Radiolink RC6GS v3 - INSTALL and Overview - Setup Dual Antennas, Gyro & Telemetry Explained

Рет қаралды 21,200

Жыл бұрын

For an "above and beyond answer to your questions" ask here:
asqme.com/@EastTactics
find your parts here first - Organized Storefront
www.amazon.com/shop/easttactics
East Tactics MERCH (Shirts etc)
east-tactics-shop.fourthwall.com
01:18 Telemetry
03:40 Installing the receiver
09:44 Installing Duel Antennas in a BASHER
13:02 Radiolink Battery options
14:37 The Value of 7 Channels & Mode Options
15:57 Buttons Overview
18:46 The Insane Value of the RC6GS v3
19:50 Choosing and setting up the Right Mode
21:33 Gyro Details
25:57 Binding the receiver to the Controller
28:13 Turning Gyro On and off, correcting the phase
31:03 The Value of Fail safes!
32:08 Final thoughts, how and where to buy with promo Code
Comprehensive install and basic overview of this amazing transmitter/receiver combo. Believe it or not, because of the sheer magnitude and depth this transmitter provides... I still will be dropping a completely separate video doing a deep dive on all the features and functions. Stay tuned.
For a short time - Please take advantage of a Flash Sale on this product!
To my loyal subscribers, please note ... picking one up during this sale will be a huge help to secure Radiolink as a sponsor in 2023 East Tactics Jump challenges. Go TEAM!
NEW SHIRT DESIGNS
East Tactics MERCH (Shirts etc)
east-tactics-shop.fourthwall.com
USE PROMO CODE @CHECKOUT - 10easttactic
Radiolink RC6GS v3
amzn.to/3SmRKJt
10% off Promotion
Started AM 09/29/2022
Expires End of day 10/2/2022
ALSO SUPPORT THESE SPONSORS IN THE MEANTIME!!!
(PROMO CODE SAVINGS BELOW)
LET ME KNOW IF YOU DO... love to hear it!
all links at my website too!
East Tactics - www.easttactics.com
M2C - m2cracing.net
GARAGE LIFE RC
garageliferc.com/
3DRC BASHER PARTS -
Killer Flexible Wing mounts!
3d-rc.online (15% off use Code - East)
RC lipo Batteries
6s 120c 6000mah 15% off use Code - 6Easttactics
amzn.to/3OcdZzh
6s 120c 5200mah
amzn.to/3MJZSQE
RC Lipo batteries Store Front
amzn.to/3OhVnxF
Pyronitro -
CUSTOM 4MM FAN COVERS AND KILLER SKID PLATES FOR YOUR RIG
40mm Motor or ESC Fan Covers, 3D Punisher Skull
www.ebay.com/sch/pyro-nitro/m...
Radio Link -
Amazing versatile long range transmitter receiver combo!
Amazon Store front - amzn.to/3bqv5vw
RC6GS V3 - Transmitter and top Receiver - amzn.to/3SmRKJt
Try promo code 10easttactic (act fast)
Email me
info@easttactics.com
LINKS to other useful things... can be found at my new website
www.easttactics.com
MASTER "USEFUL PRODUCTS" LINK - (large list, scroll to find what you need)
amzn.to/3meGPBU
POPULAR EAST TACTICS PROJECTS BELOW
DIY High Power fan PROJECT Playlist
• DIY RC High powered fans
DIY High Power fan Project (Parts)
amzn.to/2GTPpWt
Shock Mitigation PROJECT Playlist
• Shock Impact Mitigatio...
Shock Mitigation Projects (Parts)
amzn.to/3bVZAFw
*If you've read this far... you're awesome!
info@easttactics.com
Please consider supporting my channel through Patreon
For less then an energy drink per month, it would mean alot!!
/ easttactics
Quick Gesture of Support - www.paypal.com/paypalme/randy...
#EastTactics #ArrmaMods #ArrmaKraton #ARRMARC #RCCARS #RC
As an Amazon Associate, qualifying purchases support my channel at no additional cost to you

Пікірлер: 142

@diggy2107 25 күн бұрын

Thank you so much!! I was able to follow along and understand how this works! I just ordered my Same Radiolink as this because I been hearing so many good things about the radiolink! And I am watching the videos trying to learn as much as I can before I start install !

@kevingalea92 Күн бұрын

Never mind that's such a smart idea how you drilled those holes bud

@ricklonetti9587 Жыл бұрын

You sir did a fantastic job with this video!!! You answered every question I had about figuring this out. Thank you !!!!

@bronxsavage1641 Жыл бұрын

Great information I'm definitely sold... I currently have a gt5 but I'm not super pleased anymore. Thanks for the closure on knowing what I wanted.

@RickyD1968 Жыл бұрын

Awesome Video !!! I have a CEN Reeper monster Truck and it came with a crappy radio so I purchased this radio and WOW very nice radio plus I'm using the gyro works perfect !!!!!!

@kaosrc8679 Жыл бұрын

Great video! I have the RC4GSV2 that I picked up when I bought a used rig with no radio/reciever. I have since switched it over to my stock Kraton 6s and still fiddling with the features. I love the range I get with the RadioLink over the stock Spektrum SLT3. The park I run at the most often is hilly and wide open, I can easily lose sight of my truck now if I am not careful. Looking forward to your detailed features video, as there are not many that help with this.

@jhonlikethese6705 8 ай бұрын

My transmitter comes tomorrow.. im excited!!!

@EastTactics 7 ай бұрын

Nice!!!

@hyperc5249 Жыл бұрын

Just got this controller to run my Rally cars. Thanks for doing these videos.

@EastTactics Жыл бұрын

🤜🤛

@islandrc-duke1972 Жыл бұрын

Cool remote and receiver, great information and video

@joeycrack509 Жыл бұрын

I love this video I been curious about this since I got mines V2.... these antennas 🧐👍🏾👍🏾👍🏾

@chriscrawford1958 Жыл бұрын

Literally a million facets! Literally!

@callsignmohas5190 6 ай бұрын

I just got into the hobby this summer. Im starting a new rock crawler build and i was just browsing around my local hobby shop looking for a decent 4 channel. I have a scx10chassis with a 2 spd trans and 12t550 so i need a extra channel for my transmission. Guy at the hobby shop sold me this today for 50$ It has so much going on it’s overwhelming. Great video man thanks a bunch!

@EastTactics 6 ай бұрын

For sure! Glad you found it useful

@Magneticitist Жыл бұрын

Radiolink are champs for this controller. I can't believe the features for the price.

@RC4us Жыл бұрын

Sweet video bro you kill these tech videos

@EastTactics Жыл бұрын

Thx!!

@danielketchum7853 Жыл бұрын

This video is amazing great detail thank you

@EastTactics Жыл бұрын

Glad it was helpful!

@Hankster360 Жыл бұрын

Great vid man. All great information this is exactly what I needed. One thing is I highly recommend not using double sided tape. If you ever wanna take out the receiver, it will break while removing.

@EastTactics Жыл бұрын

Thanks!

@manuelsmeets9392 Жыл бұрын

You Rock!

@jhonlikethese6705 8 ай бұрын

Vid.. thanks bro

@EastTactics 7 ай бұрын

You bet

@gamercat7004 9 ай бұрын

I have this remote and receiver i spent for 84 dollars and its worth it 👌 have this for my kyosho 1970 dodge charger rc and i need programming to make the lights to work and i have my rc made as the duke o death from gta5 and to have the roof lights and underglow and to make adjustments for the driving experience more fun😊

@EastTactics 9 ай бұрын

That’s awesome!!

@sufyaankhan232 17 күн бұрын

Hey bro, is their anyway i can install a reverse light to the receiver and only have it turn on when i brake? Have a max5 combo thanks

@bdwcreative Жыл бұрын

❤

@mathias4891 Жыл бұрын

Late to the party but I hope this helps and btw I've been running the V2 since it came out and friggin love it! ... I removed the receiver box attached to the battery tray and using an extra section of antenna tubing I liquid electric taped it along the bottom on the driveshaft side and just reassemble running one antenna through it. You can just pull the antenna out if need be and you can barely see what's going on so it looks clean and you get all of that range love! For the telemetry I cut the jst off the adapter and soldered direct to the base of the esc as you would if you were running a cap pack . Perfect length for it as well as you'll notice the wires are thicker than what you get if you buy those bulk just connectors . Battery for the controller? 4s of course . My only and minor gripe here and hopefully they fixed with the V3 but it only reads up to 15.4V even though the battery is fully charged. Hope this gives people ideas! And yo East! Keep it up bud! Great stuff!

@EastTactics Жыл бұрын

Nice! Thanks for commenting. There’s no such thing as late to the game my friend. Regarding the read out for the battery only going up to 15.4 I actually think that’s intentional because technically you should only charge Lipo batteries that are going to sit at a full state for a very long period of time up to storage level maybe even a little bit above that to be safe. So actually if you take storage level which is about 3.85 V per sell and multiply that times four you actually get that 15.4. I know it sounds strange to only insert batteries at less than full capacity but if you think about it, the time it takes to go from 15.4 V down to LVC is like… Forever. So you might as well play it safe with them Lipo batteries sitting at near full charge for long periods.

@mathias4891 Жыл бұрын

@@EastTactics right right just as you explained in your video it's just that's about the only thing I could think of that was even remotely negative to say about the device lol .. well that and my peticular radio came with some kind of debris trapped under the screen that's annoying to look at . And what a turn of events it snowed just a little this morning and I had been planning on doing my kraton annual full rebuild and took it out for one last rip and now the receiver is bugging out like some wire is bad and I'm not getting power to it . I love troubleshooting so this will be interesting. And having seen that you did a dual battery for yours I just wanted to say I poured over batteries for mine for about a month and chose the 1050mah tattu from gens ace and just spliced a jst off the xt60 it came with. I'm sure you found that thickness was the biggest hurdle in your search as it was for me because I still have lots of room in the compartment so I put foam in to get a more solid feel . Cheers!

@EastTactics Жыл бұрын

🍻

@FORD150-5.4 Жыл бұрын

How I know if the receiver is defective or the trasmitter because this receiver don't want to bind? Soo I goin to try to put in firt mode to get the green led and is supposed to pair whit the receiver right???

@ahmadfaris8044 8 ай бұрын

Hi, my traxxas summit uses dual steering servo, how can i set-up the r7fg receiver to act like the old tqi receiver?

@ironhead320 3 ай бұрын

Just update mine there nice controllers

@Acornejo02 10 ай бұрын

@EastTactics Being that this video is almost 1 year old, would you say this is better than the Spektrum Dx5 rugged? All of my car already have Spektrum receivers and I wouldn't use most of its functions, I really just want to get rid of some transmitters lol I got 12 now! 😅 Mostly dx3s Felony, Kraton, Typhon, Talion, big rock, infraction, Vendetta and a few odd projects but they all have Spektrum receivers.

@EastTactics 10 ай бұрын

Functionality and control, slightly better, aesthetics, and feel slightly worse. Range much better… Overall …better yes But not by much. Both are great

@Moggmodels23 11 ай бұрын

Hi mate great video like the radolink rc6gs-v3 I'm defoe getting mine. Because I've got the old flysky gt3b at the moment. That only holds 10 models but when I seen this it holds 30 models that fantastic brilliant. What I'm worried about is the 2 wires what comes out of the receiver box. But the gyro is brilliant not sure if I keep mine on all the time mate 👍

@EastTactics 11 ай бұрын

Yeah, it’s a challenge finding a unique way to get those wires out of the box and ensuring that the transmitter it’s good reception to them.. and yes, regarding the gyro. You’re definitely said that to the turn dialed in for the most part will probably keep it off. But it’s fun to mess around with.

@Acornejo02 10 ай бұрын

👍

@FORD150-5.4 Жыл бұрын

My receiver flashing red, blue and purple..reason because i presst the little buttons because this receiver don't want to bind soo now is flashing 3 color and still doesn't pair whit the transmitter I don't know what I doing wrong?

@ironhead320 4 ай бұрын

Thinking of getting one.for my revo 3.3 but i guess it can be programmed for the opti drive

@EastTactics 4 ай бұрын

I’m not familiar with the how to on that. But if any 3rd party transmitter could it be radiolinks

@PLASMA_2005 Жыл бұрын

Doing an fpv setup... gona put my camera/ subsystem battery to this and the voltage display (buying a plug in thing basically) will go somewhere near the camera so I can pan or tilt to look at it when need be

@EastTactics Жыл бұрын

Nice

@FORD150-5.4 Жыл бұрын

My receiver don't bind I preset the button and now flashing 3 color red,blue and purple and don't want to bind I don't know what I doin wrong?

@FORD150-5.4 Жыл бұрын

I have problems with this receiver don't want to bind?

@stevewahl6817 27 күн бұрын

Did you ever figure out what 4s battery fits best? I looked in the description and it's not there. 14:24

@EastTactics 27 күн бұрын

Yeah, I’m referencing the two 4s batteries that are being pointed out in my separate video. You’ll notice a thumbnail pops up and arrows point at both of them. Those two batteries are found on Amazon… link in description of the following video: Best Lipo batteries for your RC transmitter - Parallel mode & Best practices - Radiolink RC6GS V3 kzfaq.info/get/bejne/kJijjJhhnsrKnqs.html

@stevewahl6817 27 күн бұрын

@@EastTactics Got it, I just watched. Thank you for the reply and the help.

@Mr.Laidukas Жыл бұрын

If it had temperature sensor in it's telemetry system (for Nytro) I would buy it. Not having temperature is a missed opportunity, when they already have link capable to send signal back with telemetry

@Ketoholic 11 ай бұрын

But they do have, temperature, speed and voltage, charge capacity etc. you just need a 7 channel receiver and plug the tiny modules into it. They are sold separately though.

@Mr.Laidukas 11 ай бұрын

@@Ketoholic I saw them advertized as I6X Radio/ IA6B Receiver telemetry modules. Are you sure that sensors are compatible with this car radio ant its receivers?

@BeTheRC Ай бұрын

I just finished setting up my recover this same one. But the throttle is reversed when I hit the gas it goes in reverse. How do I fix this?

@EastTactics Ай бұрын

You can change the Forward and reverse of your motor by either changing the settings in the ESC. Watch my instructional video on the firma 160. Another way to do it is a simply swap the outside two wires on your motor leads

@Webb4RC 5 ай бұрын

I need some help. I have the Hobbywing Fusion quickrun SE 1800kv running a 2s lipo 7.4v. My transmitter is RadioLink RC6GS V3. I have paired the remote with the motor but it runs crappy. I think i need to change some settings within the transmitter and i dont know how could you help? Also my reciever is red but the transmitter works i can drive and steer but like i said its crappy so i dont think is bound correctly...

@EastTactics 5 ай бұрын

How does it perform when running the stock radio and transmitter? Revert back as a test

@Webb4RC 5 ай бұрын

@@EastTactics I fixed the issue. It had to do with the transmitter settings particularly the A.B.S. Thank you though!

@bashmasterRC Ай бұрын

I kept losing signal to throttle at long range! Steering works fine but throttle does not! Any idea

@EastTactics Ай бұрын

The fact that you lose throttle only is a huge blessing with this receiver transmitter. With the stock one. At loss of range, your vehicle has a potential ( which is high) to simply takeoff. You’re losing connection? At what range? Because you are going to lose connection, especially if you are behind large objects, trees, or buildings.

@DannyDanny-lg9rv Жыл бұрын

Hey bud quick question I’m having a headache I have a erevo 1/10 dual brushed motors dual servos and I just bought the same remote but I can’t get the car to turn all the way right or left ,I posted a video of the issue maybe you can help having the same remote and thanks.

@EastTactics Жыл бұрын

I really don’t know a whole lot about setting up dual motors or dual service. For sure a remote/receiver combo that’s capable, it would definitely be the RC6Gs. It sounds to me like there may be a setting when you are running to servos that needs to be adjusted because perhaps the system thinks there’s only one so it’s only giving 50% radius to both. But you need to go in and activate 100% by navigating to each respective channel, connected to the servo and opening up the range. But this is just a guess because again, I’ve never set it up. Sorry I couldn’t be more help.

@DannyDanny-lg9rv Жыл бұрын

@@EastTactics thanks man I appreciate it

@P_double_H Жыл бұрын

All 4S batteries won't come with the JST connector because the voltage is higher than that connector is made for. 4S will have an EC3, or an XT60 connector. I bought a set of lithium rechargeable AA batteries that do 1.55v per cell... 9.2 total and it lasts forever.. and obviously they fit perfectly with the included AA tray.

@EastTactics Жыл бұрын

Yeah, that’s perfectly fine, however…if the transmitter is capable of handling, 15.4 V, though why not take advantage of it and see how it impacts range performance. You’re correct the 4s batteries do not come outfitted with JST connectors. So you do have to do a little bit of work to convert but it’s a simple work and totally worth it. This video showcases how to take advantage of 1100 mA of 4s power, run in parallel can be outfitted inside these transmitters. And that rocks! kzfaq.info/get/bejne/kJijjJhhnsrKnqs.html

@CamaroWarrior Жыл бұрын

They should have sent out their new Radiolink RC8X radio

@ChrisCroft77 Жыл бұрын

Coming from FPV world, I wish there a transmitter that had EdgeTX (OpenTX) so just program and button to do anything including what you would like for disabling the gyro.

@EastTactics Жыл бұрын

Yeah that would be nice. I’m not very familiar with that TX stuff, however it sounds versatile. You do gotta give kudos to Radiolink for at least being light years above most offerings in the land radio arena.

@ChrisCroft77 Жыл бұрын

@@EastTactics currently on Radiolink & Flysky seem to do anything with RC car transmitter world. Unlike the big names

@FarmerFpv Жыл бұрын

You can disable the gyro remotely with Flysky Noble, Futaba, Spectrum, Airtronics and many other radios. You can program all the Aux channels to do what you want. I fly fpv too. I have 9 channels that I program on my crawlers to do all kinds of features from lights, winch, and rock lights. Drag brake, fpv camera, gyro on and off for jumping. So not sure why you would need open TX for RC cars when you already can run as many functions as you want to depending on how many channels your radio has.

@EastTactics Жыл бұрын

@@FarmerFpv Would be nice if radio link incorporated the option. Especially considering the budget price for their ground radio combo.

@Raven_of_Doom Жыл бұрын

23:47 Active gyro will turn your wheels into the correct orientation in air, for the landing (think about World Rally). Should help counteract the rotation, not contribute to it.

@EastTactics Жыл бұрын

To your point what you’re saying makes sense. However, most people consider being airborne some thing they need total and complete control over themselves. Trying to counteract the AI might prove difficult. I’ll have to do a little bit of testing to see if the Gyro actually helps or if in fact, it hurts. Will let you know.

@Raven_of_Doom Жыл бұрын

@@EastTactics maybe you mean for backflips. If that's the case, I'll bet the gyro DOES fight you on that. OK, let us know and thanks for all the work on that video, I'm going to use it as a reference. Ordering this stuff up (Tx and extra receivers)

@FarmerFpv Жыл бұрын

My RadioLink malfunctions bypassing failsafe and my Kraton jumped off the 4000 ft canyon. It's still at the bottom I can't reach it. 😂 . I'm Just kidding, I don't even own a Radiolink, lol. Giving you a hard time. Great Tech video as usual.

@EastTactics Жыл бұрын

😳🤣🤣😎

@edward6948 Жыл бұрын

Hey man have had the radiolink v3 for a few days but noticed when I turn gyro on it wiggles back and forth any feedback would be nice...not sure if I'm doing something wrong as I have the orientation right..

@EastTactics Жыл бұрын

You’re able to adjust the magnitude of the Gyro by turning the dial right? If not, you want to activate that feature. I noticed too when I had the Gyro at 100% it would make the vehicle do that. You’ll never want a Gyro to be at 100%.

@edward6948 Жыл бұрын

@EastTactics yeah I am but even when setting to maybe around a quarter of the vr knob it still wobbles going to go and test again soon once it stops raining..I'll keep you informed thanks for the quick response

@edward6948 Жыл бұрын

Awesome vids btw keep it up!

@EastTactics Жыл бұрын

I’ll be doing a lot of experimenting with the warm season with the Gyro. And to be completely honest with you I don’t have a whole lot of high expectations for me to use it all that much. The receiver is amazing even without the Gyro function. And it’s cool to have at least the ability to play with it. But there’s probably a good chance that I’ll keep it dialed super low if on at all. With more time testing it out there that could change and I might find that I love it. Stay tuned.

@edward6948 Жыл бұрын

@@EastTactics sure will looking forward to it!

@dpyvett2261 11 ай бұрын

Hi Sir, i have a HOSIM X07 and i want to install a RADIOLINK V3 but don't know where to get the SERVO 3 WIRE. Should i get the 3wire from the MOTOR going to ESC? Many Thanks

@EastTactics 11 ай бұрын

I'm not 100% sure what you're talking about, but I'll take a shot at trying to answer. The wires connecting from the motor to your ESC are completely a separate thing regarding your "receiver/transmitter package" they are much thicker wires and they have a dedicated place to connect into the ESC. The ESC however, does have a three wire that comes out from the ESC with a JST and connector. The jST and connector will connect into your receiver. tthere will also be a three wire that comes from your servo ending in a JST connection also. This will connect into your receiver as well. I hope this answers your question

@dpyvett2261 11 ай бұрын

On my radiolink receiver its not lightning up , i think im missing a SERVO wire. So i don't know if i have to get that 3wire from the motor.

@dpyvett2261 11 ай бұрын

On the RECEIVER we put the STEERING SERVO on CHANNEL 1 right? What do i need to put on CHANNEL 2? THNAKS

@EastTactics 11 ай бұрын

@@dpyvett2261 no wires go directly from the motor to the receiver. The only thing that goes to the receiver is wires from the ESC, and wires from the Servo.

@pstarxxx78 Жыл бұрын

Can you use one of the toggle switches as a motor kill switch ?

@EastTactics Жыл бұрын

🤔I don’t think so… You can, however, program a switch to control throttle output, and set that to zero. So that when switched, you would lose the ability to move. What’s your use case? You may be interested to know that, if by chance your vehicle loses connection due to being too far away. That this programmer receiver, combo will automatically cut power to the vehicle. It will not take off.

@pstarxxx78 Жыл бұрын

@@EastTactics my case is. I fly helis planes and drones. The creation of the motor off switch aka throttle hold is amazing. I can’t even tell u the amount of time I reached down for something while driving my Xmaxx and have it blast across the yard. Forward or backward. I’d love to be able to throttle hold when I’m making any adjustments. I have an older radio link for my gas jato. I just ordered the 7ch. Today for my Xmaxx and XRT. The Amazon ad has it with 2 receivers.

@EastTactics Жыл бұрын

Two receivers … nice!!

@KingShit3336 Жыл бұрын

Let's get right into it he says @ the 3:45 mark..lol

@EastTactics Жыл бұрын

Ha ha… If I got a dollar for every minute past my saying that… I’d be a rich man

@Rcprescription Жыл бұрын

I heard that the v3 will bind to certain spectrum receivers, maybe you can verify that with radio link. I just got mine in and if that’s true I’d like to know which receivers it would be.

@EastTactics Жыл бұрын

I’ve never heard that, not saying it isn’t possible. But the simplest thing would be to give the binding a try and see if it links up. From my understanding binding of any kind between a receiver and transmitter is Brand specific.

@Rcprescription Жыл бұрын

@@EastTactics I will give it a shot. I love the idea that the r7fg has the gyro and wil not pull power from the car…for that reason I will be ordering more of them for my speed run cars. I will let you know if I’m successful binding my bashers to the stock receiver…🤞thank you for the response

@2259chevy 9 ай бұрын

@ east tactics on my Traxxas summing I have 2 steering cables one goes to ch1 where do I plug my other cable at ?

@EastTactics 9 ай бұрын

Out of your ESC, you’ve got a cable that is the out for your on off switch to the ESC, you’ve got your main thick power cables to go to your battery, and you have one wire (which is comprised of three) that will go to your receiver. Typically this will go into the spot marked TH for throttle. Now your servo will have its own wire again comprised of three. Which will go into your receiver in slot, titled steering. However, you’re saying that somehow you have two separate wires for steering? Where are these two separate wires coming from, the only wires that you should have dedicated for string should becoming directly from your servo. And there should only be one set of three going into a single JST. Check the description of this video and at the top you should see a link for the ability to submit a Asq me question, include photos

@2259chevy 9 ай бұрын

@@EastTactics thank u, that’s where I’m lost one wire goes to one servo to turn left another servo to turn right and only one location for steering on my new radiolink

@EastTactics 9 ай бұрын

You have two servos? Is that what you’re saying? Because most vehicles only have one servo that’s capable of turning, both left and right.

@2259chevy 9 ай бұрын

@@EastTactics yes 2 servos on my Traxxas summit 1/10 scale to steer

@2259chevy 9 ай бұрын

@@EastTactics on my tqi it has 2 spots that says ch1 both are for steering on my new radiolink there is only one spot that says ch1 ?

@nofreerides7033 19 күн бұрын

I have some issues what’s the contact info to radiolink?

@EastTactics 9 күн бұрын

Who is the best person to contact if I have technical issues with Radiolink transmitters? Each of our products comes with an instruction manual, and they can contact the email on the manual directly. The email address is after_service@radiolink.com.cn

@cacanjacowans540 Жыл бұрын

I simply drilled an additional hole in the receiver box lid then add another antenna tube

@EastTactics Жыл бұрын

With the length of the antennas, do your antenna tubes go up through the body as well? I decided to avoid going up through the body simply because I don’t want the antennas to get destroyed on a bad wreck

@cacanjacowans540 Жыл бұрын

@@EastTactics they are tucked underneath the body for my bashers. I extended through the body shell for my SR cars

@EastTactics Жыл бұрын

@@cacanjacowans540 Gotcha, makes sense

@NepDouble07 Жыл бұрын

It isn't required to run that plug for battery telemetry is it? For the v2 and v3.

@EastTactics Жыл бұрын

I’m not sure what plug you’re talking about. Can you clarify?

@NepDouble07 Жыл бұрын

@@EastTactics The JST to the xt60 connectors for battery telemetry. I thought I heard someone say you have to run that, but I tested it out earlier for myself and figured out you don't need to. Also how would you use those 3 position switches to change the throttle percentage? Do you need something plugged into that channel to do so? You brought it up in the video at 17:47. I honestly have no clue how to set that up.

@EastTactics Жыл бұрын

It is not required to run that telemetry dongle. You can choose to leave it out completely. In fact, I do not run it directly to my main battery. I chose to run it to my fan battery. But again I could’ve chose to completely leave it out as well. Regarding your desire to assign variable functions to your throttle, utilizing one of those switches. You can achieve this without doing anything unique regarding installment. Simply by installing your transmitter/receiver the regular way by plugging your throttle, and steering into auxiliary one and two is all that is needed to achieve This feat. The set up is as follows, simply go into option 13 called duel rate (D/R). Once there you’ll see a layout of all of your channels, but in the top left, you will see one called SW. More than likely that is set to Null at the moment click enter on that and change it to the switch that you want to incorporate this function. For example, SWB is the switch that is sitting in the 11 o’clock position on your controller. Once you’ve assigned sw to SWB, you’ll notice that if you toggle that switch, it will change on the screen in the top right corner from center, to down, to up, etc. depending on its position. Now from here, simply adjust the TH (throttle) to the number desired depending on the position of the switch. For example, if you want that switch to be down and your throttle to max out at 25%, then change the TH to 25. Then move the switch to the center position and keep it at say 100 for full throttle. Then move the switch to the up position and assign it to say 50% (50). Now when you leave that setting for the duel rate (setting 13) where the SW (again top left option is that to SWb). And then back out, you will notice that whenever that switch is in those different positions your throttle will follow suit. Let me know if that makes sense, if not, we can set up a time where perhaps a phone call could be in order and I can help walk you through it

@NepDouble07 Жыл бұрын

@@EastTactics This explanation is what I needed, I get the procedure. But if I have any trouble getting it to work I'll let you know 👍👍 thanks a bunch.

@EastTactics Жыл бұрын

👍

@FORD150-5.4 Жыл бұрын

Now is flashing green I presst the bind button and still not want to bind ?

@EastTactics Жыл бұрын

Sorry, I’ve been busy working my regular 8 to 5. Have you confirmed that your jst connectors are plug-into the place and facing the right right direction?

@FORD150-5.4 Жыл бұрын

@@EastTactics yeah that was the problem i fix it now is bind but I have steering but throttle don't work 🤦‍♂️

@FORD150-5.4 Жыл бұрын

@@EastTactics now the trasmitter pair the steering working but I don't have throttle 🤦‍♂️is always something

@EastTactics Жыл бұрын

Sounds like it could be a setting on the transmitter, or perhaps, check your throttle endpoints. There might even be a switch or toggle that is not set correctly. With this transmitter, you really got to take the time to read the instructions and understand how to adjust things like throttle, dual rate, etc. be sure not to skip around in the video as well and just try to absorb everything you can because I cover a lot of these topics.

@johnnelson1243 5 ай бұрын

you can turn gyro off with a mix

@EastTactics 5 ай бұрын

Yes by setting the gyro to that knob, you can adjust it from 0-100% on the fly

@rgzrc3056 Жыл бұрын

Got mine and it's saying RX low power and won't do anything

@EastTactics Жыл бұрын

How are you powering the transmitter? Are you using the classic AA batteries? It sounds to me like they must be way too low on power. Try replacing all of the batteries with brand new batteries. Let me know.

@ModModRc 3 ай бұрын

You say about using the switches for fans & lights, it not that straightforward, we cant connect 2 cables to a CH & use the switch, they just stay on. We have to buy a Led on/off electronic reciver switch & use it for Any kind of addon like fans. For buttons to work they need the electronic switch with 3 wires you then plug your 2 wire leds/fans in to it then into a channel. i think this is stupid, iv just ordered the new dumbrc radio it uses FHSS like radiolink & some of the other dumborc recivers wich are compatible look identical to the radiolink link, hope they work iv loads of radiolink recivers & im sick of the braking the radiolink ariel

@EastTactics 3 ай бұрын

I was under the impression that if you assigned a light or a fan etc. to the appropriate position in the receiver. You can then within the settings on the transmitter change it so that it can be activated in on off setting or it could be set up to be activated while holding the button down, etc. I however, have yet to actually set up a light or a fan on a specific unused channel, but will likely in the near future.

@chiccoka Жыл бұрын

i would live to use the telemetry ,but unfortunately i got everywhere dean t plugs. Bad luck

@EastTactics Жыл бұрын

So as you may know I communicate directly with Radio link. And this is actually a topic we've discussed. I have a private video, that can only be view if you have the link. Its a video I sent to Radiolink to view to help give them suggestions regarding ways to facilitate telemetry to their fan base. It might be useeful for you to watch. hope its helpful kzfaq.info/get/bejne/m-CGpMx-nK3Dqpc.html

@SageTwo Жыл бұрын

I wouldn’t put lipo in my controller, I already have to much lipo responsibility lol

@austin515 Жыл бұрын

After three uses my throttle trigger does not return to center. Going to have to give this controller a one out of five stars. Edit: The company is sending me a whole new unit. Told me not to even bother sending back the defective unit.

@EastTactics Жыл бұрын

Sorry to hear the difficulty brother, in my experience, this things been amazing, and I’ve never seen a bad review land yet in all of my videos on the topic over this last year. To me, it sounds like a potential one off issue you’re having which I might suggest simply reaching out to radio link, I’m sure they’d work with you if there is a defect. Another thing to consider …being that this controller is literally programmable in every function is doing a factory reset to get everything re-centered, or specifically looking into your throttle settings, which could be fully adjusted to either counter the issue or remedy it. Also, you might set your throttle endpoints on your ESC, just to be sure, that’s not the issue after installing a new receiver and transmitter

@austin515 Жыл бұрын

@@EastTactics I would have sent it back to Amazon and exchanged it. I use the power wire from the battery box on a lipo. Emailed radio link and explain the situation. They are sending a whole new unit to me. Told me not to even bother sending back the defective one. That's pretty solid.

@EastTactics Жыл бұрын

4sure!

@user-tn4dr6ig2u 4 ай бұрын

🤔🤔🤔🤔🤔🤔🤐

@thomasboales7997 Жыл бұрын

Those fan covers...... 💦🥵

@EastTactics Жыл бұрын

One of the luxuries of running over powered fans, you can get away with custom covers that may not necessarily be as efficient as others

@FullPayGaming Жыл бұрын

I have the RC6GS V2. How do I set up different throttle rates?? Like Arrma Vehicles transmitters. They have 50%,75% and 100%. Lets say the 3 tier switches on that transmitter, how do I set center point to 100% throttle and left and right points to 50% n 75%? Is it possible?

@EastTactics Жыл бұрын

Yes, this is possible.. You’ll do this in the D/R setting area. That stands for Duel rate. You can change the dual rate for the throttle on any one of the switches. So in your case you would probably want it to be assigned to one of the two three tier switches, found at 11 o’clock and 1 o’clock. I assigned mine to the three tier switch in the 11 o’clock position, And on the V3 they’ve set that Switch to be called SWB. There’s a chance that it might be different on the V2. Anyway once in the D/R setting, the top left quadrant is the one asking you which switch you are going to change. You’ll know you’re on the right one if physically toggling the switch changes the display in the upper right corner of the screen from displaying the words, left, center, right. Anyway adjust the throttle (TH) to a different number for each position. That’s it. If this doesn’t make sense, you can reach out to me via Facebook and we can connect perhaps even via the phone. I do plan on dropping a video shortly that will explain this, And many many other things regarding deep dive on the settings.

@FullPayGaming Жыл бұрын

@@EastTactics Appreciate the detailed response. I was thinkin maybe I needed the V3, because I seen some new feature about dual rate added to the V3. Happy to know I dont. It sounds fairly simple. I will attempt to do it once I get off work later this evening. Im usually good at figuring out things once Im pointed in right direction but if I somehow cant figure it out, will comment here later. Again, thank you!

@EastTactics Жыл бұрын

Sounds good