Big brain sh*t

Using a glass or plastic container is easier and prevents the likelihood of a puncture.

+Shawn Conley Man those Huggies boxes are great for storing reloading supplies! They are strong!

Air duster can is a 200 IQ move. I don't have a compressor and I was looking for a solution. Thanks bro 🍻

+james Bradshaw Glad it helped you out!

+357lockdown You're most welcome!

+TeddyBearPL I don't know the exact number of recommended uses but when it gets so dirty I can't see the parts (about 2-3 uses) I replace it

dennis bryan using the purple Green power works good as well since it doesn’t corrode aluminum like purple power or green power.

dynamic weapons solutions

bippie23456 or just use a lube where you don’t have to worry about that

I've seen a couple of videos where they just put the frame in without any further disassembly.

@@daveward1484field strip is all that is needed for these.

+Bass Star since this video was about using the ultrasonic cleaner, I didn't show any of that. The lower rarely needs cleaning, just a quick visual to make sure no dirt or large obstructions are inside the lower or trigger group. It's always important to clean the barrel correctly, but that deserves a completely different video.

Yes

Jack Burton you can, but the Great thing about Lucas is that it coats the parts with an oil Film so you don’t have to put an oil film on them, like barrel or the slide. You clean in the Ultrasonic, blow dry the parts, lube the required contact points and reassemble. If you use Purple Simple Green HD/distilled water it strips all the oil completely off the parts, then after blow drying you have to spray with your oil of choice, wipe off and lube and reassemble. Using Lucas saves time because you are skipping the step of having to wipe a light Film oil on your parts. Lucas is more expensive. For $30 for 2 bottles if it saves me some time and headache it’s worth it. You can also filter the stuff and use it again if you are desperate.

+Dwight Taylor Yep safe for all surfaces

No No not true Spike's will not replace your BCG nickel Boron if u put it in a ultrasonic cleaner ultrasonic cleaner so evidently nickel boron may not work well with ultrasonic cleaners this happened to me after I told spikes I had put in my BCG in a ultrasonic cleaner they would not replace it and I did feel like some of the lubricity was gone off the bolt as well ?? Still learning myself just thought I would share that info.😢

+Jeremy Johnson I'll definitely keep that in mind

Disregard my question. I looked on the Lucas site and discovered they came out with a darker BLUE gun oil in the same bottle as the Reel oil. I had only seen the original RED gun oil they make. Looks like I'll be buying a few new Lucas products. Thanks for the video.

+Dana Carlson Thanks for the comment. I see you figured it out. The entire outdoor line is great. Safe for all surfaces

+TheUofAfan Dynamic Weapons Solutions

put in the shiter then flush

You can reuse it, and reuse it, and reuse it.

Find the head of your HOA. Dump it on their lawn and in their flower garden.

@@williamclaud8856 You do know. That anything that you flush in the shiter, goes to the waste water plant. Then gets dumped into your local river etc. You eventually end up drinking that same water eventually. So it does not bother you to be drinking Lucas oil cleaner and lead? You should dispose of it properly with your local hazardous waste collection service.

No

It will loosen the carbon enough that you can easily wipe it off with a cloth.

Yes

+Tim Wolfe I'll have to check on the specifics but it gets so dirty I wouldn't use it more than a couple of time before dumping

Giant Of The East I use my foot massager. Toss the Glock22 in the massager with hot water and simple green. Run it for about ten minutes take it out rinse dry squeaky clean and lube.

This comment right here!

If you don't know how to clean a barrel... uh... I guess... "welcome to guns"?!?

+John Holbrook check Lucas's website to see if a dealer in your area carries it. Mark P at carbon arms can get you some as well, just shoot him an email or message on FB

brownells has it online

They push out pretty easily

Too right! We use the small Harbor Freight cleaner for jewelry!

+Mkmac2000 True

This one comes to mind.......... kzfaq.info/get/bejne/kKt2rdmEuM3Kfqs.html

That was from the guy not lubing immediately after cleaning it as it was all oxidization damage. I do frames and slides, blow them dry, then immediately lube them and haven't had any issues.

This way can get expensive using the whole bottle of Lucas. Simople Greeen Extreme is good and friendly to the environment.

No, did you read the description?

Bro, you sound like a Lucas ad. You like all products named Lucas. There is a rather prominent LUCAS banner on your wall. All Hail Lucas!

Well there is a reason for that. As a sponsored shooter, I am required to rep the products and promote them. I used them even before I became a sponsored shooter, in fact because I liked them over some of the other lube products I had problems with in the past, I contacted Lucas about becoming a sponsored shooter. Making videos promoting their products is the least I can do to uphold my end of the bargain for the their sponsorship.

BullittMcQueen ok, so you are paid to promote. This is my first visit to you channel, so I had no idea that you were sponsored, but yeah, it is pretty obvious.

I'm not paid. Very few sponsored shooters are paid. I appreciate your feedback. Very few of my videos on my channel are sponsor related, but yes in those videos I am highlighting and promoting products.