Glad I could help

Nice 👍

Glad you like them!

The bigger and faster the car, the more critical the radio becomes. And this is a good one.

This helped me! Thanks! I didnt know they had a trade-in program. Just snagged one for $45 after shipping. V3 and it comes with a receiver! Sweet!

Yeah, antenna and form factor is definitely aged. It's really more radio than 90% of folks need

I'll do a shootout soon.

Totally agree. When signal quality is most important, this is up there.

The user interface is tough at first but it's really worth learning their system

This is a good one!!!

Flysky suffers pretty badly in the range department. Mine would always lose reception in just couple hundred feet, if that. It would just stop and sit there til i walked closer then it would start reacting again

Yup. still a contender and under $100

It's very functional. User interface and packaging is not modern but it works well

Glad it helped. The two antenna wires can be extended in different directions if one wants the full 600m range. Otherwise, not a big deal where they're placed.

Hi, just keep antennas as straight as possible and keep the two antenna in 90° angle to install, we will update our user manual soon.

@@Radiolink_official what is the latency rating on this radio? Curios because I would be using this in a racing environment with high speed high voltage digital servos.

Hi, rc6gs v3 also can be switch dual-rate funtion by one button, and with timer function, 6 channels up to 7 channels.

true, true.

12ms is what the recievers specs say. Nobody has done an accurate latency test on this. I looked all over for a video.

Hi, two of antennas can be output singal and telemery information, they are same, but if you use 2 of them, the signal must be stronger than only one antenna. Telemetry range and control range are same.

@@Radiolink_official Oh sweet, I didn't realize they were two way coms on each antenna. that is great.

@@HBFTimmahh No proble, any question just contact us, we will update our installation picture for you guys.

Hi, yes, we recorded you guys feedback about of the new housing, just follow our channel to get latest version in future!

@@Radiolink_official Excellent. If you're in need of feedback/improvement correspondence,I am open to such an arrangement.

@@HBFTimmahh We have new high-end RC8X now. 8 channels, full color touch screen, 200 models memory and many advanced functions, more details, go to our website: www.radiolink.com/rc8x

Solder one up yourself, just solder on a jst connector to the ESC side..

Yeah, that is a cool feature as our crawling spots can really take advantage of this.

Hi, RC6GS V2 and RC6GS V3 both have this function on menu ID SEED, you could switch your car power, but only can sent 10 cars, here is the video link to check: kzfaq.info/get/bejne/mtZmd9Wavs25mKs.html

only thing i can come up with is maybe the longer screw is incase u have like the thumb mod added to the radio as well besides just the alloy wheel

I changed my version 1 to lipo's it helps, actually I have been converting all my transmitters to lipo's anyway 🙏😎☮️✝️

Hi, you need a dongle which has DSC port, and RC6GS V3 support VRC Pro, CarX, Assetto Corsa Competizione, ect.

I have had the same dream for that surface radio for years. I am still waiting.. 9+ channel, open os that is updatable, good screen with clear menus, module for different protocols, reasonable priced receivers. I think the problem is other radio manufacturers don't see $$ to be made in an upscale surface radio market that's controlled by spektrum (not really upscale), Sanwa, and Futaba. Nearly every rc car is now a rtr with a controller, and unless those buyers buy multiple cars they don't care about another radio. And typically they get a radio from the brand car they are buying... Horizon vehicles = (spektrum) even though most horizon vehicles don't have real spektrum compatible receivers, Traxxas = Traxxas radio with plugin that allows multi models on a radio. The Chinese brand stuff is typically not compatible with anything or has combined esc receivers which means trash all the electrics, so just use what it comes with. Buyers that buy race cars (not bashers) will most likely only buy Sanwa or Futaba. For us that don't want to drop $80 to 100 on each receivers, want a radio that looks good, feels goods, has a nice menu system, and can do anything.... We have to give up something because it doesn't exist. The flysky Noble is probably the closest thing but the built in battery is a no go, and lack of modules mean at some point it will be left behind. I would keep using my ancient Futaba 3pks with a fasst module but the cheap clone receivers have become impossible to find, or they falsely claim they work for fasst C1 modules. I gave up and got a radiolink V3 just because of the radio price, receiver price, model memory, and more than 5 channels. The screen and menu system are beyond ancient (my 20yr old Futaba is better) but at least i will not have a fortune in it if the dream radio ever become reality.

@ well put. Ultimately I feel like my dream radio and control system would totally have to be a community based project like am32, elrs, openvtx, or opentx. I feel like Im just going to have to wade in and diy something. Hack up a betafpv lite radio, then build an adafruit feather based controller that piggybacks an am32 esc and elrs rx. Its all doable I just need to find the brain space to figure it all out :/

So much to discover beneath the surface. Yes the ergonomics definitely needs a fresh take.

Hi, okay, just follow our channel to get latest version in future.

Hi, I have recorded your feedback to our team, hope you will select Radiolink again!

Hi, RC6GS V3 support switch to flip end points, you could go to menu EPA to set a switch for flip. We also have dual rate funtion, you could set 1 channel as 2 different value and set a switch to change them.

Does it work on the V2 version?

@@jimmypontious550 Hi, it's doesn't work on V2 version, so sorry.

Don't feel outdated you'll be glad to have it believe me you'll probably need version 3 Anyway. I have both and I use the v1 for my cheaper trucks and v3 for my Nice rigs. 🙏😎☮️✝️

@@mypassionrc-studioxd40lous66 I know it's just kind of funny. I bought this to replace a fly sky radio I bought back in 2009

Hi, Dumborc cannot works with Radiolink's receiver and vice versa.

Any question of setting, you could contact Radiolink after sales service.

It was pretty confusing as they outlined the new stuff.

@@RCReviewChannel yea they need to change some setup features programming wise but once you figure it out its so capable and the 8ch rx has even more range but the id seed is the bomb, can drive all your rc on the tx without toching the model. And i also run crossfire with it. But i like pulling my sonic wake with my gen 8 to the creek back in the water drive the boat come back load on trailer and drive away not once touching either rc just turn them on. Soon i will have internet and post some vids. Tanks escavators etc this radio does it all.and yes i wish they just made it the 8 ch. The quality is in function and range.and its by far the most capable tx

yes, we are keep moving!

Haha, we have new high-end RC8X now, you no need waiting for V4 version. 8 channels, full color touch screen, 200 models memory and many advanced functions, more details, go to our website: www.radiolink.com/rc8x

@@Radiolink_official $450au it's not cheap...

@@levethane Hello, sir. The price is based on the quality and function. You may check the function of RC8X, which is very powerful. But it depends on your needs. If you want more functions in your transmitter, you may have a try.

2 things i dont like about my gt5 is 7.4 volt limit on the receivers wish they would least do 10v and the peracetic power draw on the transmitter when turned off

@@onemansvideos2134 great feedback. So there is draw on the transmitter when off???

@@RCReviewChannel yup I put a full 2s lipo in and if I leave it plugged in for 2 days it will drop to 7.8v so when I'm not using i unplug the lipo I've tried multiple lipos thinking it was those nope and it even does it with double A batteries....bet yours does it cause mine isn't the only one theres multiple people experiencing the issue

@@themountain59 leave on?...it's turned off...it's called a parasitic battery drain when off