PTE 6262 Turbo Rebuild

No video

PTE 6262 Turbo Rebuild

Рет қаралды 20,655

Күн бұрын

Precision 6262 Turbo Rebuild Check List
Here are things to check for when Rebuilding your precision turbo so you know you assemble it correctly
Buy precision 6262 Turbine shaft: turbolabofameri...
Buy 6262 Turbo rebuild kit: turbolabofameri...
Buy 6266 6466 6766 turbine shaft: turbolabofameri...
For below products contact us at turbolabamerica@gmail.com
Buy 6262 6266 compressor wheel
Buy staggered journal bearing for ball bearing gt37r turbine to fit in journal bearing turbo.
Gt37r ball bearing rebuild kit : 421b62.myshopi...
Gt37r turbine wheel shaft : 421b62.myshopi...
Gt37r T67 billet wheel (not the same as all 6765 or 6766) turbolabofameri...
Gen2 6262 6266 6466 6766 seal kit: 421b62.myshopi...
6262 gen 1 billet wheel: 421b62.myshopi...
6262 gen 2 billet wheel: 421b62.myshopi...
6466 billet compressor wheel: 421b62.myshopi...
6766 precision turbine 6.35mm shaft bore (works for ball bearing and journal bearing)
421b62.myshopi...
6262 turbine (works for ball bearing and journal bearing):
421b62.myshopi...
5858 5031 6031 6266 6262 6766 standard bore journal bearing rebuild kit:
421b62.myshopi...
Gt3071r gt3076r 9 blade turbine upgrade: 421b62.myshopi...
Gt3071r gt3076r 10 blade replacement turbine: 421b62.myshopi...
Gt2860r gtx2860r turbine: 421b62.myshopi...
Gt2871r turbine: zh11v5v20gygh7...
GTX35r billet wheel compressor housing and plate:
421b62.myshopi...
Gt35r GTX35r ball bearing brass retainer upgrade rebuild kit:
421b62.myshopi...
Gt2554r through gt3076r ball bearing brass retainer upgrade rebuild kit:
421b62.myshopi...

Пікірлер: 40

@Tsxmichael 3 жыл бұрын

Best costumer service ever!🔥🔥🙏🏽🙏🏽🙏🏽 thanks for everything

@jacupsladder 7 жыл бұрын

I appreciate your videos. Learning a ton of little details.

@HC-ov2hh 4 жыл бұрын

You make it look easy like Presto!!!

@1188dale 6 жыл бұрын

Thank you for your videos and your time this helps out a lot of people👍🏿

@boosted2.4_sky 7 жыл бұрын

Nice work... Very well explained.. 👍

@tensecondbuickgn Жыл бұрын

I spent an entire week powder coating and rebuilding a TE-60 for my GN. Guess what happens when you forget to put locktite on the compressor nut?

@mikesimmons3876 5 жыл бұрын

Ian, ordered the kit from you Friday and it’s here Monday at lunch. Thanks man

@mikesimmons3876 5 жыл бұрын

Waiting on the correct thrust spacer :(

@mikesimmons3876 5 жыл бұрын

Didn’t send me new compressor cover bolts that fit either. Sent me slightly larger 8.8 grade bolts and thank god i didn’t force them in otherwise I would have stripped the aluminum. I had to reuse by old bolts. His response was, mine are hard to get. I asked this kid what to order BEFORE I ordered anything. WTf did you send me garret cover bolts for SMH

@mikesimmons3876 5 жыл бұрын

His exact response: There are different versions of the turbos, yours has 5/16 thread bolts if they don’t fit. Precision had 2 variations of the bolts. On the t4 turbine housing they used 5/16 x 18, on the t3 they used 8mm x1.25. The compressor housing uses 5/16 short bolts, they aren’t easy to get. I include the 8 x 1.25 for the garrett turbo cover. If you want the 2 piece brackets I have those, you can use the 3 or the 2.

@mikesimmons3876 5 жыл бұрын

Also never even got an apology for all this BS.

@vincentjarvey635 7 жыл бұрын

Love your videos. Thanks.

@BoostedMx Жыл бұрын

Precision quoted me at 707.49 for a rebuild

@CharlesTun4 7 жыл бұрын

Very informative! I've recently found your channel and watched quite a few of your clips, they're all very interesting covering a wide range of turbos and applications. Do you have any clips of rebuilding Blouch turbos ? reason for my asking is I have a Blouch Domintor 2.5 BB billet aka Polka Pickle ..that failed after 4500 miles, All sorted now but I was just wondering what your experience and opinion you had of that turbo. thanks! keep the clips coming :D

@turbolabamerica 7 жыл бұрын

+CharlesTun4 they are just like the ballbearing gt35r on the inside I need to make a hd video of the gt35r assembly, I have the t35r disassembly

@CharlesTun4 7 жыл бұрын

Turbo Lab America that would be really good to see. my turbo failed with the bearings cages melting due to high exhaust temps ..possibly due to higher exhaust temps from ceramic coating the exhaust housing? I'm from the UK so no way I could have used your services. however the turbo has now been upgraded with metal bearing cages and thick bearing heatsheild . .hopefully that's a step in the right direction

@Kyrazlan 3 ай бұрын

what about balance after the rebuild?

@AndyGT86 6 жыл бұрын

I have a PTE6265 journal bearing turbo with exess play. Can i use the universal t04e rebuild kit? Very good video! Thanks

@turbolabamerica 6 жыл бұрын

Watch out for the variation shown here. It’s rare but more common on units from the early 2000 year models turbolabofamerica.com/garrett-t3-t4-to4e-to4b-turbo-rebuild-kit/ other wise the kit is a direct fit. I do have the different bearings too if you have the ball bearing shaft

@suttonjohnson3847 2 жыл бұрын

So I assume in this video there are 2 snap rings not shown being installed?

@turbolabamerica 2 жыл бұрын

There are 4 total

@suttonjohnson3847 2 жыл бұрын

@@turbolabamerica do you guys have a number I can contact for support

@seanpyrtle5603 2 жыл бұрын

Hey I’m trying to rebuild a precision 6266. I have one of your rebuild kits. I have the turbo mostly stripped down, c clips are removed from the center section. I can’t get the bearings out. I’ve tried hammering them out with a vise, heating them with a torch.. and everything. What do I do to replace these stupid bearings please?

@turbolabamerica 2 жыл бұрын

I would try to press them out with a socket

@benjamindobson7351 4 жыл бұрын

I followed your video but my shaft will not go back in. What could be the problem? Looks like I am going to have to order a new rear seal ring as well.

@turbolabamerica 4 жыл бұрын

The bearing housing can be damaged to where the rear seal won’t go on, the bearing housing may need to be replaced, the shaft may need to be replaced also. You can check by putting the rear seal on and more it around on the shaft to make sure it doesn’t bibd

@benjamindobson7351 4 жыл бұрын

Thank you very much

@ashevilleislove 3 жыл бұрын

Mine done the same thing, put the thrust spacer on first then the journal bearing and it will slide right in.

@roda1999 5 жыл бұрын

Hi, did sale a kit for rebuil the pte 5557 thanks

@manueliglesias4212 5 жыл бұрын

Hey man i have a 6262 journal bearing im not sure if its a gen 1 or gen 2 but its a .82 on the exhaust side and want it to spool quicker is there any other hosings or modifications i can do to this turbo to make it spool quicker ?

@mikesimmons3876 5 жыл бұрын

You could just add fuel in the tune

@Oscar_HenriquezMIA 7 жыл бұрын

What type of Oil are you using for the parts?

@supreme59raag 5 жыл бұрын

Is this the same process for the precision 5431? Is the kit also the same?

@turbolabamerica 5 жыл бұрын

The kit and process is the same but the wheels are different

@aldolara2815 4 жыл бұрын

How long are the 10mm bolts ?

@beboaguayo4664 7 жыл бұрын

What kit are you. Using

@naldob18c53 5 жыл бұрын

Why don’t you tell people what turbo kit your using? eBay?

@turbolabamerica 5 жыл бұрын

It’s a to4e rebuild kit , kzfaq.info?v=0kJAySfSd-I&redir_token=ztzdqA1yTDuN3ZY7H9-2JZ5UimR8MTU1NTE5MjIzMEAxNTU1MTA1ODMw&q=http%3A%2F%2Fturbolabofamerica.com%2Fgarrett-t3-t4-to4e-to4b-turbo-rebuild-kit%2F&event=video_description