I love you. I was an inch away from ripping the handle off the door.

Nothing will test your patience like trying to get this clip out. Thank you so much

Thanks for the info, just had to take one of those m-effers off to replace a broken window and had no idea how to get it off. 5 stars partner! Thanks again.

This is the most helpful video in all of KZfaq - piece of cake! Thanks!

thank you SO much! it helped me remove the door panel on my dodge dakota pickup so i could bang a dent out of the door! i ended up using a miniature 5.5inch pry bar that had a skinny 90deg bend at one end. the screwdrivers didn't work for me but being able to understand what the situation looked like, i chose the other tool to accomplish the same thing.

BIG THANK YOU! All other vids abt replacing panels omit models with manual window mechanisms! A quick tip: On my 97 Accord, one of the clips was 180 degrees backwards, and it was the easist to remove because I simply pulled the clip from the access point on the handle where one would normally push on the ends of the clip. I reinstalled all the handles with the clips back-to-front, since it's exponentially easier and faster to tremove. ON MY MODEL, at least.

Hey Mighty Mechanic, First let me start by saying that I pride myself on how mechanically inclined I am. But this handle removal got the best of me. I just couldn't figure it out. Thank you SO MUCH for sharing your knowledge. I guess now I won't have to cut the plastic door panel around the handle anymore to get the door panel off. (Major Donkey Ears for ME) LOL. Kudos MM, You the Man!

This helped a ton! I’m replacing the speakers in my doors, and I genuinely thought this part would be the most difficult. But it ended up being just as easy as everything else

That was extremely resourceful, as I am swapping out my manual system for the power window system. Thank you!

Best removal demo yet.

Just about to do the speakers on my Silverados front doors. Thanks for doing this, nice video

Thank you. Saved me from wreckless disaster. Almost ready to to forcefully pry it off just to get my '91 door to open. 🍻

Saved me so much time today. Thank you

Cheers bruv. Used the screwdrivers for one crank...Then realised I had the damn tool in the toolbox :P

Bro that was so helpful. I live videos that are quick and to the point

I am searching for this thing for 1 hour and no one explains it, your video was really helpful

The second you took it off my brain was like “DUH OF COURSE WHY DIDNT I THINK OF THAT.” Came off in ten seconds. Thanks bro.

I never knew window cranks contained wishbones. My cranks need to be painted/replaced, so this helps a lot. Thanks!

Thank you for the quick video and how-to. Much appreciated. Deleting the music/sound effects at the beginning would make it a even better.

I'm getting a '78 Ford F-150 that needs a little work, I got to replace a door panel and this will be a huge help.

Great video. thanks

simple and quick - thanks!

You’re awesome bro..!

Nice video man I couldn't remember how it went back in this video helped

Thanks my man your a champion saved my arse ❤️ from Melbourne Australia

Very useful 👍

I've looked at only about 20 videos and yours is the first one I found with a manual crank.

Thanks bro. Quick easy video.

Thank you brother...great video.

You saved my time and money

Cheers mate! Helped me out allot

Omg dude thanks for the heads up... Truly helped me out of course with my Focus 🙉🙉🙉🙌🙌🙌💯😎

Thank you, your vid saved me a lot of head scratching😊

Thanks man, very helpful 👌

You are my hero.

worked great, Thanks!

Super helpful👍🏼

You saved my day 🔥🌍

Great thanks for sharing!

Tq so much fast n easy...

Had a hard time w the pin but otherwise I git it! Thanks man awesome

Thank you sir!

nice.. I saw "the paper clip removal video" looked like it was going to be a hassle. 2 screw drivers is much easier thank you!

Thank you so much for information ❤❤❤

Great video

Thanks! You can also use a thin shirt and slide it under the base of the handle to pop the retaining ring off.

All this time,,,,and that's all there was to it,thanks you made it look and ,,it was that easy!

Great job

Thanks for such a nice video...

Thank you mate, i am off to give it a try! :)

Thanks a lot helpful and simple

Nice & easy. Mahalo.

I did as I watched and job been done, thank

Great video thanks

Thx bro hope i can work it as ez as you did.

Thank You So Much.... You Are Star🎉

Thanx man. That helped. 😊

Thank you for your time spent on this well done video.This was helpful

I used a hook tool and pried the door from the handle, worked great clip shot out tho had to loom forever for it. 2 flatheads prolly work too but the hook tool for me is the way to go it’s kind of shaped like a question mark ?

i appreciate im trying to replace the exterior door opener on my jeep compass

Thank you!!!

wicked, thanks

Thank you!

Thank you

Thanks!!

thank you mister

Make sure that when you're holding your window crank handle in your hand and it has to clip on it that you don't drop it because I dropped mine and it took me at least 45 minutes to figure out where that clip was and God I was livid! 😅 My window track was completely broken and I almost didn't notice that there was a bracket broken off of it and the bracket was broken and I still managed to fix the window only to drop the window crank and have the clip fly through the air and it was starting to look like a beautiful job of fixing my window is never going to be because of a 2 cent metal clip that I couldn't find so my window was never going to roll up and down well on my car none of the windows will be down except that one so I was almost didn't have any windows at all but now I can roll one down oh joy have a nice day

you saved my life

thanks boss!

Thank you bro.

Helpful great

Glad I looked for a video like this before beating off with a hammer.Will this be same for my 1987 mazda b 2000?

My 92 s10 handle not fully connected to roll down the window. It does work when I push on it.

Thank bro 😎

Thank you!! Save me some time

Thank you so much

Good looking

Thanks man

Thank u so much I was about to just brake it off u saves the way

Bro thank you so much. It helped me. I drive my friends box truck and that knob is so annoying after 17 hours

I used to have the actual tool for this. Hmmm. Wonder where that ever went. Thanks for the video.👍

thanks bro!

Since I am gonna order the tool on ebay, could you follow this up with how to do this with the tool. perhapsa link to the ebay tool would be awesome to.

Ty bro

Thanks. I was suffering my ass out.. this helped.

Wished I had seen this before I tried to force it out. Scratching the panel in the progress.

Thanks

Thank u my heart ❤️

Didn't have luck with the dual screwdrivers, instead used a flat head and a putty knife and it worked like a charm. Thanks for posting this as it gave the base concept for getting that damn handle off.

I have a 2005 Nissan Sentra 1.8L. I just bought for 500, It's a work vehicle. Anyways thing was pretty much undrivable. Replaced what needed to be replaced now it works and runs as it left the factory. Except one thing I can't get my passenger door to open. It's locked into place and I did however get it to open once by messing with the Crank window and fliiping the lock a dozen times, but then shut it forgetting that the door locks. How do I get this door open again. I can fix the lock after I get it open. I'm not breaking the door panel off in order to fix a simple lock... As told by another vehicle mechanic. Maybe a tool to slide into the window between the lock? Regardless I will get it open again. Tips would help accelerate things though.

How does one go about removing the bolt for the window crank mine snapped off

Going to give this a try! Hope it works and the window can go back up?!🙏

AWESOME thx

Thank you 😫😫 👌🏻👌🏻👌🏻👌🏻

The most helpful video I’ve watched in a long time thanks

Thanks hun

nice

Thank You!! You just saved me a big headache!! 🤙🏼

Yoooooooo!!!!👍👍👍👍👍. Soooo needed this. Just bought a manual handle to replace. Oooooooooooooh My Goooooodness saved Me a Possible Ton of 💰 🤑 Money!! New "Suby" 04/01/22!

You can also slip a shop towel behind the handle around the clip and turn the handle to get the clip off