Olive, is telling that the package is safe 🤣👍 Very sade that the gearbox is not working 😒 Keep up the great work AND very nice for their customer Service in deed 👍😉 Cheers 👌😉
@PurpleCollarLife3 жыл бұрын
Thanks 👍
@jimsipes93483 жыл бұрын
Thank you for the very detailed installation video. I just received my Earthway 2600a this morning and assembled it in my office so I could watch your youtube. I'm sorry your gearbox was faulty. Mine wasn't and all worked perfectly. No parts left over is always a good sign. That fact that all the parts were there is even a better sign. Thanks again.
@PurpleCollarLife3 жыл бұрын
Glad it was helpful! I love reading these comments. And we always really like hearing that a video we made was helpful to someone else. Thanks for letting us know. Enjoy that Earthway 2600A. Mine is working great with the new gearbox. It's a nice heavy-duty spreader.
@davida.p.99113 жыл бұрын
Excellent assembly. A prompt customer service department is always appreciated. Hopefully you can get it working soon. I've had more than my share of products with defective parts that I've needed to contact the company about. It can be a pain, but with fast service helps to alleviate the difficulties. Good work!👍
@PurpleCollarLife3 жыл бұрын
Thanks! The new part arrived, was easy to install, and the spreader works great. EarthWay has been spectacular!
@DandQchannel35362 жыл бұрын
Thank you from metro Atlanta! You saved me a ton of time sacrificing your time to show us how to assemble this machine (approx. 20 min because of your video). Like you, I wanted to get ahead and have my new spreader ready for the spring and summer lawn feeding, weed prevention, etc... I hope you got your problem corrected promptly by Earthway. So glad to hear they responded to your email so quickly. I
@PurpleCollarLife2 жыл бұрын
Thank you so much for letting us know! Earthway was great about getting the replacement part to us, and the spreader works perfectly.
@terryh9853 жыл бұрын
Thanks for posting this. I had the same problem with the axel bearings not sliding into the notch. Tried for like 20 minutes and gave up. Thought I was going to have to contact Earth Way for new parts or something. The two plier method worked like a charm. I'm back in business.
@PurpleCollarLife3 жыл бұрын
Glad it helped! And thank you for commenting to let us know. We always are hopeful that something in our videos is useful to others.
@drewrobinson363 жыл бұрын
I did the bearings before sliding the axel and I didn’t have any problems
@samb46783 жыл бұрын
Nice video!
@PurpleCollarLife3 жыл бұрын
Glad you enjoyed it. Thanks, Sam!
@glennbeazley95893 жыл бұрын
Cheers mate.. Made assembling this bad boy pretty easy👍🍻
@PurpleCollarLife3 жыл бұрын
Glad it helped! Thank you for letting us know.
@BhargavP2 жыл бұрын
Thank you for a very detailed assembly video. I did not have the gearbox issue but hopeful that support have sent you the replacement.
@PurpleCollarLife2 жыл бұрын
Glad it helped! They sent a replacement right away and the spreader works perfectly.
@RockhillfarmYT3 жыл бұрын
Sucks that it had a problem but at least they are fixing it for you
@PurpleCollarLife3 жыл бұрын
Earthway has been fantastic to deal with. The new gear box arrived and was simple to install. The spreader works great now! Video about it in action coming out on Saturday.
@LL-tz8lo2 жыл бұрын
Your video is super helpful! I think even their own product specialist (the lady) who made the KZfaq video for. Earthway didn't install the bare steel mechanism correctly with the spacer
@PurpleCollarLife2 жыл бұрын
Glad it was helpful! I appreciate you watching and commenting to let me know.
@zevsafran93833 жыл бұрын
If your drop holes are not opening or closing fully, check that your black spacer is as flush against the bar as possible. At least that is what solved it for me after a lot of frustration. Personally, I found this spreader to be difficult to put together, but it would have been impossible if it wasn't for this video. Thank you Purple Collar Life for sharing your knowledge and I hope that Earthway compensates you for it especially because their directions are so poorly done.
@PurpleCollarLife3 жыл бұрын
Hello Zev- thank you so much for watching and letting us know the video was helpful.
@kendhooge63342 жыл бұрын
I have this spreader and yes it did take about an hour. The instructions are just ok, you may need some prior mechanical knowledge to "figure out" the steps. My instruction pages were printed in the wrong order and I needed to un staple them and piece them together. It is a sturdy and beefy spreader and I like the pneumatic tires too.
@PurpleCollarLife2 жыл бұрын
Thanks for the comment, Ken. Interesting that your instructions were in the wrong order. That certainly could be confusing to someone following the steps directly with little mechanical aptitude. I agree - the Earthway 2600A Plus has been well designed and made from quality components. Mine is still doing great.
@DeeJay202 Жыл бұрын
Appreciate this video sir..was stuck on the wheel and axel assembly...in the manufacturer's assembly video i felt the Camera should of been alot closer like how you presented that step. Thank You
@PurpleCollarLife Жыл бұрын
Great to hear! I’m glad the video was helpful.
@johnbrown66113 жыл бұрын
Many thanks for this very good video (and for the subsequent video showing its use). Particularly helpful was to show the use of pliers to fit the axle bearings. In fact I fitted the coaster side first and before sliding through the axle as the gearbox looks a bit flimsy and I didn't want to break it while trying to push in both bearings...BTW didn't you fit the agitator the wrong way round according to the Earthway assembly instructions?
@PurpleCollarLife3 жыл бұрын
Hi John! Thanks for letting me know that the video was helpful. Several people have commented that the pliers trick was helpful for this and other brands! I don't think I put the agitator the wrong way around, but I'll double check. Thanks for letting me know. Thanks for watching and commenting.
@markwheeler61633 жыл бұрын
I have the same spreader and i have found that the shaft which operates the flow is very flimsy and gets stuck, which in no time at all has fractured the plastic door which shuts off the flow .I have ordered a new part thinking this will solve the problem, which after fitting seems still stiff and flimsy and bends when operating the flow lever, have you or any body else had this problem.
@PurpleCollarLife3 жыл бұрын
I haven't heard of this problem so far, but I did worry about the function of the plastic piece that shuts off the flow. I can tell you that the Agri-Fab spreader I assembled in a more recent video has a much MORE flimsy plastic shut-off "valve". Thanks for watching!
@davidmartin65893 жыл бұрын
Great video. I love your dog. What breed or breeds is she?
@PurpleCollarLife3 жыл бұрын
She loves compliments! :). She’s a Great Dane. We rescued her several years ago. We’re not sure how old she is exactly.
@takenusername2 жыл бұрын
I'm looking for a spreader where both sides are drive, no coast. Do you know if this is possible?
@PurpleCollarLife2 жыл бұрын
I don't know of one. If they were locked together, the wheels would skim one side around a turn (like a solid rear, locked differential axle).
@takenusername2 жыл бұрын
@@PurpleCollarLife I'd prefer an open differential, where EITHER wheel can turn the gears... Not both, and not always the same one.