In this episode, I show you how I put a lift on the rear of my Poulan. It was so simple. I also welded the steering, took off the old exhaust pipe, and put tractor tires back on it... thanks for watching.
Пікірлер: 135
@Baltimoreed Жыл бұрын
My lift will be on a Troybilt Pony so I’ll have to lift the entire rear as its all one stamped piece. I might go up an inch on the footrests supports and 2 inches on the seat bolts. Might have to do spacers under the seat springs too. Enjoying your builds, rebuilds and rerebuilds.
@chud327 Жыл бұрын
Thanks so much and thanks for watching. Good luck with your ride
@roberthachtel8354 жыл бұрын
I'm gonna never leave my shop! Your ideas are ALWAYS the best! Thanks again.
@chud3274 жыл бұрын
I love hearing that and thanks for watching.
@exoduswilcox20945 жыл бұрын
You should make a mower that is lowered and fast for a race mower and that would bring some attention can't wait for stacks on the poulan ur lawn tractors are getting better keep it up
@chud3275 жыл бұрын
I hope to someday have a lowered race mower... BTW, I just bought a pair of chrome exhaust pipes off of a motorcycle. One is going to become a stack on the Poulan and it looks so good. I will try to get it done soon. Thanks for watching.
@krakenking15975 жыл бұрын
Cool to see the body lift, thanks for being consistent, its keeping me motivated.
@chud3275 жыл бұрын
Thanks and stay motivated. Thanks for watching.
@charliekirsch80515 жыл бұрын
If you want bigger tires in the back, you could try to get ahold of a dead jd L120, they have 10 inch wheels on the back, they would slide right onto your axles
@chud3275 жыл бұрын
That a good tip, I would love to get some ten's or twelve's on it. thanks for watching.
@Errorfp5 жыл бұрын
Higher in the back
@chud3275 жыл бұрын
Gotcha!
@dogsandwich77 Жыл бұрын
I stripe roads for a living, and that square tube with the holes is what we use at work to put up road signs. Somewhere on that piece is might have the word "Telespar" stamped into it. Either way, its rad stuff cause every hole is an inch apart, comes in 1 3/4", or 2" and has an anchor and a sleeve that the tube slides into, so we build all kinds of extra curricular projects with pieces of it. We made stencil racks, a frame for a giant carport, my boss used it to make a pen for some cows hahah Some old road signs and telespar, got yer self everything from a go cart frame to a house.
@chud327 Жыл бұрын
Good stuff and thanks for watching.
@PaulieDetmurds5 жыл бұрын
Not so much whats in the video, ...it's the words you use in this, as well as all of your videos I appreciate. Thanks!
@chud3275 жыл бұрын
I like the words you use in your comments too. Thanks so much for watching.
@kadendaugherty3392 жыл бұрын
Thanks for the tips
@tycorriveau84045 жыл бұрын
Thanks for taking my suggestion!!
@chud3275 жыл бұрын
You got it and thanks for suggesting it. Thanks for watching.
@HillbillyOffroading5 жыл бұрын
Looks good with those 22s.
@chud3275 жыл бұрын
I 100% agree... thanks for watching.
@clintswindle24605 жыл бұрын
Keep up the good work brother
@chud3275 жыл бұрын
Thank you so much and I sure plan to. Thanks so much for watching.
@wyattklingensmith88625 жыл бұрын
Thanks for making the videos! I enjoy watching them and working on my mower but i need an engine and the rain to stop
@chud3275 жыл бұрын
Been there and felt the same way... Hope fully you will find one and the weather will cooperate. thanks so much for the nice comment and for watching.
@jacobdoesstupidstuff93584 жыл бұрын
Get a Kohler commander 20
@charlienorton23375 жыл бұрын
You would be some awesome teacher. I wish I was in your class lol
@chud3275 жыл бұрын
That would be cool! I wish there was a mud mower class... Thanks and thanks for watching.
@bobwayne9115 жыл бұрын
Lololololololololol - love watching your videos dude - RWF
@chud3275 жыл бұрын
Thanks and keep watching!
@bucketmouthinc29374 жыл бұрын
That mower should be called “One eyed Willy”.
@chud3274 жыл бұрын
Funny and thanks for watching.
@atvabuse57384 жыл бұрын
Would have been cool for you to have put the 4 dirt devils on the back and the 4 18 inch tractor tires up front. It would make it more level and really cool. I know I’m a year late but that’s just what I was thinking.
@scotteakins72035 жыл бұрын
like your channel. i own a Poulan Pro 300. hydrostatic. ive been wanting to raise the entire tractor, but i still want to mow with it. my ground is very sandy and river bottom. the sand wears my blades out fast! thought larger tires. but not sure.
@chud3275 жыл бұрын
Yeah, lifting it may make your grass taller. Sand will eat right through the blades for sure. Thanks for watching.
@Alex-rc5rq5 жыл бұрын
I think it would look cool as black
@chud3275 жыл бұрын
Me too and thanks for watching.
@mickcrazy4002 жыл бұрын
Hi! I build a mud and I am using a 6 inch cast iron pulley on front. When I change gears it hard. And even when clutch is fully press the tractor want to move. Belt tension is perfect. Do you ever had this problem? I am thinking about machining the pulley...
@chud3272 жыл бұрын
never had that issue, good luck and thanks for watching.
@dodgeme1986truck5 жыл бұрын
Dual valves stems is a good mod especially when installing duals or tire weights however the stems should've been clocked 180 degrees apart so it keeps your tires in static balance
@chud3275 жыл бұрын
Good point, I didn't even think of that. I will do it one the next. Thanks for watching.
@sheilagovenor61073 жыл бұрын
I love the series also you should level the body with the lift
@chud3273 жыл бұрын
So glad to hear it. I have some big butt rear tires that I am getting ready to put on to help level it out. Thanks so much for watching.
@cameronwallen262 жыл бұрын
What kind of tires you got on that John Deere
@blakejacobs9014 жыл бұрын
Awesome stuff man keep it up but I have a suggestion I run duals on my John Deere had same problem with air so I just flipped the inside tire around valve stem towards the transaxle and the outside tire valve stem out problem solved with out drilling but you do lose bout a inch or two of wheel width total because of the way the rims are made you'll see if you try it
@chud3274 жыл бұрын
I tried that, but my tires rubbed when i flipped them...thanks for watching.
@a_quick524 жыл бұрын
Nice video. I know I’m late but what’s that Massey Ferguson hood for at 5:10? Also I think it’d be nice to have a bigger lift in the back but like a real lift instead of just lifting the fenders. Either way great video!
@chud3274 жыл бұрын
That hood is for my 245 Massey tractor. I do need to lift the rear some and thanks for watching.
@michaelchristley10824 жыл бұрын
How you think you would do it with a 1st Gen Craftsman.... Would I do it the same way like you did
@chud3274 жыл бұрын
I bet that it would be similar in some ways. thanks for watching.
@jam83803 жыл бұрын
Have big tires on the front of a pool on and then put dual big tires on the front
@eastamericantrains5895 жыл бұрын
When you lifted the back the fenders and seat just bent up. I don’t know if that’s what your going for but that’s what happened.
@chud3275 жыл бұрын
The seat was leaning back too much, this really helped out. Thanks for watching.
@hillbillypeakgarage67975 жыл бұрын
Put about 3 nuts between the trans and mounting brackets it will work better.....and realine the belt
@chud3275 жыл бұрын
I could try some little adjustments like that, thanks for watching.
@FastFactoryInc.3 жыл бұрын
this really inspired me to find a lawn mower lol.. except mines gonna be real big in the front just not the rear
@Baltimoreed Жыл бұрын
Why not just get a longer bolt and go through your seat bracket, fender and lift metal into the chassis? I like the idea of a rear lift and will do that for my trail mower. Thanks.
@chud327 Жыл бұрын
Good idea and thanks for watching
@mtdracer695 жыл бұрын
5TH!!!!!! I think the poulen needs 2more inches and then it will look equal , I think you should cross the bridge. P.s speaking of crosses I like the one on the John Deere that is a must have on my mower ✝
@HillbillyOffroading5 жыл бұрын
I agree!
@chud3275 жыл бұрын
2 more inches would look good... I have been meaning to put more crosses on stuff, but keep forgetting. My dune buggy, Civic, Pilot, and the old van all had crosses. I need to get back into that habit.
@chud3275 жыл бұрын
Thanks!
@mtdracer695 жыл бұрын
@@chud327 jesus is never out. Of season, just. Went out to the shed tonight boom! Reflective cross right up front
@jaidonnorwood39553 жыл бұрын
My treater new tiers
@chud327 Жыл бұрын
Thanks for watching
@thewoodwardfamchannel8 ай бұрын
Where do u get aftermarket tires and rims
@chud3278 ай бұрын
most are from Facebook marketplace and many came from gopowersports.com... thanks for watching.
@Chaseofthepawpatrol033 жыл бұрын
Is it safe to run a Lawn Moore straight piped
@chud3273 жыл бұрын
I have heard it is bad on the exhaust valves, but my son ran his v-twin with no exhaust wide open for years, it never seem to hurt it... I guess my answer is possibly/maybe... thanks for watchig.
@UN_masked_5 жыл бұрын
First off loves the video and second off u should paint the lift yellow
@chud3275 жыл бұрын
Super to hear that and we will see. Thanks so much for watching.
@RockeyDAproductions5 жыл бұрын
well, i think you need to add thoes 4 bolt hubs to your ebay shopping cart. finish your lift with some big tires.
@chud3275 жыл бұрын
Yes, I need a couple and then maybe a couple more... Thanks for watching.
@TheWolverine-rm2kr5 жыл бұрын
@@chud327 like those huge tires on a honda 3 wheelers
@robbiedoolin43175 жыл бұрын
So is there no way to get the rear pully up and away from the watter?you really didn’t lift the rear of the mower
@chud3275 жыл бұрын
Like I said in the video, I did a suspension lift in the front and a body lift in the back. The body lift allows for bigger tires which would keep the pulley out of the water better. If I do a suspension lift on the back, which will be a lot of work, I will be sure to make a video on it. Thanks for watching.
@nabielsuleiman70394 жыл бұрын
Black!!!
@forestlawrencegrading91545 жыл бұрын
It sure be nice if tinkering with old cars and trucks could be a little less costly like the mowers at least you got enough bodies around there you could start some kind of business
@chud3275 жыл бұрын
Old cars and truck have become outrageously high, I was at a hugh car show today and some of the prices were unbelievable! I will have to stick to mowers. Thanks for watching.
@weyrunner28383 жыл бұрын
did ya scare the hell outa those kids with that beast machine?
@Errorfp5 жыл бұрын
10-4
@chud3274 жыл бұрын
Thanks for watching.
@exoduswilcox20945 жыл бұрын
Bumper on kernel kraftsman
@chud3275 жыл бұрын
I am planning to, I just need to find the material I want to use. I may stop by the recycle place and try to pick something up. Thanks for watching.
@thelawnmowerboy96465 жыл бұрын
Are the votes for dually Poulan higher than the dually deere?
@thelawnmowerboy96465 жыл бұрын
Nevermind, did not watch the whole video to see you dulled the poulan.
@chud3275 жыл бұрын
They were over twice as many for the Poulan... However, I want to dual the deere too. Thanks for watching.
@chud3275 жыл бұрын
Cool.
@Cataklixxx2 жыл бұрын
My 14 year old self thinking here but say i didnt mind the aggravation and annoyingness of doing it could i not rig something up to use a chain instead of a belt?
@chud3272 жыл бұрын
Chain would be cool, but you would need some kind of torque converter of clutch system to work it. thanks for watching.
@Cataklixxx2 жыл бұрын
@@chud327 i mean chain = no slip so ima make it work one day when i decide to make one( a mud mower)
@chud3272 жыл бұрын
@@Cataklixxx that will be cool
@Errorfp5 жыл бұрын
Like a 4 in lift kit
@chud3275 жыл бұрын
Good idea and thanks for watching.
@Azungii5 жыл бұрын
I think I wanna build me a mud mower got a 17.5h craftsman sitting outside and I think the only thing wrong is timing
@chud3275 жыл бұрын
Nice, get to work and keep me up to date on it. Thanks for watching. BTW, I have a timing / broken key video...
@braedenfuller67865 жыл бұрын
He needs to do higher in the back or lower in the front
@chud3275 жыл бұрын
Thanks for the suggestion and thanks for watching.
@braedenfuller67865 жыл бұрын
Np
@stephaniehart82415 жыл бұрын
flat black
@chud3275 жыл бұрын
Me too and thanks for watching.
@RanchKings2 жыл бұрын
I wanna make my lawnmower lifted but I’m lowkey sped so Idk how
@chud327 Жыл бұрын
Maybe someday, thanks for watching
@ethanpark37162 жыл бұрын
lil toot 😂
@chud327 Жыл бұрын
Thanks for watching
@zne87755 жыл бұрын
Put the bumper on the craftsman
@chud3275 жыл бұрын
I found one for it on Saturday that was made for a golf cart. I plan to modify it and put it on, it has a winch mount too. Thanks for watching and for the suggestion.
@zne87755 жыл бұрын
Glad you found one!
@chud3275 жыл бұрын
Me too, just got to get it on...
@zne87755 жыл бұрын
I cant wait to see it in a future video!!
@chud3275 жыл бұрын
Me too!!!
@i2aspire5 жыл бұрын
I think flat black
@chud3275 жыл бұрын
Me too and thanks for watching.
@blikmblakm69753 жыл бұрын
4
@chud327 Жыл бұрын
Thanks for watching
@bradleychildress8745 жыл бұрын
You should snorkel your mower
@chud3275 жыл бұрын
Maybe some day, but up next I want to put and exhaust stack on it. I picked up some chrome motorcycle exhaust today, I think it is going to look so cool. Thanks for watching.
@kobykremling97425 жыл бұрын
Go 6 or7
@chud3275 жыл бұрын
Thanks for the suggestion and thanks for watching.
@boatbuilder19544 ай бұрын
Not really a rear lift kit as we assume it is rather a "seat lit" I don't call a piece of perforated steel tube a "lift kit" but you can call it anything you want meantime I am looking for information on a "Rear Lift Kit" !
@chud3274 ай бұрын
In the real world there are body lifts and there are suspension lifts. This would be a body lift. Thanks for watching.
@TroyBuiltPony4 жыл бұрын
yellow
@chud3274 жыл бұрын
Thanks for your vote and thanks for watching.
@reesegaster16115 жыл бұрын
Paint it yellow
@chud3275 жыл бұрын
I painted the custom exhaust bracket yellow for my next video, I hope you will check it out when it comes out...
@reesegaster16115 жыл бұрын
@@chud327 Definitely, I had to catch up on the last 3 and now about to watch the car show vid, btw where do u live?
@chud3275 жыл бұрын
Sweet, I am just north of Jacksonville, FL. Where are you?
@reesegaster16115 жыл бұрын
@@chud327 awsome Upper Sandusky, Ohio
@chud3275 жыл бұрын
You guys are freezing, yes?
@danielwhittington45592 жыл бұрын
Paint it black
@chud3272 жыл бұрын
Thanks for the suggestion and thank you for watching
@huntersgarage54495 жыл бұрын
Do a more even lift not a body lift
@chud3275 жыл бұрын
We will see and thanks for watching.
@user-rx7sn9tp3h2 ай бұрын
That ain't nothing but a body lift. That doesn't do anything for ground clearance
@chud3272 ай бұрын
It now has 27 inch tires on it which does do something for ground clearance. I doubt 27 inch tires would fit with out a body lift. thanks for watching.