Pt2: How to airbrush true fire with water based paints

  Рет қаралды 134,155

Svee Wheeler

Svee Wheeler

13 жыл бұрын

Part 2 of 2 on how to airbrush true fire using water based paints. All the true fire tutorial videos ive seen have used solvent candies so i thought i would tackle it from the water-based perspective.
Im no true fire expert but these two videos will teach you one method for airbrushed fire which you can then go and create your own flames using your artistic ability.

Пікірлер: 131
@cburns1219
@cburns1219 12 жыл бұрын
Well done!!!! You were absolutely right when you said that people tend to over use stencils. Yours has a more natural flow and looks great!!!
@waltwhite1646
@waltwhite1646 2 ай бұрын
Great video ! ... nice to see this in a calm/relaxed environment and that the fire is built in a structured manner !
@cnightingale1
@cnightingale1 10 жыл бұрын
Just started airbrushing and ran across your video. And fantastic great tips! I look forward to seeing more!
@SuperChronic79
@SuperChronic79 11 жыл бұрын
Most informative true fire for water based paints I have seen. Good job, I will be following your tips.
@jremil58
@jremil58 7 жыл бұрын
Thanks for taking the time to actually explain what you are doing. As you said, there are plenty of true fire videos out there, but yours is the first one I found with clear steps/explanations in between the time lapse bits. So thanks again! I am subscribing now!
@bernielarkin5464
@bernielarkin5464 6 жыл бұрын
JF Remillard :
@jamesprine8565
@jamesprine8565 10 жыл бұрын
Nice video with great demonstrations on how to do the flame they look great
@MrJohnworks24
@MrJohnworks24 8 жыл бұрын
I just got into this airbrushing hobby.This will be my first flame art.thanks for the vid on water based paint.
@billmartin5376
@billmartin5376 11 жыл бұрын
Svee, just wanted to say thanks for taking the time to share your work! You have been an awesome resource for me improving in skill! Thanks
@brianwalker4547
@brianwalker4547 6 жыл бұрын
Thanks for making this video I been trying to do true fire for a while now having poor success but with your video you explain the steps very well thank you again for making this video it sure helped alot.
@solorbob
@solorbob 10 жыл бұрын
Thanks for the videos. I have been watching loads of videos and trying to do real fire. My results have been poor at best, but improving. I can see lots of improvement in my flames after watching your videos. Thanks. I will post a video follow up after a bit more practice.
@James-fe7wd
@James-fe7wd 9 жыл бұрын
I really like these videos, you're very informative. Nice work, and thanks!
@TheOllyj
@TheOllyj 12 жыл бұрын
Brilliant work! Thanks for posting it
@TylerVanner
@TylerVanner 11 жыл бұрын
What a lovely guy Svee seems. Not afraid to share his knowledge with us. Even though w all know tht Sve has a special Git that makes it look easier than it is. but I respect that a lot. The Bubbles effect video had me mouth a gape for a while day. Truly an awesome guy. Hopefully one day I can Commission Svee to do something for me. If he doesn''t have a 25 year waiting list ? Best wishes Svee
@keyrazy
@keyrazy 12 жыл бұрын
Like for the daughter hug and the awesome brush work!
@kodaknix
@kodaknix 13 жыл бұрын
great job svee love your work.
@ThatScaryMonster
@ThatScaryMonster 11 жыл бұрын
Thanks for the vids Svee, watched a bunch of them over the last few weeks and they have really helped me get started, will be trying the flame technique very soon.,,
@Blahde
@Blahde 12 жыл бұрын
That's pretty awesome mate. Good job!!!!
@brianthorpe4345
@brianthorpe4345 10 жыл бұрын
This is my first successful attempt at true fire. I love how you do your best to give detail into what you are doing so the rest of us can follow along. For that I thank you. I don't think mine turned out too bad. My kids think it looks way better than my previous seaweed attempts. It would not let me load a picture in this message or I would be glad to share.
@badgrimlyfiendishsmith6649
@badgrimlyfiendishsmith6649 11 жыл бұрын
Hi, I have been watching you videos for some time I am retired so I have some time to airbrush I'm self taught and a lot of your tips and recommendations helped a lot. So keep up the good work and again many thanks..
@miller6269
@miller6269 4 жыл бұрын
I like how you take your time and you explain very well
@zotilraxx
@zotilraxx 13 жыл бұрын
This is great! Loads of information and usable facts. I am just a newbie but i am finding airbrushing very exhilirating. When i get into the realistic fire practices i will surely send you some pictures.
@daviej95
@daviej95 11 жыл бұрын
Hi Svee, Just watched you True Fire vid using water based paints, real helpful. I'm very much the beginner, do loads of drawin but just startin to experiment with airbrush. Great stuff, thank you.
@60roadstar
@60roadstar 12 жыл бұрын
Nice relaxing tutorial and very useful to a beginner like me. Thanks
@Normnonuts
@Normnonuts 10 жыл бұрын
Learning a lot from your vids Svee thanks for taking the time to do these. Although I'm late to the party (57) & just starting out using water based paints & air brushing I'm going to be looking out for more of your great air brushing tutorials :-D.. All the best Norms..
@buddybonus10
@buddybonus10 12 жыл бұрын
Excellent, I'm just a beginner but your work is trully amazing and your great to watch too and not scared to have a laugh, well done
@KarrsmyBoa
@KarrsmyBoa 12 жыл бұрын
great video watched pt1&2 just waiting for my airbrush's and compressor to come going to use mine for resin models but i might just give this a go to get me used to an airbrush
@Ballbag6399
@Ballbag6399 12 жыл бұрын
You make that look so easy!! I can't do it to save my life
@wrekt-em
@wrekt-em 7 жыл бұрын
hey mate love your work.been frusterating myself about 2 months now. was almost ready to throw in the towel. only having a hp revalution .5mm makes it hard to do detail. anyway, today i finally managed a layer that i think i can work with. that said, providing all goes well and i dont end up starting over again i will be happy to send you a pic of the finished product. wish me luck and lots of patience. im straying away from stencil use altogether. just looks better in my humble opinion. in any event, thanks for the tut, it is greatly apreciated
@MrWentco
@MrWentco 11 жыл бұрын
I Really Like What Your Doing,Looks Great!!
@peter06121
@peter06121 13 жыл бұрын
your videos are so entertaining to watch :) you've got talent! good job!
@bikerdude1959feb
@bikerdude1959feb 11 жыл бұрын
Cool work, thanks dude.
@cajunsawmill
@cajunsawmill 10 жыл бұрын
Thank you, Brother.. Great video, very helpful and loved the music too..
@artrobinson4102
@artrobinson4102 12 жыл бұрын
I have watched this 50 times.... going to get it... eventually. THANKS Svee! Will be looking for more good advice.
@dirkschwiesow5279
@dirkschwiesow5279 8 жыл бұрын
Amazing work, i´m so interested in that, doing airbrush, so your vids do inspire me a lot. thx for that. will get the equipment and start my new hobby :D. Keep your tutorials going on mate ;) greets
@iscareuiknowit
@iscareuiknowit 13 жыл бұрын
@svee I always wear a respirator with none water based paints. Thanks for all your help Svee, keep up the awesome painting!!!
@hefty88
@hefty88 13 жыл бұрын
it looks good to me man i give this video a 10 of 10 on doing sometime new with wicked color your are the man
@Titan-XaGLeZ
@Titan-XaGLeZ 12 жыл бұрын
i think i need to watch this a couple more times but i learned a lot from it thank
@More-Space-In-Ear
@More-Space-In-Ear 5 жыл бұрын
Very helpful cheers. 👍🏼😊
@rookie2006hhrc
@rookie2006hhrc 12 жыл бұрын
Looks to be very helpful! Ty I am an established artist... or so they tell me anyways, who is just starting the airbrush medium. Thanks for making the vid. Nice job too by the way!
@randyanderson6110
@randyanderson6110 4 жыл бұрын
Fire is hotter on the top. Hot air rises, because it's less dense than the air that's replacing it. I subscribed.
@Nukpana69
@Nukpana69 10 жыл бұрын
awesome tutorial... great music... new subscriber
@martinsprayart
@martinsprayart 11 жыл бұрын
very cool bro..really like your way..for to do this..
@McH3NKIE
@McH3NKIE 9 жыл бұрын
tnxs 4 making this. all the explanation helps a lot your a true teacher probz
@ICS197879
@ICS197879 12 жыл бұрын
nice man.greetings from greece.
@johncareless8551
@johncareless8551 9 жыл бұрын
I like your videos Svee,, plenty of detailed explanations and well thought out. I followed your water droplets clip and was really impressed with how it turned out. Keep them coming mate. Can you give me your ideas on purchasing a good airbrush to do detailed work with. At the moment I have an Olympus, which was really a cheap buy, but got me going ..!!
@reaperkingg9177
@reaperkingg9177 11 жыл бұрын
this really helps man. i just cant see lay out good flames but this helped thanks Svee
@lilid6143
@lilid6143 9 жыл бұрын
Thanks for your video, I'll try airbrushing flames, true fire,l don't all understand what you said,because I'm french, but I see your step by step.Thanks a lot
@Mougs05
@Mougs05 11 жыл бұрын
Nice !
@HeavenLyButEvil
@HeavenLyButEvil 9 жыл бұрын
awesome work. what type of paper or poster do you recommend to paint on and to make your stencils?
@sveeart
@sveeart 12 жыл бұрын
@hockeyfreak043 Water-based is a good place to start mate yes. You can blow yourself up with solvent paints lol and you have to have air extraction and all sorts because of the fumes. Water-based can be sprayed anywhere pretty much. The paints i use are "Auto Air" and "Wicked" by Createx. I also use E'Tac, Com-Art, Trident, the list goes on. In a nut shell though just any water-based airbrush paint will do ;)
@kengo671
@kengo671 13 жыл бұрын
Aloha you have some great looking work
@4greenfieldseire654
@4greenfieldseire654 6 жыл бұрын
fantastic vid,,just what i needed to get a grip on the basics of fire,love the mauve [ purple red ] top left. Svee, can i use anything else to thin the water based paints instead of paying for it,,i mean can i not use a mix of house hold items ? thanks for the video
@mrscheekybynature
@mrscheekybynature 12 жыл бұрын
awesome. thank you so much for such a detailed 'how to'. If I can do this half as good as you I would be super happy :0)
@AllCityAnarchy
@AllCityAnarchy 12 жыл бұрын
Watched, Liked & Subscribed... Awesome Thanx Mate
@j4ym4t16
@j4ym4t16 12 жыл бұрын
ive always found that to help with the muddy effect by going over the black at the end but very lightly so not to muddy the colors
@sveeart
@sveeart 13 жыл бұрын
@iscareuiknowit Depends. On this i used a rattle can of 1K acrylic clear. On guitars i use 1k, 2k, nitrocellulose, what ever the customer wants really. Most of the time its the Lechler 2K stuff though.
@iscareuiknowit
@iscareuiknowit 13 жыл бұрын
@svee Sorry, other than rattle cans and water based airbrushing, I have no knowledge of paints. Thanks, do you have any suggestion on specific rattle can clears for guitars?
@renenic4646
@renenic4646 7 жыл бұрын
real nice
@robertrogers5806
@robertrogers5806 10 жыл бұрын
very helpfull video Smee ,would the auto air candies work better than over reduced wicked?
@RcNerd
@RcNerd 11 жыл бұрын
If I'm going to paint flames on lexan bodyshells does that mean bright colour first?
@dadalovezent2554
@dadalovezent2554 10 жыл бұрын
which is better painting or air brushing flames
@gfsdkj
@gfsdkj 12 жыл бұрын
for your 100th video... you should make a painting everything you've taught us
@Mr3Dvisuals
@Mr3Dvisuals 11 жыл бұрын
Nice video tks for demonstrating. What kind of clearcoat did you use? Tks
@skippy101p
@skippy101p 11 жыл бұрын
watch alot of vidios but think this one helped me the best . or you using 1-4 ration on all wicked paint for fire.
@pierrejeanes
@pierrejeanes 11 жыл бұрын
Hi thanks for the video, it's very helpfull, I have one question: I want to do it on a white background and the fire with blue tones, do you think it is possible? and how.
@leebart9158
@leebart9158 11 жыл бұрын
hi svee fantastic vids. im new to airbrushing and have just got some wicked detail paints to try ,i was just wondering what clearcoat you use please?
@jaynye14
@jaynye14 11 жыл бұрын
Hi Steve I use acrylic paints and just wondered how u would refuse that and keep up the great work mate I'm going to upload a true flame vid soon hope u like it
@TJMonster51
@TJMonster51 13 жыл бұрын
@svee Thanks. He is outstanding!!!!
@maurycus
@maurycus 9 жыл бұрын
Super . Ja zaczynam się bawić aerografem ,zobaczymy co z tego wyjdzie . Pozdrawiam
@boostindub
@boostindub 11 жыл бұрын
thank you!!!
@supmod3938
@supmod3938 11 жыл бұрын
Hello mate i was just wondering what lacquer or clearcoat would you use for water based paints?
@1legionary
@1legionary 12 жыл бұрын
great video. was wondering 2 things, 1:if I were to use water as a thinner could I theoretically use any paint i want? 2:what kind of compressor are you using? thanks.
@bricolagedellavita7863
@bricolagedellavita7863 8 жыл бұрын
hello sorry, I just wanted to know who uses painting ?? because I would buy the airbrush, but they sell it to paint tattoos etc etc. I would like to enter the painting like that in your videos, but that painting is? Hello
@geioOOo
@geioOOo 12 жыл бұрын
Muito bom! Estou aqui no Brasil vendo seu video!
@trooper6967
@trooper6967 12 жыл бұрын
@trooper6967 that should have been when you use wicked colours do you use cleaning fluid or water between colours and cleaning
@bigbangs808
@bigbangs808 11 жыл бұрын
Is it ok to use a single plane airbrush gun for water based flames ?
@henkoyb
@henkoyb 11 жыл бұрын
i have this badger 150 airbrush and i use 30 lbs on my compressor should i able to do this like that? and any idea if i can get those colours in the netherlands? Thanks
@BADBRYZ
@BADBRYZ 11 жыл бұрын
do you use 4 to one on everything... or just the white?
@iscareuiknowit
@iscareuiknowit 13 жыл бұрын
What do you use for clear coat?
@andymandyandsheba4571
@andymandyandsheba4571 10 жыл бұрын
could you use french curves instead of stencils ??
@Sittin.
@Sittin. 11 жыл бұрын
Very good video of how to. And darn good music. Is that you as well?
@MrNugs67
@MrNugs67 10 жыл бұрын
Thanks for the video's Svee... Became a subscriber to your channel as well...
@bonnierehder4206
@bonnierehder4206 11 жыл бұрын
Do you use any tips? or what are the tips used for? and the needles ?
@marknewsome9277
@marknewsome9277 12 жыл бұрын
nice video. I started doing my flames using water based transparents, good when you get to grips with layering and bleeding. i moved to specialist paints Inspire range and Wow, what a differance!! so deep and captivating..One question you might be able to answer, data sheet says use "D-thinner", what is "D-thinner"?? I use a normal 2K thinner and it works for me but if "D-thinner" is special or better i will change, or is this just a cunning marketing ploy so you buy from them?? thanks for vid.
@trooper6967
@trooper6967 12 жыл бұрын
hi svee you have probably been asked this but when using the wicked colours do you use an airbrush cleaning fluid or just water? great vidz by the way you have inspired me to get on ebay and spend some money on a few bits and bobs and see where i go with it. and can i say your easy to watch and make me laugh out loud making the mrs and kids think im a loon sat in the corner earphones on laughing to myself anyway well done and keep up the ace vids take it easy Buck
@leonagaznog890
@leonagaznog890 3 жыл бұрын
What paint did you used?
@GrawlysLair
@GrawlysLair 10 жыл бұрын
This is the effect I want to achieve on some 28mm scale miniature figures.... A bit of practice with mini flames and wish me luck... If I achieve it I'll share it
@berettasickmade9733
@berettasickmade9733 7 жыл бұрын
can you show a flame tutorial on white background. your commentary is very helpful for me
@3et53rtg78
@3et53rtg78 11 жыл бұрын
great
@TheParafins
@TheParafins 11 жыл бұрын
I have been a professional painter for over 20 years air brush as well. what are your tips for keeping the air brushes clean, I clean them after every color spray meticulously. I use Iwata and parts are quite expensive;
@joedavidson9159
@joedavidson9159 10 жыл бұрын
Great information here. New to airbrushing. Where can the Dibond material be purchased in the States?
@sveeart
@sveeart 13 жыл бұрын
@playNsleep Always possible mate. Im working with Rob on the ML2's with some custom jobs so i guess the same thing will stand with the ML3's. I'll need to check with him first though ;)
@SOMMARIO66
@SOMMARIO66 13 жыл бұрын
Yesssss :) I use for make flames my hands and finger like a mask, that why to the end i have made also a "body paint" hahahaha, don't warry it's water paint and you need only to wash your hand.... have you try this? Great Work! Ciao from Italy Mario
@DannyCroughs
@DannyCroughs 13 жыл бұрын
nice going mate, greetz Danny C.
@MrNugs67
@MrNugs67 10 жыл бұрын
Oh, what kind of material did you paint these flames on?
@isocult
@isocult 12 жыл бұрын
Just a thought: if you spray black (same type of paint used for the background) when done with spraying the colors, around the edges - applied both freehand and using stencils - would that perhaps make the flames more realistic? Cheers mate, great vid.
@Tom-mk7iq
@Tom-mk7iq 8 жыл бұрын
Nice , The flame is hottest at the top though bro. 👌
@dalemasyk1583
@dalemasyk1583 5 жыл бұрын
nice ,simple flames cool tks whatabout BLUE FLAMES that my favor flame colour
@sveeart
@sveeart 13 жыл бұрын
@jclass13 Mostly Lechler 2K clear but i have been known to use Upol 1K acrylic, Nitrocellulose and cheap rattle can stuff too ;)
@hockeyfreak043
@hockeyfreak043 12 жыл бұрын
whats the name of the paint .??? is water based paint good thing to start with ...iam a beginner
Pt1: How to airbrush true fire with water based paints
17:53
Svee Wheeler
Рет қаралды 156 М.
Airbrush FX - How to paint bubbles and water drops
10:33
Svee Wheeler
Рет қаралды 1,5 МЛН
Получилось у Миланы?😂
00:13
ХАБИБ
Рет қаралды 5 МЛН
A teacher captured the cutest moment at the nursery #shorts
00:33
Fabiosa Stories
Рет қаралды 55 МЛН
小宇宙竟然尿裤子!#小丑#家庭#搞笑
00:26
家庭搞笑日记
Рет қаралды 15 МЛН
I'm Excited To see If Kelly Can Meet This Challenge!
00:16
Mini Katana
Рет қаралды 29 МЛН
Airbrushing True Fire with Water Based Paints
10:26
Brad Angove
Рет қаралды 105 М.
Airbrush fine detail with waterbased paint Pt1 - Auto Air
14:20
Svee Wheeler
Рет қаралды 126 М.
Airbrush Trueflames Tutorial Speedpainting Anleitung  WC-Sitz Design SK-Brush
8:54
SK-Brush Airbrush & Pinstriping Linierung
Рет қаралды 3,1 МЛН
How do you airbrush real fire?
37:38
Duncan Custom Airbrush
Рет қаралды 23 М.
Chrome Emblems
13:33
Ed Hubbs
Рет қаралды 497 М.
5,760 HOURS OF WORK!? - The Process of Making Japanese Traditional Tatami.
30:03
Craftsmanship Process - SUIGENKYO
Рет қаралды 402 М.
Smoke Flames and Skulls Step by Step.
12:44
Airbrush Asylum
Рет қаралды 264 М.
Airbrushing A Skull
9:30
Eden's Edge Studio
Рет қаралды 507 М.
Damascus Steel From Milling Chips!
15:47
Alec Steele
Рет қаралды 1,3 МЛН
Bizda +50☀️ Subscribe❤️
0:14
Hayot Sinovlari
Рет қаралды 4,9 МЛН
Quem vai assustar mais meninos ou meninas?!😱 #shorts #challenge
0:10
Gabrielmiranda_ofc
Рет қаралды 115 МЛН
Fast and Furious: New Zealand 🚗
0:29
How Ridiculous
Рет қаралды 45 МЛН