Tamiya Extra Thin (TET) is a mainstay in the hobby, but one of the annoyances is the cap brush that can't seem to reach the dregs when the bottle starts to run low. Here's an insanely, headsmackingly simple tip to address that.
Пікірлер: 157
@mrbyrne24067 жыл бұрын
LOL! Your intro was hilarious - it was like you've been watching me at my modelling desk for the past two years making an idiot of myself attempting to deal with my dregs of Tamiya thin!!! Thanks a million for taking the time to pass on the tip!
@Modelmoth4 жыл бұрын
This video couldn't have come at a better time as I just the other day purchased some Tamiya thin sement. Keep em comin, big thank you!!
@zigbug13142 жыл бұрын
I was aware of this with the brush. I just wanted to comment though to say if anyone has not used this product it is absolutely fantastic. The capillary action is amazing, a little goes a really long way.
@stevenpuderbaugh8213 жыл бұрын
Wow! And I've been using brushes, and losing brushes to using them to get the last remnants. I'm glad I saw this!
@messer10967 жыл бұрын
Wow, what a great bit of info. How did we miss that one? Is it because the bottle is plastered in Japanese?!
@jetpack53 жыл бұрын
If you turn the cap upside down, you can temporarily cap the bottle with it to stop fumes, you can also mix your own from acetone and butyl acetate (model airplane dope thinner) to a 1:1 mix. Same thing.
@Dragonblaster14 жыл бұрын
I have a kanban system on Tamiya Extra Thin. When I am down to one bottle, I order another. When the first reaches its end of life, I tip the dregs into the next bottle.
@peter69925 жыл бұрын
I feel like such an idiot! Brilliant, I had no idea! Thank you for this. This has always driven me nuts!
@Ebergerud7 жыл бұрын
Hidden treasure indeed. I usually use low bottles of Extra Thin and mix them with low bottles of Tamiya Orange - end up with a Tamiya Testors. But, perhaps I'm dreaming this and have a secret desire to keep model companies happy, but I think cement works a little better new. I think this is certainly true with CA. If I do a ship I use a lot of Aleene's Tacky (sweet PVA) and new bottles are tackier. Since observing this I've been thinking about effect when I open a new Tamiya - think that's better too. Not a huge difference, but better. The stuff is cheap.
@dasabaja7 жыл бұрын
"Usefull little tip." No pun intended:)
@GeneElder.R275 жыл бұрын
I use those cheap testors paint brushes. The nylon brush never fuses and if you trim it into a tight angle, you can get really fine application.
@user-sn4km5oo1d3 жыл бұрын
My mind is blown..... Than you for posting this!!!
@richarddavies25294 жыл бұрын
Thanks! Didn't know this either. Probably saved me a spill or two..
@Tony54126 Жыл бұрын
Thank you… that has been driving me nuts. It is the simple things in life for sure….
@johndillon80513 жыл бұрын
Thanks very much! I am just about hit that point with my current bottle.
@bobbysimpson55403 жыл бұрын
Thanks so much. This has been frustrating me for years.
@billblass5961 Жыл бұрын
Awesome, thank you, I just ordered my first bottle. This is probably top secret.
@moparmikesr7 жыл бұрын
Cool tip about a tip I will remember that I really like the extra thin cement thanks
@Enigma-Sapiens2 жыл бұрын
Excellent tip, thank you!
@MichaelWF11252 жыл бұрын
Damn! Did not know this! Much appreciated for sharing!!!
@rickkflores7 жыл бұрын
i could never thought about that
@viper341 Жыл бұрын
Wow that was super useful I'm glad I watched
@fredbatchelor59367 жыл бұрын
Cheers mate I'm going to adjust mine now.
@renestofregen40483 жыл бұрын
Thanks for the tip Had the same problem 👍
@xNevikKx6 жыл бұрын
Thanks for the info! I like their brush applicator and it works for most situations, but the cap sometimes gets in the way or the applicator tube itself isn't long enough. Does anyone know of a similar styled brush that could be used?
@wolfpack46944 жыл бұрын
Another one of life’s great mysteries solved! I’m hitting my forehead going “doh”! That’s super good to know! Thanks!
@schweinhund2277 жыл бұрын
Thanks for the *tip* !
@MosoKaiser6 жыл бұрын
Really cool feature for Tamiya to include, be it intentional or just a by-product of the design. I tend to use a dedicated 00-sized brush for TET and remove the included brush from the cap, though.
@the_zombie_ritual89711 ай бұрын
Hi @mosokaiser - what type of brush do you use and how do you stop the bristles gluing together?
@MosoKaiser11 ай бұрын
@@the_zombie_ritual897 Some type of natural hair (important, won't melt with solvent exposure) size 00 brush that I relegated to liquid cement duties after losing its ability to keep a fine point but still being perfectly good for cemen application. Bristles gluing together is not an issue with liquid cement like Tamiya Extra Thin, since those are essentially nothing but solvent so it alone won't stick bristles together, and whatever miniscule amounts of styrene the brush might pick up when used, potentially causing some stiffening, is instantly liquified when dipped in the cement again.
@the_zombie_ritual89711 ай бұрын
@@MosoKaiser Thanks so much!
@Arcdale2 жыл бұрын
Thank you, a nice simple fix.
@GoultyUK12 жыл бұрын
Wow. I've been using this for ages and never realised.
@MCRoadk1ll4 жыл бұрын
What I did, I removed the brush in the cap and I use a dedicated normal fine brush for glueing. That way you can always get in the bottle. The brush might harden out if you don't use it for a while, but when you use it again let it sit in the bottle for a little bit and the brush will be usable again.
@the_zombie_ritual89711 ай бұрын
Hi @mcroadk1II - what type of brush do you use and how do you stop the bristles gluing together?
@MCRoadk1ll11 ай бұрын
@@the_zombie_ritual897 hi, it's a regular cheap synthetic brush. The funny thing is after you use it, it becomes rock hard, next time you use it, first you put it in the tamiya extra thin and voila the brush becomes soft again. 👍 i hope it helps.
@the_zombie_ritual89711 ай бұрын
@@MCRoadk1ll thanks so much!!
@PeteCourtier4 жыл бұрын
Thanks Brendon👍 Eco warrior and all round decent chap.
@RollingThunderModels7 жыл бұрын
wow thanks for sharing! i never knew that.
@horriblegamer7467 жыл бұрын
well now I feel like I wasted copious amounts of my time cleaning spills for no reason
@madcat10073 жыл бұрын
How do you prevent the brush from picking up paint and then discolouring the rest of the glue in the bottle?
@terrydactyl20776 ай бұрын
I dunno if I’m just super dumb but I always ruin the rod. It doesn’t stay in place and falls out.
@robertcampbell56853 жыл бұрын
Wow thanks for the tip
@Star_cab7 жыл бұрын
Useful tip. I just used a separate brush or use a "flex I file" touch'n flow applicator.
@RobotJeeg3 жыл бұрын
Whaaaaat? O_O That's unbelievable. Thank God youtube exists. 5 minutes agho I was wondering "What can I do to reach ethe bottom of my extrathin bottle...let me see what other people do". I feel so stupid because I already bought a second jar too.
@ramonperedo27515 жыл бұрын
Thank you for this great tip, It really helps a lot!!!
@pinkycoffeeboat7 жыл бұрын
thanks, I found this out a while ago whilst being annoyed by not being able to get the remaining glue. Same thing can be done to Mr Cement S.
@Jawazplebs6 жыл бұрын
Thanks for the vid... I never knew that... Thanks again.
@epicforger123454 жыл бұрын
Omg this is a lifesaver never even knew
@chrisdumas78943 жыл бұрын
Wow! That's helpful to know. Tyvm
@nickhiew78625 жыл бұрын
Well that's a damn big surprise I didn't know this
@briansizer95014 жыл бұрын
I drop a couple of stainless steel nuts into the bottle - that’s raises the level enough to use the last of the stuff! When done - retrieve them and quick wipe down - ready for next time!
@putuplasts79407 жыл бұрын
Thanks a lot, this is golden! :D
@rapscallion35066 жыл бұрын
an extension in the tip? Most excellent Doog-ster... thanks...
@robchallis24233 жыл бұрын
Brilliant thank you
@rhinehardt12 жыл бұрын
Aw cool! And it was there all this time?
@GandRCruise6 жыл бұрын
I add old sprue to the last of the cement allow it to melt and then I can use this gloop as a plastic filler works wonders
@scalemodeling74075 жыл бұрын
Brilliant!!
@ThePaperMaster3 жыл бұрын
Lol thanks i just use plastercine/clay
@GavinKiwiGavColvin7 жыл бұрын
cheers for sharing Doog
@MrStatistx3 жыл бұрын
Already knew this from a differen video, but it blew my mind. You'd think that was something to advertise more XD
@Yankeestopmotion Жыл бұрын
How do you open it
@tifosiman686 жыл бұрын
I take the brush tip and fashion it to a bamboo skewer.
@gregoru987 жыл бұрын
Thanks, Doogs.
@Kabul816 жыл бұрын
Literally a mystery quest tip?😳 Jman👀
@h.cedric81576 жыл бұрын
Well i have been doing that since this super thin cement came out. Guess great folks really do think alike...
@andersdenkend3 жыл бұрын
Thank you Brandon Mikkelsen. I did NOT know that, holy crap... all these years...
@michaelnaven2133 жыл бұрын
Thanks
@skeeterbuck13557 жыл бұрын
You don't need to pull the tip out using pliers. You can just pull the whole brush shaft out of the cap using your fingers and then just press it back in just not as far doing the same thing. I started doing that with the Testors Liquid Cement oh those many years ago. I just thought everybody already knew how to solve this problem. Just goes to show that what you know doesn't mean that everyone else knows it too.
@nickhiew78625 жыл бұрын
Thank you
@hughbyrd98066 жыл бұрын
You can also place a few Marbles in the cement container and get most of the glue out then transfer the difference to the next bottle.
@owenchristie69583 жыл бұрын
That’s smart
@glensiu23154 жыл бұрын
Thank you ,
@Error-54783 жыл бұрын
After having just spilled half of my first bottle........... This came in handy
@todwilson90786 жыл бұрын
I had no idea either....GREAT tip....also no pun intended
@GurtMcDirt5 жыл бұрын
Me either... MY PENIS IS VERY LARGE... also no pun intended
@tonyde64237 жыл бұрын
Hey Doogs, tamiyas design team just let out a collective " what the f@€k". Great tip cheers
@kevinroberts711711 ай бұрын
I bought some of this and I can't get it to stick well. Am I doing something wrong?
@DoogsModels11 ай бұрын
it doesn't "stick". Glue is actually a terrible name for it. It's more of a chemical welder. It melts styrene and then as it evaporates out the styrene cures "welded" together. Need to move relatively fast though as it evaporates quickly. If you can already get the two parts together and let capillary action pull it down the join, that's the ideal way to go.
@charlierichardson95324 жыл бұрын
"Aint nobody got time for that!" Great reference-were you wondering if anyone 'got it?" It was one of the best "man on the street" interviews ever. She was talking about asthma, from a house fire think.
@ITNoetic4 жыл бұрын
Yeah, it's this thing called an "Internet meme"
@mikaelfrigenius1543 жыл бұрын
Or you can take the insert from a used applicator and gain the extra lenght !
@chrisg73982 жыл бұрын
Thank you thank you thank you
@jeramyboileau49675 жыл бұрын
Nice shout out for NUMSA's Pres Brandon.M!!!
@maxschmidt6664 жыл бұрын
They saved an issue that shouldn't be an issue in the first place.
@jerrym9954 жыл бұрын
wish they would have done that with the thick cement
@BennyCFD6 жыл бұрын
Or as I recently found out Lacquer thinner works the same as Tamiya extra thin cement. I would bet that Tamiya extra thin cements is actually lacquer thinner. Lacquer is a very chemically hot solvent that melts plastic. So for the price of a quart of lacquer thinner you could buy 20 bottles of the extra thin cement. Just keep topping off your bottle. I love finding cheaper alternative model building products. People are paying way too much for brand name products. Work cheaper and buy more models. But I like your tip of lengthening the brush Thanks
@theguru186 жыл бұрын
well I don't know whats in TET but its the methyl ethyl ketone (MEK) in Lacquer thinner that doses the weld/melt
@alfepalfe2 жыл бұрын
@@theguru18 Judging by the smell extra thin cement probaply uses acetone.
@jlcsr91632 жыл бұрын
@@theguru18 My guess is Tet is just Mek.
@Roaddbuster6 жыл бұрын
Cool tip~ I have one myself that I want to use for minor repairs and customizing but I’m too worried to use it cause of the crazy cancer warning logo. Is it really that bad? Do I need to wear like a respirator? I have good ventilation in my house since my workstation is near a window, just wanted to ask how you all use it.
@DoogsModels6 жыл бұрын
Caveat - I'm not a doctor. But my understanding is that, at commercial/professional exposure levels, that's where the risk exists. Obviously don't drink the stuff or use it as a lotion. But having a small pot on your desk and using it reasonably, the risks are minimal.
@Roaddbuster6 жыл бұрын
Doogs' Models hmmm, okay well I’m obviously not gonna be drinking the thing like some drunken master haha. But in all seriousness, how do you deal with the vapor that comes out when you open it? Have you ever inhaled it before? I’m not too experienced with the stuff and I tried using it. Just worried about the effects cause of the project I’m working on
@DoogsModels6 жыл бұрын
I do 95% of my work in a garage, with the door opened, with airflow coming from behind me so I rarely have any concerns about ventilation. But even the rare times I do some work indoors, it's a small opening and the cap is usually only off the bottle for a few seconds at a time. It's never bothered me at all.
@Roaddbuster6 жыл бұрын
Doogs' Models so you’ve never really felt any side effects or bothered much of the fumes that come out of the bottle from use?
@DoogsModels6 жыл бұрын
Nope. I'd be more concerned sitting in line at a drive-thru with the windows down.
@justinesmith1207 жыл бұрын
Hey, what's up with the flurry of videos? I keep watching your black basing videos over and over again as they apply to my projects, so your view numbers are skewed a bit. I'm having trouble seeing the marbling, though. I see it on my projects, though, so that's how I follow you. You produced your series just in time for me to paint my Zero and my Spitfire. The Mr. paint is something I'd like to try. Thank You and keep it up!
@DoogsModels7 жыл бұрын
Justine Smith camera sensor + glare from the lights really does a number on seeing the marbling pull through, frustratingly
@justinesmith1207 жыл бұрын
You are awesome! Thanks, Matt!
@apocalypticmoth60403 жыл бұрын
Saw this the day after I bought by second bottle
@KillBoxScalemodelling6 жыл бұрын
M.I.N.D.B.L.O.W.N..... :D What can I say... thanks for sharing this tip ;)
@JeffSichoe6 күн бұрын
thx
@rincobill34594 жыл бұрын
Warm water. You take a tin brush and can resolve
@davidcurtis5398 Жыл бұрын
I just use a dedicated cheep art brush for my applications.
@Cameron40777 жыл бұрын
how long do these generally last ?
@DoogsModels7 жыл бұрын
Cameron S. Quite a while - I've been using TET since 2013 I think (whatever year Revell's 109G-6 came out) and have only bought three bottles.
@alxtrindade87657 жыл бұрын
Wowww, no way!! thanks...!!
@reconmodelsvaughn4694 жыл бұрын
But in Japan they have so many different types of bottles of glue I wish we can get have of what the Tamiya hobby shop in Tokyo has u don't understand why we can't get the same products I have to travel to Japan 3 times a year just to get some of my supplies and models that you can only get in Japan its crazy.
@Bearlake1624 Жыл бұрын
WHAT! GREAT TIP! 🎉
@JeffreyStrader7 жыл бұрын
Had THE accident just now.......:-(..............accidentally bumped my TET knocking it over, spilling half of it!!!!!
@roberthorning38086 жыл бұрын
Jeffrey Sasquatch
@bruce45515 жыл бұрын
Just happened to me fuck
@bktee222 жыл бұрын
Why can't they just design a longer brush that reached to the bottom?
@DoogsModels2 жыл бұрын
Because it'd get all smashed up when the lid is screwed shut
@Shin_Lona4 жыл бұрын
PRO TIP !!!!
@davidcliatt13143 жыл бұрын
Hidden in plain sight😮
@sparshfilms84175 жыл бұрын
WOW!
@oscarruf42607 жыл бұрын
Is Darth Vader speaking?
@1939newton4 жыл бұрын
I just put some small, clean, steel balls to raise the fluid level
@petermot6453 жыл бұрын
👍🏼
@a06cc3 жыл бұрын
You really don’t even need that much of this cement. You could I don’t know always just leave the bottle close. Then proceed to flip the bottle upside down. That will help get the cement to touch the brush??? The person you seen do this really reached there lol
@lothar292 жыл бұрын
huhuhuhu, nice!
@necrokillerj4 жыл бұрын
Lol, from day 1 I knew that 😂
@nickhiew78625 жыл бұрын
Wow
@thewuf6 жыл бұрын
Oh......My.....Gosh................
@crispynuggets91215 жыл бұрын
Why can't Tamiya just put in a longer brush
@Dot2TheLock5 жыл бұрын
It could hit the bottom and and mess up the tip there was an interview in a hobby magazine 7 or so years ago about this I'm going to try to find it... the question about the brush being short
@uvafan9405 жыл бұрын
@@Dot2TheLock I believe, as well as the Japanese build things, they certainly could make a glue bottle brush that does not quite touch the bottom.