Insane carbon fiber interior on a Budget.. Mustang, Charger, Challenger, Camaro, Vette, and More

No video

Insane carbon fiber interior on a Budget.. Mustang, Charger, Challenger, Camaro, Vette, and More

Рет қаралды 16,717

Күн бұрын

Here is a look at the newest addition to my brand new Ford Mustang GT. This is one of the best ways to give your interior an absolutely incredible look for a great price. These kits are also available for the Camaro, Corvette, Charger, Challenger, and many other models.
Here is a link to the Dyna Performance home page:
www.dynaperfor...
Instagram - #RacerXOfficial
/ racerxofficial
Don't forget to Like, Subscribe, and Share - RacerX
Shot on the IPhone XR
Thank you for your support on the channel

Пікірлер: 182

@monacoathlete2755 3 жыл бұрын

This changes the whole look of the interior. Looks really nice!

@RacerX9 3 жыл бұрын

I agree.. much appreciated

@One_Blue_6.2 3 жыл бұрын

Don't know if its the camera but it really doesn't look very good. It looks less like carbon fiber and more like stickers. I am sure some is lost in the camera but i prefer the full carbon replacement pieces over the overlays.

@XxTommyboy890Xx 3 жыл бұрын

Same they are definitely just a thin sticker which doesn’t look anything close to my real carbon pieces

@Bandit77TA 3 жыл бұрын

You did a really nice job. That seam on the dash would drive me nuts though. To bad it wasn't one piece.

@RacerX9 3 жыл бұрын

I think it would look good but putting on a piece that big would be a nightmare trying to keep aligned perfectly all the way across

@dougdeeds895 3 жыл бұрын

Let’s see those rims. Some of the carbon fiber looks great some of it looks like a sticker especially the center consul. But overall I can’t wait to see the rest of the build.

@RacerX9 3 жыл бұрын

Coming very soon

@darronchristopher9949 3 жыл бұрын

I like it. Adds some depth and contrast pop to the interior. It reminds me of the wood grain pieces that I put in my Yukon 12 years ago.

@SovereignKnight74 3 жыл бұрын

Drs. Always say to get more Fiber. They are definatly right. 🤣 Looks great Brother!

@RacerX9 3 жыл бұрын

Thanks buddy.. I think it looks great

@ocmotivator 3 жыл бұрын

Great video dude! Love the shirt too!!!! 👍👍👍👍👍👍👍

@RacerX9 3 жыл бұрын

Thanks buddy.. I know the guy that got me that shirt lol

@HC19200 3 жыл бұрын

Hey RacerX, I have been looking at these guys but have been sceptical about pulling the trigger. Something just rubbed me the wrong way about the setup. Thank you so much for making the video and providing a deeper look into the product.

@sergebasque8460 3 жыл бұрын

It is making the inside pop out cool.😎👏

@RichGT350r 3 жыл бұрын

It looks great. I have the factory carbon fiber dash on my car. I have seen someone that makes the whole panels and parts out of carbon fiber, but you have to actually change out the panels. They should have made the dash panel out of one piece to eliminate the seam in the dash! But it looks good and you don’t have to molest the interior panels! 👍🐍🐍🐍🐍🐍

@kennethtaper3592 3 жыл бұрын

Racer X you're raising the bar keep up the great work 💪

@jaybman2700 3 жыл бұрын

Great video, that’s pretty cool I’m gonna do some research I might get one of those kits for my hellcat, congratulations on 98,000, I’m excited for you to hit that 100,000 you’ll have to make a video when you get your plaque from KZfaq, You worked hard you deserve it!

@RacerX9 3 жыл бұрын

Thanks buddy.. I really appreciate the support

@tgilly83 3 жыл бұрын

Less is more for me.i personally would use less. But it looks great :)

@RacerX9 3 жыл бұрын

That’s certainly an option as well..

@gmac9987 3 жыл бұрын

One of the first things I did with my scat. As long as you take the time to do it right it goes on nicely. Looks great, man!!

@RacerX9 3 жыл бұрын

Agreed.. takes a little patience

@thehellraisinhellraiser3251 3 жыл бұрын

Looks much better my brother!

@jimgeorgeson6322 3 жыл бұрын

Looks great RacerX! It was one of the first mods I did to my 2020 Scat Pack Challenger and I love it as well. Really makes the interior of these vehicles pop! Well done!

@RacerX9 3 жыл бұрын

Glad your liking the kit Jim.. I think they really look great

@kozy_taco2164 3 жыл бұрын

Not to get personal, but where's the house you're normally at? I've been curious of this new location...

@FranciscoSosaLCBK 3 жыл бұрын

Looks good. Im glad the mustang build will continue.👍

@RacerX9 3 жыл бұрын

Me too buddy 🤜🔥

@porsche962lemans 3 жыл бұрын

My whole car is done in carbon from that business. Good stuff

@HistoriaOrbis74 4 ай бұрын

Looks very nice! Will you be adding the pieces for the steering wheel? My apologies, if you did say something about them.

@paulbare6371 3 жыл бұрын

Your mustang looks great

@RacerX9 3 жыл бұрын

Thanks buddy..

@somejackball 3 жыл бұрын

just finished my Charger with some carbon fiber, and red paddles, knobs n stuff. not too crazy, but enough to make it look a little nicer.. looks great man! 👍😎

@Slow-ek7xu 3 жыл бұрын

800$ for that is an amazing deal especially with plug and play . Im definitely copping my kit

@jrrogersstang4696 3 жыл бұрын

Looks great 🔥

@RacerX9 3 жыл бұрын

Thanks buddy

@biged2193 Жыл бұрын

the line on the Dash is criminal

@ardelld8465 3 жыл бұрын

Looks nice! You look like your having fun! Thank you for the video.

@RacerX9 3 жыл бұрын

Absolutely.. lots more to come

@ardelld8465 3 жыл бұрын

@@RacerX9 Thanks so much.

@mikepoint4983 3 жыл бұрын

What a MONSTER difference , it looks fantastic racer x . What a clean look . Cheers

@RacerX9 3 жыл бұрын

Thank you Mike

@garyfuller7851 3 жыл бұрын

Looks awesome!

@RacerX9 3 жыл бұрын

Thank you Gary

@robertlutgen7636 3 жыл бұрын

I like it! Truly the whole car is beautiful!

@mrblizzard5190 3 жыл бұрын

Haven't seen Mrs X lately, enjoy watching her races at the drag strip.

@sandybeach7009 3 жыл бұрын

His intro no longer includes the Scatpack, wedding ring is off and a new place to live. Looks like Mrs. X is maybe now Mrs. Ex but that's their business. He'll address it or not when he wants. Best wishes for both of them!

@TaysonPlaysGuitar 3 жыл бұрын

I've been wanting to do my interior in carbon fiber but couldn't justify the price of some of the kits I was looking at. This looks like a great option. Thanks for the video!

@RacerX9 3 жыл бұрын

For sure my friend

@jordonrussell1867 3 жыл бұрын

Love when you realize your wheels are in the shot and slowly fix the angle lol

@griffmark4267 3 жыл бұрын

Can't wait to see when it all comes together. Looks awesome.

@RacerX9 3 жыл бұрын

Thank you my friend

@chadpittman7826 3 жыл бұрын

Looks amazing buddy 👍

@RacerX9 3 жыл бұрын

Thank you Chad.. much appreciated

@jordancollins8763 3 жыл бұрын

You’re my second dad 😂 love watching the vids

@UR_AL_SHOOK_UP_21 3 жыл бұрын

Great video bro

@Dude-tb8ry 3 жыл бұрын

You should try making your Mustang as light as possible while still maintaining the street car appearance. Like some carbon fiber exterior pieces would be nice rather than completely gutting the inside of the car. I’m thinking of getting rid of my rear seats and getting some racing seats and some carbon fiber pieces from Anderson Composites!

@joemeister7438 3 жыл бұрын

Great job. That looks awesome

@markwilliams6378 3 жыл бұрын

Car's looks good blue 💙

@TruckerSaLer 3 жыл бұрын

It looks good X not like some of them knock off ones that you can tell are just stickers. That one looks like a factory carbon fiber option.

@RacerX9 3 жыл бұрын

Yes agreed.. its true carbon fiber.. feels really nice to the touch

@mac4life654 7 ай бұрын

Where did you the carbon fiber from as far as company loved the video found it by accident

@georgetalkachov6016 3 жыл бұрын

Very nice looking, do they have anything to cover the glove box? My 17 yr.old daughter scratched the glove box with zippers on her back pack. Thanks for the info. on the end!!

@tayweezy 3 жыл бұрын

Mustang gang

@WillGreenZilla 3 жыл бұрын

Need a small piece of cf or something on that little plastic triangle piece behind the side mirrors :D

@RacerX9 3 жыл бұрын

haha missed a spot lol

@autobez3132 3 жыл бұрын

Notification squad we in here # 🚗 🚘

@RacerX9 3 жыл бұрын

Glad you made it

@destinyrodriguez8216 3 жыл бұрын

Wow it looks great! I love how it turned out 🤩

@RacerX9 3 жыл бұрын

Thank you Destiny

@ericf.9558 3 жыл бұрын

Can you build from the bottom up for us little guys lol. I'd love to see how the mustnag performance improves with just and e85 tune and then with headers and then just keep building. Especially if you did dragy vids with each upgrade.

@soulja4187 3 жыл бұрын

Hey brother thank you so much for the ideas.!

@paulhudgins5120 3 жыл бұрын

Wow that looks amazing, you have to love that carbon fiber look, the fitment looks great. Now you have your own Racer Red X super carbon fiber performance pack. She is getting some sweet upgrades.

@RacerX9 3 жыл бұрын

Haha for sure.. lots of good stuff coming

@mikeholmed7029 Жыл бұрын

How has this held up over the last yr?

@mrhyde0705 3 жыл бұрын

I had a kit on my charger. Didnt like how raised it was so i removed it. Now im replacing EVERY piece it came in contqct with. Lol

@Seattle-Superchargers 3 жыл бұрын

Big time look brother. Following you on IG now, keep the content going!

@728GT 3 жыл бұрын

That's an impressive kit.

@RacerX9 3 жыл бұрын

For sure brother

@erikfritts8240 3 жыл бұрын

Nice gonna have to check out their stuff

@piccolo398 3 жыл бұрын

Not a fan a of stickers kinda ruins the point bc it’s adding weight. Can’t seem to find actual replacement panels which id love to do.

@RacerX9 3 жыл бұрын

The weight of the entire kit is less than 2 pounds .. It really adds no weight at all

@piccolo398 3 жыл бұрын

I mean yeah I get 2 lbs isn’t a lot buttttt if I’m spending money on real carbon fiber I want panel replacements instead of just covering up the cheap plastic panels. Anytime you search for it you just get the stick on stuff. Feel like there is a huge market if someone could actually provide that.

@bryanalonso6184 3 жыл бұрын

Id rather pull the parts and actually skin them with cf because in the long run its just looks so good and the cf really meshes with the parts

@bekkiware264 3 жыл бұрын

Looks great and I'm sure it will stay cleaner and will make detailing quicker.

@RacerX9 3 жыл бұрын

Thanks Bekki.. Yes it wipes clean really easily.. not a bad deal at all

@DefinitelyNotYouThankGod 3 жыл бұрын

Look sweet! Was it expensive? Also where’s the Scat Pack??

@RacerX9 3 жыл бұрын

Price on the kit is really manageable .. I actually sold it several months ago

@haste953 3 жыл бұрын

@@RacerX9 Wait did you sell the ScatPack?

@toddsmith5552 3 жыл бұрын

How about a video on what happened to the scat pack

@toddsmith5552 3 жыл бұрын

@@XxTommyboy890Xx I’ve seen videos about selling the charger. I guess I missed the ones on selling the challenger

@XxTommyboy890Xx 3 жыл бұрын

@@toddsmith5552 my mistake I’m an ass I was thinking the hellcat for whatever reason not the challenger. I don’t want to talk out of turn but he’s also not filming at his house or wearing his wedding band hope he’s doing alright.

@davestewart9146 3 жыл бұрын

I love carbon fiber, your car looks amazing 👍😁

@RacerX9 3 жыл бұрын

Thank you Dave

@Chillax11 3 жыл бұрын

Looks great! I think I might get some for my charger!

@RacerX9 3 жыл бұрын

Yes the kit looks awesome

@elroycooley398 3 жыл бұрын

I'm doing the same thing to my sentra but I went with wood grain

@bigheavy12 3 жыл бұрын

Great video!!!!

@jabcmw1 3 жыл бұрын

Fantastic!

@RacerX9 3 жыл бұрын

I really like how it came out

@roymorgan5498 3 жыл бұрын

Stang looking very good 👍🏻

@RacerX9 3 жыл бұрын

Thanks buddy

@simplyprism5854 3 жыл бұрын

Looks great! Thinking about getting it for my Challenger, I went with the Amazon version and it’s just plastic covers, kinda regretting that lol

@RacerX9 3 жыл бұрын

This kit looks great when it’s all done

@houstoncowdog 3 жыл бұрын

Did you move recently? Looks like your filming at an apartment complex now.

@xXMr.WiGGleZzXx 3 жыл бұрын

No ring on the finger anymore😔

@RacerX9 3 жыл бұрын

I'm just keeping thing about the rides brother

@xXMr.WiGGleZzXx 3 жыл бұрын

@@RacerX9 we all support you no matter what brotha. Nothing but well wishes. Keep up the good work.

@selaphiel2854 2 жыл бұрын

does the gear shift panel is lifting after a couple of weeks? i did mine with adhesion promoter still some of the edge of it is lifting up

@aed090325 3 жыл бұрын

@RacerX Hey man! Great look on the Mustang. Thinking about purchasing a red GT soon. Also did you sell sell the scat pack?

@RacerX9 3 жыл бұрын

Thanks buddy.. yes I did..

@Mohammedichigo 3 жыл бұрын

What happens when you peel it off the applied surface does it damage the car?

@RacerX9 3 жыл бұрын

No it doesn't damage the car

@ronnieowenssr.1419 3 жыл бұрын

Looks great but you look better in the challenger a lot of mustangs out there not putting it down I wish the best brother did your wife get the challenger I loved it

@dgmlxcbl 3 жыл бұрын

Came for Paul gilbert stayed for the car.

@GettingthruLife 3 жыл бұрын

I bet the hot and cold is going to play havoc on that adhesive backing.

@RacerX9 3 жыл бұрын

We will have to wait and see how it stands up..

@LiveLifeWithAView 3 жыл бұрын

Looking slick sir! LLWAV!!

@RacerX9 3 жыл бұрын

Much appreciated my friend

@bobbyvegas666 3 жыл бұрын

Looks siiiic

@keiththarpe8291 3 жыл бұрын

2.0 is looking great X! The interior looks very nice already. I'm curious about the steering wheel you may choose and also can't wait to see the rims. So glad you are here for another awesome project 🖤🦇🖤

@RacerX9 3 жыл бұрын

Thank you Keith.. looking forward to continuing the build on this beast

@keiththarpe8291 3 жыл бұрын

@@RacerX9 me too hoss, it definitely will be a beast

@Sketchy_Ion. 3 жыл бұрын

Right about now wishing i had went with Dyna i went with wolfzacarbon and ive been waiting over a month and they still haven’t shipped out, anyone recall how long they waited on dyna? Might have to cancel order and go for dyna

@no_lft_shft 3 жыл бұрын

Is it like a soft rubber or hard plastic feel to it?

@ShelbyPassion 3 жыл бұрын

Looks good but I still love my trufiber lol

@Edsrt- 3 жыл бұрын

👍👍👍

@akspeed4968 3 жыл бұрын

Hopefully everything holds up in the heat.

@RacerX9 3 жыл бұрын

Me too buddy

@NikolaiHT 3 жыл бұрын

You sold the scatpack? Why? Greetings, my friend.

@donponder4757 3 жыл бұрын

@RACERX, WHY AREANT YOU FILMING AT YOUR HOUSE?

@RacerX9 3 жыл бұрын

The house market is insane.. selling the house. Will get another one when time dictates

@donponder4757 3 жыл бұрын

@@RacerX9 YES SIR IT IS. IM LOOKING MYSELF. CAN GET GOOD MONEY WITH MINE. BUT NEED A NEW HOUSE WITH LAND TO STORE CARS AND TOYS.

@ChaosinFallout 3 жыл бұрын

i would nt be worried about the product being sun proof but more worried about how the adhesive will hold up in the texas heat.

@RacerX9 3 жыл бұрын

Were going to find out.. hopefully it will hold up well

@Looking4TravelingWelderJob 3 жыл бұрын

U should do something absolutely untraditional. Get a police style push bumper for ur car. Look into it. It'll clear traffic for u and it could protect ur car. But most importantly it looks mean as hell. And it's made of aluminum. So it doesn't weigh much.

@craigpeterson3525 3 жыл бұрын

Are you doing anything with the shaker scat pack

@RacerX9 3 жыл бұрын

I sold the car several months ago

@craigpeterson3525 3 жыл бұрын

@@RacerX9 bummer

@brucedallman1976 3 жыл бұрын

2nd isn't bad either!

@RacerX9 3 жыл бұрын

Who does number 2 work for lol

@brucedallman1976 3 жыл бұрын

@@RacerX9 you are absolutely amazing for this one, sir! I really enjoy your videos. You should throw some of this kind of humor into them every once in a while for a little razzle-dazzle!

@tedll75 3 жыл бұрын

I have one question for you. What interior is easier to clean, the Mustang, the Charger or the Challenger?

@PILULE-ow9sk 3 жыл бұрын

Challenger, then charger is a bit harder (only the center console changes) camaro is average and mustang is the harder with all the switches

@m1a1abrams3 3 жыл бұрын

where my base model v6 bois at

@CannondaleF700 3 жыл бұрын

No Mopar no car 😭

@RacerX9 3 жыл бұрын

Thanks

@CannondaleF700 3 жыл бұрын

@@RacerX9 please buy something MOPAR. it's not too late to change.

@Justtwodangmany 3 жыл бұрын

Im disappointed that the Welds arent already on your PhoenX 2.0 'stang.

@RacerX9 3 жыл бұрын

I'm keeping those for racing.. new wheels are going on today

@Justtwodangmany 3 жыл бұрын

@@RacerX9 Is everything else okay bud ?

@RacerX9 3 жыл бұрын

Things are good brother.. no worries

@insanelywicked873 3 жыл бұрын

Lol for a 2010 Charger the only option is the full kit for $812.

@XxTommyboy890Xx 3 жыл бұрын

The weave patterns for a Subaru don’t go in the same direction which put me off from their products :(.

@RacerX9 3 жыл бұрын

Strange.. thats something maybe they can look into

@XxTommyboy890Xx 3 жыл бұрын

@@RacerX9 I should reach out to them I do like the look of it a lot just from one panel to the next on the radio trim the weave goes a different direction

@bigjoe322 3 жыл бұрын

I would put in some LED ambient lighting in to maybe red or white

@brillowolf 3 жыл бұрын

Also known as the High School mod 🤣

@RacerX9 3 жыл бұрын

I suppose my 64mm hellion twin turbo kit .. big axles.. driveshaft .. suspension upgrades.. fuel system .. seats.. wheels..ect.. are also high schoolish .. i'm such a child