Just want to help with your subtitles. 1. Cut the sand paper longer than you need. 2. Fold it, and make sure it lines up with the under side. 3. Fold the other end, and overlap it. Then make a mark by scratching it with a blade. 4. Make sure the glue is fully dry. 5. Lightly scratch the folded side so it will peel off easily. 6. Use clear plastic between the joint to prevent the glue from sticking.7. Add a thin layer of epoxy glue on both sides.8. Now you have a strong bond on the joint, and it will stay flexible. I realize that English is not your first language, I just want to help you out. BTW your video was very helpful to me. Thanks.

THE PEELING OFF THE TOP LAYER WITH GLUE WAS WHAT i HAD MISSED, THANKS!

Thank you. I personally grind of the grid with a bench grinder. Easy and fast. Just use a good contactcement. Never failed on me.

Great video, but by the time you have made 10 belts you could purchase a box full of belts with your time. I just butt up the belt ends and use packaging tape with the cord reinforcement and stick it on the back. Just make sure the sand paper is clean and dust free and use the tape lengthways for strength and not across the belt which has no strength. Takes just a minute to stick together and works great. No lumps at the joint as they butt together. For wide belts it’s better to cut at an angle or arrow shape, but still butt, no overlaps.

I do not think I will live long enough to see a finished product.

Mantap bang Jhon, saya baru beli belt sander dan rencananya mau nyambung amplasnya. Cara ini lebih hemat. Terimakasih tutorialnya

Great video great help Thank you bro.❤❤❤❤❤

You did it. I gave up. I have 25 yard rolls of 12” floor sanding paper. It’s a process but worth it. Thanks.

Probably a good idea to run the belt in a direction that doesn’t lift the flap

Who says that there is no alien on this planet. Brother you are alienly genius. Good job.

I cannot find belts for my old sander. This video has saved me buying a new one. Thank you 😀👍

Have been struggling with making belts , I'm sure this will fix those issues . Thanks for making a detail video

Watch it at like x2 to save yourself a lot of time. It's a good idea though for sure I've considered doing it in the past but wasn't sure it would work. Now I know

This seems like sooooooo much work to save a few dollars, but I do appreciated the craftsmanship involved.

Useful video. Thanks for making it. The music is distracting and unnecessary, but at least you provided the written description so I could mute the video.

I think you did a very fine job and procedure to make an excellent strong joint, However I would prefer you talking rather that that music, That is the only reason I can see for anyone giving thumbs down. that didn't make watching it pleasant.

45 degree cut. 2.5 inch wide strip of nylon fabric. (parachute material or simular) Butt up the joints and saturat the nylon strip with super glue. Place it even on the 45 degree joint and place saran wrap over the strip and clamp or firmly hold down for about 60 seconds. Trim excess material and let hang over night. I have made a few thousands of these. Most for me but some for other knife makers. They hold up, quick to make, very durable, and anyone can do it.

Very intructive process you are a máster on It. congratulations

Helpful if you need a specific size of belt and can't find it around you or they are absurdly expensive in comparison to the breakdown on rolls of emery cloth at the with and strength you desire. I'll probably know this the rest of my life and never need it till that one day I do haha.

Fantastic. Thank you very much

Best greaseproof paper lunch paper baking paper just a few strips of that totally none stick

good idea for belt sander. make your own grinder. I have the same glue. I have to try this. Thank you for sharing.

BANGGA orang2 Indonesia bisa kreatif dgn karya2 nya.. Sukses selalu Om Jhon Arief 👍🏽🙌🏽👏🏼👏🏼

Excellent video and process. Thank you for sharing.

the best video about how to make sanding belt i ve seen

Excellent video

Excellent job

excellent video and process

Pure genius thanks 🤠👍

BENDITO SEAS BROTHER GRACIAS FELICIDADES CHAMPION ♥️

Highly precision

I can’t believe I watched nine minutes! Oh well at 75 yrs what the hell...

Good educational video.. thank you bro 👍

Svaka vam cast postovani majstore stdacan pozdrav

Thanks, I often wondered how that wuz dun.

I was doing this as I watched it & it took so long, that I fell asleep on top of the sandpaper & when I woke up I had the sandpaper glued to my forehead

clever. thanks

This video convinced me to just buy the belts 😬

Great video 👍🏻

About how much cheaper is it to make your belts verses buying them premade not counting all the time, epoxy, knife blades.

Maybe another layer of clear plastic for the second glue? Good though

If I'm ever stuck at home under house arrest, I will try this method.

Really nice clear DIY. Well done, thanks.

Dear Jhon, thanks for sharing your very thorough process of making sanding belts. I was wondering why you remove the grit from the top side ? I can see why you need to remove it from the bottom but doesn’t it reduce the sanding area just that little bit. It may be that the thickness at this point would be greater than for the rest of the belt and so would bump, bump, bump each time the join came around and would get annoying. Cheers.

Great for odd size belts or when/if supply lies fail but I wouldn't invest the time it takes unless I had no other choice. I can more than pay for commercially made belts by investing my time otherwise.

bende yaptım ispiral elmas takıp zımparayı kolayca temizliyebilirsin japon yapıştırıcı da yapışıyor

With oven paper in between you will avoid to stick any part you dont want ( epoxy glue doesnt stick with oven paper

Thanks great info

Great job mate Really appreciated By the way Which song is that ? Do tell me if any one knows

Hi so good👏👏👏

Which adhesive is being used

God sir

very clever well done 10/10 what is the Glue you use.

Tuyệt vời 👍

Can you just do 30 degrees on both side then strip all 4 side with a file then you epoxy and add pressure skipping the treating both sides is it optional to treat both sides ?

Nice idea bro😊

keren

Nice video but I have a Qs. that when a new belt cost 2 bucks why waste time and energy to save a buck or even less? remember that to make a sanding belt you also need sandpaper and glue.

It would be easier to use melamine coated wood for clamping the belt together the resin glue will not stick to the wood as much as it does in your video

What a great Messi you are domingo man, better buy a belt. Oh god

Could please inform me of what type of adhesive did you use

can you do this with 3000 grit sandpaper? I really need it for my 36x4 ryobi flat grinder :P

Begitu caranya ,,💪

Which glue did u use ?

Please what glue do you use please

¡¡¡¡ COOL ¡¡¡¡¡ 👍👍👍👍👍

Great tutorial, please just don’t add any music...

nice job. what type of glue do you use.

hey want song is that? I can't find this version.

Huge amount of work and time involved, I know my time is billed at a minimum of $150 per hour, can I create $150 worth of belts in 1 hour or is it cheaper to buy ready made.

Sir your sand machine DIY or buy outside....very nice n simple

WHAT IS THE NAME OF THAT GLUE PLEASE?

Bro can you please suggest the glue suitable for joining.

Just do a 45 degree cut & glue a piece underneath takes 2 mins

Bang bang bang bang bang

Oh mate, it was sooooo looog i was in my 20s when i started watching phewww

WELL...i'm not a fun of belt sander because of kick of joint. I nevar found a belt sander without it.

👌👌👌👌👌👌❤️❤️❤️❤️

Nahh ini baru 👍

Привет из СССР 😊! Класс! Хорошый способ.

3"x18"?

What epoxy glue is recommended and how long is the glue left is the big question

videonya kelamaan mungkin bisa di percepat 2x

I just butt joint the ends, use gorilla tape, then iron heat to make it stick. Works great without all of this work.

Good, glue name?

Mezza giornata di lavoro per risparmiare tre euro di carta vetrata? Mi pare esagerato.

why did you apply epoxy first and then peal it off?

Witch name of joint tube

life's too short - buy a new one!!!!!

Hi What Kind of epoxy glue use?? Thanks

Does the glue joint minus grit have much of a bump..bump when in use.

Epoxi not TOO much.

I think I'll just go to my local supplier.

Kumaha Rief. Sehat?

What is your choice of epoxy and does home centers have it.

Thanks for sharing this. It is useful for belt sanders with non standard width (like belt sander's adaptor for angle grinder). Just question: what kind of epoxy do you use? 5minutes instant cure or one hour-cure? Definitely not Dextone steel epoxy right? Since it doesn't have flexibility to bend once cured.

Hy hello

I would put you perfectly but I put you extremely well, because there is a way to avoid all these measurements! I will not tell you how, I believe that if you watch your video carefully you will understand! Thank you very much

Amazing! Subbed for surw