QIDI Tech Q1 Pro - Klipper 3D Printer

QIDI Tech Q1 Pro - Klipper 3D Printer - Unbox & Setup

Рет қаралды 3,348

29 күн бұрын

Amazon Links
Buy Q1 here: geni.us/nTgRnw
Recommended: geni.us/JustVlads
QIDI Q1 Pro 3D Printer, 600mm/s High-Speed Fully Auto Leveling 3D Printers with Camera, 60℃ Chamber Heat, 350°C Print Support Carbon Fiber Filament, Tangle Detection, Printing
Dual Z-axis & CoreXY, Fast 3D Printer
Q1 Pro 3D Printer has independent dual Z-axis motors and lightweight CoreXY system. Maximum speed is up to 600mm/s and 20000mm/s² acceleration. This allows for greater precision and high speed printing while still maintaining printing quality.
Full-Auto Calibration & Filament Smart detection
Automated dual sensors allow for more precise auto-leveling and everything ready for you with smart sensors. As well as the intelligent Hall filament runout sensor and filament tangle detection, it can real-time monitor whether the filament is normal or not during the printing process, to ensure the successful printing, making your every printing easier and more efficient.
Active Heating Chamber Temperature Control System
Qidi Q1 Pro 3D printer can actively heat and regulate the chamber temperature. Fully enclosed, accurately controlled chamber temperature (up to 60°C or 140°F) improves print quality and layer adhesion, especially for filaments prone to warping such as ABS, PA and PC.
Print Right Out of the Box
From unboxing to printing in just 10 minutes, perfect for beginners, home use and educational applications. Equipped with a 1080P HD camera with real-time monitoring and time-lapse photography. Mobile APP can be controlled remotely, with 32G-EMMC super large internal storage. Based on Kipper, powerful, completely open source, support custom optimization.
Compatible Materials
PLA、PETG、TPU、PVA、PET、ABS、ASA、PA、PC、Carbon Fiber、Glass Fiber fdm 3D printer filaments etc, 350°C bimetal nozzle meet most materials needs. A new generation of multi-metal hot end hollow design, clog-free direct extruder.
As an Amazon Associate I earn from qualifying purchases
Join Memberships to support this channel:
/ @justvlads

Пікірлер: 16

@JustVlads 24 күн бұрын

Buy Q1 here: geni.us/nTgRnw Recommended: geni.us/JustVlads

@Kimberlie1 27 күн бұрын

You only need to do automatic bed leveling and input shaping. You only need to do the third step of manual leveling according to the tutorial if you still feel that the automatic leveling of the heat bed is not quite accurate. If you look at the bottom of the heat bed, you will see knobs on both sides.

@alexgibson7960 28 күн бұрын

These videos are very addicting.

@APxKP 28 күн бұрын

guessing you had this printer for awhile before reviewing it? seems you got the model before lot of the upgrades and fixes QIDI implemented. @36:42 have a link to that file?

@notchipotle 27 күн бұрын

this is clearly an older version, just like creality K1, they fix a lot of thing, it's sad how some companies sell unfinished product just to keep up with the market

@socketyellow3 19 күн бұрын

What would happen if you leave the doors closed with pla? Also is there a non toxic filament that I can use to have this in my room while watching tv or something? Like I don’t expect it to be quiet but closing the doors probably would help noise. The aux fan apparently is the loudest when it’s closed so might look for a more quiet replacement Not really needed just little nitpicks, most of the time probably won’t matter as I don’t expect to let it run overnight.

@NotxKaapi 14 күн бұрын

On a long print the enclosure can get warm enough to cause heat creep and nozzle clogging

@Collateralcoffee 26 күн бұрын

Why is everyone testing the old one?

@BarrieCowley-hm4cs 24 күн бұрын

I know this is for comments on the video but I am stuck literally.I am unable to log on to Wifi and I do not know how to get Klipper or Orca slicer ,any help would be greatly appreciated. I have printed the included models and they are perfect but only in Pla and this was bought to use Abs Asa etc. Help please.

@gillesreyna1272 22 күн бұрын

Hi, Klipper is already on the machine. Wifi should work out of the box, it's dead easy unless your printer has an issue. you can also use it with an Ethernet cable (haven't tried it) but really Wifi should work. If you're absolutely sure about your network password then send an emailto Qidi support (email written on the printer I think), they're super responsive (mention your order number, it will save you a couple of emails !). There is no point to talk about klipper and Orca till you get your Wifi setup ok.

@NoMercyFtw 28 күн бұрын

You need to tighten your belts, and some printers do better with other slicers

@Hstrow 28 күн бұрын

u have printer outdated before revision. i have after revision and there is lot of changes and improvements

@hipton1989 28 күн бұрын

How do i know if i have the revision or not

@PaulKostrzewa 25 күн бұрын

@@hipton1989 The older version had a pigtail bowden-thing off of the back instead of a port on the left side for filamant loading, also the build plate used to have a single center stop while the newer version has a stop at each back corner. Mine also has an RJ-45 port for network connectivity which I believe the older version dindn't have.

@Hstrow 25 күн бұрын

@@hipton1989 and also bed has more magnet becauses testing version had only 3 and bed was raised when asa printed. and bowden tube with wiring should not touch to top cover anymore .

@hipton1989 25 күн бұрын

@@PaulKostrzewa that kinda sucks i have the old one, but its been working great so cant complain to much