Click here for the LEGO product page - racingbrick.com/product/42159-2/

Those new gearbox pieces are about a 1:1 replica of a real motorcycle constant mesh sequential gearbox parts. The blue parts called shift drums, they drive the orange shift forks which are then connected to dog gears to interconnect with the slotted gears. Exactly like real ones.

I love the new gearbox bits, those alone are tempting enough to consider the set, even though i dont really like naked bikes, and i think these 1:5 scale bikes look a tad odd so far. The AR app really cracked me up with the "crossplane crankshaft" note, since all lego ever do is single plane, and incorrect ones at that. Im extremely excited to see what next years hypercar can do with these new gearbox bits.

Kudos on that gearbox with those selector drums and forks. Those blue wheels wouldn’t look bad on the BMW bike. Specially in combination with the gold shocks. Oh and those yellow/gold-ish shocks, they must resemble Öhlins.

SUPER impressed with this build! Love the way the frame comes together in bag 1 and then the whole engine/gearbox assembly is constructed and mounted into the frame. Just awesome. Can't wait! ~Matt 💜💙🖤💙💜

The new gearbox parts make me wish I was a MOC creator, I would love trying to squeeze everything possible out of the new pieces. Unfortunately, though, I tend to be someone who just sticks to the sets as they are supposed to be, and I am satiated on Technic motorcycles at the moment. Still, I can't wait to see how these pieces are used in future sets and others' MOCs!

Szia Balázs! Már a videó előtt el volt döntve, hogy mindenképpen meg fogom venni, annak ellenére is, hogy több csoportban lehúzták, pedig még csak a fotókon láthatták. Engem már csak a kék felnik megvettek kilóra! Nagyon tetszett a részletes videó, de leginkább a pozitív értékelésed! A videó hatására örömmel szerzem majd be, és nagyon várom majd az összerakását! Végül köszi szépen a magyar feliratot is! Üdv, Unoka!

As a motorcycle rider myself, that is nice. The shift mechanism is great. It looks like it shifts a lot smother than the BMW. I'd like to add that to my bike collection. As always, your builds and opinions are greatly appreciated.

I love how complex the build is!

the big 4x8 inverted tile piece has been released in a few new sets and I think the first time it was pointed out was in the recent UCS X-wing, the black one in this video also exists in a new beach party-themed friends set

Realy nice set! The new parts are so cool! Nice review as allways! I watch your channel from the very begining.

Having seen the building process, I like it even better! I love this new 1:5 motorcycle series and each new model will likely only get better, both technically and aesthetically, so I’m sure we’re in for nice treats the coming years. As always, wait for those special days where you can get discounts up to 35 or even 40 percent, and you’ll have a great building experience on your hands I’m sure.

Wow, tye new gearbox parts are amazing! It's interesting to see them return to a 2l driving ring, but improved for less slack. The sliding forks make this VERY similar to real gearboxes, I wonder what kinds of gearboxes in cars can be made in the future. And also, the bike looks cool.

Can't wait to put this together.

Super cool set!! Love the new gearbox parts!

This Yamaha bike is the most magnificent set Lego has ever produced !! imho It's really beautiful, huge, practical, cool and all.

Seeing the building process changes between the BMW bike and this one is really interesting! Love the fact that the air intake grill behind the front wheel is much more secure than on the BMW, I always had troubles with it popping off. Interesting that it has the engine built in phase 2, excited for the new parts! I wonder how difficult it'll be to convert the engine in the BMW to use the new parts...

Wow, new gearbox pieces, let's goo!

This is a must set for me. Will sit nice with all the other bike sets i have.

Its a good thing that Lego create different size of clutchable gears. Like a real manual gearbox, with forks to clutch the gear. A real gearbox has a synchronizing gear, here it is the grey ring who make the job. Old gearbox needed an extra shaft to reduction and lot of friction. 3 different gears, we just need 2 more and it will be just perfect.

Finally LEGO made pieces for a transmission that actually look like they are designed for a transmission.

as a Yamaha MT-07 owner im excited to see the MT-10 getting into LEGO! Im definately gonna buy it.

Price is absolutely crazy imo, I bought the BMW bike at launch for €200 (250 now) and it has 500 more pieces than this? Why are they charging so much is it the licence?

4:44 thank you for that, I was thinking I did something wrong 😂

As an owner of a '23 MT-10 i simply MUST have it, it's so cool!

Finally.Set that it has the real building steps as in the real motorcycle.

I LOVE the headlights

The new gear boxes I hope will be more available in small scale builds and sets

it's beautiful.

Finally! A realistic sequential gearbox!!!!!

I would have liked to see new parts to make a Crossplane crank. It's an important selling point of the original bike, it's mentioned in the AR, but it's not there in the model.

I'm not into motorcycles at all but the new gearbox parts finally look like real gearbox parts

Not a fan of the new gearbox pieces until I see them working with the old manual changeover catch. Especially those new wave shifters are way too huge and it doesn't help that they come in such a gaudy color. Also, I've said it before and I won't stop saying it: a model where you need an AR app on your smartphone to look at how the mechanism(s) work does not deserve to carry the "Technic" banner.

0:33 Yes it does, it has the side mirrors.

Oh it‘s nice. But it‘s too expensive

The parts for driving the switching of gears look a bit over complicated, I envisioned this kind of part to use existing worm gears, but I guess matching the travel length and making it easy to assemble was a bigger priority here.

Since I don’t see anyone that pointed that out: the “indicator” is not an indicator at all, thus why it’s covered. Its main purpose is simply to allow for only 4 positions of the gearbox. It “stops” you from shifting when it’s at either end

This Yamaha gearbox system are way more stable & mature than BMW. Big thumbs up for designer.

The piece for the plaque was introduced in the ucs x wing

Thank you for the review. I would have the same critique I had for the BMW... You can't see any mechanical part working. In the end it just becomes a very expensive toy that you had to assemble yourself, something to display, rather than play. Not much to enjoy on the technic side once you build it.

Great review. I might have messed up something, but when changing the gearbox from neutral to any other stage and turning the wheels on the lego stand support, the engine makes crippling sound, and also the chain part stutters. The same happened to me with the BMW set. From my experience, slightly lifting the front of the set seems to decrease the stuttering. Also it doesn't happen when rolling the set on ground. Did anyone notice this kind of deviation?

About time Lego finally managed to put the front tyre correctly on their bike🎉😅

i realy enjoyed building the BMW but found the gearbox a bit flumsy. looking forward buidling this Yamaha. I realy like these scale bike models. And i'm not a bike freak but i like these more then the cars

Is it posible to spwap nutral and first gear

I’m surprised when it comes to the colouring… didn’t expect that

Absolutely stunning price

The new pieces are exciting but is using an axle to push the stepper (yellow) gear good enough? I'm wondering if they could have added a better piece for that too... A bit unfortunate you have to use the app to see a virtual version of the mecanism, or even the model's documentation, not sure how long this app will be maintained... Nice review!

I'm glad Lego is finally starting to make proper gearbox selectors, but I don't like the design of these specifically. Having what's essentially the old design with an intermediary portion just doesn't feel right to me, it feels lacking, especially with the space the new assembly requires. Personally I'd rather see a slightly longer shaft with discrete steps along it, and also a way to limit steps so that if you have an atypical design that requires a certain amount of steps between two clutch gears it's still fully possible with the same parts. However I do recognize that this design does have some flexibility in use when multiple selectors are stacked and clocked differently, but I also think this is a very specific range of use compared to a more proper part that just let's you have more selector positions along a longer shaft. I also wonder about the longevity of the new yellow cogs, the way this set uses them also doesn't really feel correct either, having a beam to lock one in place when a ball joint could've sufficed, having an axle push-rod also seems a bit odd. I'd be curious to see how these new parts are motorized in the future, I'm assuming Lego has an interesting implementation. For example on my complains about the new selectors not having discrete stops, etc., at one time I had a design of the old style of selector (the red ones) in combination with a geared auto-reversing linear actuator, this setup allowed for the driveshaft to be extended linearly which allowed for horizontal tessellation of clutch gears to allow for an automated sequential switch of a very large number of gears; of course this assembly was large on its own, but it also demonstrates the fact that selectors shouldn't be so inherently limited, and especially not when you want to expand beyond four or eight (which in the new selector's case is still 4 but with an intermediary pause) selections, technically even odd-numbered selections were possible thanks to the newer 3L axle connectors in combination with the older 2L ones while using the old 2L selectors. If the previous could ever be miniaturized in any way, which would be difficult and would rely on custom parts if not having it fully motorized with multiple motors switching inputs instead of being fully mechanical with a singular overall input method, then I'd prefer that over what Lego is currently doing; I just think Lego's system, while simplistic, is also inherently heavily limited in usability, at least in sequential uses, as fully selectable uses (such as an H pattern box) are a much more complex issue that really isn't possible anymore with the current system not having a proper slider like the old red selectors were. I also wonder if any MOC creators have any plans of taking a couple of these and making a Yamaha Niken. The coloration is mostly correct, the branding is mostly correct, I'm sure paneling is adaptable, the major hurdle is the leaning mechanism and its cowl.

this has the AR feature i had thought the BMW should have had.

Out of all the more realistic bike sets which one is the best

You've gotta be kidding me 1400 pieces for $240 c'mon the Ford was 1400 pieces and it wad $120. Edit : Dang this is the most likes i have ever had

I’m a motorcyclist and love the 1:5 BMW being a sports bike rider. I don’t find this model very appealing unfortunately either the real or Lego version. Would have preferred the R nine T as a naked Lego version but glad to see more of these large scale motorcycles well done Lego

I just bought one of these,managed to get one for $279.99 AUD Looking forward to building it

A very colorful gearbox 😂

Looks like lego's starting to make motorcycles now. Hehe... If yes, i'm really hoping for a Ninja H2 or a new, big wheel version of the Panigale V4R. And if not that, then at least a dirtbike like the Crf 450, Klx 450 etc.

I like the design, but the price is just insane. I like this bike category, but I really hope they make a harley-davidson someday.

I'm really waiting for a 1:5 cross bike.

Love the technical parts and new pieces! A shame it's THAT expensive...

I just have one important question…..what’s to become of the orange wave selector!?!?!

Thank you for your review, high quality as ever. I hope this model is the start of a new trend that I would really welcome: A proper chassis with a whole gearbox and engine subassembly, like in the real world. Along with the new gearbox parts, this set comes as close to the real thing as nothing before. To all potential customers: Please, please, please buy this to show them that this level of effort gets apprechiated.

I hope Lego will make more sportbikes.

I'm in awe with the new parts

3:47 How do you align the blue gear same line with letter F and G same as manual? Are you able to follow or align the gear because I can't do that. Need help

This looks beefy and imposing, i like it a lot!

Wish they made the older MT-10 aswel. 🙏🙏

15.6 cents per piece is just insane for a set without any alternative builds, motors or electronics. It even costs the same with the BMW motorbike with 500 more pieces, itself hardly a bargain too. Lego has really gone off the deep end with their greed. And the absurd color vomit makes it look more like a Duplo set than a 18+ set. Hard pass from me, and it's a pity because that gearbox looks interesting even though it's azure, green, orange and yellow.

I like Lego technic motorcycle very much too.

So maybe 16-speed gearbox in 1:8 supercar next year?

if they did the Honda NM 01 then I might consider buying it

I have the BMW motorcycle myself and I perfer that to the Yamaha bike....keep up the good work my man.

I'm so excited for the Audi RS E Tron I,m going to have the Audi RS E Tron

Overall the set looks great. I own a Yamaha R1, so I'm rather biased. Wish this would have been a R1 rather than a MT-10. Maybe someone will create a moc of it.

Do you think i shiuld get the bmw or this

The last time that 40 tooth gear appeared in a non-bike Technic set was 2004, some random information that I found out.

been supporting your account since 30k, just didnt have an account so i couldnt sub Iol anyways thanks for the great content, youve saved me a few hundred

Is there a point where you can input a lego motor? Not to drive around, just to sit behind the stand o something and drive the gearbox. Would be nice to be able to shift gears and actually see the ratios at work, rather than spinning the wheel.

Bmw motorbike has a georbox flaw that causes to gearbox can stuck and you cannot change gears. I hope this new parts will fix this issue.

im not a motorcycle fan, but it looking amazing

Do you think this gearbox will hold up under torque of a heavy model, say a tracked vehicle? I am interested in testing it but the price is a bit high since you need two for a tracked version.

May be picking it up in a good sale. I'm still not sure I like it, though looks abit better close up than the pictures 😂

Damn…. Another must have….😂

As I expected, Yamaha license is too expensive... not a surprise...

Mable they can make it a half click for neutral.

Why is neutral between 1st and 2nd gear?

I dont know if I saw correct but the engine is not moving as a BIG BANG. Can you confirm?

I don't know how it was in the instructions, but at least in the video the engine is not not how it's in the real bike. I know for most people it's probably a minor detail and they most likely don't even know it, but the engines in the BMW S1000RR and the MT-10 SP are actually different even though they are both inline 4. the difference is in which order the pistons move up and down edit: don't know if the Yamaha crossplane is possible with Legos, but for me it is kind of a big deal to have it

I've been contemplating lubricating my gears for quite a long time, but i'm too worried about chemical reactions with the ABS and the tendency for lubricants to Get clogged up with dust and debris. Does anybody have a suggestion for the best lubricant To use on these plastic gears? Something that won't react chemically and stays relatively clean? Any help would be greatly appreciated.

Can you please tell me what are the parts numbers and design numbers for the new Lego gears?

So what other models can you make with this set? For that money I’d like to be able to make more than just one model.

I'm going to keep saying it, we need access to clear technic pieces so that we can swap out parts for display. What's the point in putting in all the effort for the gearbox if it's all covered?

Yeah

Hold up, what set is behind you with the yellow wheels?!

Please 42146

These days your videos feel a bit rushed i.e., you could have expressed how do you see/feel the new gearbox setup with all those new parts. A comparison to BMW or all the previous transmission systems could have been helpful with a few more words. As much as I like your detailed build narration I also miss the past slow paced text only videos. You talk to us moar it helps all of us undertsand the set better.

Now seeing it in OFFICIAL pictures I think it's more successful than the BMW in looking like the act model plus it has better functions, looks more accurate, is cheaper and has greater challenge. Maybe it's my bias as do I like the New MT-07 but I think the set looks great I'd get this but it's still a bit pricey I mostly buy the £109 priced Cars I wish LEGO Went back to the Ducati Pinigale V4 scale as more bikes within that size would be preferable At £70 or have the BMW size bike line be £170. Edit i Thought this was the MT-07 didn't know it was the MT-10 LOL

Id like to see lego do a gen1 hayabusa

The set would be very nice, but the colors of the panels just dont do the original justice. And concerning the pricing, we germans would say: "Die haben doch Lack gesoffen" (aka they drunk paint). The price is ludacrious for 1500 parts

The engine doesn’t have the yamaha crossplane crankshaft

It’s alright I think

May i know sir if how many hours you built this Lego?