Putting the finishing touches on this two year rebuild of the RCSB Silverado

No video

Putting the finishing touches on this two year rebuild of the RCSB Silverado

Рет қаралды 57,085

Күн бұрын

This build has been sitting long enough, it is time for it to get finished. Actually, it hasn't been sitting at all, I just put off the finishing touches until it was time to put it up for sale. We need to fix some dash emojis and make a few of our options work again.
If you are here to see the struggle, I caused myself, click here: • Tracking down a unique...
If you are here because you want one of the few remaining rust-free RCSB Silverados, click here: www.vehcor.com...
Amazon store: www.amazon.com...
For Vehcor merch: teespring.com/...
#chevy #silverado

Пікірлер: 244

@WasterSpace-lp3zg 10 ай бұрын

Good old regular vehicles getting the Vehcor treatment. No flash expensive rubbish here just the real world. Thank you Scott for keeping it real.

@vehcor 10 ай бұрын

Thanks for the support!

@trevorjarvis3050 10 ай бұрын

@@vehcorhey Scott… if you wouldn’t mind… at the 20:00 mark you spoke about the TSB and RTV around the knock sensors. You said it’s like a little dam and that you let it set up before installing the intake. Are you meaning completely setup? If so, how thick/tall was that bead of RTV? What determined the diameter of the bead? Obviously I’m asking cause I threw a code. Thanks man

@jennifurzoe1302 10 ай бұрын

@@trevorjarvis3050think he quarter inch and to let it set up.

@jeffpowell8308 6 ай бұрын

Scott have you ever had a pervious owner contact you to say that you fixed their old vehicle?

@terrallputnam7979 10 ай бұрын

These are the builds that regular people buy, and drive for years. Thank you Scott.

@SST11B 10 ай бұрын

Because I'm an Internet master mechanic and vehicle restorer, I admit to clutching my pearls through the whole repair, tsk tsking at times...then a sigh of relief, and some quietly whisper words of encouragement and respect... "Holy shit that turned out nice!"😂 Great work man, really, as always! Hope it sells well for y'all.

@brianr987 10 ай бұрын

Damn, I don’t remember this build. Good job!

@brianr987 10 ай бұрын

What happens to the Coyote?

@brianr987 10 ай бұрын

Color change. Crazy. I respect your work.

@alansmith4734 10 ай бұрын

I watch a lot of movies, and I chuckle when they show a car that is two-tone when a door, trunk, or hood is opened and the interior color doesn't match the exterior. Your paint job was awesome!

@vehcor 10 ай бұрын

Thanks, it is even more common now with wraps becoming popular.

@synseer8484 10 ай бұрын

Absolutely beautiful truck! Seamlessly executed.

@vehcor 10 ай бұрын

Thank you!

@BrucePierson 10 ай бұрын

Missed you last week. Welcome back. Good to see this one back. It'e been a while.

@vehcor 10 ай бұрын

I had lots to do, like dusting off this build! 😂

@timkaldahl 10 ай бұрын

I second that, but I'm glad you took a break too. I'd hate for you to burn out and stop making videos.

@michaelwebb4833 10 ай бұрын

Thanks Scott for a well used rebuild I almost forgot about all the issues they were prone to keep em coming 😊

@steveoh9838 10 ай бұрын

Great tip. I had to get my ABS module done about 10 years ago. Don't remember the company, but yeah mailed the unit off and was back a few days later. At the time was a 100 bucks. I put foil around the top of the solenoids and drove it that way while waiting, no problems. Been great ever since.

@dave3156 10 ай бұрын

Nice truck! Been waiting to see the finish of this build and it didn't disappoint--great job as usual!

@vehcor 10 ай бұрын

Thanks, one of the last ones with rockers in the north. 😂

@PlayscBricks 10 ай бұрын

@@vehcor One here in NE Ohio. Orginally a NC vehicle. Currently fluid filming it and not driving it in the winter.

@thagerdorn2009 9 ай бұрын

@@vehcormy 04 Suburban Z71 has been an Ohio truck all its life and it still has solid quarters and rockers and literally no rust on the body anywhere i can find, or underneath...quite shocking to me as all three of my other GMT800s were rotted

@joelstrauss7200 10 ай бұрын

This man is a magician

@vehcor 10 ай бұрын

I’m still practicing pulling a rabbit out of the console. 😂

@joelstrauss7200 10 ай бұрын

@@vehcor with what I've seen you do its not impossible

@justinweier4099 7 ай бұрын

I just wanted to say thank you for this video series. Been working on a 03 Sierra 2500HD since last summer. I didn't have the wisdom to start with something rust free 😅. Instead I started with a low milage used and abused Wisconsin "yard truck" that thankfully had a decent frame . Swapped the bed last summer and just picked up a rust free cab yesterday. Your videos were super informative. From how to get the dash apart to how to disassemble the cab panels. Really appreciate all the work, information and humor. Thank you!

@rfreitas3298 10 ай бұрын

Nice work Scott

@vehcor 10 ай бұрын

Thanks!

@JasonMcCord-qk3yb 5 ай бұрын

I love this project!!! As a bodyman myself, you did this project exactly the way I would have, with only a few exceptions. While you had the cab off, I would have changed the knock sensors, oil pressure sender and rear main seal. As long as it has 75,000 miles or more, that is… That would have also been a good time to check for any other leaks, like the oil pan, valve covers, etc. with no cab and fenders, it’s a breeze. This is your most practical build!

@Natesgarage123 10 ай бұрын

Great content Scott

@vehcor 10 ай бұрын

Thank you!

@billbowers268 10 ай бұрын

Hey Scott great seeing you .

@vehcor 10 ай бұрын

Thanks for the support!

@johnmurphy6366 10 ай бұрын

Scott’s detail,vacuum emporium!!

@richardblakely7219 10 ай бұрын

We did this job on my 2012 Tahoe. Removed intake manifold and found NO knock sensors! Bought an updated service manual and found on 2012’s, knock sensors on outside bottom of engine. Replaced them in 10 minutes. We could’ve saved 3 hours removing intake manifold. Oh well! Great job, Scott!

@hadnotandsons9308 10 ай бұрын

Awesome build. I am working on a 1999 Silverado i bought from copart in Longview Texas. Thank you from the inspiration

@vehcor 10 ай бұрын

Good luck with your build. It should be nice and rustfree from down there!

@cavtj1 10 ай бұрын

Great job Scott. I would have guessed a little more money than you are asking for this truck. From what I can see, whoever buys it, is getting a good deal! Thanks for posting this and keep 'em coming.

@chrissiano381 10 ай бұрын

If I needed a truck. Scott is who I would buy from.. Great job.

@todaywithbk 10 ай бұрын

Fantastic job and as always very detailed work!!

@vehcor 10 ай бұрын

Thanks for the support!

@LouJustlou 10 ай бұрын

Two trucks enter. One truck leaves. There can be only one. 😊

@ebersilv6496 10 ай бұрын

I replaced the knock sensors on my chevy once and build a wall around the one in back. Good memories. But Scott cleaning something, that's a miracle.

@jdretiree2433 10 ай бұрын

If it weren't for Mr. Spotty and the four legged inspector helping out, I bet half these projects would never get finished.

@Twin_Flyer 10 ай бұрын

Another great project that I wish were mine!

@markb.1259 10 ай бұрын

I had forgotten about this rolled red Chevy truck. I learned a lot from this video! Thanks Scott!! Scott, in addition to the Haters' Tears coffee mug, you gotta make and sell a Haters' Tears insulated water bottle, just like you show on your vids!!!

@vehcor 10 ай бұрын

That water bottle is available.

@patjohnson3100 10 ай бұрын

I really enjoyed this rebuild. Thanks for saving this great pickup. It's the ultimate in recycling. Excellent job. The buyer of this pickup will be fortunate.

@kenmurray4232 10 ай бұрын

Nice job on the rebuild. Truck turned out nice. Scott cleaning was a good plot twist. At least you didn't cave on the interior cleaning. That's what the gnomes are for.

@alexanderkajdi8117 10 ай бұрын

Scott you are “The Man” when it comes to truth in automotive rebuilds and repairs. Can you do a segment on Honda Pilots with the J35 engines explaining the pros and cons of Variable Cylinder Management (VCM) and how to bypass / defeat it.

@brettlarson2764 10 ай бұрын

Reminds me of my younger years. Had a 02 rcsb stepside black z71 5.3 . Loaded truck with dual power buckets. Man I miss that truck. Also had a 99 rcsb dark blue z71 with blue interior, that was the first rebuild I ever did at 16. We got the truck rearended and I put a bedside on it and straightened the frame. Put a plow on it and plowed a few years with it. Did a lot of things a 1/2 ton shouldn’t have 😂 oh to be young again

@BrucePierson 10 ай бұрын

Nice truck. You'd never know it was the same piece of junk you started with. All fully serviced and ready for a new owner. Probably sold already!

@jimwiskus8862 10 ай бұрын

It’s really nice now that you got a hold of it. Have a great weekend Scott. All the best to you and the crew. See you in the next episode.

@patrickzadd5215 10 ай бұрын

Scott Love your channel I marvel at your craftsmanship! keep up the great work!

@juanpalos3657 10 ай бұрын

Like always excellent work my friend truck looks great. Shout out to you from Mexico

@selfmadeproductions934 7 ай бұрын

Owned my 05 since 06 at 27k miles, check engine has only came on twice since then but nothing serious and not knock sensor either, almost at 300k now and I also beat on it daily and it’s had 9 sets of big wheels while also stil beating on it and towing, still going strong but it’ll need a 6.0 soon lol

@Apodalont 10 ай бұрын

Anyone who has anything negative to say about the level of work Scott does needs to get a life. I challenge anyone to look over that truck and know it's been re painted let alone rolled over. Nice job!

@jayjudd6518 10 ай бұрын

Amazing work. Following

@ericingram7864 10 ай бұрын

After watching the cam sensor vid and then coming back over here to finish, I agree with sensors and the like needing to be OEM. You didn't mention the gaskets... I avoid oem like the plague...Fel-Pro or nothing for me.

@RT4Him 10 ай бұрын

Scott this has to be near the top of my favorite builds list. Fantastic job. Someone is getting a great truck.

@andynicoll8566 10 ай бұрын

I always knew that under that gruff exterior there was a "Clean Freak"!

@a.c.m.e.ink.4568 10 ай бұрын

3:35 But it was so much cooler as a convertible ! 😆

@vehcor 10 ай бұрын

A little too cool in the winter! 😂

@a.c.m.e.ink.4568 10 ай бұрын

@@vehcor So the new owner, just has to add a few more layers of clothing ! 🥶

@stevenayala2324 10 ай бұрын

Scott i just wanted to thank you for the info for upfix i had my ebcm done by them too wit out you would have not known about them if it wasn’t for you

@garrettsnider9977 10 ай бұрын

The red roll over is the video that got me subscribe to vehcor love that it’s finally done

@bearing_aficionado 10 ай бұрын

Happy Friday, Scott!🍻

@vehcor 10 ай бұрын

Same to you!

@kimkramer5773 10 ай бұрын

Thank you

@terrallputnam7979 10 ай бұрын

I did the same thing on an OBS Ex Cab Silverado and a 2000 Suburban. Those Harbor Freight ports powers work great.

@garthbutton699 10 ай бұрын

Sweet ride.....thanks for remembering to finish this short bed🤗😎🤗😎

@johnmehaffey9953 10 ай бұрын

Just checked the video on your problem scott just shows that unfortunately if you don’t follow your own rules it can hurt you but at least you found the problem before you sold the truck on, great post and very instructive

@andrewbetschman3175 10 ай бұрын

@vehcor I hope you have a great weekend!

@vehcor 10 ай бұрын

Thanks, you too!

@buckpowers4837 10 ай бұрын

An Arkansas truck thay just keeps on rolling thanks to the pro work that was done.

@krulux 10 ай бұрын

Nice work! You always do a good job and do it right... love these old trucks... still look great and are fine for work and play... and the best thing affordable!

@user-ot1hn1yb6y 10 ай бұрын

nice truck exactly what i need to do stuff with..

@dougeaton2446 10 ай бұрын

What a beautiful truck man anyone that buys that truck should be proud because that is a nice rock solid truck

@crazikyle 10 ай бұрын

Your videos are always the highlight of my week. Thank you.

@hrxy1 10 ай бұрын

Nice to see the wandering gnome again

@jamesterrill1938 10 ай бұрын

Great video, as usual...

@1STLAR2147 10 ай бұрын

Was questioning your sanity on this one! Hush my mouth! LOL Thing turned out gorgeous! Damn shame about not getting that pizza! Need to send the foreman shepherd on a pizza run. Just don’t give him your credit card! That unexpected overnight order of 10,000 dog toys, and a prebuilt fully furnished dog condo? Amazon is a scary place! 😂

@robschaffer2189 10 ай бұрын

Awesome! I should have been saving my money when you first started this repair... This is gorgeous! Short bed regular cab 4x4s are so cool. It'll be gone quick for sure.

@glenharper3136 10 ай бұрын

Thanks for the video Scott.

@ajsmith2142 10 ай бұрын

Can we get a workout routine video? Or a nutrition guideline? I mean… I’m doing something wrong for sure … whole family is jacked

@roybeanjr9352 10 ай бұрын

Nice to see the recap and the finish. Nice truck.

@braddocksgarage 10 ай бұрын

I will now and forever call the void between the intake and lifter valley "Narnia." I will however, continue to call the area between the intake and oil pan "Never Never Land."

@dspatchin 10 ай бұрын

Saw shadow gnome, pizza girl, painting gnome, supervisor and headliner gnome all in one video!

@johnboywaltonbeard4699 9 ай бұрын

Scott…Great Series! I enjoyed every video. Now I want to go tear apart a Chevy truck. Have you seen where the mice chew the foam and live under the manifold? While in there, they chew up the Knock sensor wires!!

@peterparsons7141 10 ай бұрын

Very helpful info for the brake module. Thanks for that… nice truck…why can’t more shops rebuild trucks properly.

@mikechiodetti4482 10 ай бұрын

Nice looking pickup! Good for another 20 years or so. There's always a few "extras" when fixing vehicles lately. Like when my neighbor has a "broken sprinkler." Can't wait to see what happens when the clocks get turned back on Nov 5th. I don't have a Supervisor like you. Maybe that's a plus?

@jwctech 10 ай бұрын

My son just finished 1 of these, but its 4x4 long bed...he loves that truck..great info as always, OEM FTW...Sucks for cost, but a requirement most of the time, with gm electronics 💯🇺🇸🇺🇸

@Zip_Zero_ZILCH 10 ай бұрын

Red rollover, red rollover... Send Vehcor right over!

@Mr572u 10 ай бұрын

Atlanta Speedometer repaired mine. Fast turn round too!

@andyl5134 10 ай бұрын

the bolt for the cam sensor sitting in the valley so close to an intake port was giving me some anxiety 🤣

@user-yf2qu7bn2c 10 ай бұрын

Outstanding job! Quality work, lot's of pride and workmanship. MT.

@joeybaez1745 10 ай бұрын

You are truly great at your craft, great job

@cyberhornthedragon 10 ай бұрын

back when you cut the roof off i should have said hey look its a california convertible option it looks like it came out lookin great

@truthserum8326 10 ай бұрын

Watching this reminds me of the time I was required to replace the intake manifold gasket on a 99 1500 Ram truck I had just purchased. Glad it wasn't as involved as this Chevy truck was. Think I will stick with the Dodge as it still runs great.

@joshuamerrill2422 10 ай бұрын

I love these old chevys

@hectorsilva2835 10 ай бұрын

Nice work man , keep it going, I like the way you explains the work

@patchmack4469 10 ай бұрын

good effort Scott - a half descent and respectable rebuilt giving the old lady a new lease of life for someone - them new parts must have near doubled the value of the vehicle (perhaps worth more than the vehicle) - my poor old Audi S3 is now off the road, getting too expensive to run in the UK, but a chance to slowly slowly strip and rebuild, cleaning bits too, well you know what its like Scott, got to clean for the clean freaks sake

@klc317 10 ай бұрын

Turned out very nice.

@toddscanlon6714 10 ай бұрын

i will be needing one in May 2024 😃

@TundeEszlari 10 ай бұрын

You are very good KZfaqrs.

@vehcor 10 ай бұрын

Thanks.

@jeffwrightsman7797 10 ай бұрын

Nice work as usual.

@JDDMAX 10 ай бұрын

Im late. But noticed a lil drippy drip coming from the transfer case. I wonder if that will need the famous transfer case cover fix.

@floydhelms44 10 ай бұрын

😊....great workmanship!

@aaronsnowden6311 10 ай бұрын

Great looking truck. I would have buffed the headlights but thats me.

@brealdeal3658 10 ай бұрын

Bad News Scott…went to Home Depot today and I couldn’t find a single Razor blade or a Sawsall blade in the parking lot …times are getting tough out there!😒

@akh21849 10 ай бұрын

it's perfectionists like you that make us normal guys look bad lol ..... painting under the dash

@nickrichards7646 10 ай бұрын

yes Scott...why are u cleaning?...your words " your never gonna see it..why clean it" hahaha...😁

@robertoconell2111 10 ай бұрын

Excellent video!

@SuperApplefan1 10 ай бұрын

love it!

@stoneshrink 10 ай бұрын

awesome work.

@catsmr 10 ай бұрын

Nice work!

@mikebuehler6248 10 ай бұрын

Nice looking truck! Excellent work as always!

@BrucePierson 10 ай бұрын

These later vehicles sure are complicated. Gone are the days of a carburettor and very simple wiring harness and of course no computers..

@vehcor 10 ай бұрын

They are getting more complex every year. Also, less reliable!

@nobodyspecial6436 10 ай бұрын

That’s the result of this “throw away” mentality everybody (almost everybody) has adapted over the last couple of decades …

@rafaeltorovip 10 ай бұрын

Instructions to take out the intake in the truck; First, start by taking off the rear bumper 😂

@turbo8454 10 ай бұрын

I've seriously considered this truck. The logistics of my distance away (and f-ing sales tax) have soured my consideration. Nice truck none the less.

@P46345 10 ай бұрын

"Nah, it'll still be red underneath." - Omar

@jerrylittle7797 10 ай бұрын

Proof positive that if you comment enough, Scott will learn! He is now on his way to becoming a clean freak! 😂

@BrucePierson 10 ай бұрын

Unfortunate that you didn't know these things were faulty before you put the cab back on. It would have made the job easier with no cab in the way.

@vehcor 10 ай бұрын

Once you finish the rebuild, you need to discover everything the previous owner was neglecting before they crashed it. It can be like a game of Whack-A-Mole with older vehicles.

@khb3892 10 ай бұрын

@vehcor true, but you can always count on the knock sensors being needed replaced.