Racing the B6.4 and the RB10 on the track.
Рет қаралды 21,734
Жыл бұрынWhat is the best Team associated buggy for you ?
We take these 2 amazing 1/10 scale 2WD buggies racing at Sough Electric Model Car Club.
RTR come with Reedy electrics installed - reedy sec and brushless motor combo.
Where as the pro kit will be installed with Corally electrics. Rs160 and and super fast 8.5 turn brushless motor.
RB10 Ready-To-Run
The RB10 will perform on most surfaces you throw it at, from asphalt to dirt as well as any prepared track surfaces. This buggy makes for a great basher and a good platform to try your skills out on the track.
1:10 scale 2WD off road buggy racing--the pinnacle of RC car racing. Since the introduction of the RC10 in 1984, the Team Associated RC10 buggy platform has won 13 of the 18 I.F.M.A.R. World Championships contested since the class began. You now have the chance to drive a buggy derived from this race-winning heritage with the beginner-friendly, yet capable and powerful RB10.
Featuring a water-resistant, high-power Reedy brushless speed control, 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as our DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a High-torque digital metal gear servo, and a water-resistant enclosed receiver box. All of this packaged together in an outstanding factory-finished off-road buggy body with wing.
The awesome Team Associated RC10 B6.4 2wd Buggy is now ready for some close indoor carpet battles this year
www.cmldistribution.co.uk/pro...
NEW FEATURES
New 13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
New +3mm length aluminum chassis with 22.5 degree kick-up to complement updated front-end geometry and with new shape to reduce chassis scrub with the track surface
20deg., 22.5deg., and 25deg. molded bulkheads included for a complete range of caster and kickup options
New adjustable height steering bellcrank and rack system for optimized bumpsteer at all ride heights and caster angles
New -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
New steel RC10B6.4 ESC mounting tray shifted forward in the chassis and with a wider footprint to fit electronics, resulting in a further forward weight bias
New front ballstud mount, top plate, and front wing mount to account for the kickup angle change
New chassis side rails with 3 optional fan mount locations to choose from depending on chassis length and transmission used
New cab-forward design RC10B6.4 bodyshell offered in standard (kit) and lightweight (optional) thickness
Front and rear anti-roll bars included
4mm carbon fiber front and rear shock towers with molded protective covers.
Get your build tools from www.corally.com
@2bobbillionaire306 Жыл бұрын
Great job boys. One thing that nobody else talks about racing is the fact that when you're new, you're absolutely craping yourself on the podium. Everything is terrifying and can be overwhelming to a new starter. So nice to see clubs out there that are welcoming and supportive, especially as so many clubs take it way too seriously and it can take the shine off it.
@PopalongRC Жыл бұрын
Cheers Bob hopefully we are making it easier for people to get into racing
@2bobbillionaire306 Жыл бұрын
@@PopalongRC Absolutely. Maybe a little less daunting for some to try racing and also letting everyone know that we were all beginners once. The nicest take away from this is seeing just how much enjoyment can be had from a good quality RTR car. We all love the high end kit but it absolutely ups the stress levels at the track as there is just so much to think about. There's alot to be said for just fitting the control tyre at your club, turning up and having a drive around. Thanks again for sharing :)
@PopalongRC Жыл бұрын
Cheers Bob. I know there is more in the car as well so hope I will do better next time with the RB10
@robbietabobby Жыл бұрын
Fully agree
@andrewchong1154 11 ай бұрын
This is so real! I got really into nitro 1/8 buggy when I was in my late teens. I quit because it was too cut throat and I wasn't having fun because of it. Now, in my 30's, my dad and I are getting back into RC because we found a local club that was incredibly welcoming. Allowed us to run our mod motors, turned down, in novice class until we got our 21.5's. We're having a blast doing it together and enjoy exposing my son to the track. He's only 2 and is out there marshaling for papa and dad on practice days. The track does a lot for STEM camps and stuff, has a great novice class and rental program, everyone has been inviting and helpful... it's just SOOOOO different than my solo experience in 1/8 scale nitro at 18 years old.
@belt1974123 Ай бұрын
Need to put a shorty pack all the way forward in the RB10 for carpet for sure. Some weight in the front would probably help too.
@Pshady 10 ай бұрын
Came here to find out about the RB10 but instead found out how amazing that club is.
@PopalongRC 10 ай бұрын
Looking forward to going back this winter
@Synic08 3 ай бұрын
…carrying it like a beginner in the original box… made me laugh cause its 110% true… lol
@dirtrider88 Жыл бұрын
5:52 that was amazing.
@PopalongRC Жыл бұрын
Cheers dirt rider
@murder_wagon Жыл бұрын
Great seeing some offroad buggy racing. Cars looking good. But always room for improvement. Can't wait for the next
@PopalongRC Жыл бұрын
Cheers Wagon … move action coming soon
@skipjoyner5815 11 ай бұрын
Thanks guys. I've been looking at both kits so this is perfect. Just like to see them on clay!
@PopalongRC 11 ай бұрын
No clay over here due to probability of rain
@barrycheesemore2928 Жыл бұрын
Damn, that looked like so much fun!! I'm so tempted....
@PopalongRC Жыл бұрын
We had a blast Just the beginning of the journey Stay tuned
@wns_RC_racing Жыл бұрын
Whaaw racing with Lee Martin!
@PopalongRC Жыл бұрын
Not in the same race but in the same event … still pretty cool
@colestaples2010 Жыл бұрын
Great job on that b6 body
@PopalongRC Жыл бұрын
Cheers Cole
@MrTevans011 Жыл бұрын
Can't wait to see what comes next, be interesting to see how the RB10 does with a pinion change!
@PopalongRC Жыл бұрын
I am looking into it for the next outing
@jm4472 4 ай бұрын
23 pinion 87 spur. Fast!
@azcerbic Жыл бұрын
great vid. 👍 to the club. The fast/sponsored guys here are switching to full slick rears for indoor carpet. Rotates the car quicker in turns w/throttle. Like Racing Karts when young. Everyone has their own setup though.....nice to see a mutual vid again. Serious cojones bringing a rtr box to a meet!
@PopalongRC Жыл бұрын
I heard of drivers switching to slicks might have to look into it
@paulchambers895 Жыл бұрын
Awesome journey turn your shocks upside down It might surprise you Thank you for your hardwork. And video's
@PopalongRC Жыл бұрын
Cheers Paul Think JQ has debunked that one
@johnboyrichy5452 Жыл бұрын
Cracking vid, I had my first off road race at the weekend with my b6.4 haven’t raced in 30 years had no run time at all, was setting my trims in the first heat, managed 4th in the B final, was very pleased with how it ran.
@PopalongRC Жыл бұрын
It is a great car
@bluegroovemodelsports9650 Жыл бұрын
Advice. One tip I do . Make labels for batterey sides. One saying "CHARGED" one "EMPTY" place the batterey in your case with side sticking up that shows status...
@PopalongRC Жыл бұрын
Yeah it was a numpty moment
@Wild_Buggy Жыл бұрын
Great content, thank you!
@PopalongRC Жыл бұрын
Cheers wild Thanks for watching
@VestedUTuber 5 ай бұрын
I'll say this - you should try putting these two cars on an actual dirt track, as they are, and see what happens. I bet you the RB10 will actually be slightly faster. Reason being that the box setup for the RB10 is a bit less focused specifically for the high-traction carpet, turf and sealed clay surfaces typically favored for 1/10th scale racing and a bit more focused on being able to run on a wide variety of surfaces, including rough, blown-out dirt tracks, whereas a carpet-tuned B6.4 is going to get bounced and tossed around on anything not perfectly smooth.
@PopalongRC 5 ай бұрын
This needs to happen
@JoevsRc Жыл бұрын
Love the video! I hope I get a chance to see both cars with the same ESC and motor. For a real comparison.
@PopalongRC Жыл бұрын
Don’t know about identical esc and motor but I definitely think a quicker set up in the RB10 would be interesting
@johnnyhaberfield721 Жыл бұрын
Loving it.✌️
@PopalongRC Жыл бұрын
Cheers Johnny
@paulrobinson9355 Жыл бұрын
Great video! Really enjoying these - awesome content!! 👍👍
@PopalongRC Жыл бұрын
Cheers Paul … thanks for watching
@rcfools Жыл бұрын
Another great video fellas. Keep up the good work.
@PopalongRC Жыл бұрын
Cheers Fool Thanks for watching
@bluegroovemodelsports9650 Жыл бұрын
Very nice video. Great job. Looks like loads of fun. Very nice facility.
@PopalongRC Жыл бұрын
Cheers Blue It was a great place to race .
@swampysteve2765 Жыл бұрын
My first race this weekend with RB10 hoping not to come last, but you have to start somewhere 👌
@PopalongRC Жыл бұрын
Slow is fast … try and keep it clean
@philipgreensmith1694 Жыл бұрын
Great video boys 👍 Nice it a bit longer. Thanks 👌
@PopalongRC Жыл бұрын
Cheers Philip
@je2916 10 ай бұрын
I'm getting the red one!
@PopalongRC 10 ай бұрын
Red makes you go faster
@JFlyer1973 Жыл бұрын
Loved this vid! The vlog style racing vids are my fav and being able to see it from a beginner’s perspective is gold! That’s me! Liked for this vid after catching your race with Kev and the others. Interested in the RTR concept but honestly, I’d just do an older used b6 model pro kit build car. Those RTR’s, while great for what they are… just not the race bred beasts like the pro kit cars. This helped me to make that decision. Great stuff mates!!! So glad I found yas!!! 😊
@PopalongRC Жыл бұрын
Glad you like the Vlog style we have loads of it on the channel .. especially our iconic and revival content
@VestedUTuber 5 ай бұрын
I'm going to say this - if you think RTRs can't be competitive racers out of the box, look at the ones made by Serpent.
@PopalongRC 5 ай бұрын
@VestedUTuber fair point
@madsrcbuggy Жыл бұрын
This was really inspiring to watch! I want to start driving on a track also at some point, so there was a lot of useful info in there for me, thanks for sharing your experience!
@PopalongRC Жыл бұрын
Thanks for feedback … plenty more to see from this project
@mad-beerc3818 Жыл бұрын
I would love to go there with my tamiya BHM Wild One! Iol it would win the coolest looking buggy hands down! Great vid and interesting to see how you both did with two different class buggies! C final winner is a great result as a rookie mate! But will say l prefer the good old days of racing! Way too serious for me! I raced back in the day with my Boomerang and its Demon motor and Parma shell and it was way more relaxing and cheaper then those expensive crazy fast rockets! I did ok too l won some trophies😉 But then nothing beats the golden era of RC! Great stuff guys!
@PopalongRC Жыл бұрын
Cheers Mad Bee Happy with both cars RB10 did amazing considering just how much slower the motor combination was. As for the B6.4 what a machine. Such a pleasure to drive, not bad for its first outing so looking forward to this journey we have a lot to do
@mad-beerc3818 Жыл бұрын
@@PopalongRC 😉👍
@dalejohn3233 8 ай бұрын
I really want to go racing now. Just need a competitive car 1st.
@PopalongRC 8 ай бұрын
I can recommend the b6.4 but also the Schumacher LD3 is hot of the press
@fab_cab Жыл бұрын
I got the rb10 as first timer. I love it. Im not a good driver. It can take a beating. Wow can it take a beating! I changed the gearing and it flys!!
@PopalongRC Жыл бұрын
What gearing did you run with stock motor.
@fab_cab Жыл бұрын
@@PopalongRC 28 pinion 75 spur. Motor only got hot in the hot sun. Other days was fine.
@mrdixon3765 Жыл бұрын
That looked a lot of fun. For another cost effective buggy have you guys checked out stuff from LC Racing. Good quality parts, and the parts are cheap. They're popular for Racing in Asia. DMS Racing for UK stock or Ali express. Wltoys copy some of their cars but with lower grade materials.
@PopalongRC Жыл бұрын
Good to know We will see what is about
@Marco_Vulpine Жыл бұрын
Love the little bit of rock music there guys! 🤟Buggies do look great fun and the running commentary is great. Good luck dialing those new rigs in. Couple of questions about the track? Why do they have carboard on one corner? Also, I have some old hose pipe myself, what do those guys fill their hose pipes with (Fnar Fnar)? Gravel? Sherbert? Unicorn Tears?
@PopalongRC Жыл бұрын
Pipes full of sand MDF on floor is slippy to drive on so it changes how you drive that section
@Luke-en2tk Жыл бұрын
For a class that is so big I can't believe there are no mid motor budget options available anymore, there used to be Durango, Absima and Team C 🤷🎁
@PopalongRC Жыл бұрын
True I’m sure someone is thinking about it … RB10 did ok considering
@Luke-en2tk Жыл бұрын
@@PopalongRC from speaking to one of the main UK suppliers the lack of non race kits is down to QC in China. That's why we have rollers being produced as they know the car is at least complete and not missing any parts. My take would be to manufacture somewhere else like Taiwan as Hobao, Traxxas and Awesomatix do, cost is a little more but then so is the quality and the QC. Tamiya has most there manufacturing done in the Phillipines
@malcolmbunny Жыл бұрын
Hi, thanks for the enjoyable video. Can you or anybody else out there tell me why most wings on racing buggies are not painted?
@PopalongRC Жыл бұрын
Oooooow great question Additional weigh maybe
@kevingildea4102 Жыл бұрын
Great video i cant wait to see more. im building a RB10 right now out of all my DR10 parts. But ive wondered if id be better off just buying a B6.4 team kit.
@PopalongRC Жыл бұрын
Depends what you want to get out of your racing and where you plan to run it ..
@kevingildea4102 Жыл бұрын
@@PopalongRC it will be a high bite indoor track. im in the same boat as you guys ive never ran indoor carpet. and i haven't raced in about 15 years. looking to have fun and not be last. for me the reason to start the rb10 is the amount of parts i have already because of the dr10 that can be swapped back and forth. also im not running stock electronics its a 17.5 class that races.
@PopalongRC Жыл бұрын
I think if you get it geared equivalent to other cars and all running 17.5 you should be ok.. from what I am hearing it out performs mid motor cars on low grip tracks but struggles more on the high grip stuff. Are you going to race or going to win.
@roadrunnerorange Жыл бұрын
If you strictly race it, yes, b6. For race/parking lot/ bashing, go for the rb10. I have a feeling parts support is gonna be around for many years to come like the b4 did.
@jeffbryner5355 Жыл бұрын
I would love to see a Traxxas bandit vs rb10. Stock vs stock
@PopalongRC Жыл бұрын
Interesting combo 🤔
@jeffbryner5355 Жыл бұрын
@PopalongRC right. I know which one would win but alot of entry level kids/adults don't know even what team associated is or they may think they are strictly a racing company. If you like rc then you know who Traxxas is.
@The.nitro.keeper Жыл бұрын
Will the rb10 only take a shorty battery ? Or will a standard size lipo fit in there ?
@PopalongRC Жыл бұрын
Running standard LiPo sticks …
@whafty Жыл бұрын
How good did Lee Martin look driving his new Schumacher? Did he give any advise on setup to you? Also, have you checked out SHRCCC (Farnborough), they do an open practice on Tuesday evenings?
@PopalongRC Жыл бұрын
We will take a look. Had a chat with him but did not talk setups . Car looked good
@rcfunwithfatherandson6483 Жыл бұрын
My son and I and trying to get into the sport we are lucky to have access to a private car park. But can we use our out door cars for indoor racing club. Sorry for the silly question trying to learn
@PopalongRC Жыл бұрын
Depends what your outdoor cars are General rules is determined by what class you are running. If running on carpet the car needs to clean and fit for purpose as you don’t want to be responsible for damaging the carpets.
@rcfunwithfatherandson6483 Жыл бұрын
@@PopalongRC thank you trying to build my confidence to go to the local club. As we aren’t great at driving but we both enjoy playing with the cars
@bassplyr1906 Жыл бұрын
How about the tamiya TT02BR vs B74.2?
@PopalongRC Жыл бұрын
I like your thinking Perhaps Carl gets the pro buggy this time and Mark runs the budget car..
@D1RTYF0RSYTH Жыл бұрын
Why such a big motor in the buggy? Most people run 17.5...
@fencer39 Жыл бұрын
Great video guys . loving the content. Next step (when the weather is better) 1/8 Nitro...........Lee martin is not bad at that either. check out the new Nemo car. I'll expect to see some 1/8 nitro racing action guys !!
@PopalongRC Жыл бұрын
Maybe we can get Lee Martin to show us how it’s done…
@unorec1983 Жыл бұрын
so the rb10 has the equivalent of a 13.5 motor in it and the kit buggy as at 6.5 motor thats a bit of a discrepancy
@PopalongRC Жыл бұрын
Really pleased with the progress I have made with the RB10 Still almost stock and only a couple of laps off the fast cars
@atomart_rc Жыл бұрын
I would beat you all with my FTX Comet….😂😂😂😂
@PopalongRC Жыл бұрын
That can be arranged
@atomart_rc Жыл бұрын
@@PopalongRC 😂😂😂
@fencer39 Жыл бұрын
Hey Guys.....Did i hear it right you got a mention by Lee Martin and an invite from Jon to go to Nemo ? Youre gonna wet ur pants when you see the N1 !!
@PopalongRC Жыл бұрын
Yeah we put a video on our face book page … looking forward to it. Although it is still a bit cold out and days are short so will wait until a little later in the year
@PopalongRC Жыл бұрын
fb.watch/ijJZOO1pHi/ Will probably do a video to include this at a later date …
RCKicks
Рет қаралды 16 М.
RusMovies
Рет қаралды 1,5 МЛН
Heavy Deuty Electric Tricycle2.1
Рет қаралды 12 МЛН