Quick Start Guide SP630e (the best all in one LED controller I’ve ever seen!!!)

No video

Quick Start Guide SP630e (the best all in one LED controller I’ve ever seen!!!)

Рет қаралды 11,480

LAF LoudAF!

Күн бұрын

Пікірлер: 26

@daatack 2 ай бұрын

Hi Barnaby, i have the SP630E controller, loved your video and hoped it would cover my LED strip , but unfortunatley not. I have the "BTF-LIGHTING WS2812B IC RGB 5050SMD Pure Gold Individual Addressable LED Strip 16.4FT 300LED 60LED/m Flexible Full Color IP30 DC5V for DIY Chasing Color Project". It has five wires altogether. Three (red, green, white) are together in a 3 pin jst-sm connector, then 2 others, one red, one white. Not sure which connectors to connect to what on the controller. Would love to hear your advice. Thanks!

@lafloudaf2137 2 ай бұрын

It connects and works exactly the same as my 2812 do in the video

@thepatternforms859 Ай бұрын

Many strips are NOT 5V strips. Lots are 12V strips which means you can connect a car battery directly to the box and not “blow the strip”.

@superscort57 8 ай бұрын

Thank you for this setup video

@miked9959 Жыл бұрын

Your video helped me out, thanks!

@andreiida 3 ай бұрын

Hi my friend, very good video. can you make a video of how to set the schedule? Timer? Thankyou

@123mmmm321 Ай бұрын

Hi, have you tried connecting your controller to the Alexa app?

@darrimartes4099 4 ай бұрын

Hola buenas como puedo contactar a este controlador las ws2815 por favor un esquema gracias

@lapoopenstein Жыл бұрын

Thank you for this barnaby

@matousnemec69 9 ай бұрын

My controller works fine until i connect a strip to it. The small LED on controller turns off when i connect the strip and i can not connect it with the app when LED on controller is off.

@basilmacgill Жыл бұрын

I know which 1 ineed now thankYoi

@browaruspierogus2182 3 ай бұрын

how to set up zones?

@clipz1 7 ай бұрын

i just got this and this prob a silly question but trying to wire these up has been a headace was thinking instead of a converter i saw some btf rgb light that are 12v and seeing this is 12 a max output it should work plug and play so to speak right or would i stil need a converter hope you can help

@lafloudaf2137 7 ай бұрын

We focus on 5v because our LEDs are sk6812 chip. There are many BTF and other brands using other chips in the WS line which are 12v. This controller will work on those too, and no need for power step down

@clipz1 7 ай бұрын

@@lafloudaf2137 i got a powersupply which i can change it from 5v to 24v i tried both the ws2811 12v and 24 v version and in both cases im getting just the back part lighting up showing some colour trying to figour out what i need to do contacted btf they aint much help online

@billfoster6809 7 ай бұрын

Short answer is- For HIS setup you NEED the converter when he is using 5v strips. Longer answer-> 12V is voltage. 12A is the max amperage this can handle. Don't confuse voltage and amperage. You can have a long enough strip of 5v LEDs to surpass 12 amps and burn up the controller. That would be above 60 watts of power. If you used 12v LEDs you would need less LEDs to max it out. SP630e is a Good controller if you want to try different strip and strings. It's compatible with many different strip and string types and can accept voltages from 5v to 24v. But there are many simpler controllers that may suit your needs if you're only using one strip type.

@clipz1 7 ай бұрын

hey thanks yeah i was kinda lost to why the lights was not coming on then i connected all again the other day and it just came on made my jaw drop because i didnt expect it to work but yeah happy now im just connecting these to 2x more covering a big space running around 15 m total hopeuflly i should have no issues now and this controller is great thanks for the help@@billfoster6809

@darrimartes4099 4 ай бұрын

Hola muy buenas me puedes ayudar con el esquema para poner este controlador con las ws2815 muchas gracias

@rebirthsolutions 9 ай бұрын

is the CW a Control Wire? Does having something there switch on the "Data" strip

@lafloudaf2137 9 ай бұрын

DAT is the control wire or data wire for addressable. CW is used for single color 12v led. See the end of the video

@jV-ke4tz Жыл бұрын

How can you sync a bunch of these to work at the same time same effects?

@lafloudaf2137 Жыл бұрын

You can set all the programs to be the same, but they will not start and stop the same place. Best way is to wire all the strips in parallel to one controller and bypass the power direct to the strip and not through the controller

@lafloudaf2137 Жыл бұрын

To bypass power you need to send voltage to the controller so that it will turn on, but not out of the controller. Only data out of the controller. Power and ground will then come straight to the strips from your battery or power source