down requirement. Anyone can please share some knowledge here? Thanks.
@user-ex9zm7bg3x2 жыл бұрын
I think the exact same thing about Macs. Same power into 8, 4 and 2 ohms. Seems off.
@paulsebring69302 жыл бұрын
Power is the time rate at which energy is produced or consumed. One Watt power is one joule energy per second. Electrical energy from the amplifier is transformed into motion of the speaker (kinetic energy) and heat energy in the speaker. The motion of the speaker produces sound waves in air. Voltage is electromotive force. Voltage is the amount of energy per electric charge. One Volt is one joule energy per coulomb electric charge. Current is the time rate of flow of electric charge. One Ampere or Amp is one coulomb electric charge per second. In simplest terms, the power in Watts equals the voltage in Volts times the current in Amps. Joules energy per second equals joules energy per coulomb electric charge times coulombs electric charge per second. An amplifier is a voltage source with voltage and current limits. The amplifier voltage output is independent of the load impedance within the voltage and current limits. The load impedance determines the current and power output within current and voltage limits. An amplifier provides voltage gain. The amplifier increases the voltage output of the preamplifier to drive the speaker. The amplifier must provide enough current to drive the impedance of the speaker. When the amplifier voltage or current reaches the limit, the voltage amplitude no longer increases. The audio signal waveform is distorted when input signals and amplifier gain push the amplifier to produce voltage or current greater than voltage or current limits. The voltage in Volts equals the current in Amps times the resistance in Ohms. This is Ohm’s Law. The symbol for Ohms resistance is Greek letter Omega Ω. Speaker impedance is complex. Resistance is a scalar. Impedance is a vector with magnitude and phase. Speaker impedance changes with frequency. Speaker nominal impedance is a simplification that allows us to approximate complex speaker impedance as resistance. The symbol for Ohms impedance is also Greek letter Omega Ω. Music signal voltage waveforms are complex. Music waveforms are made up of many fundamental frequencies and harmonics that start and stop and increase or decrease amplitude and frequency over time. Root Mean Square is a mathematical way of calculating the effective average voltage of a continuous periodic alternating waveform. RMS is different for different waveforms. For sine waves V RMS equals V peak times 1/√2 or about 0.7071. For sine waves V RMS equals V peak -3.01dB where dB = 20 log 1/√2. For square waves V RMS equals V peak. For square waves V RMS equals V peak -0dB. For triangle or sawtooth waves V RMS equals V peak times 1/√3 or about 0.5774. For triangle or sawtooth waves V RMS equals V peak -4.77dB where dB = 20 log 1/√3. For complex music signals V average equals about V peak -20dB or V peak times 0.1. Amplifier power is rated driving 8Ω resistors with sine waves. Amplifier rated power is a simplification.
@kas47512 жыл бұрын
This was enlightening!
@KoreytheFunkyRayda2 жыл бұрын
Thank you Paul. Finally I get it!
@davidstevens78092 жыл бұрын
paul I test preamps with a 4 ohm speaker resting on my shoulder and ear... haha.. i honestly start at the front and listen to signal as i go through the audio path.. i give you..i have it low volume...any preamp can easily play 4 ohm speaker anywhere in the path..
@tomehCanada2 жыл бұрын
A normal ratio of preamp output impedance to amp input is 1:10 to ensure low demands on the preamp while delivering an accurate (undistorted) signal tp the amplifier. Why load a preamp with a 4 ohm load to test? When I was a kid I used a speaker as a microphone. Best use? A practical way? Useful to test speakers? No, no and no. Fun, yes.
@curtchase37302 жыл бұрын
Wow! You did a gr8 job IMO explaining a very tuff subject! There is a lot going on between an amp and the speaker. A power amp sees a conventional loudspeaker as a super fast variable resister. The resistance changes as the frequencies change, hence impedance. Am I right? All things the same, A speaker with a rated impedance of 1Ω could get a away with a lower voltage, but needs huge current to play as loud as a 16Ω speaker, which needs more voltage, but less current (kinda how WATTS come into play)! The amp's power supply rail voltage(s) has some influence on the amps output power. So, why is it that many modern car amps brag about being 1Ω stable, but average home amps shy away from anything under 4Ω? Kinda confusing to me. Thanks!
@johnnytoobad77852 жыл бұрын
Most car amps are "class-D" type amps. Class-D amp designers like to brag a lot on how low (in impedance) their amps can go. A few are actually stable at 1ohm. Just a few. Most home audio amps are (still) class-AB. VERY FEW class-AB amps are stable under 4 ohms. Subwoofer amps (for home) can be class A/B, or D. But class-D is now becoming the norm for them. Class-D amps are much more efficient under load and high volume than class-AB. That's why they are preferred for car-audio. Less power drain. However many audio-heads prefer the "sound" of a well designed class A/B amp for full range music. Class-D amps generate ultra-high frequency noise internally that may be embedded in the output signal. But that noise is not really audible in a car or from a sub-woofer.
@curtchase37302 жыл бұрын
@@johnnytoobad7785 Thank you for your input! Everything you said makes sense.
@andrewwalsh58372 жыл бұрын
@@johnnytoobad7785 Very true with class d amplifiers, my dad passed away many years ago and he loved mantovani and his orchestra classical music, i often listen to it as its nostalgic, but on class d on the higher frequency notes, you can hear the noise on the sound, only very slight but its there, i have a dynacord powered mixer, high end ev audio, not really designed for the house but that has a class h power amp inside, really class ab, the supply rails adjust the voltage depending on demand, but when i play the classical music on that the sound is pure, that slight noise on the higher notes isnt there and sounds much warmer too
@davej92282 жыл бұрын
In the engine analogy RPM is voltage and amperage is tourqe, wattage is horsepower
@user-ex9zm7bg3x2 жыл бұрын
perhaps amperage is displacement and wattage is fuel available?
@davej92282 жыл бұрын
@@user-ex9zm7bg3x food for thought perhaps displacement might be capacitance
@user-gj4ei6dc5qАй бұрын
And the hill would be impedance! Except the hill would actually be resistance. The car isn't trying to go back and forth from 20 to over 20,000 times per second.
@samgates20592 жыл бұрын
Great explanation and it is simple until we start putting crossovers in and the impedance gets complicated.
@marianneoelund29402 жыл бұрын
Even without the crossover, the impedance of a driver in a ported enclosure is already complicated.
@Leery_Bard2 жыл бұрын
As a matter of fact, AC/DC taught us that it isn't high wattage but high voltage rock 'n' roll.
@threatripper2 жыл бұрын
Very informative........👍👌
@stevenwex89667 күн бұрын
Trying to learn, so? Speaker Watts, Amp Watts and wall Watts are all related, there is no special Wattage for sound, so a 100percent efficiency 100Watt sound system would pull 100Watt from the wall but if the speakers went from 4ohms to 8ohm the sound system would now be at 50Watts depending on amp rating. Buying a Nobsound 4-Channel 200Watt Amp that comes with a 110Watt 24Volt power supply, so I could ran 2 Channel at max or 4 Channel at 50 percent, so I would be thinking I'm leaving some power on the table, so maybe need 200Watt PSU. I'm an electrician but never done anything with audio.
@ianorigbo76172 жыл бұрын
You made it simple ✌️
@brotherbrian5625 Жыл бұрын
This was great... Thankyou
@mikevincent63322 жыл бұрын
Voltage (potential difference) across a load causes current to flow in the load - (speaker) - the resulting combination of voltage / current / resistance = power in watts. To calculate the RMS power into your speaker, you take the peak to peak voltage, halve it, (because the negative and positive half cycles are equivalent) multiply it by 0.707 to convert peak voltage into RMS voltage, and then square it and divide by your speaker impedance. For example 60V peak voltage across 8R speaker: 60V x 0.707 = 42.42V (RMS volts) squared = 1799.45V divided by 8 Ohms = 224.93Watts RMS into 8R. The peak current will be 60V divided by 8R = 7.5Amps (this will be the peak current at the top of the + half cycle and also - half cycle) - so the amp must be able to provide the 60V peak to peak voltage at 7.5 amps peak current in order to deliver the 224W RMS
@RacingAnt2 жыл бұрын
Either your calculation or your description is wrong. You say to halve the peak-to-peak voltage, yet the calculation is based on the full peak-to-peak voltage, not half of it.
@lonniefarmer70672 жыл бұрын
Thanks Paul!
@chrispytelomeres98632 жыл бұрын
Thanks.
@frankcaserta8122 жыл бұрын
Thanks for that explanation!
@johnsenchak14282 жыл бұрын
transistor base current times beta = collector current
@jeffkalina7727 Жыл бұрын
As I look at any amplifiers specs where do I find the rating for the current?
@David-kf5gk2 жыл бұрын
Your good Paul Bravo
@NoEgg4u2 жыл бұрын
@4:38 "Amps * volts = watts" Is there an ideal ratio (or balance) for amps and volts? In other words, would 2 amps * 20 volts yield the same results as 20 amps * 2 volts? Or to put it another way: -- For every amp, how many volts would you want? or -- For every volt, how many amps would you want?
@marianneoelund29402 жыл бұрын
Volts are set by the amplifier. Amps are determined by the speaker load. The ideal case is using a speaker which will draw most of the current that the amplifier is capable of without distorting. The amplifier's power spec, across various load impedances, will give you some guidance here, but if you want to approach an ideal situation, things get rather complex.
@user-od9iz9cv1w2 жыл бұрын
I think it is as Paul suggested the other way around. How loud do you play? What is the efficiency of your speaker? What are the highest dynamic sounds you try to play? If you need to (for a microsecond) drive 30V through your speaker to hit that bass drum it will dictate how many amps are required. Those big swings won't play, and you'll hear it in diminished dynamics or simply missing a couple octaves on the bottom where the impedance is high. On average you'll play at much less than 1 watt, but if you want full range and full dynamics, you'll need the capability for a lot more amps if you want natural sound.
@rfpho14562 жыл бұрын
Volts=current x impedance, or current = volts / impedance
@vladimirkievtorres22332 жыл бұрын
How to know my speaker's wattage and voltage? It don't have a manual and sticker behind it. All I know it is 12 ohms.
@emonymph6911 Жыл бұрын
My AMP is rated for up to 300W across both channels. It has a 36V 6A power supply connected to it so 216Watt total or 108W per channel. Now my speaker accepts max 60W. There system has no preamp: PC > DAC > AMP > Speaker. But the AMP has a VOLUME KNOB, if I lower the AMP volume will it lower the W going out to my speaker? Will this affect the voltage as well? And would it be better to downgrade the power supply to 24V 5A so it caps at 120W or 60W per channel? Will that harm the AMP which is rated at up to 300W (for both channels). Thank you!
@dre77672 жыл бұрын
If im understanding this correctly a country that has 240 v power supply will have more current coming out of an amp or is the voltage coming out the amp
@costykali69302 жыл бұрын
what abt those Psb image bookshelf ?
@robertdyer85172 жыл бұрын
Thank you !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@nottusleinad2 жыл бұрын
Hi Paul... if power is dependent on voltage, why is the Sprout 100 power output the same in the US as it is in the UK where the mains AC supply is more than double the US standard ? Surely to compensate for the lower voltage at 110Vac you're not consuming double the current (20Amps ?) from the mains socket ?? 20Amps is a LOT to draw through a power cable. I realise the answer will be related to the transformer, but WHY couldn't amplifiers in the UK generate double the power output ?
@jprkzoo34632 жыл бұрын
Because at a given load on the electrical infrastructure, at double the supply voltage they are drawing half the current from the wall. The consumption in wattage (power) is still the same.
@johngranato26739 ай бұрын
How about, for instance, 20 volts at 10 amps or 25 volts at 8 amps? Both are 200 watts?
@punkish711 ай бұрын
So how does the uneducated figure out how much voltage an amp puts out when all that is advertised is watts? Interesting video, and many thanks for the time spent on it, but how does a consumer know how manufacturer is coming up with numbers (in watts!)
@stpd19572 жыл бұрын
That was excellent
@13243902 жыл бұрын
Hi Paul, thanks for your enlightening lecture. One question: Why do some tube amps have separate binding posts for 8 and 4 ohm speakers ? If I have a pair of 6 ohm speakers which binding posts should I use ?
@13243902 жыл бұрын
@@Wizardofgosz Thanks Richard for throwing light on the subject. I'm a novice and to play safe I currently have my 6-Ohm Elac Uni-Fi 2.0 UB52s connected to the 8-Ohm posts of the Willsenton R8 tube amp, rated at 25/45 wpc in Triode/Ultralinear mode. Just wonder what difference it would make hooking up to the 4-Ohm posts.
@marianneoelund29402 жыл бұрын
@@1324390 "Playing it safe" would actually be connecting your speakers to the 4-ohm output. Using the 8-ohm outputs presents your amplifier with a modest overload. You might achieve lower distortion using the 4-ohm output, but also less power - but both of these are subtle differences which would be difficult to hear. There is no harm in experimenting and trying both outputs.
@13243902 жыл бұрын
@@marianneoelund2940 Thank you, Marianne. I'll take your advice and do the switching. Hope it yields better results sonically, however subtle they may be...
@user-od9iz9cv1w2 жыл бұрын
@@1324390 Try the 4 Ohm tap and the 8 Ohm tap. The one that sounds best is the one to use. :)
@13243902 жыл бұрын
@@user-od9iz9cv1w Sure ! 👌
@TheDanEdwards2 жыл бұрын
01:29 "More voltage more sound, it's as simple as that. End of story" - not a very good (or accurate) way to describe how an _electrodynamic_ speaker works. I get that Paul is looking for ways to answer questions with using a few technical definitions as possible, but here is a case where trying to answer a question may make things worse. At the end of the video Paul mentions that power is the product of current and voltage. Might as well _start_ with that. Explaining the physics of how an amplifier+speaker system works probably can't be squeezed into a 7 minute video, in which case perhaps it's best just to give directions (such as, shop for amplifiers with power ratings more than the minimum recommended by your speaker manufacturer.)
@JerryRutten2 жыл бұрын
Not a very good way to describe? You're mild. It is complete nonsense! It is the current, the current only! Known for more than 200 years, since Ørsted.
@RacingAnt2 жыл бұрын
@@JerryRutten Not true. An amplifier that can deliver 200 amps, but only swing that by 5 volts is not going to work very well with real-world amplifiers.
@JerryRutten2 жыл бұрын
@@RacingAnt Yes, you need voltage. Yes, you need power. Yes, you need current. But is the current that determines the output. It is just physics, known for more than 200 years... An electrodynamic driver has a parameter that's called 'force factor', it's unit is Newton (force) per Ampere (current).
@RacingAnt2 жыл бұрын
Sorry, Dan, just looking at power ratings is not helpful at all. An amplifier that can deliver 100 watts into 8 ohms might look like a great match for an 80 watt pair of speakers. But, if it can only deliver 3.5 amps (all that's needed to make 100 watts into 8 ohms), it's only going to deliver 50 watts into 4 ohms, and 25 watts into 2 ohms. So, at various points on the speaker's frequency response, it's going to be very, very lacking. To truly drive a speaker, it needs to be able to deliver 7 amps into 4 ohms (200 watts), 14 amps into 2 ohms (400 watts), and 28 amps into 1 ohm (800 watts). If it can do this, the output voltage will remain constant (roughly 28.6 volts) into every load. That is why Paul says that voltage is everything - the ability to drive a constant voltage into any reasonable speaker load is what's needed to effectively drive a speaker. It's why my 50 watt amplifier is more capable at driving my floor standing B&W speakers than most 150 watt receivers.
@davidlane11692 жыл бұрын
'Ole Audiophile here, it's a difference in basic audio philosophy at the start of the build. I am a biased individual toward multichannel, not stereo. This puts me at general odds with the entire purist movement, that would be great odds except the fix is in. I build from an HTR instead of a stereo preamp. Those of us that head down this path tend to use far more than one single stereo amp. From here, it may seem crazy to the un-initiated. That should get some comments...
@davidlane11692 жыл бұрын
Keep in mind, the open minded believe every multichannel system includes a stereo. Purist hate the very idea. It's been that way pretty hardcore since the mid-seventies when power amps first started to wander into the mainstream market.
@Dj-Jon-E-C2 жыл бұрын
good video so guess if not got enough amps it's going to run low on volts to keep up and run out.
@jctai1002 жыл бұрын
The real problem is everyone who isn't educated on the matter tries the reductionist approach: Gimme one thing that trumps all other properties. You can't really talk about electricity that way, you can't really talk about one without the other. Electricity also has magnetic properties that will affect it's interaction with electronic components.
@svencabrera85562 жыл бұрын
Hi paul Love your videos. From Philippines
@RoderikvanReekum2 жыл бұрын
Forget Paul, You are FIRST congratulations on this amazing performance you get 🥇🏆🍾🥂👏🇵🇭 You were so fast to click!
@erdincyilmazel2 жыл бұрын
Why does impedance on the speaker go up and down?
@steveurbach30932 жыл бұрын
Why does a 5.1 channel 150W (per channel) only have 325W power in? (I understand that the rating applies to Front, but there is still 3 other speakers, even if those are at idle).
@marianneoelund29402 жыл бұрын
The problem is that they are only giving the numbers, and not the conditions under which they occur. They probably mean that the amplifier can produce 150w per channel peak output while reproducing music where the average power is much lower, thus allowing the power draw to be 325w or less. Testing the amplifier with steady-state signals would produce much different results.
@AmazonasBiotop2 жыл бұрын
The problem is that amplifier manufacturer says it got for example 20 Watt. As a consumer we will never know if amp A is getting 20 Watts with 10 volts * 2 Amps.. Or amp B also 20 Watts but with ~6.7 volts * 3 Amps. But we CONSUMERS never get that info. Therefore it is pointless to say get one amplifier that has a lot of current (amps).. That is hidden and we will never know and makes the advice useless: "Get a amplifier with high current OR those speakers need high current" Yes you can go with higher wattage and hope that the current is larger than the one with lower wattage. When the lower wattage can have higher current but lower voltage so it will produce lower wattage.. But we will never know. If not somebody says that a amplifier always has the RATIO X between voltage and current. And what is the RATIO for consider a amplifier a CURRENT driving amplifier as the opposite to the far more common voltage driven amplifiers.. (That Avantgarde has for example.) Paul must understand that he is teaching the simple stuff and we all understand that by now. But the interesting stuff is as mentioned above. So focus on that and move on.
@brainache5552 жыл бұрын
is it equally good if an amplifier solid state or tube gives the same watts in 8 as in 4 ohm?
@BB..........2 жыл бұрын
Power should double when impedance halves.
@thomasandersen17842 жыл бұрын
I have the same issue, understanding this? My Amps - Lavardin MAP'S (mono), put',s out 56W pr unit, and still they handle almost every hunger Wattes speakers out there, incl. electric static. How come? ✌️❤️🇩🇰
@rfpho14562 жыл бұрын
They probably have big power supplies that can deliver big changes in current quickly if needed. He wasn’t really right to focus on voltage alone.
@eugenepohjola2582 жыл бұрын
Howdy. May I be a smartxxx ? Voltage and Amperege are not two independent things. Voltage drives amperege. And amperege drives the speakers. The PA must have enough amperege in stock, for the voltage to push through the speaker. Regards.
@guywilloughby54432 жыл бұрын
It would be similar to RPM's and torque. You need more torque to go up the hill.
@PSA782 жыл бұрын
No, it's always horsepower. Torque is only of interest for looking durability as it's the static piece of the power. Look at a car on a film, if it's playing it horsepower, if you pause and can observe something happening to the car it's torque. :)
@BB..........2 жыл бұрын
@@PSA78 HP is just a number (torque x RPM) / 5252. Torque is always what matters.
@PSA782 жыл бұрын
@@BB.......... Torque is trapped gas over a single combustion, hp is trapped gas over time. The laws of thermodynamics dictates the rest. Torque means nothing outside research.
@BB..........2 жыл бұрын
@@PSA78 It's still torque doing the work. HP is just a number spit out of a formula.
@PSA782 жыл бұрын
@@BB.......... Horsepower is from the start the observed energy; load, distance, time. And that is still the case with engines. Work done is horsepower, or kW, just like with electric devices. A gearbox will take care of the rest.
@Phil_f8andbethere2 жыл бұрын
Think of it as e=mc2. Where e=Watts, m=Volts and c=Amps. - Simples!
@ianhaylock74092 жыл бұрын
That would be Watts = (Volts * Amps) squared That is incorrect the formula is P= I * V
@Phil_f8andbethere2 жыл бұрын
@@ianhaylock7409 Yes, I forgot to say ignore the squared bit ! . It was the concept I was trying to convey, albeit badly.
@PutGodFirst21122 жыл бұрын
V = IR
@Antoon552 жыл бұрын
The formulas are simple. But what does physically happen? That's very hard to grasp. I mean the flow of electrons etc.
@stimpy12262 жыл бұрын
I guess I’m going to throw a wrench in your answer. It has been discovered that electrons basically do not move when voltage is applied they just jiggle back-and-forth which is what is called current flow. It may be confusing but try to visualize it.
@mykhailoskachkov59462 жыл бұрын
This can be explained much easier way. Power depends on current and voltage: P = I * V But current also depends on voltage (not only but still): I = V / R So after all P = V^2 / R As long as R (resistance) is constant (well it can be different for different frequencies but for certain frequency it is constant) it is the V (voltage) that makes a difference on overall power (P). So if your amp is good enough that it can provide necessary voltage for any frequency (i.e. any impedance that your speaker factually has) you will have good power level no matter what. PS. Impedance is not 1:1 to resistance, but for this explanation we can count this as the same
@johnnytoobad77852 жыл бұрын
But voltage depends on current: V = I * R. And P = I^2 * R. So long R is constant it's the I (current) that makes a difference in Power.
@mykhailoskachkov59462 жыл бұрын
@@johnnytoobad7785 current is secondary to voltage, not the opposite
@hugobloemers44252 жыл бұрын
Study Ohms law and it will be all clear.
@JerryRutten2 жыл бұрын
Study Ørsted's Law and it will be clear that it is the current!
@JerryRutten2 жыл бұрын
Countermeasures are only effective when the assumptions are true. If you lower the output impedance, because you think that an electrodynamic speaker is driven by voltage while it is driven by current, it is not only not effective, it is actually counter effective. Then, you make things worse! If you have a very low output impedance (a high damping factor) the performance of the speaker (and the crossover!) is very sensitive to temperature of the voice coil, different types of cables and modulation of the voice coil inductance, and electric damping that is all over the place. Whatever the damping factor of your amplifier is, when the temperature of the voice coil is raised with 10ºC (by playing some music) the damping factor is already only 25, at 50ºC only 5 and at the maximum power rating (party levels) around 1! Imaging what this does to the frequency response. And besides that, at maximum power rating the voice coil resistance is about doubled which changes the crossover frequency of the crossover filters with an octave! And, the better the driver, the more temperature and power it can handle, the more it changes the voice coil resistance (at the maximum power rating).
@medonk12rs2 жыл бұрын
I struggle with Paul's statement "it's the Voltage! Trust me". Of course I trust Paul, but magnetic fields around conductors are created by current (=amps), not electric potential (=volts). Probably I would need to think it through properly form A to Z to understand Paul's advice he's giving, must have to do with the way typical electromagnetic dynamic speakers work.
@RacingAnt2 жыл бұрын
How do you get the current through the coil of wire? From the voltage across the coil. If the voltage collapses towards zero, because the amplifier can't deliver enough current, no current, no electro-magnetic field, no movement, no sound. So, the amplifier needs to be able to deliver a stable voltage into any impedance that it's likely to find in a speaker. Does that make sense?
@medonk12rs2 жыл бұрын
@@RacingAnt What you explain makes sense, yes. What I am still struggling with is how to understand e.g. "bass control" of big, beefy amps vs. "loose / flabby" bass of too-small-for-the-speakers amps.
@JerryRutten2 жыл бұрын
You are right, and Paul is horribly wrong. An electrodynamic driver is a current driven device. That’s why the force factor of a driver is specified in newton per ampere. You can choose to drive a loudspeaker driver with a voltage source (where the current follows what is needed) or with a current source (where the voltage follows what is needed) as done since 1989, with much better performance, in terms of distortion (especially IM distortion, question: why is it that IM distortion figures are never published? They are huge!), compression, modulated noise, bandwidth, stability in frequency response, etc. The extra benefit is that with a current source there is no electric damping, which creates extra distortion and modulated noise and is very unstable. A heated voice coil leaves no electric damping left (a temperature rise of 10°C brings electric damping down to 25, no matter the damping factor of your amplifier, and 25°C down to 10!). Every other way of damping gives more stability, thus better dynamics.
@medonk12rs2 жыл бұрын
@@JerryRutten I am not anywhere close to judge about electrical engineering stuff (being a mech. engineer), but I guess Paul tried to provide some short cut conclusion here. In a new video he gets a little more into details, see kzfaq.info/get/bejne/bbuilMiCzMCdo5c.html .
@JerryRutten2 жыл бұрын
@@medonk12rs That video is about power amplifiers not about electrodynamic drivers. Almost all power amplifiers are flawed, because of the false assumption that electrodynamic drivers are voltage driven. Almost all electric engineers make that mistake. And you, as a mechanical engineer, made the right assumption that an electrodynamic driver is current driven!
@johnpeers65402 жыл бұрын
F=BIL
@johnsenchak14282 жыл бұрын
power = volts x amps / volts AC (rms) squared /speaker impedance =watts
@timothymitchell72502 жыл бұрын
I'm having a hard time reading the equation in this form, but i knew there had to be something different vs. a standard electrical circuit. I've seen specs of well regarded amps (Paul even uses them) that did not compute using max voltage and max current. Those two values also do not account for a change in watts due to the load. Thanks.
@johnsenchak14282 жыл бұрын
@@timothymitchell7250 First one is Ohms Law volts times current equals watts and the other is measuring the wattage out of a amplifier AC volts on the output terminals squared divided by the speaker impedance in ohms
@bhmptn20062 жыл бұрын
another conceptualization, borrowed from AvE: "Yer elechicken will tell ya it's just the Angry Pixies what come orta ta wall socket that'll get that ol skookum amp ta chooch them speakers right proper."
@666kty32 жыл бұрын
ELECTRONICS 101.
@ThinkingBetter2 жыл бұрын
Humans eat food to get energy to run our bodies. Power is energy per time. While you are watching this comment, you will use around 100 Joules of energy per second, which is equal to 100 Watts. Yes, your body is running a power consumption of around 100 Watts right now. When you run you use perhaps 400 Watts or even more. Likewise, speakers need power (energy per time) input to move their cones and playing louder needs more power. The reason voltage is what Paul considers most important is that speakers are normally tuned to be driven against voltage representing the sound amplitude. However, some people are of the opinion that speakers should be driven by current being a representation of level as this can reduce voice coil thermal coefficient issues and other artifacts. No matter which method, ultimately, as your body, with no energy (or power) no motion. You can only run as long as you have energy available in your body to consume. It's like an electric car. What accelerates it is power and not the battery voltage.
@JerryRutten2 жыл бұрын
"Some people are of the opinion that speakers should be driven by current." ?? Everybody, and at least the Danish people (!), should know, since Ørsted (since more than 200 years ago), that it IS the current. * SPL is not a power quantity (so power is not linear with SPL) * It is called electrodynamics (moving charge = current) * Ørsted’s Law: F = Bl x i * Unit of the force factor (Bl) of an electrodynamic driver is N/A (or Tm) * And via network analysis * A series resistance (long cables) lowers output * A heated voice coil (higher voice coil resistance) lowers output
@ThinkingBetter2 жыл бұрын
@@JerryRutten OK, great to see you here and of course I can agree with you on the laws of physics involved :-) I'm not promoting any particular camp of opinion of voltage-drive vs current-drive, but your speaker cones won't move any air without power like your car will not move without power.
@JerryRutten2 жыл бұрын
@@ThinkingBetter You’re not promoting science?? My claim was not, that you don’t need power. You need power to overcome resistance c.q. impedance. The question was what makes the cone move, and what determines the output, the SPL… And that’s the current, the current only (to be precise: the only electrical quantity).
@ThinkingBetter2 жыл бұрын
@@JerryRutten I like to look at things with a perspective of the 2nd law of thermodynamics. There is energy transfer needed for any continuous motion of a voice coil. The kinetic and potential energy captured in the air molecules moving back and forth following the sound pressure waves through air comes from the power amplifier, with a lot of losses e.g. heat in the voice coil. Sound energy in a volume of space is the sum of the potential and kinetic energy densities integrated over that volume. You can have 1000 RMS Amps @ 1kHz to a speaker, but if the voltage is 1 RMS pico Volts, the 1kHz will not be audible.
@JerryRutten2 жыл бұрын
@@ThinkingBetter My claim was not, that you don’t need power…
@johnsenchak14282 жыл бұрын
What happened to that Jennifer chick ?
@BlAcKpHrAcK2 жыл бұрын
At times, it is now possible for me to perceive the Earth and other planets eating themselves (reforming) from the inside out, due to the high intensity of charge that keeps us ..stuck to her dress, with charge gradient. Pressure and heat, are energy by proxy of materials, a hot planetary core responsible for the emission of charge gradient that anchors the Moon as well as the inhabitants of Earth. For me there is one major question to answer, Watts to weight. What are the energy costs of charge gradient interactions for differing materials, in Watts rather than Joules that pertain to Maxwell's thermodynamics, energy by proxy of materials). Refusing to fall for gravity, where charge attracts.
@meutubedou2 жыл бұрын
And maybe you also don’t know that molten metal has NO magnetic properties so stop regurgitating ridiculous nonsense trying to sound smart.. That’s pathetic… Educate yourself!
@BlAcKpHrAcK2 жыл бұрын
I have solved more problems with filed more patents than the scientists that are busy touring and not contributing.
@pjf79432 жыл бұрын
It's a good thing you have talented people working for you.. LOL! As always you didn't answer the question. You need to educate yourself before offering advice..
@scottyo642 жыл бұрын
Electrical engineer not educated......did you watch the whole video?