Pt.2 ATV CV Boot Replacement At D-Ray's Shop

No video

Pt.2 ATV CV Boot Replacement At D-Ray's Shop

Рет қаралды 360,783

Күн бұрын

All modern ATVs use CV shafts in one form or another, this Yamaha 660 Grizzly has a total of ten! They are easily torn, and if left un checked will ruin the CV joint. They are not hard to replace, as you will see.
Thanks for watchin' Don't miss Parts 1 and 3
I created this video and I own all rights to all content in the video.
Music provided by : Kevin MacLeod incompetech.com...
Name of tune "Cold Funk", and "Delay Rock" Kevin MacLeod (incompetech.com) Licensed under Creative Commons "Attribution 3.0" creativecommons...

Пікірлер: 95

@KimCook-cd1fs 3 жыл бұрын

Ray, you did an excellent job of how to, from start to finish

@BWWGL9 7 жыл бұрын

Thanks D. RAY,,,,,,,, very professional presentation, without all the UNNECESSARY ANNOYING MUSIC.... I can hear you clearly and see what you were doing.

@darthnatas953 Жыл бұрын

As far as I am concerned, you sir are a frickin surgeon.

@johnsmith-qh3vq 6 жыл бұрын

perfect I like the whey you show every step. thankyou very informitive

@palmettofarmer 8 жыл бұрын

Mr. D-Ray....I found your instructional very informative and easy to follow along. Thanks for such a positive attitude and enthusiasm that makes you listen even if you don't have a project. Enjoyed sharing with my 17yo son without tensing waiting on the next group of curse words to being blurted out. Great work! 5 ☆minimum, more like 10!!

@palmettofarmer 8 жыл бұрын

Where do your recommend buying Honda ATV parts?

@chocolate_squiggle 2 жыл бұрын

If you're worried about your 17yo hearing curse words at that age you're setting him up for a lot of bigger problems later on in life.

@susiehill7316 28 күн бұрын

Great tutorial. I just replaced my axle cause I did t know how to do this. Could’ve saved a pile of money

@user-rv1he6vt4c 6 жыл бұрын

That's what the doctor ordered! Thanks a lot for your sharing.

@mikviss5711 8 жыл бұрын

D-Ray, great video… very helpful Thank You!

@scottmccormick2565 Жыл бұрын

Great vid D-Ray.If you teach Gods word the way u explained the cv axle repair oh boy.

@timjones1878 5 жыл бұрын

Great video!! it really helped me replace my c.v. boot's..would have been tough without your help..thanks..

@davidgower6170 10 жыл бұрын

Top notch vid, many thanks

@garyclagett1848 5 жыл бұрын

Great video build of the cv boot repair! Your instructions are clear and understandable, thanks!

@eclipser2004 6 жыл бұрын

Great and helpful video. I would not reuse either boot if I went through all that to take it all apart. I figure if one boot is gone the other must be close to going.

@Joel3436 5 жыл бұрын

not if you ripped it on sticks

@furfeelings 11 ай бұрын

Same here! If I'm going that far it'll all be new when it goes back on!

@MichaelAyers-jj9hx 4 ай бұрын

Thank you. You make it look easy!

@franksenter9838 9 жыл бұрын

Other then some difficultly removing the inner bearing without use of vice, all went well. Great demo! thanks..

@insaneasylum7898 4 жыл бұрын

Excellent job explaining everything in detail. I'm hooked

@derekperkins4420 8 жыл бұрын

thanks Jason , that was very helpful because I am working on a Yamaha wolverine right now.

@FlightSergeantRose 8 жыл бұрын

Excellent video. Everything is explained quite well.

@rustycherry12 3 жыл бұрын

Best video on this subject... thank you!

@aristofilosa9854 8 жыл бұрын

thank you D-ray ,it was very helpful your video !! i have SYM 600 quadrider i'll use your informations ....

@wademoulton5109 4 жыл бұрын

Thanks great video. I wish I could understand what made 44 people dislike this video. How can you dislike something made to help people.

@maquisard2b266 5 жыл бұрын

Thanks a lot from France, i was very interesting by your movies. instructional are very informative and i can do that now on my engine. thanks for your time to make that.

@jchefboyardee 3 жыл бұрын

Very informative and attention to detail video! Thanks

@JasonBreeland 6 жыл бұрын

These videos were so much help. Thank you for sharing!

@johnhenderson299 2 жыл бұрын

Super great video

@Ranger42 6 жыл бұрын

Like the fact that you started working on a clean ATV with no mud or dirt on the axel as it makes it so much clear for us amateurs to observe and learn. One Q...what did you use to remove and clean old grease?

@fredanderson1753 8 жыл бұрын

Excellent attention to the details...Helped alot, Thanks

@michaellight3060 6 жыл бұрын

D Ray, i just pull the bottom shock bolt and the bottom knuckle nut then the axel comes right out. Alot faster

@2499Michael 4 жыл бұрын

Thanks mate! (from Australia).

@franksenter9318 9 жыл бұрын

Honda Rancher, 2010 front axle. Can't remove or slip the beirngs race off. Pounded it with a 2x4 with no luck.

@trikerjon 3 жыл бұрын

Great instructions , thanks 👍

@nightrod2237 5 ай бұрын

Thank you

@cordchoppers8202 4 жыл бұрын

Your Videos are always Super Helpful Keep up the Good Work 👍 Cheers 🍻

@ezechielroy859 3 жыл бұрын

this video is very great ,thanks man.

@Cj-ph2ky 8 жыл бұрын

Very nice instruction. Thanks!

@kbro7484 7 жыл бұрын

Why worry about if you get grease on the inside of the boot. The grease will eventually work it's way off where you placed it and onto the boot?

@nathansanders9559 8 жыл бұрын

great video. very good on the camera.

@MrTexaspete30 4 жыл бұрын

Thank you for the video good sir

@gordonwoodson6921 5 жыл бұрын

Awesome video!

@DOMINION4x4 6 жыл бұрын

Thanks for such detailed video

@zx8401ztv 11 жыл бұрын

Looks like a brand new one now :-) Nicely done mate :-))

@brockoleary8377 10 жыл бұрын

Great Video thanks D -Ray!

@point223 8 жыл бұрын

Awesome Video D-ray. I have a torn boot and the cv started clicking. How easily are the CVs ruined? is it something you can clean, regrease and reboot and be ok or is the cv ruined pretty quickly if its not taken care of immediately? Great Video by the way. You do a great job explaining all the little things to look for when doing this job. Thanks

@sugargoldy 6 жыл бұрын

Excellent video sir thank you job well done

@riv1950 7 жыл бұрын

Very good video, thanks.

@Gunnypauly73 4 жыл бұрын

THanks Man , Great video

@nathanmorris2029 4 жыл бұрын

Good video man

@Smngorin 7 жыл бұрын

Thank you! I'm definitely subscribing and liking this video.

@adamj1168 9 жыл бұрын

Fantastic videos, man!

@hannahkiesling6907 8 жыл бұрын

This was very helpful Thanks

@hrivera929 8 жыл бұрын

Great video !!

@royfoley2591 Жыл бұрын

Ray, How is it your inter joint race and bearings stayed together, my ball bearings fell out all over the table when I removed them from the inter joint cup.. what did I do wrong ?

@jeanmimeault6936 7 жыл бұрын

Excellent!

@alimashaaleh7980 5 жыл бұрын

thank you so much

@judyhile8551 3 жыл бұрын

are there after market cv boots for Kubota RTV x 1120D If yes, where--thanks for excellent video

@rubendario7441 10 жыл бұрын

super bueno el video asi es que nesesitamos un profesor

@smithstonean 8 жыл бұрын

Nice job !Thank you !!!!

@olivierdelfosse2789 8 жыл бұрын

thanks

@dianeconnell5111 10 жыл бұрын

It appears our bearings may be toast. They are falling out of the chase, or is this normal?

@gooddrugsfarm9105 6 жыл бұрын

Dude you rock! Thanks!

@thoorbloodragnar 10 жыл бұрын

exelent .....very didactic thanks

@edwardguinn332 8 жыл бұрын

thanks for putting out the video ... ! question got a catvo 6 inch lift eagle turner axles cv boots getting to hot destroying the boot is there better grease ? or can I simply put in more grease ? any ideas ? again thanks for the video

@MrDanandRhonda 9 жыл бұрын

thank you

@mountianman96 9 жыл бұрын

great vid thanks

@cardinaldom574 5 жыл бұрын

Please, can worn-out or bad inner cv joint cause ABS light on? I asked because immediately I changed the cv axle joint, I began to hear like cracking nose. Please, what could be the problem?

@fieldsofomagh 8 жыл бұрын

The longer ye live the more ye learn.

@anm0604a 4 жыл бұрын

the best

@jaredsingleton9611 10 жыл бұрын

How do I get the cv axle out of the rear plunging joint on a 2003 Polaris Sportsman 700 Twin? There's no retaining ring, and it doesn't seem to rock far enough to release the balls.

@stricklandxmr190 3 жыл бұрын

Can someone tell me if it matters how the c-clips are facing

@MrIFixEverything 10 жыл бұрын

Great videos. What do you use to clean the grease from the old boot?

@trapshopproductions1804 10 жыл бұрын

Brake parts cleaner and rags in a box works well

@Sparkynutz81 10 жыл бұрын

Didn't look like you got clamps very tight. Know wonder they spin if grease gets on them

@armedfarm3429 Жыл бұрын

Thats right. I noticed it also, need to throw them into the garbage for one thing & get the notch clamps. I would & have used 75lb zip-ties many times, much better than these pull through & fold overs. He at least should have pulled them tight with a vice-grip then fold.