Now that's protected A.F.! The guy went the extra mile to the job properly, soldered and then isolated and sealed cables. Very nice work and good video, thank you for recording this for the rest of us. Cheers

Good stuff. Just bought our 2nd ML today (W164). Also have the W163. We love our Benz.

Yeah! really quick and easy! :))

Nice video, but 1 question, why the extra jack? why didn't you just connect the wires direcly and then solder/isolate/protect?

Love your work ! Thanks for the inspiring videos ! And thanks for introducing me to the MAXIECU ! I'm ordering it. Dobre !

When they say owning a mercedes is hard. Not if YOUR FIXING IT YOURSELF 😁

Yeap that was quick and easy bro

Bonjour mon ml500 fait la même panne que sur la vidéo le bouton sport reste bloqué est-ce que je dois changer la prise merci d’avance de votre réponse

Prolly da only person who ever took it dis far 🥴 cuz atp imma juss pay sumbody professional

Hi Can I ask you what is the problem on my mercedes ml 320 2008 because it dosnt up (it is very low state) and the light comes on as it did for you at the beginning of the video. What do you mind on this problem?

I have the same error code, but the contact of the wires near the shock absorber is good. Where else can the problem be?

Thank you good job

Have you had issues with the ride malfunction coming on when there’s a roof box/cargo box mounted? I had this happen to me recently, took my X164 GL550 to the shop, they ran the DAS/Scan tests and found the yaw sensor and one of the rear speed sensors faulty…so they replaced those. Took the car for a test drive and still had the ride malfunction error…they were stumped as to why it keeps giving the fault, then decided to try and remove the cargo box just to see what happens…they take the car for a test drive and no ride malfunction error. So the weight of the cargo box or the added resistance is causing the ride malfunction error? I replaced the air compressor and rear suspension air bags less than two years ago…and I’ve driven the GL a handful of times before with the cargo box on, and this is the first time I ran into that issue.

Hi, thanks for the video. I have a 2011 R350. On the ESP module, I have a code 5557(No CAN message was received from control unit N51-AIRmatic with ADS control module). Pls what do I do to get this fixed as the rear end of my car is down. Thanks again

I have 2012 nl350 bluetec, my sport option doesn't change to comfort zone and i feel all the bump and its very slight bit higher on front passenger side. Please tell me what to do

Nice video!

Hi I own a wdc164ml 2006 my suspension was normal as far as ride height over the weekend i decided to check rear ride sensors arms installed them as i removed them start vehicle front suspension rises but rear. No what have I done wrong no leaks compressor 2years old and valve block please advise

Hi what obd2 cable model are you using?

А как называется сканер каким вы диагностировали в этом видео пневмоподвеску?

👍

Thank for the video my car said avería on the message center did you know what is that

Уменя тоже самая проблема была мы не могли определить меняли блок клапанов не помогало а патом случайно наткнулся на штекер и проблема решилось ана просто не много отошла

Can I ask you what was the symptom that the suspension had before? When I park my GL450, sometimes the rear level goes down and sometimes does not after a while of parking.

Hi there, I have malfunction error coming up my dash when I try to raise my car then process won’t complete and malfunction error will show dash and air compressor will cut out. Also car is leaning on one side. Can you please advise if you had level sensor issue ? Thanks

0578

Votre adresse tel cvp

L