Rails installation for IKEA PAX sliding doors \ Part:4

Рет қаралды 377,495

4 жыл бұрын

Part :4 of ikea pax wardrobe assembly where I will explain
Ikea sliding doors rails installation will take you from a-z installing bottom rails and top rails for Ikea pax sliding doors explaining Ikea sliding door rail kit including ending panels. Ikea sliding door track on the bottom is easier to install than the top one sliding door rail at the top is a bit more challenging but is important to get this Ikea sliding wardrobe door track assembled right as it sits on Ikea pax wardrobe frame and holding all weight of pax sliding doors.
Ikea pax wardrobe assembly instructions you can get 2 different assemblies of the frames in PART 1 and PART 2 than joining two frames in part:3 and part 4 installing w rail for Ikea pax. It is important to do this part right so you don't have later in assembly problem with Ikea pax sliding doors.
PART 1:
• IKEA PAX WARDROBE / 3...
PART:2
• IKEA PAX WARDROBE asse...
PART 3:
• How to join Ikea Pax w...
PART 4:
• Rails installation for...
PART 5:
• IKEA Pax sliding doors...
PART 6
• IKEA Pax sliding doors...
If you like to support my channel:
Viewers can purchase a Super Thanks on a video to show their appreciation, and then post a colorful comment. Thank you ;)
/ ppflatpack
Thank you for your support.
**Tools I'm using **
Small electric screwdriver
amzn.to/2AYddCK
Bigger drill and screwdriver all in one
amzn.to/2RJMJiP
For more tools for furniture assembly or general DIY adventures.
www.amazon.co.uk/shop/ppflatpack
Music:
Epidemic Sound
www.epidemicsound.com/referra...
Some of the links above are affiliate links, where I receive a small commission if you click on the link and purchase an item. There is no extra cost to you but it helps me a lot. You don't have to do so, but it does help fund these videos that I hope to bring value to you.
Here is my stuff :
www.ppflatpack.co.uk
ppflatpack@gmail.com
/ ppflatpacklondon
/ ppflatpacklondon
/ ppflatpack
/ ppflatpack

Пікірлер: 72

@Elisa-ez3in 3 күн бұрын

dude you are a lifesaver!! I've hade my closet without doors for a month.I finnally have a complete closet! Thanks!

@raychiw9316 3 жыл бұрын

Just bought a second hand one and had a bag of screws and no instructions. I downloaded Ikea’s and they made no sense at all. You have saved my afternoon with these clips. Thank you so much 👏👏👏

@babyd755 2 жыл бұрын

A few things: Thank you for these videos! As you know, they're a huge help! The Zoolander poses at the end were just what I needed this morning, and your voice is reminiscent of the teachers that I wanted to listen to in school. Thanks again!

@PPFlatPack 2 жыл бұрын

Thank you for watching

@archiecross6600 4 жыл бұрын

Thanks mate. You helped out a Total stranger on the other side of the world. Thank you.

@PPFlatPack 4 жыл бұрын

Thank you for watching

@humlaetv8446 3 жыл бұрын

You are a hero! ❤️

@ProlificDelta 3 жыл бұрын

Very easy to follow! I got a free pax wardrobe from a friend that was moving, but it was in pieces and of course had no instructions, so I've watched all of your videos as they were life saving in figuring out how to put it together. Thanks!

@PPFlatPack 3 жыл бұрын

Thank you for watching

@azfi22 Жыл бұрын

00⁰00⁰000

@JLLora-mn3ib 2 жыл бұрын

Thank you for simplifying this!

@colinharper3714 3 жыл бұрын

Great clear instructions 👍

@natalie4396 2 жыл бұрын

So clear! 💥💪🏻

@dimche111 4 жыл бұрын

thank you, make my job easy

@JeSsAaAaLee 4 жыл бұрын

Hi, Your videos are making my life easier! I have a question though I followed your steps but the 8 inside pieces that get screwed in aren't completely flush when I put them in. I'm not sure what the issue is, do they need to sit inside the small gap between the frame and the wardrobe or should they be resting on the edge of the wardrobe. Any help would be greatly appreciated. Thank you!

@BrightSideFX 2 жыл бұрын

Life saver. Thanks alot

@holgerzimmer6884 2 жыл бұрын

Good work, thank you!!

@AdulthumanType 3 жыл бұрын

This site has been so helpful thank you

@PPFlatPack 3 жыл бұрын

Thank you for watching

@johannarenouf3935 8 ай бұрын

This video is really helpful i wish id found it before id built the wardrobes. Im not atraching the rails and have realised my wardrobe is upside down. Will it still work if i use the bottom rail at the top and vice versa. Thanks

@lpaprocki 6 ай бұрын

Thank you so much for this video! We really want this PAX with sliding doors. However, the height of the place where it will sit is 80" or 203.2 cm in height. I believe that the grey plastic pieces that side ontop and help hold the top rail will make it too tall in those places where they sit! Do you think that we could skip using those? Will the long two screws that go in the front and the 8 smaller grey plastic pieces that get screwed inside to help hold the upper rail will be enough? We have a higher ceiling in the rest of the room - so we can assemble upright and slide it into the space easily. With th grey plastic pieces on top can you confirm the height where those pieces are? Thank you so so so much! This saved me a possible nightmare if I would have purchased...need to know if it will fit first!!

@parikarimnejad 4 ай бұрын

thank you for great explanation 👍

@elitas9027 4 жыл бұрын

Hi, Thank you for all these amazing videos. We are just putting our PAX system together but when we stand it up we only have 6cm clearance. Do you think we can still install the top rail or is there a different way to do this?

@PPFlatPack 4 жыл бұрын

Yes it is possible if you need to build pax frames upright here is how you do kzfaq.info/get/bejne/n6-lpN2GvdW2Zac.html and 6cm is enough to put the top rail up. I did with 2cm clearance 6cm no problem.

@jonreeson2432 Жыл бұрын

Thanks 🙏 very helpful 👍

@murphyandmurphybrand 4 жыл бұрын

Great videos, thanks

@PPFlatPack 4 жыл бұрын

Thank you for watching :)

@kaiserleo1383 4 жыл бұрын

i made a mistake i drill the front then i notice it was too big for the screw ， is it possible to put more screw along the front board? collision? thanks in advance

@Esther10045 Жыл бұрын

Nice video! Do you think I can put this system on IKEA KALLAX shelf ? If not, do you think there is a way that I can put the sliding door to ikea kallax ?

@waxon4501 3 ай бұрын

Very useful, thanks 🙏

@CptCarbon 4 жыл бұрын

Hi, i have a pax 3m. Do you know how to Assembly the Doors for this Corpus? I have 4 corpuses,75cm each and two big doors. But there is no rail to connect the complete area, only rails for 1,5m. Can you connect the rails somehow? It drives me crazy...

@lso1991 7 ай бұрын

Great video, followed it to install my wardrobe. I have a question which i hope you can answer. I have 2 x 100cm wardrobe with 2 sliding doors, but i want to add another 100cm wardrobe to it. Is there a way i can have another sliding wardrobe, so having 3 sliding doors. So cutting the rails and adding on maybe? Hope you can help. Thanks

@ktube3054 3 жыл бұрын

Hello....I know this doors come in pairs, but I can only fit 3 cabinets of 40". I would like to have 3 sliding doors of the same size, but Im not sure if the rail would allow me to do so, given that its meant for pairs, not 3 units. Can the rails roll over 3 cabinets, instead of only two?

@pisulina1978 4 жыл бұрын

I would like to know how much space from above the wordrobe is needed to assemble sliding doors. The hight of the place for the wordrobe is 236,5 cm, the wardrobe is 236,4 cm. The room is 255 cm high.

@92ilovepancakes 3 жыл бұрын

Hey, thanks a lot for your videos, I found them very helpful! I've got a question though - is it possible to adjust the sliding doors in a way that there is a small gap between the door and the ending panel ? In my case the wardrobe is right against the wall and it would make opening the doors easier (putting your fingers inside the gap)... I thought I saw it in one of your videos, but I can't find it now. Thanks

@PPFlatPack 3 жыл бұрын

Here is the answer to your question kzfaq.info/get/bejne/nLqmn9Cer9rXZ5s.html

@hakunamatata289 4 жыл бұрын

Bless u Brother.. I am fucking around 3 hours already with on door without your video I would have lost my shit. Been building ikea stuff since 13 hours already.. And the plan is not understandable at all. 🤣

@oleglishchenko4922 4 жыл бұрын

Very useful videos, thank you! One question: where are the rails coming from? Are they included with doors or sold separately? Thanks!

@ramzez_uk 3 жыл бұрын

They come as part of the doors.

@oleglishchenko4922 3 жыл бұрын

@@ramzez_uk Thanks, already bought and installed 2 months ago

@rainbowdash1203 2 жыл бұрын

Can the doors be worn from the side?

@BokTan 2 жыл бұрын

I had the white plastic ring fall off, and now the inner door squeaks whenever we slide it, how do i fix it back?

@sirslime1687 Жыл бұрын

Hello sir. Little question.. do I install the insides like the drawers and rails first or the sliding doors for the PAX. Thanks so much 🙏🏼

@PPFlatPack Жыл бұрын

It works both ways. I usually do first sliding doors first just for easier access from inner side if need.

@cognitiveinterests 2 жыл бұрын

Lost some parts during a move where can I buy more

@KL-jk3gk 10 ай бұрын

Hi 😊I Always love watching yours videos, but this time I finally have a problem. I have some problems about my IKEA Hasvik sliding wardrobe assembly installation, I have no idea what happens. When I try to install these parts at the bottom, I find that it can’t fit in, it has some gap around the center area, how can I do, what’s happening? Why has a gap? Have I did something wrong step? I hope you can give me some comments or direction.😵‍💫🙏 Thanks

@PPFlatPack 10 ай бұрын

There is new version for Ikea Pax doors (different top and bottom hinges and rails) not sure if you have previous version or the latest one. If you have the new one here is the video kzfaq.info/get/bejne/f9Kon5iqqdjVZGw.htmlsi=bW8PNYUDI6KUo54T I don't have video yet for HASWIK doors. You can send me short video to my mail hard to say just from your comment.

@sharifsharif2396 4 жыл бұрын

Tnx for the video's. I have one annoying problem, my sliding doors do not close well. The left door is perfect below with the hairs closing very well. However the upper half side has an opening, making it not symmetrical. The right door has the opposite; the upper side closes very well, but the below half has an opening. Any advise?

@PPFlatPack 4 жыл бұрын

You can adjust sliding doors little but some time is easier just put something under one corner to lift the wardrobe little up. Other option there is adjustable legs sometimes you can adjust small gap this way. It is hard to explain there is more stuff to avoid this usually if you make pax frame right should not have the problem with doors. I will do video in sliding doors adjustment soon with all the details.

@PPFlatPack 4 жыл бұрын

There is one more option when doors on on side not lining up with side check this video you may find answer here kzfaq.info/get/bejne/iKtihbyTm9Goc30.html

@sharifsharif2396 4 жыл бұрын

@@PPFlatPackThank you...

@PPFlatPack 4 жыл бұрын

I think your pax frames are not in the right position. There is adjustment on the top hinges but before you do that try to put something under wardrobe one corner that may help.

@gabeloplay151 2 жыл бұрын

Can you make a video putting these door to a built in closet? We would like to change our built in closet door with ikaw pax door. Thanks

@PPFlatPack 2 жыл бұрын

Here it is kzfaq.info/get/bejne/l751gLqa3M25pZ8.html

@johnd5262 2 жыл бұрын

Not all heroes wear capes

@zaraceleste6049 3 жыл бұрын

URGENT! Do you get rails with the sliding doors? Or do u have to buy it separately?

@PPFlatPack 3 жыл бұрын

Yes you get the rails with door frame in the same box you can see it all here kzfaq.info/get/bejne/iJppbMdeqKioqp8.html

@evvelallahahirallah2650 2 жыл бұрын

Merhabalar benim de boyle bir dolabim var ve surgu kapagi dustu. 01.33 saniyedeki gri renkli aparatlar kırıldı lutfen onların adını öğrenebilir miyim

@jankowalski7360 3 жыл бұрын

Save my marriage.

@Crazyoldman84 4 жыл бұрын

Part 5?

@PPFlatPack 4 жыл бұрын

Part:5 kzfaq.info/get/bejne/g7ZpaaeTmNe2nmQ.html Part:6 kzfaq.info/get/bejne/o9SGqK9qqq6up2w.html

@mohamedabdullah6503 3 жыл бұрын

Thank you but where’s part 5?

@PPFlatPack 3 жыл бұрын

Here it is ;) kzfaq.info/get/bejne/g7ZpaaeTmNe2nmQ.html

@ramzez_uk 3 жыл бұрын

Your video has saved me so much time. Thank you very much. One question I have. My bottom door is not aligned with the side. The top is correct but bottom is slightly off and leaves a gap. Any idea how to adjust it ? Here the picture of the bottom part drive.google.com/file/d/1y4CaVVadaFYYTpRtMezlFzIxRkZKnPAL/view?usp=drivesdk

@jolavanhoof1204 3 жыл бұрын

I had the exact same problem. I solved it with a tip from PP FlatPack: You need to slide a small block or spacer underneath the left bottom of the pax closet, between the floor and the closet (in the front where you can easily reach it). Only 1 or 2mm thickness is enough. Push against the front of the closet, and then normally the front will lift a little. The unequal left gap on my door totally disapeared with adding a little spacer of 1mm thickness underneath!

@ramzez_uk 3 жыл бұрын

Jola Van Hoof if that’s on the left side I need to push it on the left ? I will try that.

@jolavanhoof1204 3 жыл бұрын

@@ramzez_uk Yes exactly