Quick Look at WeCreat MakeIt Software (First Release Version)

Рет қаралды 4,232

10 ай бұрын

This video is a quick look at the new WeCreat Vision Laser software.
If you are looking to purchase this machine from WeCreat you can use our affiliate link here: shareasale.com/r.cfm?b=234405... it will help support our channel as well with your purchase.
Check out our amazon affiliate shop with all the laser tools and accessories we may have mentioned in this video: www.amazon.com/shop/freshstar...
or go to www.amazon.com/shop/freshstar... then click on main list.
Our custom laser file designs can be found in my main shop or Etsy shop here: www.freshstartcustoms.com or www.etsy.com/shop/freshstartc...
If you don’t have a Glowforge yet and want to make cool stuff as seen in this video, use this referral link to save up to $500 off of you own Glowforge laser engraver: glowforge.pxf.io/GmOZJ6
Follow us on facebook for other cool projects: / freshstartcustoms
Follow us on instagram: / freshstartcustoms
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Пікірлер: 28

@TheMs407 4 ай бұрын

Thanks for this!! Would you be able to do a video on the process of uploading a design into the software and then engraving it onto a tumbler? Like, from start to finish?

@FreshStartCustoms 4 ай бұрын

If I get time to do this I will make one.

@Truecrimequeen68 9 ай бұрын

Great video

@FreshStartCustoms 9 ай бұрын

Thanks

@ThePapa1947 8 ай бұрын

I wonder if Smart Fill is like the Smart Fill that Xtool Mi Creative Space has. That one uses the camera to see a number of similar shapes of material and does all of them. They provided a number of little wooden key chain type tags. Works great I will test it later today on the Wecreat. I am guessing it is. But I just setup the WeCreat machine.

@FreshStartCustoms 8 ай бұрын

Yes I believe you are correct. After making this video I now believe that is what it is used for after using it more often.

@ThePapa1947 8 ай бұрын

Now to figure out the steps to make it happen.

@angelpondcreations8158 8 ай бұрын

How do we weld shapes together so it only cuts along the perimeter and not everywhere the shapes touch?

@FreshStartCustoms 8 ай бұрын

I don’t think there is a weld option yet that I seen. I do all of my designing in illustrator or Inkscape first then import the file to this software.

@margaretdavis1630 22 күн бұрын

How do I get my we create to engrave and cut. I did 1 and it turned out perfect. The next one the laser hit the corner of the wood and quit. Now it won’t do anything. Yellow light comes on but doesn’t engrave or print. Did it get knocked out of alignment? Did it burn it out? I don’t know the answer. I have tried everything but I am new to laser and don’t know my head from a hole in the ground. Please help!

@FreshStartCustoms 22 күн бұрын

@@margaretdavis1630 could have knocked it out of alignment or could be a heating issue. Contact WeCreat support and they will help walk you through next steps

@allanarthur769 5 ай бұрын

nice video how do i engrave then do a cut at the same time

@FreshStartCustoms 5 ай бұрын

Click engrave on settings on the photo portion of your design then there is cut settings for the vector cut line of your design. On the right side of the software.

@crystalespinoza8453 3 ай бұрын

What is the difference between score, cut, and engrave?

@FreshStartCustoms 3 ай бұрын

I made this video that will explain them better than I can through text, please check this out here: kzfaq.info/get/bejne/eLKWg6yDu8XXdHk.htmlsi=RwMzTlQ5qUFZx7hV

@Truecrimequeen68 9 ай бұрын

When do they ship?

@FreshStartCustoms 9 ай бұрын

Later this month in October they start shipping.

@Truecrimequeen68 9 ай бұрын

Can you turn into svg from here?

@FreshStartCustoms 9 ай бұрын

They can export as a different type from this software, I can’t remember off the top of my head. I can check later. There might be an svg export, I’ll have to look for that too.

@Mnpcreations 9 ай бұрын

So, as it stands right now, I can only save my design in the .wws format (proprietary) that I can see. However, there is an "Extract Image" function that I can't get to work, so maybe that's where they will allow the end user to export files in other file formats.

@FreshStartCustoms 9 ай бұрын

@@Mnpcreations it seems so

@Silk1954 2 ай бұрын

How do you type your own text? "Hello" is getting old!

@FreshStartCustoms 2 ай бұрын

Double click on the hello text then erase it and type something else in

@elainestratton9402 7 ай бұрын

Could you explain layers next time

@FreshStartCustoms 7 ай бұрын

Currently I don’t think layers works as intended. They are ment to be for each function. One cut, one engrave, and one score. Or for any group of a function you want to make them. I can try to explain it after they update it to a more useable state.

@FreshStartCustoms 9 ай бұрын

Be sure to join our WeCreat Users Group on Facebook here: facebook.com/groups/1621878714887002/?ref=share_group_link