how do I connect multiple sp630e to one remote controller? tutorial? also does this work as well with the SP636E?

Si guardo una configuración de color e intensidad al apagar y encender el controlador de la red eléctrica mediante un enchufe ¿recuperara la configuración anterior a la desconexión de la red?

Hola muy buenas una pregunta. Me puedes decir cómo conectar este controlador con las ws2815 me seria muy útil un esquema por favor muchas gracias

I have WS2812B LED strip and a 5V power supply...cant seem to get lights on. Any suggestions...thanks

Hi! Can I control the strip by segments with the help of this controller (for example: 3 m - one colour, 3 m - another colour)?

While the BanlanX app v2.5.5 does support SP630E in Device mode it does NOT support SP630E in the group mode. The device does not appear as a choice in the list. Please fix. TY

Can I add (2) 24v light strips to same controler?

Hi. I have a digital rgbw strip connected to VCC, Data, and ground. But it only lights up blue, cant change the color or turn off. Can you help?

Quindi se ho capito bene con il pannello remore posso gestire 4 controller sp 630 e e poterli gestire?Posso accenderlo e spegnerli singolarmente a mio piacimento?

Merhaba 15 metre ws2811 15 metre beyaz 15 metre gün ışığı şerit Led bağlasam hepsini ayrı ayrı kontrol edebilirmiyim

This controller is great, but the app is HORRIBLE. When you open the app it defaults to one randomly selected controller/light, so if you always use a group you have to leave the default controller/light which is random, confirm you want to leave it, then select the group you want to use most of the time!!! It takes 10 or 15 seconds, many presses EVERY TIME. PLEASE add a setting for a default light or group to be loaded on app start every time!! And while there is an option to use White and Color LEDS simultaneously, it ruins the color control! If you select the White and RGB simultaneous option in the settings you can no longer have the White turn all the way down in color mode, so if you select a fully saturated color, it's never a pure color, there's always white light mixed in! If you select a fully saturated color in this mode it should dim the white LEDs all the way off! As you select less saturated colors the white light should be mixed in proportionally and when you select fully unsaturated the white LEDs and all color LEDs should all be at full brightness. And with this White and RGB simultaneous setting selection if you are in white mode, the RGB is not used to get maximum brightness. Ideally in white mode the RGB should be used with the white LEDs and be used to assist the selection of warmer/cooler white light and give maximum brightness. Ideally there would be settings to calibrate color, so RGB LEDS would be used in the correct amounts to assist cooler and warmer white lighting without adding unhelpful color tinting. I would love to wake up in my RV to slowly brightening lighting. You should add the ability in the Android app to set times to turn on, brighten over time, etc. The hardware is great as long as you do not need to use integration with Alexa, Google Home, IFTT. But the app limitations and poorly thought out designs ruins the experience. Also, please make a version of this controller that works with just the remote and local bluetooth app control without any internet connection as this one does, BUT ALSO allows wifi control from Alexa, Google Home, IFTTT. This would be a very powerful combination and allow use when off grid, but take advantage of the cloud when that's available!

Può gestire 4 zone di ws 2812 con diverso numero di led e poterle accendere e spegnerle singolarmente?

What if i want to extend the rgb light

BS 146 color modes. i dont even get 20 color modes from SP630E. The color gradient sucks. Only 7 colors??? Why do i buy RGB lights when it only uses 7 colors? wtf? also the gradient is not smooth at all.