Putting the clock movement into Beat. Clock repair basic timing and regulating tips explained.

  Рет қаралды 10,880

Tick Tock Productions

Tick Tock Productions

Жыл бұрын

A video lesson for the beginner to put the clock in beat. This is a shorter version of the detailed explanation in the complete full length 4+ hour clock repair course “Clock Repair 1 and 2”. The basic concept of timing and movement regulation is explained here. There are many more lessons and tips discussed in the full length course.
You can ENROLL IN A FREE mini CLOCK REPAIR BASICS COURSE here: www.ticktockpro.com/free1.htm
ABOUT THE FULL COURSE:
The full clock repair video DVD course is over 4+ hours of clock repair lessons. A course manual is provided.
Don’t want DVDs? Want instant online access? The complete full course is also available at our ONLINE SCHOOL: online.ticktockproductions.com This online version is exactly the same videos and information contain in the DVDs and course manual. All the online school courses offer a certificate of course completion at no extra cost. This is only available for completing each full paid course. A certificate is not available for the free mini basics short course.
The full clock repair video DVD course version: This clock repair course consists of 2 volumes for a total of 4 DVD discs playable worldwide. Total course running time: 4 hours and 21 minutes. There is a detailed 38 page repair printed manual full of additional tips, illustrations and diagrams. Included is a 4 page DVD/video program outline is included for going back to segments you may need to review. All tools, materials, and equipment used in this video course are listed in the manual for easy reference to model, make, price, and where they can be purchased.
All the courses are at: www.ticktockpro.com Tick Tock Productions.
See and understand with close up shots of actual clock repairs. Learn with minimal and common tools. Many of the tools are adapted for clock repair from everyday ordinary tools. Not a lot of expensive equipment.
Full length courses at the ONLINE SCHOOL: online.ticktockproductions.com FULL LENGTH DVD COURSES at www.ticktockpro.com
I have published many clock and watch repair courses over the years. Here is a list of the products published:
• Clock Repair 1 and 2 www.ticktockpro.com/ANTIQUE-C...
• Advanced Clock Repair www.ticktockpro.com/advanced%...
• Professional advanced clock repair www.ticktockpro.com/PRO%20clo...
• Introduction to Watch Repair www.ticktockpro.com/WATCH-REP...
• The Watch Repair Course www.ticktockpro.com/WATCH-REP...
• Watchmaker Clockmaker Lathe Basics www.ticktockpro.com/Lathe%20B...
• Watchmaker Clockmaker Lathe Projects www.ticktockpro.com/Lathe%20P...
• Clock Case Repair and Restoration www.ticktockpro.com/Clock-Cas...
• Wooden Works Movement Repair www.ticktockpro.com/Wooden%20...
• The Horological Library online.ticktockproductions.co...

Пікірлер: 15
@TickTockPro
@TickTockPro Жыл бұрын
Get my free basics course here: www.ticktockpro.com/free1.htm
@hosocat1410
@hosocat1410 Жыл бұрын
Clearest demonstration of putting a clock in beat that I've seen on KZfaq. Thanks!
@TickTockPro
@TickTockPro Жыл бұрын
Glad it was helpful for you.
@user-zh9qg8xv6u
@user-zh9qg8xv6u 11 ай бұрын
What a great and very helpful video! I fixed a Grandmother clock that has not worked in years. The crutch on it was more of a flat rectangular piece of brass versus a round metal rod. I had to hold it tight at the top with one pair of needle nose pliers while using another needle nose pliers to bend it clockwise. I got luck and hit it perfectly on my first attempt. I leveled the clock with a digital level to 0 degrees and it sounds and works great. Thanks again.
@aldimmett
@aldimmett Жыл бұрын
Thank you John for showing me how to adjust the crutch and how to make an adjusting tool. This video was very helpful and informative.
@TickTockPro
@TickTockPro Жыл бұрын
Glad it was helpful to you!
@munnerlyn3
@munnerlyn3 Жыл бұрын
Good job.
@TickTockPro
@TickTockPro Жыл бұрын
Thank you! Cheers!
@jessicaa3623
@jessicaa3623 Жыл бұрын
Thank you just ordered my first beat amplifier and was unsure of how to use it.
@TickTockPro
@TickTockPro Жыл бұрын
Glad I could help you!
@marvlinke7453
@marvlinke7453 Жыл бұрын
It would have been nice if you had zoomed in towards the mechanism. Thanks for doing these
@johnbrodehl9743
@johnbrodehl9743 4 ай бұрын
The clock should be leveled before any adjustments are made.
@TickTockPro
@TickTockPro 3 ай бұрын
Yes, that is correct.
@johnbrodehl9743
@johnbrodehl9743 4 ай бұрын
It should be pointed out, that not all crutch adjustments require bending.
@TickTockPro
@TickTockPro 3 ай бұрын
Yes, there are some other variations.
ПРОВЕРИЛ АРБУЗЫ #shorts
00:34
Паша Осадчий
Рет қаралды 7 МЛН
39kgのガリガリが踊る絵文字ダンス/39kg boney emoji dance#dance #ダンス #にんげんっていいな
00:16
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
The Forgotten Clock - Restoring a Beautiful Torsion Clock
21:21
Richard Perrett Watchmaker
Рет қаралды 41 М.
How to put a pendulum clock in beat
20:07
okbridges
Рет қаралды 190 М.
How to easily set beat on torsion clocks
7:24
Torsion Dell
Рет қаралды 4,2 М.
Adjusting the striking of a cuckoo clock movement
33:54
Bradford Needham
Рет қаралды 89 М.
006 Clock mainsprings for the beginner
9:39
How to repair pendulum clocks
Рет қаралды 92 М.
Broken 1885 Gilbert Clock (Restoration)
19:30
Watch Overhaul
Рет қаралды 140 М.
How to put a clock movement back together - clock repair basics
8:10
Chris clock repair
Рет қаралды 63 М.
complete vintage mantel clock restoration (long version)
38:26
MJL Restoration Shop.
Рет қаралды 7 М.
ПРОВЕРИЛ АРБУЗЫ #shorts
00:34
Паша Осадчий
Рет қаралды 7 МЛН