Sand Belt Joint Technique

Рет қаралды 24,430

Жыл бұрын

Sand Belt Joint Technique
How to Joint Sanding Belt Firmly
Sanding Belt Joint Method
how to joint sanding belt
sand belt jodne ka tareeka
Diy sand belt joint
Diy sanding belt joint
diy belt sander
furniture workshop
#wood
#diytools
#workshoptools
#diy
#tools
#woodworking
#carpentry
#engineering
#furniture
#woodworkingequipment
#woodenworkshop
whatsapp.com/channel/0029Va6l...
/ @reformationworkshop

Пікірлер: 19

@user-vt1hs1op2l Ай бұрын

Very good technic

@ReformationWorkshop Ай бұрын

Thanks

@skippylippy547 11 ай бұрын

Great idea. I'm going to try this. Thank you for showing us how to do it. I have many broken sanding belts to repair.

@ReformationWorkshop 11 ай бұрын

Thanks for feedback bro

@RT-Ford 8 ай бұрын

I purchased a box of 1 x 42 inch sanding belts at an auction for a couple of dollars. Apparently, they were pretty old because every one of them began breaking at the seam when I tried to use them. I tried every glue I had attempting to repair them. Nothing worked. Finally, I stuck a 1 x 6 inch strip of duct tape across the seam on the back of the belt, laid it on a marble slab that I have on my work bench and used a roller to make sure the seal was good. It worked like a charm.

@ReformationWorkshop 8 ай бұрын

Yes ducting tape is good in function But probably it might be fail on high speed or exceeding the pressure of workpiece. Please let check and tell me, I would like to know that.

@RT-Ford 8 ай бұрын

@@ReformationWorkshop So far it has worked for me but you made a good point. I don't use a lot of pressure when using my 1 inch belt sander. I have a larger disc sander that will 'take a licking and keep on ticking'. I'm putting new tips on cue sticks, so there's very little pressure needed.

@ReformationWorkshop 8 ай бұрын

@@RT-FordYou're right Due to less surface area, less pressure will be required on sand belt.

@matinuslayen6166 10 ай бұрын

👍

@johnnyhofer9656 2 ай бұрын

What kind of glue to use

@ReformationWorkshop 2 ай бұрын

Epoxy resin

@user-mc7gf6mr9t 9 ай бұрын

Клей какой? Можно использовать

@ReformationWorkshop 8 ай бұрын

You can use epoxy resin or Pidilite Araldite Epoxy resin

@Allegedly2right 9 ай бұрын

Why would I bother saves you how much £££

@eglpiyasiri7232 9 ай бұрын

Gum name??

@ReformationWorkshop 9 ай бұрын

Araldite

@khanhphaminh1175 10 ай бұрын

Nice

@perillodanisi2505 11 ай бұрын

Nota: epoxy glue in 24 hours is ready but the more time the better. I use to put it in the sun light for about one hour at noon. It helps a lot to cure the epoxy. Other is to use clear epoxy glue, it is more flexible when dry.

@ReformationWorkshop 11 ай бұрын

U r right bro 👍🏻