Racing drone made faster and stronger with Redbull engineering

Рет қаралды 5,482

16 күн бұрын

DinDrones OZR is a racing drone frame that was designed by Redbull Air Race engineer Ben Freelove in collaboration and piloted by Din. Great to see air craft level engineering finally trickle down to drone racing, and the unique features are pretty compelling.
DinDrones OZR
- dindrones.com/products/dindro...
- bit.ly/3VLdykQ
Battery Box - bit.ly/3L6TUuJ
Taka's super light builds using OZR - / taka_fpv_
Battery Protectors -
- Din protection - bit.ly/4ckTb52
- Lipo Coffin - github.com/OpenRacer/OpenRace...
#dindrones #fpv #droneracing
join the FPV Sales Alerts FB Group: / 425554224924945
Support the Channel using these links
RacedayQuads - bit.ly/3PDd7FQ
GetFPV - bit.ly/3FFAAkX
Amazon - amzn.to/3PeQvf0
Five33 - bit.ly/3HKPB7O
NewBeeDrone - bit.ly/3HOZtNV
FPV Cycle - bit.ly/3hyHtfZ
Catalyst Machineworks - bit.ly/3WplI15
International
Airblade - bit.ly/2E6qtbU
Banggood - www.banggood.com/custlink/33K...
Join my Patreon - / jone5fpv
My Perfect Racing and Freestyle build parts list
docs.google.com/document/d/1a...
Most or all links above are affiliate links, and I will receive compensation if you use them.
music by -
Aorta Project - / @aortaprojectvevo8240
Lakey Inspired - / @lakeyinspired

Пікірлер: 66

@taka_fpv 13 күн бұрын

Wow! I am honored to have my build featured on your channel!

@JonE5FPV 13 күн бұрын

Nice work! Thank you for reminder, i added your instagram to the description so people can see more of your great, ultralight builds. Fantastic job.

@SwampdogFPV-tx7ge 13 күн бұрын

If you look up the definition of Sh*t pilot in the dictionary you will see my picture. I built two of these quads, loaded up the presets for HDZero, ELRS, and the OZR tune and was absolutely blown away by how well this quad handles. No quad is able to compensate for my dismal lack of race skills, but this quad upped my racing enjoyment factor by making it easier to do more laps, faster. I'm ready to pull the trigger on another frame to have three race rigs ready to go.

@malikmarez1407 12 күн бұрын

What were you running before?

@JonE5FPV 11 күн бұрын

Yep. We in the same boat. Can’t wait to compete with this setup

@SwampdogFPV-tx7ge 9 күн бұрын

@@malikmarez1407 Floss 3 so I was really ready for a change!

@captainvanover 7 күн бұрын

Might have to get one!

@JonE5FPV 6 күн бұрын

Shows up to the big race. “Somebody hand me a quad…”

@Tw1dg1t 14 күн бұрын

Great video! Ben and Din have been cooking up some really cool stuff.

@MCsCreations 14 күн бұрын

Awesome frame indeed, Jon! Looks great, and as lighter, the better! 😃 Stay safe there with your family! 🖖😊

@JonE5FPV 8 күн бұрын

thanks so much MC!

@genjitsu7448 13 күн бұрын

I was a fan of the Open racer when you introduced it to us a while back - I have to say that this does look like a very smart and logical evolution of that frame. Would like to check one of these out and will most likely do it on my next build. Cheers

@JonE5FPV 11 күн бұрын

Thanks a lot. Yes OpenRacer is special for sure. I think it helped me progress the most when I could focus on pushing and not worry as much about fixing something every other crash.

@CaptainCrowFPV 14 күн бұрын

Nice video dude IO was so fun 😎

@baggszilla 14 күн бұрын

Wow what a Kool frame! Thanks JonE5!

@JonE5FPV 11 күн бұрын

Thanks Bobby B. I’ll be putting it to the test for sure.

@jacksonwazny 14 күн бұрын

Looks tuff!

@winder6 14 күн бұрын

Excellent review video. I just built my first open racer last night. I have one old five33 classic switch back as well. It's great to see innovation in frame design for racing. Love the flight videos

@JonE5FPV 13 күн бұрын

OpenRacer is/was such a game changer for me. Finally allowed me to fly as fast and as hard as i want without constant worry for broken components/hours on bench fixing. I think it is for sure one of the top 3 things that helped me to progress. Building another today actually to test a new stack.

@winder6 13 күн бұрын

@JonE5FPV yeo I'm excited to fly the one 1

@winder6 13 күн бұрын

@JonE5FPV ya I'm excited to fly the open racer. I was bummed that five33 stopped supporting the Swichback classic it's a tough frame I've crashed it into tree trunks with no damage. I like the fact that the open racer will hopefully be available for a long time. I hate being forced to upgrade. Been following your channel a long time I remember when you proposed to your wife with your drone your pioleting skills have come a long way and I remember you saying guys stop siming so much. LOL. and now I'm always like at least 10 seconds slower than you, so please stop getting faster. Ha ha.

@ones_flow5652 12 күн бұрын

Really great stuff, dudes! - A big shoutout to Ben Freelove, for his wisdom and in front of all his name! May the kinky times never end! ;-)

@JonE5FPV 11 күн бұрын

lol what a comment!

@hescalante6081 13 күн бұрын

Very kool. Loved the presentation. Looks like a breakthrough for durability and light weight. Maybe a game changer?

@MagicMaik123 13 күн бұрын

Thanks for sharing your thoughts - Nice frame. Still missing a light weight frame with DJI O3 naked. Recommendations are welcome. My Idea is to convert the Recursion Helios 3.5 to a TBS Podracer for a light and quite setup with O3.

@JonE5FPV 11 күн бұрын

It’s not light. But I love my DJI o3 OpenRacer. Racing quad precision and weight with hd recording

@mikediggsv2 13 күн бұрын

Floss baby

@JonE5FPV 11 күн бұрын

Man I remember flying floss v1 (first racing build ever), v2, v3. Great times.

@genericfpv 14 күн бұрын

nice! like flying at end as well. this may be my first race build, do you know what the print is for the antenna at 2:43 please or something simular? thanks

@JonE5FPV 14 күн бұрын

They have a full list of prints here, the one in that picture is the size L antenna mount i printed on my bambu makerworld.com/en/models/435720#profileId-344115

@tehllama42 13 күн бұрын

I'm still out here running way jankier stuff than Jon - but yeah, what a rad frame. I'd still want to build one of these slightly chonkier with longer arms for the back, but this is definitely something I want to try out.

@JonE5FPV 11 күн бұрын

True. Maybe they make some hybrid arms for that clean air feeling. Although with the tune, it feels just as smooth to me.

@tehllama42 11 күн бұрын

@@JonE5FPV to be honest I've stopped caring about that I actually run at race pace

@ChrisGripeos 13 күн бұрын

Carbon fiber braces are pretty light, but when hit all that force goes right to your electronics (I assume). I wonder if the braces were made of nylon or polycarbonate, would it make the race quad both strong and force absorbing to protect the electronics (at the expense of a little more weight)?

@din_fpv 13 күн бұрын

the main purpose of the brace in this build is to add arm stiffness, so they dont flex under load (heavy corenring etc.) and dont introduce any new noise to the gyro. If you 3d print a brace, you'd need to make it thicker and wider to get that stiffness, and it will be not 2-3g per brace but 8-10g which kills the purpose of a lightweight build. My whole point is - main goal of the brace is not protection. But ofc you can sandwich two together haha

@JonE5FPV 11 күн бұрын

The printed stuff is very strong when thick as Din mentioned but then would be heavy. The pod itself add a lot of protection. The brace adds some buy not as much as say an OpenRacer brace that is 5mm (ozr braces are 2 or 3mm I believe). But I ended up not running braces on OpenRacer anymore since so heavy. So lightweight brace you actually run ends up better than heavy brace you leave off.

@DigitalCruzer 13 күн бұрын

Is there a downloadable file for the canopy/pod?

@JonE5FPV 11 күн бұрын

Yes. If you go to Din drones store and click on pod to buy, there is link to all three STL (including the pod )

@oscillationandy6923 7 күн бұрын

Why do you still have the Catalysts Machineworks link on there? lol

@JonE5FPV 7 күн бұрын

Because I’m lazy and set that link list to default and haven’t looked at it in 3-4 years lol. Thanks for the heads up. Gonna go fix it now

@oscillationandy6923 7 күн бұрын

@@JonE5FPV I miss CMW... Love those frames.

@NETCODEFAIL 13 күн бұрын

no stl file for pod ?

@JonE5FPV 13 күн бұрын

pod STL is available here if you are setup to print CF Nylon makerworld.com/en/models/435720#profileId-344115

@MarcBergenthal007 13 күн бұрын

You mentioned that you apply the karate tune on your other drones. I think you mentioned on discord ones that you also apply a filter tune for noisy drames/builds on top. Do you still do that? Also bash my quads a lot and don't want to change props every time. 😅 Karate is nice but can get a bit hot, even without the spicy setting.

@JonE5FPV 11 күн бұрын

I do always choose the noisy airframe option due to my penchant for running nasty props. But I think they removed that option around 4.2 and now my motors hotter than the sun. But this tune. They landed Luke warm to cool

@MarcBergenthal007 10 күн бұрын

@@JonE5FPV Thanks for your response. Just checked BF configurator and these presets are also available under 4.5. (Noisy and Very Noise Build, with and without RPM Filtering). So you would apply the Karate Tune (without spicy) and then add noisy with RPM filtering in a second step? If correct, I would give that a try and see how it feels. 🙂

@DavidHanniganJr 14 күн бұрын

No chance to get a stretched-x version of this, huh?

@JonE5FPV 14 күн бұрын

Not currently, but perhaps Din or the team could be persuaded if its a popular request.

@DavidHanniganJr 14 күн бұрын

@@JonE5FPV is there somewhere that my two cents can be put in that will actually get to the people that it needs to? Do you know?

@din_fpv 14 күн бұрын

@@DavidHanniganJr i've seen it David, thats good enough haha

@DavidHanniganJr 14 күн бұрын

@din_fpv Ok den! Good deal. Thanx.

@tehllama42 13 күн бұрын

@@din_fpv I'm just over here wondering if 6" arms would do enough - just being able to run hybrid-X with long rears can do a lot for getting that 'stretch-X feel', and also open things up for using these as dual-sport chase rigs with a comically light setup

@notsure1502 14 күн бұрын

First!

@JonE5FPV 14 күн бұрын

fast on those clicks!

@xgoodvibesx 12 күн бұрын

Do NOT use aluminium screws for motors. A set of titanium will set you back half the price of a motor, and I promise you you're going to lose a motor unnecessarily if you go with aluminium

@JonE5FPV 12 күн бұрын

Good notes. I’ve never tried it before but seen others doing it. Do they just sheer on crashes? I’ll get some Titanium ordered.

@din_fpv 10 күн бұрын

prob bad experience with china aluminum. if you get it US sourced, its real 7075 T6. i stopped ordering "kits" from cnc vendors and make them myself just because of that reason. JonE5, one of the aspects i should have highlighted earlier - hardware i include with OZRs and Typhons is just next level

@hescalante6081 13 күн бұрын

Very kool. Loved the presentation. Looks like a breakthrough for durability and light weight. Maybe a game changer?