How Gas Cylinders Are Made? (Mega Factories Video)

Рет қаралды 542,055

3 жыл бұрын

If you are wondering how gas or propane cylinders are made, the ones we use in our kitchen or at work place you have come to the right video to learn exactly the same. In this video we go step by step in the process of how gas cylinders are manufactured and the different steps involved.
A gas cylinder is a pressure vessel for storage and containment of gases at above atmospheric pressure. High-pressure gas cylinders are also called bottles. Inside the cylinder the stored contents may be in a state of compressed gas, vapor over liquid, supercritical fluid, or dissolved in a substrate material, depending on the physical characteristics of the contents. A typical gas cylinder design is elongated, standing upright on a flattened bottom end, with the valve and fitting at the top for connecting to the receiving apparatus.The whole manufacturing process consists of the following steps:
1. Blanking & Body Forming
2. Valve Guard Ring & Foot Ring Production
3. Valve Neck (Valve Boss or Neck Ring) Production
4. Welding, Heat Treatment and Hydrostatic Testing
5. Surface Coating
6. Finishing Line with Pneumatic Testing
7. Valve Production
LPG Cylinder Production is composed of several sheet metal forming, surface treatment and testing processes. The process starts with blanking, deep drawing and piercing, trimming and joggling. Next are the welding operations for valve boss, valve guard ring, foot ring and the two halves. The finished cylinder is then heat treated, tested, shot blasted, painted and then the valve is attached and final tested.
Video Credits: www.repkon.com.tr
This video is part of our ‘How Everyday Things are Made’ series. To watch other video of the series click on this link: kzfaq.info/sun/PLmHzFWJOOSAoI1i6R-YMCdVIDmMDjBV40
Join 'Engineering World' like many others to get access to very special perks:
kzfaq.info/love/h2wZoBynUkHmTX2GOwAKKgjoin
Also, kindly consider subscribing to our channel if you liked the video: geni.us/SubscribeChannel
Watch some of our other interesting manufacturing videos:
How Plywood Is Made In Factories?
kzfaq.info/get/bejne/ab2YbLGK28y3pJ8.html
How LUXURY Rolls-Royce Cars Are Made ?
kzfaq.info/get/bejne/eLymobarstetY4E.html
How Jigsaw Puzzles Are Made?
kzfaq.info/get/bejne/pN-ceM-kp5-xm3k.html

Пікірлер: 117

@peterhope7564 2 жыл бұрын

The welding part looks very interesting. Always liked metal work although I became an electrician

@mdagainbabu-pe2yx Жыл бұрын

I am job

@naeempatel8466 Жыл бұрын

@@mdagainbabu-pe2yx😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

@engineeringworld. 3 жыл бұрын

The jigsaw puzzles which we all solved right from our childhood days are manufactured with some great engineering behind them. Watch this exciting and informative video to learn more! Watch here: kzfaq.info/get/bejne/pN-ceM-kp5-xm3k.html

@MultiArrie 2 жыл бұрын

We in the Netherlands still useing propane and butane cilinders produced in the 1950's these are just made as well. Verry nice modern factory.

@jeanettewest 2 жыл бұрын

This factory looks absolutely brand new, and the "workers" are moving rather stiffly. It seriously looks like a bunch of engineers are perfecting the processes and settings prior to handing it over to the owner and workers.

@themachinist6578 2 жыл бұрын

That is because Repkon does not make cylinders. They build plants that make cylinders.

@sudhirtirkey3234 6 ай бұрын

My God! What an observation?

@blackbear92201 2 жыл бұрын

Very interesting video. I liked all the steps, but the furnace to release welding stresses was an interesting surprise. thanks for posting! :D

@alexnelson7258 2 жыл бұрын

Couldn't agree more!

@johnuhr-henry9508 2 жыл бұрын

I liked the Submerged Arc welding processes.Its been brilliant for 70 yrs. now.Remember it was in vogue wnen i served my Engineering Apprenticeship in the 1950`s/ 60`s when we made very big pipes and pressure vessels too.

@thelmasmith2866 2 ай бұрын

It was interesting to watch how they melted, and welded the calinger back together.

@donalfinn4205 2 жыл бұрын

Liked the welding!👍☘️

@tyronnehartnett221 2 жыл бұрын

Blanking at the beginning is really deep drawing of a deep drawing grade of metal.

@marcelomarquez2089 2 жыл бұрын

This is what I was looking for! Thanks.

@RichieCat4223 2 жыл бұрын

No ear protection for workers. Factory looks top notch.

@Textra62 3 жыл бұрын

I liked the welding process in the assembly, this industrie is very very safe.

@christianishimwe9736 2 жыл бұрын

Hey all of those welding processes are really amaizing

@chukwugozievictor9154 Жыл бұрын

Very very

@shafiekj1168 2 жыл бұрын

I have not wondered how cylinders are made until now. 😂

@jackcollier929 2 жыл бұрын

Liked it all!

@joejoejoejoejoejoe4391 2 жыл бұрын

4.42 wouldn't it be an idea to only have the welding start after the door is shut ? All you need is a switch on the door, like a chuck guard on a lathe. Interesting vid all the same, no swarf or fillings were made throughout the whole process

@The_DuMont_Network Жыл бұрын

There's no filling until the cylinder is finished and tested. There are, however, filings when metal is drilled or machined.

@Alex-xh9kv Жыл бұрын

I thought the same thing, a simple switch on the door jamb would do. An audio or visual indicator, both would be ideal, can alert the worker that the welding is done.

@akkammapanicker56 Жыл бұрын

All processes was good

@maroof101mb 3 жыл бұрын

Wow now I know!

@michaelt.m.n6689 2 жыл бұрын

لك هذا غاز العراق عاش العراق 🇮🇶 THIS IS IRAQI FACTORY PEACE ✌ IRAQ

@WildMidE 2 жыл бұрын

هههههه يمعود القناني مكتوب عليها غاز العراق لانها تتصدر للعراق بس المصنع مو بالعراق

@fatihyldrm2549 2 жыл бұрын

No people talk Turkish language

@RR3-buoy Жыл бұрын

I love welding process

@velaphitshabalala2912 2 жыл бұрын

More than anything I'm happy to see so many people employed instead of machines. Most of these processes can easily be done by robots. Big up to the company.

@sayampatwa4895 2 жыл бұрын

Amazing

@sudhirtirkey3234 6 ай бұрын

Semi automatic plant. Why extra 2 people to lift and place stampings for arc welding, manually, after trimming? Submerged Arc Welding of the neck was very good.

@chukwugozievictor9154 Жыл бұрын

Everything about the processes is highly interesting, oyibo una too much

@michaelrief4424 3 жыл бұрын

I’m watching your videos and I like them but I would also like to know where the factory was located.

@ivry4846 3 жыл бұрын

Balibey, Fabrika Sk. No:1, 34980 Şile/İstanbul, Turkey

@MrJitendra007 2 жыл бұрын

That's not a Blanking its called Deep drawing....

@davidh.andreotta94 3 жыл бұрын

Very few are wearing safety glasses.

@padiyar 3 жыл бұрын

This should be in plant in lran or gulf ?

@astrixistheman 3 жыл бұрын

No hearing protection or safety glasses in sight...

@engineeringworld. 3 жыл бұрын

Good observation. According to you what all necessary PPE should be used for working in such an environment?

@astrixistheman 3 жыл бұрын

@@engineeringworld. Not sure quite what you mean lol, but some hearing protection would be good for them, unless the mic makes it louder. Some probly could use saftey glasses some places. Here in AUS my work place gives out free gloves, muffs, eyeglasses and stuff. I did also see some workers using some rags to pick the hot bottels up, witch call me over portective but heat gloves might be better because a rag could get snaged in moving equipment.

@singinghobbit1219 3 жыл бұрын

@@engineeringworld. Seconding what NASA the Potato said. My former workplace (in the US) had really similar machines for metal fab that involved cutting, forming/rolling, arc welding, blasting & painting. Basically all what's in the video. Anyone cutting, shaping, or welding needed full-body protection like coveralls (saw guys in the video just wearing short-sleeve T-shirts). Plus gloves, foam-lined safety glasses, hard hat, saftey boots, and earmuffs/earplugs. There was some welding by hand and that required the full face shield too. Even just for engineers/managers/visitors to walk through, everything but the coveralls and gloves were required for them too. Anyone in blasting and painting shops wore the white flame retardant coveralls (look a bit like hazmat suits) and respirator/dust mask with R95 filter. Off-limits to anyone without the equipment while work was in progress.

@singinghobbit1219 3 жыл бұрын

Honestly my biggest concern is the hearing protection. Even if the camera mic is making it seem louder in there, prolonged noise even at lower levels will definitely cause hearing damage. Even just having a desk next to a busy office printer for a year can permanently damage your hearing (seriously). Second concern is the painter without a fully sealed face mask & respirator. The paint particles and fumes are very bad for the eyes and lungs. The environment in this video is much more automated and machine-controlled than the one I worked in, and the finished products are a lot smaller. So their needs are going to be different and not everything I listed is necessary.

@tonywright8294 2 жыл бұрын

Have you ever been in a factory ? This is paradise compared to other factory’s so quiet and clean .

@Amir-ob2ft Жыл бұрын

Stress Releveing was best

@bismillahbismillah9209 3 жыл бұрын

Thanx for making this video.

@TheDustysix 5 ай бұрын

What is the dry inerting powder?

@tabishislam6602 2 ай бұрын

Making of brass valve

@petrvaclavek3605 3 жыл бұрын

1200 °C for brass forging??? that would be liquid

@alainmare8081 2 жыл бұрын

Fusion point of brass is 932 * C. So stamping process should be around 650* C to 700* C. Probably mistake between Fahrenheit and Celsius, 1200 F = 634* C.Repkon is a Turkish company selling turkey projects to different industries sectors.

@fakhrulhasan4789 3 жыл бұрын

👍

@HaHa-tb8bz Жыл бұрын

Wow 🤯 baby kingDom 😍 love 😍

@MrLESRAJ 2 жыл бұрын

Why not painted the inside of the cylinder, thanks.

@johnqueen2754 2 жыл бұрын

I bet the people at the gas tank place are always under a lot of pressure to get there job done right!!!

@tonywright8294 2 жыл бұрын

Ha ha 😂

@daveytn 2 жыл бұрын

What's the black powder for welding?!

@tomhoitink1808 2 жыл бұрын

The black powder is like the flux coating on stick welding rods. it protects the puddle and leaves slag like with stick welding. its called submerged arc welding SMAW ( in Dutch: Onder poederdek lassen (OP))

@petermcgreevy6386 Жыл бұрын

the noise there was pretty high and no workers were wearing Hearing protection as far a s I could see, later in life the hearing loss is more evident.

@pierrejacquelinet3399 2 жыл бұрын

En 1975, j'ai été invité par VALLOUREC dans le nord de la France pour visiter une de leurs usines, et peut-être racheter une de leurs machines à transfert qui fabriquait des bouteilles de GPL 13 kg sans autre intervention humaine que son approvisionnement en tôle d'acier et bossages de robinets. Qu'est devenue cette machine? Car à l'époque, nous ne l'avons pas achetée...

@deannaspencer8988 Жыл бұрын

All Stores Please Lower the cost of all Military and Local for all Brands of Gas Cylinder Products and Accessories and Production Cost Now That's too much $$ The Whole World Now 🙏🙏🙏

@pratapgupta6650 2 жыл бұрын

Depends upon the life of a tower. I wonder the last fo 50 to 100 years?

@darkspace3316 3 жыл бұрын

Great video! I am Sixth!

@oz93666 2 жыл бұрын

my training in metallurgy tells me they don't need putting in a furnace 6:21 to "relieve stresses from welding" ..overkill and a huge waste of energy .. these are very low pressure cylinders.

@nikokapanen82 2 жыл бұрын

What metal is that? Steel or aluminium?

@wades623 2 жыл бұрын

Steel

@ydufuydycufu2643 Жыл бұрын

المعمل ينتج قناني غاز للعراق في حين كان العراق أولى به ان يستورد المعمل بكامل معداته ليعمل في العراق

@danfrednz 3 жыл бұрын

watch till the end... i dont think so mate.

@jmservice3989 2 жыл бұрын

Where are all the safety glasses?

@geminiprod.0 Жыл бұрын

What would we do without machines

@Alex-xh9kv Жыл бұрын

Get less done, with less safety, quality, & more costly. In short, life would be much harder.

@oo0Spyder0oo 2 жыл бұрын

Be grateful if you aren’t a robot like these people, some jobs need to be fully automated and remove the drudgery of repetition these guys go through. That’s got to get boring real quick.

@heybudi 3 жыл бұрын

I'm the last one 😂

@mahendlodho8848 Жыл бұрын

Kya job mil Sakti hai

@joemizer 2 жыл бұрын

No safety glasses or hearing protection. Hmm

@SalimSalim-zz4kk 3 жыл бұрын

غاز العراق

@user-jf1kk3kw8c Жыл бұрын

صادق محمد صادق محمد

@ktanprajapati5216 2 жыл бұрын

Pneumatic test

@geofham8332 2 жыл бұрын

Not a machine guard in site, what an employer??

@svaytep1272 2 жыл бұрын

suostei tae anak so k sabbay

@truthcantbehide Жыл бұрын

In arabic .. they wrote on cylinder.. iraq gas ... غاز العراق

@Jfjs58-g 2 жыл бұрын

CelSius*

@2k7u 3 жыл бұрын

Haha I am first!

@wernhervonbraun4222 3 жыл бұрын

Third

@zozococototo 2 жыл бұрын

It is Written on the head of the cylinders ( GAS OF IRAQ ) in Arabic !!

@ibrahimbarrie736 2 жыл бұрын

Hi I am a gas seller how much

@636rahul 3 жыл бұрын

Second ! xD

@GoldwingNorway 2 жыл бұрын

Nope, never wonder how they are made.

@mdagainbabu-pe2yx Жыл бұрын

I am successful operator I am Bangladesh worker I am Bangladesh go to home company

@kakashihatake5625 10 ай бұрын

Colouring

@engineeringworld. 10 ай бұрын

Thank you for your feedback!

@jonyemm 2 жыл бұрын

"Hydraulic machine". Im leaving.

@ikvangalen6101 2 жыл бұрын

Nice! No headwear, ear and eye protection! Workers are being cornered with “ safety” rules, up to a sickening level! I’ve worked in places where you’d get sent away for good if you would come down a flight of stairs and not holding the rail with both hands! Rediculous!

@Jonas_Aa 2 жыл бұрын

Yeah, It's like you can not have a hand saw at work since you could possibly swallow it.

@amerjamel2117 Жыл бұрын

There is a copy of this factory in Iraq for the same company - a very failed factory and the amount of scrap is much more than the amount of good production