Sadly none of the damn vids on this parts have that.

Thanks and Thanks for subscribing!

I just bought a 09 S as well. Putting in a new OEM clutch, and thinking about changing the timing belt before it gives any problems like they say it would. Mine has 68K on it.

here is the video i used to do mine kzfaq.info/get/bejne/aqyEiNSCs5O7pH0.html

Jets Mini how

This. The pipe with no rib and such short overlap with the hose will be a huge risk of blowing off under boost. Doing dodgy mods like this will only give you and the next owners something you have to fix correctly down the track. Would have been better blocking the smaller hose and keeping the plastic factory section, or get the right aluminium intercooler piping with beads on both ends.

I filled the inlet on the bulkhead with some expanding builders foam. Surprisingly it didn't make much difference to noise in the cabin. At least now there is no hole for smelly engine vapors and road pollution to come in.

Hey dude. Did you remove the remaining pipework going into the bulk head and if so did you blank off the hole ? Love the mods dude. Done my oil catch can last week Much respect from Scotland 👍

Jing Tolentino can you check exactly the size lol

Yeah it's normal to see the cabin filter. Kinda weird location but that's factory!

have you tried replacing the cabin filter? if your getting a burning/oil smell check your valve cover gasket, oil filler cap & make sure the turbo oil feed line isn't leaking oil as it could easily be oil dripping onto the exhaust 'burning' hence the smell.. in short check for oil leaks.. "welding an oil line onto the turbo.. wtf why would anyone do that......" you could also check underneath the car as apparently these cars suffer from power steering leaking from the high pressure line & the power steering pumps... not sure if later model mini's are effected as bad.. but it doesn't pay to check it out

I had the exact same thought. Any muffler shop would probably do it for free, or you can buy an expander at any auto parts store.

Hey man Thanks for watching the videos and your support! I really don't see why a set up like you describing wouldn't work honestly. any pictures of the configuration your thinking of going with?

not really bit there's some videos with r56 hks bov and well I see that as the only way

JPeezus ✔️️ yes sir that's right if your engine is consuming that much oil I would say it was about time for you to do I Walnut blasting on your valves they start to accumulate more and more sediment the worst they get

Bimmer Dude awesome i'll research that, thanks! I subbed (:

And put two oil catch cans to prevent it again.

Get rid of it

Oh man thats not good. I personally dont have any issues with hoses blowing off. If youll look back @ 9:25 youll see i scuffed up the pipping where the metal would meet the rubber. Also you could #1 create a bead of JB weld on the edge to give the rubber hose something to hang onto #2 old fashion trick is use hair spray on the edges of the pip to help it stick. Chances are have a fair amount of oil blow by passing through your intake track making thins slippery. Be sure to clean all surfaces before reinstalling. I may do a video soo on how to make sure your piping doesnt come off under load. GL!

just put some beading around the tube or get a purpose made pipe with beading already on.. this gives much les chance of the hose popping off underload

Use hair spray next time

had check if there was a selenoid ont the noise make and bypass it otherwise you didnt plug back everything right

Hey friend, seems to me like you made it work just fine :) You don't NEED a mini scanner to reset the adaptions. But it highly recommended to have one just incase you have problem down the road. its nearly impossibly to pinpoint the actual issue with a universal one. Thanks for leaving a comment and thanks for watching!

@@BimmerDude where do you get a mini scanner?

That is an excellent idea!

exactly what I just thought too

I wondered that also. Just a core plug plastic bung and some glue/tape.

Ditto

Because the T piece is bad for airflow... Gas response is way better without that. And every gram that you remove from the Car is performance! Weight reduction brooo!!!

i thought the same thing! just cork it and move on lol

actually yes it is decently not as obnoxiously loud when spooling since i have the Alta intake. you can still hear it though but now its just coming from outside of the car like a normal car. Yes I did notice change in throttle response after doing this. be sure to rest you dme adaptions though as the air flow will be slightly altered by the increase in diameter.

Bimmer Dude by unplugging the battery? From Pasadena TX man

Im not exactly sure ive never done it this way i actually have a bmw/mini code reader so it was a simple as a few clicks. Nice! man we're neighbors practically. get any flooding out there?

Bimmer Dude OK yeah I'm going to order a scan tool myself and yes man we did but gratefully not in my house or cars. I've been dealing with a maf code. I replaced it but still have the code popping up. I tried to reset it with a generic scanner but it would popped back up. Thanks man enjoy the videos

yea i wouldnt throw any more $ at the car until you get a Brand specific code reader. Those generic ones are too vague. if it could literally be expressing that the MAF is reading too lean etc and not an actual maf issue. GL

Put a Cap on the 'Noisemaker Pipe' and you are done!

Put a Cap on the 'Noisemaker Pipe' + Hole and you are done!

well i used an old trick.. the pipe is slightly oversized and I stole some of my wives hair spray >;)

Bimmer Dude 🤣😂 oh yes ive been there before with the hairspray.

you mean 1/4 inch or 7mm

Chang Hyun Kim wow Korea that's awesome didn't realize my videos we're being looked at there if I remember correctly it was just above 11 in I'd say 283mm or so. Thanks for watch !

Answers Thanks, my question is, do you want to cut the pipe length to 283mm?

Chang Hyun Kim yes sir

Never had that issue myself

@@BimmerDude You are lucky because there is almost no play between engine and chassis at that point. A simple line with the MIG at the ends of the tube would suffice and would be a better design in the long run. Had to do the same on mine in the turbo to intercooler muffler. It pops and leaks when making more than 1.8-2.0 bar

Nope never. I actually think that would be seriously fun though I have driven front wheel drive cars on roads like that though the MINI would be a blast I'm sure!

were you able to find this out? I've been researching and I haven't been able to get details if this lit up any error code.

Or at least a 1mm cutting disk

That's a really good ide actually 👌

I think I will do it this way. Any Idea where to get a plug or cap that size?

COPY: Pause @7:06 see the Old Little Maker Extension? Cap that off and UNPLUG your Noise Maker = DONE !!!

Equaliser funny story, this car has turbo muffler on one side, a noise maker on the other lol da fuq tbh

This means you have Un metered air (leak) some where . Check for tears in your hose even small ones. This video is quite old which means the hoses on your car have aged too

That just defeats the purpose of removing the noise maker in the first place. Just capping that outlet will still leave a pocket that air will push into and cause turbulence (you don't want that) what you do want is a smooth path for the air to move through. Because of the turbulence created by "capping" your not making anything better and might as well leave it as is.

@@christophersands6042 - Pause @7:06 see the Old Little Maker Extension? Cap that off and UNPLUG your Noise Maker = DONE !!!

I'm also wondering if capping the pipe that goes to the firewall would do the same thing, and thus remove possibility of the mods slipping or coming undone under pressure

@@gretre4560 I’ve had the cap on for 2 weeks now still no issues and no problems. Cap hasn’t even budged at all. The opening on the firewall I just took the old insert and trimmed and capped it.

@@maxboya Really? What did you use to cap each end?

@@maxboya Hi Max. Can you please tell me how you capped? Thank you!

Never leaked. Look how old the video is man lol. Who is still watching these in 2022?