8 Steps To Fixing Damp, Mould, Condensation & Humidity In Our Home

No video

8 Steps To Fixing Damp, Mould, Condensation & Humidity In Our Home

Рет қаралды 453,520

Күн бұрын

We had massive damp, condensation and high humidity problems which caused mould and mildew to grow on cold surfaces in a few rooms in our 1930s bungalow. In this video I cover 8 different things we did to resolve the issues.
Humidity sensors: 8 pack amzn.to/3VM6UZt (Amazon UK) geni.us/te0N (Amazon Worldwide)
Air Brick amzn.to/3ClxYIn (Amazon UK) geni.us/d2drN (Amazon Worldwide)
Hit & Miss Vent Small 9"x3" amzn.to/3jNgI8l (Amazon UK) geni.us/nlTL7W (Amazon Worldwide)
Hit & Miss Vent Large 9"x6" amzn.to/3idlVpy (Amazon UK) geni.us/oApzqa (Amazon Worldwide)
Mould & Mildew Cleaner amzn.to/3VOqB2T (Amazon UK) geni.us/foorjjZ (Amazon Worldwide)
Mould Damp Seal Paint 500ml amzn.to/3VLIpvB (Amazon UK) geni.us/Rr96X2 (Amazon Worldwide)
Anti Mould Paint 750ml amzn.to/3VJYSQV (Amazon UK) geni.us/TZeKpP (Amazon Worldwide)
Trickle Vents 500ml amzn.to/3ie3nFP (Amazon UK) geni.us/fnNB9p (Amazon Worldwide)
PIV (Positive Input Ventilation) amzn.to/3Im1mC5 (Amazon UK) geni.us/c6dSehz (Amazon Worldwide)
PIV with built in Hygrometer amzn.to/3WOJc0c (Amazon UK) geni.us/VyN1Oh (Amazon Worldwide)
Dehumidifier amzn.to/3GH6G1s (Amazon UK) geni.us/tTsW (Amazon Worldwide)
Bathroom extractor amzn.to/3iiieiu (Amazon UK) geni.us/SMelJ25 (Amazon Worldwide)
My Renovation videos:
Bathroom Renovation Complete 5 Part Series - Available Via Channel Membership Only
Bathroom Renovation Timelapse • Bathroom Renovation - ...
Kitchen Renovation - Available Via Channel Membership Only
Entrance Hall Renovation - Available Via Channel Membership Only
🔴My channel is supported by Milwaukee🔴
Check out their full range here: uk.milwaukeeto...
#damp #mould #condensation
Thanks for watching! Please subscribe, click like if you like, and hit the bell icon for future video notifications
🔨 MY TOOLS 🔨
For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn from qualifying purchases.
UK affiliate store: www.amazon.co....
US affiliate store: www.amazon.com...
🤝 HELP SUPPORT THE CHANNEL 🤝
Support with KZfaq channel membership: / @ragnbonebrown
Support with Patreon: / ragnbonebrown
Support with PayPal paypal.me/ragn...
Shop With Amazon using my affiliate link: geni.us/iWD3K
💰 SHOP 💰
Etsy: www.etsy.com/u...
teespring.com/...
🎧 WORKSHOP BANTER PODCAST 🎧
/ workshopbanter
Also available on Spotify, Apple, Google and most other podcast platforms
🔗 LINKS: 🔗
Website: www.ragnbonebr...
Facebook: / ragnbonebrown
Instagram: @ragnbonebrown
Twitter: / ragnbonebrown
Email: ragnbonebrown@gmail.com
Second KZfaq Channel (non woodwork videos): / keefykeef

Пікірлер: 531

@RagnBoneBrown Жыл бұрын

Humidity sensors: 8 pack amzn.to/3VM6UZt (Amazon UK) geni.us/te0N (Amazon Worldwide) Air Brick amzn.to/3ClxYIn (Amazon UK) geni.us/d2drN (Amazon Worldwide) Hit & Miss Vent Small 9"x3" amzn.to/3jNgI8l (Amazon UK) geni.us/nlTL7W (Amazon Worldwide) Hit & Miss Vent Large 9"x6" amzn.to/3idlVpy (Amazon UK) geni.us/oApzqa (Amazon Worldwide) Mould & Mildew Cleaner amzn.to/3VOqB2T (Amazon UK) geni.us/foorjjZ (Amazon Worldwide) Mould Damp Seal Paint 500ml amzn.to/3VLIpvB (Amazon UK) geni.us/Rr96X2 (Amazon Worldwide) Anti Mould Paint 750ml amzn.to/3VJYSQV (Amazon UK) geni.us/TZeKpP (Amazon Worldwide) Trickle Vents 500ml amzn.to/3ie3nFP (Amazon UK) geni.us/fnNB9p (Amazon Worldwide) PIV (Positive Input Ventilation) amzn.to/3Im1mC5 (Amazon UK) geni.us/c6dSehz (Amazon Worldwide) PIV with built in Hygrometer amzn.to/3WOJc0c (Amazon UK) geni.us/VyN1Oh (Amazon Worldwide) Dehumidifier amzn.to/3GH6G1s (Amazon UK) geni.us/tTsW (Amazon Worldwide) Bathroom extractor amzn.to/3iiieiu (Amazon UK) geni.us/SMelJ25 (Amazon Worldwide)

@MikeWerndeg 11 ай бұрын

The ideal humidity range is NOT 30-60% RH - If you have 30% RH ( desert levels ) and you spend the majority of time in that environment you will have dehydration in a very short time, this level of dehydration will dry up your sinus membranes and leave you wide open to all sorts of infections in the nose throat and lungs. The ideal range is more like 45 - 60% RH. Short periods between 60- 70% are OK especially with moving air ventilation. You have done a great job of your house and showing people sensible ways too reduce excessive RH. Humidity sensors can be checked for accuracy, cheap ones can be wildly out. Do a search for calibrate hygrometer. It can be a difficult balancing act in the UK. Winter is NOT the cause of the higher humidity you experienced as cold air is much drier than warm air. It was the heating being on in a DAMP environment, warm air carries and allows a far higher moisture content than cold air. The extraction fans in kitchen and bathroom are by far the most important element of the work you are doing and MUST be used all the time in older less well insulated properties. The PIV is also useful in many situations in the cold winter the air coming in will have lowish RH and when that air is heated it will become even drier. Air MOVEMENT is key to many problems with even just a simple fan moving the air around can help a great deal and at far less cost than a dehumidifier. Dehumidifiers are EXCELLENT at dealing with high RH but as you say they are now becoming expensive to run because of our governments INSANE energy policies and the sheer greed of the corporations and their shareholders. You often see mould on the top of walls where they meet the ceiling as warm moist air can sit there where there is a cold bridge, this then condensates creating the mould. again this is where the simple movement of air with a fan can prevent this from happening. Also ALWAYS allow a descent gap between furniture and the walls including BEDS etc a descent gap is around 6 inches. Your cats are lovely too :-)

@woody1380 9 ай бұрын

Should have made a video

@SIC647 9 ай бұрын

I for real screenshot your comment. Thanks man.

@mogzofanarchy2969 9 ай бұрын

@@SIC647 So did I😆.

@mogzofanarchy2969 9 ай бұрын

Awesome info. As Woody1380 suggested, you should have made a video👌🏽.

@captaingorgeous685 9 ай бұрын

I agree with the other guys.please make a video

@cg3205 Жыл бұрын

If anyone has an old 'period' property, bear in mind that these house often become damp because owners/builders with little understanding about how older, and often natural/more eco building materials function, or rather cease to function when things like Gypsum and petro/plastic based finishes are introduced. I live in a solid granite cottage built in 1870 in Cornwall where outside humidity is incredibly high all year around (it rains alot here and is by the sea). I've been correctly restoring it using lime mortar (and linseed based paints for external joinery) and the levels of humidity inside never go beyond 60% - much to the amazement of every tradesperson who has set foot in the building and comment about how dry it feels/is compared to many other properties they've entered down here. Essentially spaces, old or new, need to be able to 'breathe'. Most general builders sadly have no understanding of older properties/materials, often writing-off the latter as simply outdated. Every building is different, but one thing is simple: Maintaining constant background heat, and extracting excessive moisture close to the source is key for a healthy building. Good work Keith on sensibly tackling your problems given the specific fabric of your property :)

@user-qr7fb2ii4q Жыл бұрын

I am not very knowledgeable in this area but this is my kind of thinking (as I have been reading/researching on the subject): dealing with issues as close to the source as possible! Many thanks and regards.

@Tamara-xp9nx 11 ай бұрын

We have a constant leak from upstairs neighbours that can’t be fixed because it’s an old ex council building. What would you say is a good thing to use apart from constant painting and dehumidifier

@SA-vz7qi 11 ай бұрын

@@Tamara-xp9nx Is the building freehold still owned by the council? They should be fixing that.

@cg3205 11 ай бұрын

A leak needs to be fixed at source. No amount of painting or running of a dehumidifier, will help with a leak. @@Tamara-xp9nx

@Ida-Adriana 9 ай бұрын

Who can afford to run constant background heat?!?! I’m in Shetland where apparently most of us are in fuel poverty.

@jibibailsbrt290 Жыл бұрын

Great book for a beginner . kzfaq.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ this book really starts from the beginning, as in it explains what basic tools are and how to use them. But when it gets to the art of creating joints and how and when to use them this book really starts to teach you something. At least that was my experience.

@frederickwood9116 Жыл бұрын

The dehumidifier for the laundry is a game changer. It’s incredible how every house in the UK and Ireland hasn’t got one for general use and laundry. Humidity management is something that requires a little self education for most of us. There is a mind change needed to understand that heating clothes just puts the moisture into the air. It’s not actually removed. I’m very intrigued by your attic air recirculating system. Thanks for the video.

@gpo746 10 ай бұрын

We bought a Miele Heat pump tumble drier. It costs about 15p to do a load and takes ALL the moisture out of the clothes and puts it into a tank which can be easily removed like a soap drawer and we put the water back into the washing machine to do a dirty load , when doing towels we can pull about 2 liters of water from 4 bath towels and a couple of hand towels . It probably costs more to run the dehumidifiers for a few hours a day /several days a week . Before that we had a sh*tty White Knight mini Tumble Drier that just turned one way and the clothes were always wet/damp in the middle and cost a WHOPPING 85p a load !! (this was reliably checked using our kill-a-watt meter) The moisture from the white sh*te drier was unreal , all the walls and furniture felt wet and humidity was at 85% .

@anyat686 10 ай бұрын

Yes. Id wouldn’t even think about drying clothes inside the house. Tumble dryer all the way !

@zaxmaxlax 9 ай бұрын

If you need a dehumidifier to dry yout clothes it already means your home is too humid in the first place, better to use a dryer

@Smithb83 9 ай бұрын

@@gpo746I'd like a heat pump tumble dryer but we only have room in the garage, apparently they need 10 degrees to operate properly. Might have to get a condenser for now (they too require 3 degrees plus but have read many people have then in garages/sheds for years with no issues)

@midgeman90 8 ай бұрын

Superb comment. With a portfolio of 500 properties, calls start coming in from tenants like clockwork in October, as the temperature drops and people start sealing their homes up. We spend the next 6 months educating tenants on how to control moisture levels. Most the time it is in one ear and out the other; extremely frustrating. It's not even their fault; they are normal people, leading normal lives, doing normal things, in a normal home, they are just ignorant of the issues surrounding humidity. Part of me thinks all rented homes should have an air circulating system installed, or at least provide a dehumidifier for tenants to use.

@davebethell1 Жыл бұрын

Great tips and advice. Our home is a solid brick wall construction (with no cavity), and we constantly have issues with high humidity, which is never below 60% with the windows closed, and up to 95% in bathrooms. The best method to tackle this is to have good ventilation. We can drop this figure down to 40% if the windows are opened, letting in fresh air. It may seem a waste of energy to open windows, losing all the heat in our homes, but it does work and is the easiest 'fix'. The massive issue of high humidity, mould, damp and associated health issues are our own doing. As homes have become less draughty, with efficient heating and insulation we have created a massive problem.

@midgeman90 8 ай бұрын

Great comment.

@PaddyDoc Жыл бұрын

Given the recent death of the poor young wee lad, due to mould contamination, these hints and tips are a timely reminder of the importance of clean fresh air within family homes. Let’s home hope now legislation can be passed into law to make landlords implement measures like into homes everywhere as, invariably, it’s usually the poor and needy who are most at risk from these dangers.

@RagnBoneBrown Жыл бұрын

Hear hear! Thanks Paddy 👍

@loftyboy Жыл бұрын

First of all, I carry out home renovations in my Compamy PJ Renovatins Ltd and understand the problem of humidity in the home. I live in a 1960s 5 bed bungalow in the St Andrews area of Scotland and was suffering the same humidity problems as yourself. A reduction in our heating programme has made our condensation problem worse. Like you, I monitored humidity levels throughout the house, which was around the 70 -80% level. Did some research on ways to combat the problem. I have done almost the same as yourself and now have humidity levels around 55 - 60%. By far, the biggest game changer was installing the Positive Inlet Ventilation. Although it has a heater, I'm a wee bit loath to use it as we are still trying to find a daily base level of energy usage. Once I have achieved that, I'll start adding on various electrical appliances, including the PIV heater. The other appliance that has had a huge influence has been the dehumidifier, which was on the scene before the PIV and is now being used to dry our washing in conjunction with a reduced usage of our fairly new tumble dryer. Finally, to conclude, the one action that I would recommend that has had the biggest effect has been the insallation of the PIV. Hope this feedback helps.

@ryanm9838 8 ай бұрын

I live in a very humid area in Wicklow, Ireland, often 90% humidity outside or more. Had lots of mould issues and what solved it was installing a MVHR system. Took a few weeks but the humidity now hovers around 50% - from what it used to be at 75% on average. Its a ventaxia system, bought all the pieces myself and not to bad to install if your handy

@martyc5674 6 ай бұрын

Hi Ryan- did you install single room units or a unit in the loft piped to different rooms(I’m in damp Ireland 🇮🇪 😂)

@slashingbison2503 Жыл бұрын

I have high humidity in my Victorian property 9soldi brick) , these are great tips. I've been on the fence about a PIV. Our values fluctuate on a good day 40-50RH to bad 77 RH all over We have a bit of a perfect storm in our house; 1. Downstairs bathroom with no extractor 2. No kitchen extractor 3. An always cold north facing extension (where all the condensation channels as the walls are cold - this has a dehumidifier running 24/7) 4. Gypsum plastered walls 5. Non breathable exterior paint Venting air in from the outside is the best thing you can do besides fixing the issues (we are sorting ours, extractors etc)

@NastyRhythm Жыл бұрын

Just had the Nuaire Eco Heat fitted yesterday and already I have noticed the difference. Our little digital sensors were showing humidity levels of up to 90% on some days especially in the bedroom. It has managed to get it down to low 60s now..really happy with the results so far

@8282-rob Жыл бұрын

I installed a MVHR in my 60s bungalow, complete game changer, bungalow sits around 40% humidity in the winter. I can keep the whole bungalow at 18 to 19° with only the wood burner, the system moves fresh, warm air into bedrooms that used to have condensation on the walls!

@BushmanOutdoors Жыл бұрын

I think MVHR is the gold standard. Bet it was expensive though. Perhaps PIV could be a decent second place that’s more affordable.

@dawnlee6742 9 ай бұрын

Do you have the wood burner on many hours a day?

@bryonysays Жыл бұрын

I'm also in Norfolk, live in a 2 story, about 40 year old home and it's at about 42% at the moment (evening) but I do get some condensation and mould, if not frequently cleaned, at the windows in the mornings. I do like it warm (about 22C) during the day though, so that dries it out. The problem you may have is you are inviting outside air to come in, and outside air at this time of the year is quite moist, and cold. I'm glad your mould problem is sorted though.

@Paul9 10 ай бұрын

Great tips, I have a problem cupboard and really need to look at putting an air brick in. A big thing for reducing the humidity in our house was addressing the small things that add up. Keeping lids on pans, squeegee the shower after use, keeping the bathroom door shut for a while after a shower. Also educating myself on how relative humidity works and airing the house out at the right times.

@louissherwood5221 Жыл бұрын

I'm in a 60s bungalow just a slightly smaller footprint to your place and also have a constant battle against humidity. We average around 70% and I have a bit of a mould problem in the kitchen, I tend to keep a window open a crack all the time in there, when it gets bad I have 2 open and that tends to clear it. Extractor in the kitchen but none in the bathroom, just a top opener for the bathroom. I found a window vac really helps after showers, found that out from Charlie DIYte's channel. I also use the window vac for window condensation in the kitchen and living room. In winter it's a constant struggle, we're just about to get the loft converted which has a huge 3m ceiling height at the roof ridge and around 50m^2 floor space, so hopefully that'll help with air circulation... very interested in something like your PIV system, but without a loft space what options are there?

@ShieTar_ Жыл бұрын

I was astonished to hear about this. Living in the sourth of Germany, in a second story flat, i am constantly fighting the opposite problem in the winter: If I just heat normally, humidity will very quickly drop below 40%, and then I spend all winter just coughing all day long since my lung will dry out. So I have evaporators on all the radiators, I do dry my clothes inside, I keep the doors of the bathroom open so the humid air can get to the rest of the flat and so on. I even have an electric humidifier for the especially cold & dry days.

@rogerneumann8105 Жыл бұрын

Very interesting indeed - same situation in New England, in the USA. We have 3 evaporators and most folks have evaporators or ultrasonic misters to in increase humidity in the winter. In summer we are trying to either dehumify or run air-conditioning to drop the humidity, making the heat more bearable

@HenrihsAhmadejevs Жыл бұрын

Pretty much the same story in Latvia, where most buildings are well insulated. Cold dry weather = dryer air. But in the UK it’s cold and wet, thus higher humidity. Hardly any brick houses are insulated properly, which I hate as I now live in England:)

@boobrowsky Жыл бұрын

seal your windows and outside doors

@Smithb83 Жыл бұрын

That's really interesting! As we are constantly battling high humidity (in summer the basement is a problem solved by dehumidifier) it didn't even occur to me that others could have the opposite problem

@HenrihsAhmadejevs Жыл бұрын

@@boobrowsky It doesn’t really help much as the main problem is thin exterior walls and sometimes even single glazed windows.

@grobifarnsworth Жыл бұрын

Our rooms average around 40-50 percent humidity pretty much regardless of outside weather. We live in a three-storey 1950s semi-detached house in one of the rainiest parts of Germany (other than the coastal areas). Outer walls are single-shell brick about 300mm thick, windows and doors are on low early 90s standard (my parents cheaped out when they renovated the house). No problems with mold at all which I am eternally grateful for.

@chrisbradshaw7273 Жыл бұрын

Remember it's 'relative humidity' so if you increase the room temperature the humidity will decrease. I noticed readings of 15C and 13C, which to me is cool and I'm not surprised you're having issues with condensation and mold. If you increased the temperature of the room to 20C the relative humidity would decrease.

@mikeharper1102 Жыл бұрын

You offering to pay for the heating? 🤔😉

@doubleedgedsword6352 Жыл бұрын

@@mikeharper1102 Keep it at 15c, or replace electronics after a year or two, it pays for itself!

@cedarstuff Жыл бұрын

Yeah, anything under 15C isn't healthy. Would suggest keeping 16C min.

@MrSmid888 Жыл бұрын

High temperature will not disperse moisture in the air. Cool air will. No cold air circulation. A PIV solves all issues (apart from in wardrobes)

@midgeman90 8 ай бұрын

@@mikeharper1102 I think this is a contributing factor to mould/condensation/humidity issues people experience; with increased energy costs, people just don't heat their homes properly. They are happy to spunk money on many frivolous things, but God behold they should spend some of their money on heating their homes, how dare they have to do this...

@thelovett4282 Жыл бұрын

I fitted a PIV unit into my 2 story house just before Christmas, we were getting condensation and mold growth everywhere! even bought one of those window vacs. Fair to say that the PIV unit has been a literal godsend and dropped our humidity from average 80% to 55%. for about £350 the PIV unit is well worth the investment and really easy to install.

@AlexPlym06 Жыл бұрын

Is the air being pumped into the upstairs or downstairs (or both)?

@thelovett4282 Жыл бұрын

@@AlexPlym06 Its just above the landing, so the air gets circulated as its in a central location.

@Divinefemininemiracles 9 ай бұрын

Hi where did you buy your piv are you still happy with it? Was it an easy install? Thanks v mich

@jameshowarth2516 9 ай бұрын

I ended putting 2 x PIV units from NuAire in my period Cornish 3 level house. As I complained to the manufacturer after 12 months that whilst it had bought down humidity, it was still 55 - 75% most of the time. They said as I had a typical sprawling Victorian house the 1 would not do the job as it wouldn't work its way around. Now I have 2, one in the downstairs extension and another in main loft. I also have 2 dehumidifiers running 24/7 one in the basement and one upstairs. Typically humidity is now around 60 - 65% and we fitted 3 humidity sensor extractors 2 in bathrooms and another in the kitchen. I also find the RH is typically higher in the summer than in the winter. Warmer summer air holds more moisture than colder air - worth a look at Peter Ward (expert old property man) - vid on condensation - kzfaq.info/get/bejne/o5tkltx8p5fLlnU.html He has a ton of good stuff on his pages. Sadly my place has been cement rendered all over at some point in the past, painted with modern paints and plastered with modern plaster inside, so far too much expense to resolve

@Divinefemininemiracles 9 ай бұрын

@@jameshowarth2516 ok isnt it expensive to run two dehumidifiers 24/7 I don't use mine much currently due to electric prices. Without my logburner lit my humidity is between 85 and 95% looking for solutions.

@Bas-G Жыл бұрын

I went the other approach. My house double brick from the 1890s. It'll be impossible to fully seal something like this, but we got a huge improvement with a few dozen cans of spray foam. We're planning on doing a lot more next year to get the R ratings up. Instead of letting unconditioned outside air in, we have a vent on the furnace/boiler with a heat exchanger, so we aren't sucking in damp air, and dumping out conditioned, heated air. And I'm running a dehumidifier in the basement. We have radiant heat, so no vents unfortunately to circulate much. But I have an ecobee zoned system with sensors in most rooms, and we're usually in the mid 30% and on rainy weeks in the 40s.

@ice4142 Жыл бұрын

To clarify the air in his loft is unconditioned but it is not damp, relatively speaking, just cold. The ability for the air to hold moisture increases with temperature. So in the winter the outside air has a high relative humidity because cold air cannot hold a lot of moisture and feels damp but actually has a low absolute water content. The warm air in houses can and does usually contain more moisture which is why the general advice is to open windows for a bit in the winter to let cool dry air in.

@neilheslop5786 Жыл бұрын

Great video. We also have a similar 1920’s bungalow with several extension. We had awful condensation & mould problems for years until we got a PIV fitted much like the one in the video, we have the newer model that has a heater. The difference was noticeable almost over night. The house felt much fresher and dryer. I would definitely recommend to anyone with similar issues.

@jeffcobb8151 10 ай бұрын

How much was it?

@dawnlee6742 9 ай бұрын

Is your bungalow solid walls no insulation?

@neilheslop5786 9 ай бұрын

@@dawnlee6742 yes it was solid brick with no insulation when we got the PIV fitted. We’ve since had external wall insulation fitted but still have & use the PIV.

@neilheslop5786 9 ай бұрын

@@jeffcobb8151 £400-500, fitted it myself, it’s a pretty easy job if your competent

@dawnlee6742 9 ай бұрын

@@neilheslop5786could i please ask was it nuaire or vent axia you went for and was this home based in uk?

@paulhelvie972 11 ай бұрын

As a few have mentioned it’s relative humidity so your room temp will have a bearing in this. I live in a brand new built house but after the first year wanted to paper a few rooms so bought these hygrometers to give me an idea of humidity in the rooms to be papered as I didn’t want the paper to start lifting especially in the main bedroom as the en suite had no openable window. What I noticed was that only during the summer it drops below 60 but in winter hangs around or above that mark. I think you’re doing very well just above the 60 mark for such an old house.

@ianvicedomini2648 Жыл бұрын

Living in a council house like ours (the wife and I) we do suffer with damp and mould but I tried a trusted solution by dulux which is a sealer paint and I have to say I was doubtful and reluctant to trying it as they can give off rather strong vapours but after about 2 hours it dispurses out of the window and two years on, it hasn't made any sign of coming back. It wasn't cheap but it was thankfully effective lol. Great video Keith 👍🏼👍🏼

@Paul-XCIV2 Жыл бұрын

I don't have one but the ultimate ventilation solution is MVHR (mechanical ventilation and heat recovery).. essentially you have an in and out duct into the ceiling on each room and it draws the stale air out and exchanges with fresh air from the outside and also recovers the heat whilst doing it. They also come with filters so you can stop pollen etc being pumped into the house.

@lafamillecarrington 10 ай бұрын

MVHR seems to be the only way to get adequate ventilation and minimise your carbon footprint.

@Woodkin007 9 ай бұрын

It only works in modern sealed houses. You're just not going to get it in most older built properties.

@Shriven89 9 ай бұрын

@@Woodkin007when you say old, what age are talking? I have 80s ex council place with modern uPVC doors and windows. Upstairs rooms sit at around 85% in winter!

@Ida-Adriana 9 ай бұрын

@@Shriven89You can ask council to insulate it, or look up the grants for insulation. Then use the MVHR combined with high insulation and air tightness. This would lower everyone’s bills by a lot!

@sarahbarnes942 10 ай бұрын

I live in a bungalow, small, that felt very damp to me. I put one small dehumidifier, Probreze, in the bedroom, which also has a trickle vent in the window, and another in the living room. They cost around £80 each, and are one of the best things I have ever bought! End of problem. Each one can collect nearly 1 litre each of water a week, and they run 24/7 winter and summer! I dry my washing indoors, usually with a little window open a bit, or the kitchen extractor fan on. Usually I have the little bathroom window open a jar just a bit, and with a min temp of 18C in the house, this keeps the damp away. Currently my humidity reads 59% which feels comfy. Am also looking forward to the housing association tackling the roof leakage!!! Which should also help!! Great tips on your video, thank you 😁

@beirtipol Жыл бұрын

We've an 1890's house that's draughty as hell. While we don't have a humidity issue, we do have a big issue with heating it. I invested in wireless radiator valves (Netatmo) and it's drastically improved how quickly we can heat the rooms we want to keep warm. They can be a pricey outlay but I think they've paid for themselves over the years. I've also set up a geofence so the heating automatically switches off if we leave home, cutting bills even more.

@jennoryan6838 4 күн бұрын

I love your cats in the video! Lol! I’ve had issues with mold in apartments and want to build a home one day this is great!

@TheCr3amShow Жыл бұрын

You have to remember that Relative humidity is based on air temperature. If you are getting 60% in a cold room, that will rapidly drop if heated. What temp is the room that you are taking the 60% humidity reading? I have a workshop that sees 80% humidity due to it being cold. However, when I heat the room, it drops to 50%.

@Monaleenian 10 ай бұрын

Using relative humidity is nonsense really. People should be using dew point

@MrFrobbo 7 ай бұрын

@@MonaleenianI've also been thinking this. What's the point of RH meters if they do not compensate for temperature? I.e 90% at 25c is not the same 'wetness' as at 5c? I'm confused

@megmarlow8984 Жыл бұрын

It’s very reassuring to find it’s not just us struggling with bungalow life. We’ve lived in a 1970 bungalow for seven years and this year we’ve tried to reduce using central heating resulting in condensation and mould. We’ve bought a dehumidifier. And are planning on new windows. But I feel like it’s a battle zone 😏

@Acheiropoietos 9 ай бұрын

We have moved into a 1930s bungalow this year, we have solved rising damp with an external trench with extra air bricks and a PIV system, so much better. Still a bit of condensation in a north facing bedroom, but we’re thinking about an extra extractor for that. Good luck! ❤️

@midgeman90 8 ай бұрын

This will most likely lead to further mould. You need to find a balance between venting and heating, and keep the ambient temperature as stable as possible. Large fluctuations in temperature is bad.

@sarahlewandowicz7696 5 ай бұрын

Thankyou soooo much. Just bought my next home and was slightly traumatised when I saw what was hiding behind the built in wardrobe. 😅 This gives me a lot more confidence and hope. Many thanks.

@RagnBoneBrown 5 ай бұрын

Thank you

@NiallOCallaghan Жыл бұрын

Interesting video, thanks for the link to the cheap little humidity monitors! We had a home energy survey done and the biggest recommendation to tackle humidity. The two suggestions were interesting. One was Negative Pressure Ventilation with a unit in the attic connected to the kitchen and bathroom. The unit would increase power in response to higher humidity levels. A different take to the PIV method, but might be a way to reduce the chill you mentioned that was coming in with the PIV. The other suggestion was to use mechanical vents like your air brick, but ones that have a humidity-responsive valves. So when there's high humidity, the valve opens up - no power required, which is a cool concept!

@paulacollins8327 Жыл бұрын

We have found that using a squeegee on the walls after showering has meant the extractor fan is on slightly less, seems to help

@davewright9312 10 ай бұрын

The most effective way is just to open the window in the bathroom / en suite for ten minutes after showering .it totally clears any condensation even in the middle of winter...no messing about with a squeegee..

@shivgohil1972 10 ай бұрын

And a good wipe once a week to protect tiles

@Mantras-and-Mystics Ай бұрын

I'm from Queensland 🌴 🌞💦and with the humidity this place just breeds mould. Thank you for your help!

@shakinroom2936 9 ай бұрын

The best advice I've seen, we have a large bungalow and all those issues are present. I'll work through the list. Thanks

@danielwolley1461 Ай бұрын

Brilliant advice, thank you. I also live in a bungalow and suffer from the same issues.

@nathanlucas6465 Жыл бұрын

We're in a 30s semi with 9" thick solid brick walls. We've got a decent bathroom extractor, winter clothes drying is now done in a heat pump condensing dryer which is fairly cheap to run (around 35p per load at current prices) and there are still a couple of places in the house that are a bit damp - under the stairs and the built in wardrobe thats above the stairs. I tried running a loop of central heating pipe around the wardrobe, hoping that it would put enough heat in to help, and put a false wall in so the heat would cause a convection current up the wall. My next plan of attack is going to be treating the outside of the wall (currently just rendered and pebble dashed) with a water seal product and see if that helps. Ideally I'd just build a garage along the side of the house which would keep the rain water off the wall, but thats out of budget at the moment

@lazygardens Жыл бұрын

"My next plan of attack is going to be treating the outside of the wall (currently just rendered and pebble dashed) with a water seal product and see if that helps" BAD IDEA! You are getting condensation and high humidity because stagnant, damp indoor air is condensing on the colder outer wall, not because water is penetrating from outside. Eventually the damp evaporates out thru the wall. If you seal the wall, the condensation will happen at the junction between render and pebbledash and damage it. Figure out ways to increase air flow through those areas - Vent the wardrobe at the top, vent up thru the wardrobe from the below-stairs area, use extra-quiet 12V computer fans to move air out the top of the wardrobe.

@gavinberry1796 3 сағат бұрын

The comment that outside air will be dryer than inside air may be true for centrally heated homes, but the maths are not so simple - rule of thumb for typical temp ranges is: if you bring in air and heat it up, the humidity will drop by about 10% for every 2C - in other words, if inside humidity is 20% less than outside, and temp difference is less than 4C your bringing in more water per cubic meter of air than the inside air has, and vice-versa

@grahamalexander7230 Жыл бұрын

Hi Keith, My daughter had a similar issue with her 1930s bungalow so I fitted a PIV made by nuaire a very similar system to yours but having the option to turn on a heat element if required, with in a couple of weeks the humidity dropped from 75% to below 38% in all rooms but the dining room for some reason, a quick phone call to their tech people who suggested I drop an additional 100mm hose line into the dining room but coupled up to the main unit in the loft, two weeks after that the humidity in the entire bungalow dropped to an average of 30% but this may have been aided by new windows complete with builtin trickle vents which the previous ones did not have. So I think the PIV is a great staring point but you can add in additional room vents as long as the rooms dynamics allow. Great video by the way as ever! Graham

@jenniferdoyle3969 10 ай бұрын

Can I ask you if had any issues with the piv unit causing an attic smell in the house? I've had mine a week and the whole place smells.

@grahamalexander7230 10 ай бұрын

@@jenniferdoyle3969 Hi Jennifer, No I’ve had no issues you describe at all. I have also fitted units to friends homes inc a flat and all worked fine no smells at all. I would suggest if someone can get into loft and do a thorough check to see if you got an unwanted guest. Also check the area around the main unit for major dust etc, when I fitted them I always vacuumed around the surrounding area to minimise dust, then I would contact Nuaire’s I’ve always found them really helpful for ideas etc. Just an if thought does it smell like rubber / plastic. If so check wiring to the unit just in case, the heater element in the unit does not draw much current but if it’s not wired in correctly or dust / insulation has found it’s way onto the element it might cause the issue. Finally if a company fitted it get them back to sort it! Hope this helps Graham

@paulwilson1555 9 ай бұрын

One thing I did read about a PIV unit, is that for it to be affective, you need around a 10mm gap under each door for the air to be pushed into the rooms, where as our current house is a modern three story build with building regulations firedoors, which are fitted with no gaps to stop smoke entering rooms in the event of a fire...

@colinchick2692 10 ай бұрын

I live in mid wales and the humidity outside is often well over 90%. We therefore do not open the windows - it may circulate the air but the air coming in is so wet that we find it counterproductive. We also delayed on purchasing a dehumidifier due to running costs but it was transformative I wish we had one sooner. Like you we rarely get the humidity under 60% but it does stop mold, mildew and condensation - which was the main aim. Good video with many tips.

@mikekemp786 Жыл бұрын

I'm about to move into a 1900's mid-terrace, so this video will no doubt prove invaluable!

@mamanoodleses8880 8 ай бұрын

Thank you for this video. I’m in a 50’s council house and the mould that starts when the seasons get cold is unreal… I’ve already made some of the changes you’ve suggested before watching this video and bought hygrometers (I have reptiles so I buy these in bulk anyway!) and will be putting them up today. It’s interesting that having the windows open for 20mins can make a difference. De moulding AGAIN today and thanks to you I have more things to try. Hoping that this will end the mould issue for me! 😊

@PhillWyattProjects Жыл бұрын

Great video and tips!👍🏻 I bought a condenser dryer for all the washing and it's made a big difference through this winter. I set it to "cupboard dry". It condenses all the moisture into a container then I pour it down the sink. It also blows out warm air which helps to heat the house too. They are a bit power hungry but save so much hassle and I no longer air cloths at all so very convenient. Never had one before but now I couldn't be without one.

@PhillWyattProjects Жыл бұрын

@@garysmith5025 I never thought of that thanks that sounds like a good idea 👍🏻

@lmo3154 10 ай бұрын

when it is no longer viable look at a heat pump all the same advantages but a lot less power hungry

@iamrobfromcardiff5515 Жыл бұрын

Hi Keith - we have a late 1970s detached home, and was regularly getting 65-80% humidity. Done a number of same things as you, bathroom ceiling extractor made huge difference. The other things I’ve done which helped were:- - properly insulating the attic hatch inc. foil tape to create barrier. Helped reduce warm air from house condensing in attic - fixed a few cracks in mortar and external window sealant which I believe was causing some rain water to get in to bricks which was then creating more moisture and humidity internally… It’s now always in the 45-65% territory, usually around 55%, and I can’t remember last time it was above 70%

@iamrobfromcardiff5515 Жыл бұрын

Oh and also one of those small portable condensation vacuums are excellent to use semi-regularly especially if you have multiple showers a day in your household. They’re great to take a cup of water off the shower enclosure - even if you only do that once or twice a day after a shower. Me and my wife have two showers each per day, so even once makes a difference…

@psychotraveler4132 8 ай бұрын

Two comments. I live in southern Spain at 2000 feet and most houses have humidity and mould problems. We have found ventilation is key even when it is cold (and yes it does get cold 6-4 degrees c this week). Two tips use salt in a bowl at the bottom as of cupboards a cheap humidifier which can the be dried and reused. Also we found that if solid wardrobe doors were left closed it would result in wet clothes within about 3 days. Either keep a door open or replace them with louvered doors or curtains. We have now insulated our house and put in a powerful fan to circulate air so hopefully the problem will not reoccur. However this was extremely expensive.

@terry7893 Жыл бұрын

Great video. Anything you can do to NOT get dehumidifiers, is good. Dehumidifiers cost money to buy, money to run with electricity, they need to be cleaned, they need to be serviced, and they create noise when they run. So if you can stop humidity coming in from the first place, you're that much better off.

@aliathomas9079 7 ай бұрын

I live in a double wide mobile home half a mile from the beach. The mold cleaning routine has to be on point always here. The humidity is no joke! I clean constantly, have dehumidifiers in both bathrooms, the main living area and my bedroom. we have to empty the one in the main living area 3 to 4 times a day. I cleaned and painted my closets after finding mold growing on my suede and leather items. Painted it with a mold barrier and got rid of a ton of clothes and shoes for better air circulation. I am absolutely going to add the wholes along top and bottom on the interior of the house but worry that the external vents would just bring in moisture. Most days of the year you wake up and water is dripping off everything outside. I want to add vent fans in the bathrooms and want to add a solar paneled vent fan 8:30 under the rig for better airflow but my park won’t let me. I like the idea of of the attic air thingy and want to check into that but again the air around is pretty humid so whats a girl to do. Humidity, great for your skin, but hard on the hair do and your home! 🤷🏻‍♀️

@lindacgrace2973 Жыл бұрын

No experience in the UK, but I lived in Wisconsin on a lake, so similar cold, damp climate. I tucked moisture absorbers in all of the odd cupboard corners and closets. There are numerous brands of desiccant, but they are usually calcium chloride wrapped in a porous paper or fabric packet. Smaller sachets are only about a pound apiece and they las for months before needing to be changed out. It really helped with enclosed poorly ventilated spaces. Thanks for great content, Keith. Keep up the good work!

@RagnBoneBrown Жыл бұрын

Thank you, great information

@RossCanpolat 8 ай бұрын

I'm in a new build house. Designers installed an air circulation system called "air eco". Essential a big fan in the attic connected to a series of vents around the house and all exit out of a single pipe out the attic, like a bathroom extractor. The windows all have vents on them. The idea is the fan runs 24/7 and creates a sort of draft in the house pulling air from.the windows through the house and up into the air eco and out the attic. Some people in the estate complained about it making the house colder (marginally, I think it drops 1 or 2 degrees compared to being off). The people who turned off the system had mould growth within weeks. Similar to what's described in this video except my system extracts. It also helps to extract cooking smells and bathroom steam and smells very quickly.

@sallymay5272 Жыл бұрын

We live in a very similar house - 70s bungalow - which had all the same problems when we moved in. We had the cavity walls filled with insulation which helped but our old skool aluminium windows would still RUN with condensation in winter. Like you, a PIV fixed that overnight. They’re magic. We also knocked out all the built in cupboards that stank of mould no matter how much we cleaned them. Humidity still stubbornly sits in the 60-70% region like you. Bungalows just aren’t designed for good air circulation I feel. Still a great improvement and no further mould and mildew problems.

@Acheiropoietos 9 ай бұрын

PIV really helps. Doesn’t solve everything, but for this occasional asthmatic, the air quality is so much better all year round. 👍

@MikeStillUK 10 ай бұрын

Great video thanks Keith. We just moved into a new build property and humidity inside has been as low as 60% on a dry cold day and as high as 80% on wetter days. It depends on what the humidity outside is doing. We have had mould in several rooms on skirting boards and in kitchen cupboards. Not sure if this is a temporary issue due to the house being new, or whether this is what we can expect for years to come. Really helpful video.

@rizzidepizzi Жыл бұрын

We have a 1935 detached home (2 story) and when we moved in, had similar problems, especially on the cold side of the house. Also the house is double bricked and with stucco on the outside, so the walls can't breathe. It is only 20cm's detached, so one wall is impossible to reach from the outside. Since then, we installed double glazing everywhere, which reduces condensation enormously, every room now has one window with a ventilation grill. In our bedroom, the window is always open and we have a similar closet on the cold side. I've put a moisture meter in the closet and over the course of a year the humidity in the closet dropped from 75-80% to 55-60%. I'm about to install a mechanical ventilation system with a moisture meter, wich automatically turns on when RH rises above 60%. Also, as the heating in the bedroom is never on, we decided to heat the room for one hour a day with open closet doors and that also helps a lot. I have experience with this type of mechanical ventilation in our last house, which was build in a dyke, so the basement, which housed our kitchen and bathroom was very humid. the ventilation system reduced that dramatically. Ventilation is key though. You mentioned a dehumidifier, I have one on the attic, waiting to be used in my workshop.. I totally forgot about it! (insert facepalm meme). I'l get this up and running again.. Thanks for the vid!

@trumpwon2240 Жыл бұрын

Try hanging a pillow case half full of calcium chloride above a 5gal bucket. This will pull the moisture out of the air and drip into the bucket. This will make an impactful difference. Your local local Farm Store likely carries calcium chloride in bulk

@mikepope577 Жыл бұрын

Great advice. I've done most of these things in my victorian terrace with good results but not the PIV yet. I too use a dehumidifier to dry clothes together with a heated drying rack. One thing I highly recommend is a window vac which I use in the bathroom (I also don't have a window in mine.) Half a minute round the tiles and mirror and the room is dry. I used to think they were a gimmick but they're we'll worth it.

@paulwilson1555 9 ай бұрын

Piv are well worth it, and surprisingly good value and can be fitted in half a day at most, by any decent handy man.

@Kegels_gti_16V 3 ай бұрын

We have started out with a bathroom ventilator,, since 2 years we have a vent-axia multihome. I can tell there is no more mold in the bedroom, since it is ventilating 24/7.. I also checked humidity for 7years. It is a a lot better now.. people really need to ventilate there houses, it is inportend!

@natalievarney9102 Жыл бұрын

Omg your channel is amazing im sooo glad i came across it!! This is exactly what i needed to learn!! You explain it sooo clearly :D Im a female with very minimal knowledge on all of this and have just had to deal with a load of mould - so this wonderful! Thank you :) Already ordered those sensors!! I'll let you know what I find :)

@Jane74100 9 ай бұрын

THANKS SO MUCH FOR THIS VIDEO! Lots of mold in our house. Constant wiping of the windows, walls, etc. AND - yep, it is a 1 & 1/2 story bungalow built in the 50's!

@Extragonk Жыл бұрын

In our mixed bag of a house we ran an experiment through autumn into winter, whereby we used 2-3 heavy duty dehumidifiers to cover the high rooms, using HomeAssistant and the tado trvs to track the progress. The dehumidifiers worked up to a point, but when winter really landed they could not keep up as the temps in the house tanked. We played around with the heating cycles and eventually the only real game changer was setting the heating on a process similar to a heat pump schedule, with a lowish temp, but all the time and a setback overnight, this really standardised the whole house and dropped the humidity down into the 40-50 range in all rooms. With this in mind we're exploring air to air heating for next winter.

@michpaulatto Жыл бұрын

This seems interesting. Can you explain how the heat pump cycle works? Some details on your schedule would be helpful. Thanks

@Extragonk Жыл бұрын

@@michpaulatto by heat pump schedule, it is continually on for the day set to 19 degrees and night to 16.

@leecromer3289 9 ай бұрын

Isn’t that expensive though?

@Extragonk 9 ай бұрын

as someone guessed in a later comment, the schedules were 2 blocks, a 7am-midnight and midnight - 7am, the might block was setback to 16 and the day was set to 19., all rooms were set to the same, and in our house all room doors are always open, so the hot rooms helped the colder rooms to equalise.

@Extragonk 9 ай бұрын

it didnt seem that much more expensive, but the main difference was really in the house stopped having big swings in temperature, so was generally more comfortable, if i remember it was about 10% more.@@leecromer3289

@louisejones5396 Жыл бұрын

In rainy Manchester in a 1910s terrace. I only bought the humidity sensors a couple of months ago so no summer readings but I’m getting 40%-65% depending on the weather and indoor laundry drying. No extractors but always have the windows on the open security latch (vent) for at least an hour a day and the whole time in the room the laundry is drying. My bedroom is the worst, which I could tell from the mould when I moved in. I lined the back of my fitted wardrobe carcasses (built from watching your channel) with cork, which might be helping or it might just be the ventilation. I had a new damp proof course fitted downstairs and that’s where I get the lowest readings.

@johnomahoney565 Жыл бұрын

Didn’t know you could fit anew DPC, how does that work?

@louisejones5396 Жыл бұрын

@@johnomahoney565 It involved removing the plaster inside to windows sill height, drilling through the outside and inside brickwork and injecting it before a plastic mesh and the dot and dab. I didn’t do the work myself because it was a big job, took two specialists a week.

@johnomahoney565 Жыл бұрын

@@louisejones5396 Thanks for your reply. Good to know.)

@ezee3615 8 ай бұрын

This is very helpful. I have moved US to Greece and I am fed up with the humidity in our home. We have refinished walls, insulated the house, and we are still fining mould in cabinets and under beds, and on bathroom ceiling! Thank you for your recommendations! I’m glad to know I’m not the only one dealing with this!!

@Patmac74 9 ай бұрын

Almost every issue you have encountered i am going through with a renovation on my mother's 60s bungalow. I just bought some of those humidity meters and a damp meter after watching this 😂

@6ddevil Жыл бұрын

Just fitted a Piv in our very damp no cavity house, it’s been fantastic, the next cold very morning windows were 90% clearer and the bathroom is much quicker to dry out, the humidity is down to about 60%, apart from the cool air on landing it’s fantastic.

@jenniferdoyle3969 10 ай бұрын

Did you notice an attic smell coming from the piv unit? I have mine a week now and the loft smell is still quite strong.

@6ddevil 10 ай бұрын

@@jenniferdoyle3969 Hi, Yes we do get a woody smell especially on warmer days when the Piv is set to speed up…not tried it yet but I did wonder about an air freshener up in the loft near the intake, just an idea.

@jenniferdoyle3969 10 ай бұрын

@@6ddevil Yes, I heard that a piv unit company advised on using an air freshener up in the attic to combat the smell. I will have to try that next if things don't improve. ...The smell I'm getting is that typical loft insulation smell which is really awful. It hits you when you open the front door coming home. I just hope it improves over time. ...Really disappointed with it. Thank you for replying anyway.

@6ddevil 10 ай бұрын

@@jenniferdoyle3969 No problem, always a few negatives unfortunately, hopefully your damp problem is better, our house is so much better, but we have had to decorate some rooms as its so much drier the paint in some rooms has crazed. 😂😂

@MrSmith_ Жыл бұрын

I painted the exterior wall of my bungalow using a product called stormdry, it allows brick to breathe whilst giving the brick waterproof properties. It was a shot in the dark, but I'm glad I went with it. On top of that, internally I mixed thermal insulation powder into the paint and gave the walls a couple of coats which has really helped. I rarely see humidity over 60% whereas before it would reach levels as high as 80%. There is one caveat the to paint and that is the finished surface is textured, almost like a really fine grit sandpaper. But nevertheless, a small price to pay for a better quality of life.

@Treborse6 Жыл бұрын

Are you a rep 😂

@MrSmith_ Жыл бұрын

@@Treborse6 Nah, just someone that's used the stuff and reporting my findings. Some people may find it useful to know how others got on with it. I can genuinely say after the winter we've had, not a single bit of condensation on the walls which I would say is mission accomplished.

@matthewboyle9630 Ай бұрын

Great video and helpful information in the comments section Thank you to everyone

@krisbriggs7558 Жыл бұрын

When we had new windows fitted in our house we notice that we was getting damp patches on our stairs (I had already ripped the carpet up) and that was due to build up of moisture in the air as the new windows didn’t allow good ventilation, had a PIV unit fitted and help massively, also helps with the kid’s asthma as they are breathing in damp air 👌🏼👍🏼

@garstangterrier501 Жыл бұрын

I will buy some humidity sensors and confirm my house results. Sub 60% in UK without loads of dehumidifiers sounds unrealistic. We bought our second new build a few years ago. Most noticeable difference from the first new build - No bathroom vents, no window vents but it does have a positive air input from an envirovent in the attic at the top of the stairs. We dry clothes in a spare room and occasionally open windows. No dehumidifiers. So far no problems with mould growth. I think the envirovent does such a good job at pushing moist and stale air out. We have considered adding bathroom extractors like yours and vent them through the gable walls via the attic.

@lindawylie8275 Жыл бұрын

I have a 1932 bungalow built with solid walls and it can be a nightmare. I definitely need to invest in a piv unit. One thing I did was to stop using wallpaper as that held any moisture so leading to black mould. If you are fitting an extractor cooker hood, it's worth working out the cubic size of your kitchen so you get one powerful enough. Worth the investment

@lindawylie8275 Жыл бұрын

And thank you for the very useful information

@MrEogin21 Жыл бұрын

We have experienced everything you mention here (bungalow also) and would agree that ventilation and dehumidifier are the answer. 30% humidity is not achievable in uk as we're a small island but under 60% and nearer 50% perfectly doable with the aforementioned dehumidifier.

@Gojirosan Жыл бұрын

A video addressing the bane of my existence! Cheers K, some great advice. Love to the mogs!

@RagnBoneBrown Жыл бұрын

Glad it was helpful!

@duncanreed2391 Жыл бұрын

1901 double skin brick detached house. Humidity 40-60% usually. High power extraction and open windows in showers rooms, and 2 powerful dehumidifiers (one on each floor) running most of the time they generally pull about 20litres of water a day between them in the winter.

@lordtj63 Жыл бұрын

Wowww loved this informative video. We have lived in this barn conversion since 2001.. and in the dining room the outside/inside walls are black.. they wont come clean.. so we are going to have the quarry stone rendered over like the living room side and are going to have the plaster hacked off and redone... we have dehumidifiers also, one upstairs the other downstairs.. its surprising how much water they manage to draw in. I have never seen those PIV units, Im wondering if one of those would be worth investing in here... I noticed we also have black mold coming back again in the corner ceiling area of the kitchen, and black mold forming in the porch too... over the years our vent bricks have been painted over by previous owners, so will have to look at getting those replaced. The walls here are so incredibly thick being an animal/hay barn, and barns weren't meant to be lived in, let alone 21st-century living.. Im so thankful to you for making these videos, Im going to watch this a few more times and start writing down "must haves" lol. Also those little humidity gauges/sensors are something Im going to invest in also. Thank you, thank you, thank you! Blessings to you from Cornwall 🙂

@bosse641 Жыл бұрын

Wood stoves makes for dry air. I would would want to have that in my home if I lived in a cooler/colder climate. I think that would would help a lot with mould.

@RhinoMetalworkz Жыл бұрын

done everything identical piv unit was best thing ever seeing similar numbers since as well

@dper1112 Жыл бұрын

I live in a 2F apartment that gets direct sun year-round. Humidity is only a problem for me during the rainy season, when it could get up to 80% or more. If it stays in the 80%+ range for long, I use the "dry" setting on my mini split to bring it down some. In the other three seasons, the humidity is rarely high enough to be a concern. I dry my laundry indoors with no issue. I keep a low-speed vent fan running 24H. It pulls fresh air from an input vent on one side of the apartment all the way through the place and out the bathroom ceiling. In this climate zone, the realtors have told me that ground floor apartments can have serious humidity issues, at least if they don't have windows that get much direct sunlight, which is common in the city where neighboring buildings are close by. But if you're 2F or higher, you're probably going to solve any occasional concerns by firing up the mini split.

@wrzlygummidge Жыл бұрын

Great vid Keith, as always, and Yep, Yep, Yep - I also bought a detached bungalow and it took me a while to realise then figure out. I also had a "back of the wardrobe" moment, so now keep all furniture 20mm away from walls, especially the north-facing walls, which is where most of my problems arose. I manage to keep the humidity just below 60 in the Nov-March period by moving the dehumidifier around as needed. Otherwise ventilation seems to be the key aspect. Am sure you've seen it, but Charlie DIYte has a great vid on lifestyle habits, which together with all the measures you covered, make it possible to get to grips with humidity - the bane of British winter weather! atb

@leeedwards3783 8 ай бұрын

Great video. I own 2 1930's bungalows which have the same issues. Ventilation is key as you point out. These properties used to have big open chimneys which eventually get bricked up so no ventilation. Air bricks are great. Will look into the positive fan. Thanks so much

@soundslight7754 13 күн бұрын

Dehumidifiers aren't expensive to run and improve quality of life so much. They save more their running cost as house feels so much warmer when drier. You can consider a heat pump dehumidifier. Some models send you a text when done. They cost maybe £50-100 more than a regular tumble dryer and take up similar space. Cost much less to run but may take longer to dry your clothes

@essentialhandyman Жыл бұрын

Wow, where to start? As a building surveyor specialising in dampness, mould and condensation, with thousands of damp surveys behind me, I keep saying I'm going to do some videos on damoness, mould and condensation and how to control it. But as it's damp season at the moment, I'm literally flat out surveying and writing reports. Keep an eye on my channel and I'll hopefully get around to it in the next month. That should give you some more advice and further advice on how to get your bungalow down to under 60%.

@lincolndickerson1293 Жыл бұрын

Thanks for all the great information. I didn’t realize how inexpensive the sensor are. I ordered a twelve pack to place around the house simply to see where any temperature and humidity problems might be. Humidity is opposite where I live, high in the summer, low in the winter.

@richardschofield2201 6 ай бұрын

Im in a 1950's ex council house. Red brick with cavity. We keep windows closed, do t have an extractor in the bathroom or kitchen and humidity tends to hover from 55% to 60% and no damp issues. I think we get away with it is because it has an effective damp later two bricks up and we have an open fire with all internal doors always open so its always drawing some air through. So it can feel a bit draughty, but its dry.

@emusaurus 9 ай бұрын

My house is in a humid forest area. The ground outside is higher than the house, so humidity never falls below 65% usually about 75%. So imma be digging out my house over the Christmas holidays. Summer in Aus, so great time to do it.

@SeanBZA Жыл бұрын

Just remember those cheap sensors are generallt uncalibrated, relying on batch calibration to get a reading accurate within 2 counts per unit, but the overall accuracy is plus or minus 5 % either side, though the temperature side is generally, due to the sensors being made in bulk and trimmed during manufacture, within 1C of the actual temperature. Getting lower humidity you probably want to first get a countercurrent heat exchanger, and use that on the bathroom vent, so that some of the heat in the hot humid air is used on the way out to heat the incoming air, which will also leave it less humid. Same for kitchen, where the exhaust will do the same for the replacement air, both lowering the amount of heat needed to heat the interior, and reducing humidity as well.

@stephengreenhalgh7147 4 ай бұрын

We live in a semi on a hillside, the front is underground and damp is seeping in, I have a dehumidity machine on 24/7, unless like yesterday, we have a dry day when I’m home. Then I run an extractor from the underground front window, (which we had installed) and open a window or two at the other side of the house to get a throughput of dryer air through, which also give the dehumidifier a rest! We still experience high humidity levels though, so I’m toying with digging in drainage so the house basement isn’t the low spot. SRG

@SweetAndSavouryRecipes7861 10 ай бұрын

😮i have exactly the same problem, i live in a bungalow, this video helps so much. Thank you! much appreciated. 🙏

@loose_tooth 5 ай бұрын

Awesome video. I am in a 1950's semi detached house 3 bedroom (well, 2.5 bedroom)... and it is mental upstairs for humidity and mould! We can reduce the humidity down from the high 80's to the high 50's if we run a 12L Meaco dehumidifier all the time. The second that we turn off that dehumidifier it starts to climb back up again (using a sensorpush hygrometer to log the data - will be switching to inkbird ones as I cannot afford multiple sensorpush) and within an hour or so it goes from 60-ish to mid 70's plus. Never heard of a PIV system, but I am really looking to that now as something that could help. Many thanks.

@BBirke1337 4 ай бұрын

Problem are half-renovations, with insulating, airtight windows, but no wall insulation. Then there are high humidity levels an cold walls, where humidity easily comes close to 100%, causing damp and mould. Best is to insulate the walls and roof/upper ceiling. I wold not create openings for uncontrolled airflow from outside, which cause major additional heat loss. Automatic ventilation with heat exchange is best, but expensive.

@DebsHill1 Жыл бұрын

i live in a single level hime built in 1950’s and we have had similar issues. humidity in Auckland is an issue all year round. we are slowly renovating, but so far we have changed the extractor in the kitchen, installed a HRV system similar to yours in the attic. we are planning to paint with mould resistant paint, and are installing a heat pump dryer soon as the existing dryer adds to the woes.

@tommcclintock5019 Жыл бұрын

I live in a pretty arid region so I usually end up having the opposite issue--too little humidity. Still, this was an interesting video and I appreciated the frequent cat scenes!

@normanbott Жыл бұрын

We've stopped using the tumble dryer and use a good de-humidifier with a simple but large clothes dryer. It's cheaper since we're all electric Economy 7. We've got monitors too and are managing to keep around 60 percent RH max. We open the windows on the vent latch regularly, and I installed the same bathroom extractor as yours.. It works well and replaced the really cheap ones installed before. Lovely tortie cat, like our Michi.

@fromthepalletshed Жыл бұрын

We are in a row of house and we have been fighting mould for years. Clothes go mouldy in cupboard, mould around windows and in some corners of the house which are attached to outside walls, we currently have 3 dehumidifier and when you turn them on they are around the 70ish mark but we manage to get them down to 30ish.(don’t know how accurate these these machine are) but they do pull a lot of water out. We also get condensation in our loft. Sometime it seems like we are fighting a loosing battle. Some great tips and defiantly some thinking points. Thank you for a great video 👍

@kanatsizkanatli 5 ай бұрын

Do you have cavity walls? What about a damp proof course? Are the external walls rendered and if so, does it cover the damp proof course? Do you have water build up external walls? Do you have guttering that is leaking or splashing onto your external walls? After checking these, check indoors to improve ventilation, having a better solution for drying your clothes, having a dehumidifier in problem areas. Considering installing an extraction fan if you can and maybe even reducing number of times you boil the kettle

@robjworkshop5692 Жыл бұрын

60% or 63% - difference is negligible I'd say. Anything British regs-oriented always errs on the side of caution. If there's no mould, air feels great, then all's good in my book. Did the same in our bathroom - had to go out thu' the roof with a Cyclone extractor fan as no space in the eaves - works a treat, almost like a Dyson!! Loving what you've done to the place, Keith, a lot of thought. work and effort (and £££!) gone in to the place. Great vid with Robin Clevett btw! Just watched one of his as I'm now tackling the doors and skirting in our cottage, and hitting the flat roof on the extension this summer!

@RagnBoneBrown Жыл бұрын

Thank you!

@2shadyladies Жыл бұрын

Thank for these tips. After watching I will purchase a positive air exchanger.

@Chris-rs4bh 10 ай бұрын

Great video im in a 1970s bungalow with about 70 - 80 percent humidity

@dennistaylor3009 9 ай бұрын

Get yourself a Meaco Arete one 12L dehumidifier we had the same problem, i got one from downstairs and was so impressed i bought another one from upstairs problem all gone i would highly recommend this unit.

@bobgriffin316 9 ай бұрын

I had problems with mould in a flat for about 15 years. I started by doulble glazing the windows. This helped a bit but certainly did not fix the problem. The solution that worked for me better than anything else was to insulate all the outside walls. I had to insulate every wall. It was difficult to insulate a wall in the bedroom in a narrow room where I could not afford to lose space and a radiator was in the way. I had old thick Victorian plaster. I found a plasterboard that had 17 mm of polystyrene insulation and and 9 mm of plasterboard stuck together. When I had it put on with a skim coat of plaster it was the same thickness as the old 32 mm Victorian plaster that was taken off. Where I had space I insuled the walls with 50 mm thick solid insulation board with 50 mm battens on the wall and with plasterbord over it. I even insulaed under the timber floor (100 mm solid insulation board held up with chicken wire. Note: do not put fibreglass here because if you have spills on the floor it could get mouldy under the floor - the solid insulation will dry off) (and insulated the central heating pipework and cold water pipes at the same time) but this was not necessary. The insulation made the walls warmer and I never had a problem with mould again. I did also put an extractor over the cooker. I could not vent the steam to the outside but it still helps because it keeps the moisture in the extractor rather that on the walls. I did have ventillation holes in the wall but it did not work until I insulated all the walls. I left the bedroom wall to last. Mould was on the bedroom wall until I did this wall. I worked at the walls bit by bit until the problem got fixed. I was learning as I was getting the work done. I had to insulate every single wall to completely get rid of the problem. Of course the side effect of all this work is that the flat is warmer and a lot cheaper to heat. It was well worth doing. It did not cost a fortune. The flat now has an EPC (Energy Performance Certificate in the UK) of C which is good for and old flat. Best wishes.

@pbarnfield Жыл бұрын

Our 1990's semi detached is around 60% at the moment with internal temps of 18-20c. Also had humidity issues this winter like many. Installed lap vents in roof linings (loft got condensation during the chilling mid-Dec), new humidistat bathroom extractors and also got the sensors everywhere. Worst room is my girls room, two of them in there, hairdryers daily etc. Placed some big dehumidifier pots in the room and a month later they're full - seem to be doing the job as RH is 65% in that room compared to 80% it was before. No recurring mould on their window and the internals of the external wall are in better shape. Next investment will be a PIV system I think, seem to get good reviews overall. Oh and trickle vents installed into our fairly new uPVC windows - why they're not standard anymore I don't know!! Also got a wardrobe issue which is built in to room as standard - external wall mould. Put a wardrobe hanging dehumidifier pouch to see how that goes too. Great video Keith for those who need the advice.

@SCMaffs1985 Жыл бұрын

We have a range between 17% and 77%, currently 57%. We live in a 1980’s detached house with a PIV fitted on the landing ceiling. The one thing to consider is you issues with the roof will have dumped a load of moisture into the house.

@christopherbailey582 Жыл бұрын

We live in a 1930s 3 bed terrace, average about 45 - 60% humidity in winter. Don't use central heating much but do have a wood stove which helps a lot. Front of the house still has old knacked upvc double glazed windows and the back is mostly new.

@DarvePagie Жыл бұрын

Given you have a bungalow an MVHR I would have thought would be an easy retrofit and you gain the benefit of recovering heat from the air been extracted out of the building, we have installed a Brookvent 1.3 digital+ that also has a summer bypass feature to help cool the building

@tonybevan1742 7 ай бұрын

We have the same problem, we moved into our bungalow in August last year, then in November the black walls started, the rain batters the wall where the damp is, was have bought a dehumidifier and I am about to fit trickle vents to see what that does. We have also naught the most recommended wall sealer to paint the walls with when they warm up and dry out. Thanks for your Facebook help.