Rain Barrel Build - DIY step-by-step How To Set Up / How to Build / How to Install

Рет қаралды 24,413

4 жыл бұрын

Rain Barrel system How to Build build, How To Set Up, How to Install, with step by step DIY instruction and parts information. Complete tutorial for those with no construction or plumbing experience. Helpful tips on parts, and what mistakes to avoid when planning and designing your system.
If you want to hook a rain barrel system up to drip irrigation on a timer, this is the video for you!
Interested in keeping chickens or building your own chicken coop? Be sure to check out our other channel Lonestar Coops: / @lonestarcoops6889

Пікірлер: 61

@osorios007 3 жыл бұрын

I HAVE SEEN GOOD VIDEOS BUT THIS ONE IS MY BEST. WELL EXPLAINED AND WELL DONE

@alexrapada 11 ай бұрын

Great Video! you should make your video thumbnail of you inside of the barrel, that will definitely gather more views lol!

@clmitchell1166 Жыл бұрын

Thanks Tony this is exactly the video I've been looking for. Can't wait to start building my own.

@amylynnjoneshomesteaditch 2 жыл бұрын

Thanks for this. Love it.

@argentumman7116 3 жыл бұрын

This is one of the best (if not, the best) system I have ever seen. I love...LOVE the sight tube idea. Definitely an inspiration. Thanks for posting!

@jeffmann6187 3 жыл бұрын

Awsome Job! If I was smart as Tony id be counting cards in Vegas.

@MrDennis1152 3 жыл бұрын

thats one card ... oh that's two cards .... hey thats three cards wow poker is fun to count! I am the count!

@Leah1974 2 жыл бұрын

This is great! Now I know my summer project!

@alyciahindmarsh178 2 жыл бұрын

This is wonderful!!! Thank you so much for sharing your wisdom!

@sarikasabnis2369 4 жыл бұрын

These videos have been so helpful! I've been searching for a way to hook up my rain barrels to a drip system for so long. This is exactly what I was looking for!

@guitargeargarage1482 3 жыл бұрын

Awesome you have every vid step by steps and materials list under vid great channel will keep you posted on our progress once we get started the rain barrel system all subsequent vids make barrel system even better, solar pump in tub to solar panel wow it’s all there good work you did on job and video thank you Sir!

@ceciliosalamanca3299 3 жыл бұрын

Good suggestion in installing the uniseal the easier way. Boil the rubber uniseal to make it soft. Insert into the hole as fast as you can before it cools off and then install the pipe. The pipe should go in with a minimum push because of the soften uniseal. I did it and it works.

@arobertpetersen 3 жыл бұрын

Excellent video. Thank you for sharing!

@andrewhodges86 4 жыл бұрын

Excellent job on these videos! Extemely informative and at a very nice pace. I learned a lot from this one and the others. You have a new subscriber. If you get the time and you are short on content ideas, I'd love to see an in depth video about your drip irigation, including different material options, spacing, hole placement, etc. I'm going to get started on creating a very similar water collection system for my garden and the next project will be automation. Thanks for the great videos!

@TexasOrganicGardening 4 жыл бұрын

Andrew Hodges Thank you for the kind comments and suggestion. Yes I will be doing some more gardening and irrigation updates. I’ve been a bit busy the past couple weeks building a big 6’ x 12’ chicken coop, but will be getting some garden videos up soon once the coop project is completely built.

@TexasOrganicGardening 4 жыл бұрын

Checkout our channel Lonestar Coops for the coop updates. Just about done on a big video project on Deep Bedding, then will be able to get back to posting some updated gardening content I’ve been filming these past two months

@leerozycki7563 3 жыл бұрын

I love your video!! I am dreaming of my vegetable garden with a rain barrel irrigation set up just like yours. Your content is very informational, with great close ups of what your talking about. Thank you for all your work in providing the where what why and how!

@TexasOrganicGardening 3 жыл бұрын

Be sure to check out the other videos in the Playlist for detailed how to on each component. May be helpful

@tomdonahue8110 3 жыл бұрын

Great job! Thank you for sharing this with us.

@kevinzep01 3 жыл бұрын

Very nice - a lot of good information. thank you for taking time to document and share!

@walter.bellini 3 жыл бұрын

Great video and wonderful thought process and helpful clean and clear video! Thank you

@josiahsage7130 3 жыл бұрын

Thank you for the informative content. Going to reproduce this exact system.

@Melicoy 3 жыл бұрын

AWESOME. Thank you

@ceciliosalamanca3299 3 жыл бұрын

Boil the uniseal till soft. It is the best way to install the pipe.

@douglaswindsor120 2 жыл бұрын

You need a float switch to the pump so if the barrels run out of water it shut off the pump so it doesn't burn out yours is the second one I've seen with that in line filter I'm still trying to find one and that other comment is right by putting the over flow on the last barrel it doesn't matter whether it is 1 1/2 or 3 inches you are restricted to the size of your connector pipes between the barrels better to go with a tee on the inlet pipe and raise all the air vents above it that way the barrels all fill up to the top

@RussellBallestrini 3 жыл бұрын

New subscriber, you are a physical hacker! Way to go! I'd love a follow up video, I'm about to install my first barrel (was a birthday gift). My style is an old olive barrel, I'm going to be picking up the leaf eater too and then spending some time to figure out which downspout I want to work on first. AS for solar my whole roof is solar so if I end up finding a free pump I would likely just plug the pump in with a timer. Thanks again for the video, gives me much more confidence!

@Guanabana51 4 жыл бұрын

great job!

@vipahman 3 жыл бұрын

Watching this video makes me want to build one purely for entertainment as I don't even have a garden. LOL

@bastiandoen2583 3 жыл бұрын

you can do it in my garden :D

@TheBBQKEEPER Жыл бұрын

Thank you for the video. Working on our first project. I was wondering once everything is set up. How do you clean out any sludge or build up in bottom of the barrels?

@glumGlumm 3 жыл бұрын

I hate those hose you need a good clamp to make them really tight. I end up using pvc. I like your version.

@vadims8742 3 жыл бұрын

4:43 It is better if you place valves at the vertical segments of tubes. In this case you will be able to exclude each barrel. But it the way you done in the video you are able to turn off only all barrels after the valve. So, the difference is: every single barrel you need or all barrels after a given valve.

@vadims8742 3 жыл бұрын

Anyway, this is very clear and useful video! Thank you for sharing!

@Thefarmyard7633 3 жыл бұрын

I love how it is hooked up wit a drip system but can you water manually with pump on through a hose and sprayer

@TexasOrganicGardening 3 жыл бұрын

Yes if you didn’t need a timer for drip irrigation you could eliminate that and just use a hose and sprayer. The pump will provide plenty of pressure for that. You could try without the pump first but I don’t think the barrels alone would provide satisfactory PSI without it unless your garden is 20-30’ downslope from the barrels.

@joshuadaniels1410 2 ай бұрын

So the automated timer will automatically turn on the pump? Correct? You don’t have to do anything else to trigger pump?

@bronwyngardner7004 2 жыл бұрын

Thanks for your great video. If the barrels were placed higher off the ground would your drip system work without a pump? If so how do you calculate how high the barrels would have to be placed up off the ground to work without a pump please.

@mccaslan1 2 жыл бұрын

I also think that he didn’t need to put a pressure opening at the top of each barrel. One would have worked and it would add some pressure to the system.

@douglaswindsor120 3 жыл бұрын

By putting your overflow on the last barrel it doesn't matter if you have 1 1/2or4 inch overflow you are restricted to the size of your manifold the water going through to the last barrel will equivalent to a 3/4 inch overflow

@milvia2210 3 жыл бұрын

Hello... I hope you'll be able to answer my question. How you prevent the algea from your water? Great video keep up the good work.

@TexasOrganicGardening 3 жыл бұрын

Go with dark barrels to prevent algae and if possible a shaded location can be helpful also.

@MrDennis1152 3 жыл бұрын

@@TexasOrganicGardening mine are a blue color not dark enogh?

@Leah1974 2 жыл бұрын

So I’m assuming of I wanted to attach a soaker hose, I’d need to Install a pump?

@marksTips466 4 жыл бұрын

I've watched many videos on rain barrels and this was one of the best! Question: Would this pump work to connect to a garden hose to water your lawn using an oscillating or spinning sprinkler?

@TexasOrganicGardening 3 жыл бұрын

Yes, the pump outputs as much pressure as the hose bib on the house so it could run a sprinkler.

@FalconWing1813 3 жыл бұрын

Very cool video , I found the bulk head fitting at a local hardware store . But am having trouble with the part that connect to the bulk head and adapts to the PVC pipe. In your video it is a 90' elbow . Do you know if this part can be found on Amazon? what is it called?. thanks !

@Bonsai_Bentley 3 жыл бұрын

I changed my design after watching your video. Have you had any issues with the overflow being on the far end barrel? My system would look a lot cleaner if I did the same. Oh, just wanted to add that when installing a bulkhead the gasket should go on the inside. It looks like you installed the bulkhead with the gasket on the outside. That may be why you had leaks.

@CatalpaCreekFarm 3 жыл бұрын

This is an awesome setup..I have watched all your videos in this series for making rain barrels with a pump. I had a few questions. Do you need a PSI gauge? Where did you get your drip irrigation lines? Thank you so much.

@TexasOrganicGardening 3 жыл бұрын

Hi thanks for watching. You don’t need a PSI gauge, but I did buy one before installing them pump for troubleshooting. That’s when i confirmed that the barrels without the pump hardly provided insufficient PSI to go let the timer work. Timer requires 15 PSI. After that finding I added the pump. Drip irrigation lines were ordered from Rainbird.

@MrDennis1152 3 жыл бұрын

how do you keep algae or what ever that green black stuff is from your tanks

@aaronshepard3423 3 жыл бұрын

Are you in a southern state? I'm just wondering about freezing during the cold season here in MO.

@romeorauta8705 3 жыл бұрын

Same question here. Thanks.

@TexasOrganicGardening 3 жыл бұрын

Yes, we are in Texas and we did have a long hard freeze here in March. It is recommended to drain the system in the fall so it doesn’t freeze up. You would need to leave a drain open at the bottom or cover the inlet as well.

@sergeyyani3727 3 жыл бұрын

Did you think about staking two barrels one on top of other to get propper pressure of water without pump?

@TexasOrganicGardening 3 жыл бұрын

Excellent question. Yes, each 2.3 feet of height gets you 1 PSI of pressure. The timer requires 15 PSI so the barrels would have to be 30 feet above the timer to get functional pressure. That’s why I added the pump.

@_j_a_d_e 3 жыл бұрын

Is the largest center part of all your lids cut out and replaced with something else flat/black? When I picked up my barrels the seller warned me about cutting into lids as they can easily shatter. Thoughts?

@TexasOrganicGardening 3 жыл бұрын

The lids on the barrels are the ones that come with it. It is a screw ring and a flat piece. I was able to cut through them OK. There is more videos of this in the playlist.

@_j_a_d_e 3 жыл бұрын

What is the black thing attached between the coupler and the timer?

@TexasOrganicGardening 3 жыл бұрын

Thats an inline filter with a removable screen. One last filtration just to make sure no particles get into the drip irrigation lines. Will be doing an annual follow up and inspecting it in a new video to come.