Puddin was broken hearted because you dumped her for Brutus, so she jumped under the tree after being dumped and left on a hillside.

Wade, not saying you could break an anvil with a rubber mallet, but you'd dent it for sure! 😁

Wade, you could bend a crowbar in a sandbox!!

That's a RUD, Rapid Unplanned Disassembly

This video brought to you by Husky and Q Bond...😂😂😂

Kinda rough on the ole girl there Wade. Im sure you’ll have her back up in no time. Ive never seen a bar snap like that. What a scrap yard of parts. Thank gosh for hoarding.

I’ve been amazed at how you throw your saw around and not broken the tank I have a jonsered 2188 I couldn’t reseal the tank put a new one on now I know Q Bond Thanks

Wade is the chainsaw god.

Your gonna keep right on messing with that Sassafras and I am going to have come up there and do a sayonce . It will involve Crocks and Eagle Feathers.May be some mud too. Stevie can beat the drum.

Husqvarna saws do not die.they just wait around for someone to rebuild them. 😂

Great video Wade you brought Puddin back to life there one thing about having your own boneyard of parts like that is u dont have to spend your down time buying new parts i worked in small engine repair shops and 90% of the parts we had came from the boneyard or boxes of spare parts on the shelves we rarely bought new parts inless needed be so good to u ur saw back up and goin again

I am going to get me some of that Q Bond. The stuff I have been using does not burn into the plastic.

Reminds me of when I was in the woods....just got a rebuilt Stihl and put it by a tree off the edge of the road when I went down the hill to help pull main line. Well the crane operator and his cohort in crime needed the saw to cut trees blocking the swing and tie back wire. Well... needless to say stooge #2 did not put the saw back where he found it. Instead he put it underneath the crane between the tracks. And that is a normally safe spot when the crane gets set up. Well they weren't set up yet and they moved the crane and repositioned the tracks and ran over the saw tried to blame it all on me. Well the boss watched me put it in the safe place off the road and told them they could just pay for another rebuilt saw out of their pay checks. That man was a good boss ... Paid extra in cash ....his wife was so sweet...she bought me expensive winter boots as an additional bonus. That was the mid 90's and we we had two late 1960's link belt cranes that came from the pacific northwest. One standard 4 drum crane that they had put a manual pull carriage on and were using as a yarder. And one that had a stiff heel boom and cable log jaws they we're loading out with. The owner could make that loader crane do a lot of cool tricks. Nothing like the thrill of getting a large set up cable jaws cast right behind you as you are working just for shits and gigles.

Wade as an old automotive repair parts clerk in the US Army, the Can-Point provided great source for parts. Cannibalization keeps you "Mission Capable!!!"

RIP Puddin!

Great rebuild there. Nice walk thru on The products to. As My dear old daddy would say, The proofs in the puddin Son. Yes That Q bond was the bomb.

All I usually run is Oregon bars and chains

No! That’ll teach ya to play in Brutus and leave puddin sitting on a lonely stump🤣

4:13 From death comes life. The graveyard is a sacred place.

You can't leave this property fast enough! Wow!

395 husky best Dam saw I ever bought for cutting timber Mr. Wade. Hey when u put a new chain on it do u hit it with a file or do u just start ripping through the tree's? I always run the file through it ones seems to grab alot new!?

See 💩 like that buffs right out looks like new

Poor ole puddin!!! She is gonna need workman's comp for her injury!!! Get that saw a fresh wax job and premium gas for life!!! Great vidja as always Tater!!!!

I think that chunk of aluminum came from the front edge of the bottom, right in front of the handle screws just as it turns up the face under the muffler. Sorry to see ya did that but at least you had spare parts laying around.

I usually don't run my chain that loose but to each their own. Bummer man.

For future reference as long as the crack isn't to big you can use a soldering iron and some scrap plastic to kind of plastic weld it up. Ive done it a few times with good success.

Thanks for the info about Q Bond, I have a gas tank to repair and nothing else seems to work. Work smarter not harder.

Seen something similar happen to my buddy's stihl ms460 all it did was break a anti vibration mount and bind the handle

Great repair, good as new!

Been there buddie nice to have all them old saws around to get ya back in business j got a bunch of old torn down ones c ok me in handy

I got this from small engine engineers. Even though it states to use 87 octane. You won't hear the microscopic pinging called planned obsolescence. Run mid grade or plus all the time because they need over 88 octane...........This is true of lawn mowers, trimmers, outboards, chainsaws, generators, ect ect..............

Never herd of that q bond stuff ima try it on my sons fourwheeler gas cap

Damn I never new that huskys we're that tough.

Puddin was doing pretty good eating that tree stump

You were test driving some nice Huskies a few video back time for a new model

Remember what real mcCoy says about sassafras bad luck always happens

Whew. Close one.

Wow, that bar exploded

Hey that broke off piece , came from below the oil fill,

Greetings from No VT - Looks like you have been watchin IronHorse resurrect great saws!

Wade you aint treatin puddin worth a darn at all---JUSSAYIN MAN

Behind the stump Wade !

Damn man. You need to get the hell of this job tater!

I love my Husky!! Never heard of Q-bond

You killed EVERY puddin you’ve had tater🤦🏻‍♂️I’m just glad you’re ok though bud.

Man that bar must have been made out of some really hardened met at to just snap like that instead of bend! And on the Bright side the top that you put on isn't as sun faded as the rest of the saw, down fall is now you have to polish an wax the rest of the saw to match!

great tip, but when you had the rep out their why not tell him to have husky make them that way

Dang Wade, thought it was bad when I It one of my Husqvarnas with the disk

What is that powder stuff and I'm guessing it's super glue.

Ring ring mr ins man i just went to get my new saw and realized it was in that mess that got stolen could u add that to list.

Hey you got me using this Q Bond stuff... Omg thank you for telling this secret... I ran over my saw with a tractor and busted it all to hell... She don't look pretty but by golly she works again... Thank you Wade

Agreed ole 395 is best saw I've ever had that cousin of mine used to run them every day till he got a cutting machine I cut fire wood with mine she's just a pile of parts he had laying around and I built a saw out of it lol that q bond is awesome I use it to glue broken auto parts back together I actually glued the plastic radiator tank back together with it in one of our yard cars and it's been holding for over a year now sounds like you have luck like mine if it was raining tacos you get hit with a weiner 😂 it will get better soon keep up the good work and have great day

Dang wade that sucks when that happens but it is easy done is those Bars good bars and husqvarana saws is like a timex watch take a licking and keep on ticking thanks for the vidjas be safe bud

Speechless

is that the puddin grave box's of all the many puddin's you ran over dropped tree's on and so on

lucky break one the saw wow! where does one go to find this Q-Bond?

Superglue and baking soda will do the same thing as your Q bond lol but way cheaper ,the military uses it to fix Nicks and scratches on carbon fiber rotor blades , the baking soda hardens the glue instantly and becomes hard as steal ,you can grind it sand it what ever ..

Goes to show ya Husky is a tough saw!! Tried and true by Logger wade!!

Daggone Wade, It's great you take ownership for this mishap. You know you can blame it on Stevie with very little effort. Just say Stevie what were you thinking about? That does it, it's Stevie's fault. Glad I could help, Randall

Tater, you crazy man. It's like you live just like us Mississippi boys. Take a toothpick and make a war ship out of it. You are one hell of a go getter ole boy for sure 💪💪. Just like you say" I wake up to fu#@ing win not to lose" and in our lives that's exactly the mind frame it takes to survive🤛🤛 those vidjas are great man keep them coming

Super Glue and baking soda. Keep in your service truck. It works! And it's cheap

Suffer'n Sassafras! Ya no good galoot!

Hey Tater, Mabe after the job is done U could take the crew on a"Stone Soul Picinic", with bread, yellow honey, Sasafrass, and Moonshine, check it out A.

Send me them 066 parts I need a new project to play with

I'm glad I'm not the only one that's ever mashed a saw that I set somewhere and forgot!!! Makes me feel better! 🤣 Sorry about puddin.

Wade at least this didn't happen on April fools day

Sassafras trees are bad luck, guess you found that out the hard way.

You have got enough parts to build 20 saws or fill up a chainsaw grave yard lol

Poodin looks a bit lumpy. She looks bad. Thanks for the video Mr Wade.

Bunch of comedians.

Puddin 10,000 Tree 1

Hey tater what’s your thoughts bout Carlton chain? We have boxes of ole 288 carcasses!

I just sent an email out to Husky Protective Services...They will be by to investigate more in the morning but with this being the 3rd report of abuse. They may have to remove Puddin and find a foster home! 😕 Sorry Bud...but it is probably best!

Got me a mess of 288s Ive even got 2 boxes for 2100s and the saws that go in em' I bought a West coast logger a few years ago. Sight un seen just gambled and got lucky

Put a logger in a football field with a steel ball, and he will either lose it or break it. 😊

I once ran over a brand new 562xp with a remote control chipper you made out better the I did. Took a while to live that down. Wasn't my fault we started that job on a Friday 13 that's what I'm going with

well at least you use wrap around handles thatys a good sign

How high did it flip it in the air?

I guess this is where that song The day the music died comes in.....But now it called The day the Husky died....Is he...will he Frankenstein it back together...IT’S ALIVE!!!!!!

baking soda and super glue does the same thing and its cheaper . Did you know that during the first gulf war that they used it on the helicopter blades because the sand would chip the edges of the blades and they needed a quick repair. and super glue will harden as soon as baking soda hit it.

You would like those huskys alot more then you do now if you have muffler modes done to them ,its craxy the difference it makes, in the horse power and speed of cutting is unreal!!!! Best saws built in todays market !! That's said I still prefer the old macs and homlites from the late 60s and early 70s !!! The power is bar none compared to today's saws lol

Man Wade. We cant let you run anything this week ! Maby you need 7 days in the Caribbean vacation

Puddin lives again

We just can't have perty thangs

Yha you aint spose to drop trees on them. Your spose to drop trees with them !

Dog gone it wade what the bloody heck you do that for

You should try X-cut chain if you haven’t already.

Where your new one? Lol

Glad you were able to repair it . I was getting sick of looking at old bar anyways . But you could of put a new air cleaner on it buddy i know nag nag lol 👍👍👍👍💪💪💪 thats a husky for yeah

Yes Puddin made it through

Pudding will live hip hip hooray 👍👍👍

Why don't you use organ chain saw bars ?

Might be time for a new saw .

You just had a hankering for a pudding pop and had to go try and put a stick through your puddin...not everything needs a refabrimication lol

Pudding is jello now...

Looks like Puddin needs a trip to the ER !!!!

you can always put new bearings in them

STEVIE HELP !!!!!!!!!! PUDDIN DOWN ( paging doctor Stevie emergency surgery on pudding )

She takes a lickin and keeps on kickin.

oor puddin and holy crap u have enough spare parts for puddin lol