Your video helped me prepare for a quick and easy install. Thank you. Tip for future installers, the bezel can be removed from the front. After you remove the anchors in the rear, head to the front of the bumper and enter your pry tool in the top of the bezel and shimmy it out with no trouble. Another tip, there's some play in the tow hook which changes its angle sticking through the bumper. make sure it looks straight before tightening down and closing up the wheel well.

your video might be the BEST, "how to" i've ever watched! Great Job!! BTC

Tow hooks should be standard equipment on 4x4 trucks, I have a 2018 Ram no hooks on it, for $52000 it should have them, geez I had an East German car (WARTBURG 1000) in UK in 1965 that had them for pulling out of snow etc.

Great video! I just installed my tow hooks last night. Tow hook installation was easy, bezel remove was definitely the hardest part and took the most time. Dont know how you get these videos done holding a camera, but thank you!

dig the parkway drive intro

Pro tip whenever accessing anything from the wheel well.. jack up the vehicle let the suspension drop and you’ll have a little more room.. but for 60seconds work removing the wheel makes life a lot easier 😅

Outstanding video. I am getting a new Ram that does not have the tow hooks. Now I will add them with this knowledge. Thank you!

Hey Tony !!! I pried these bezels loose out the front with my bare hands and fingers using a flat head screwdriver and gathered Up the lock rings

Just about all you could ask for in a how to KZfaq video. good work. I'm going to get this done on my 19 Laramie 1500.

I assume that's a Big Horn yeah? I just traded my '19 F-150 in for a '20 Big Horn Night Edition and I LOVE IT...looks exactly like yours! RAM has such a better understanding of making quality interiors. Also, thanks for the video man. Much more frustration and sweat would have been required without it. Thanks!

My towhooks arrived last Wednesday. I’m gonna install them Saturday morning. Thank you for the video. In fact, love all your videos as they are EXTREMELY helpful. Thx

Installed my front hooks as well, toughest part is honestly getting to the 2 screws to loosen the bezels and tighten the new ones. Other than that, pretty straight forward. Luckily mine came with bezels and I didn’t have to cut my old ones with a Dremel like some people did.

Torque specs were very helpful. No directions came with my hooks. Thanks for the video!

Thanks Tony. I couldn't figure out why those long bolts, already in the frame, wouldn't drop out. Found your video and found out why. Hard to get in there to bang them out, but finally did. Unfortunately the parts supplier sent me the wrong bezel kit for my Ram 1500 DT, must have been for the DS Classic model. I cut out my solid bezels to make it work and will go back and get the correct ones.

Great video thank you so much for sharing the info. Just bought a 2022 and looking to put tow hooks on it

Thanks for sharing, I purchased the tow hooks and bezels. I actually had my tow hooks powder coated red. It took me all day to install because I didn't have a jack and the long bolt took forever to come off.

Thanks for the video.

It is easier to remove covers from the front outside of truck.just take a small pry bar and gently pry down they pop out easy and you don't damage the bottom placement hole setting

Damn fine job, sir. And nice camerawork for such a tight space...

Big shout out for the spot on instructions!

Can you try and provide an updated link to those tow hooks as long as the inserts, also what bug deflector do you have? I like that also.

Ordered hooks and bezels from Mopar discount parts website and received the wrong bezels and no bolts for the hooks. Your video is very informative. Thank you

Thanks for the video, it was indispensable for my install.

Very nice job; much appreciated! :)

Awesome! I couldn't figure out how to get that long bolt out of mine and was about to take it to a shop and have them do it. You probably saved me 200 bucks! Thanks!

Great vid, thank you for the help Tony! Couple more missing pieces of skin but the truck looks way better! Cheers!

I thought I might install hollow bezels and use each bumper hole as a single foot step when checking the dip stick or topping off fluids. Was able to reach in between the air dam and bumper and loosen the top 8 mm nuts with a wrench by feel, without turning the wheel or removing the wheel well trim. Don't need to remove the nuts, just loosen each nut and pull the nut and screw fastener combos back together. Then press down on the bezel top from the inside and pop it out towards the front. My 2020 did not have or need bottom retainer washer clips. Install of hollow bezels was similarly easy if you feel from the inside to have the bottom knobs fit inside the two holes. Foot fits in the hole great, the chrome metal bumper easily supports my weight (175 lbs), and the bezel protects the bumper from shoe scuffs. However, balancing on one foot means you have to support yourself with one hand and only have one hand free to work, negating the advantage. Also, the bottom of the bezel is not fully supported by metal so the bezel could deform or crack with repeated use. Also, the open hole is bad for aerodynamics and would allow road salt to get inside the bumper and blow onto the air dam joints. Best to keep the closed bezels if you don't install tow hooks and just use a shop stool big enough for both feet when working on the engine bay.

Awesome video step by step instructions I’m about to do the exact thing thanks

Dude nice installation video!

Thanks for the video and for the product links. Just ordered everything to do this as well!

Great video! Installed mine tonight. This made it a lot easier!

Thank you. Made my install super fast!

Nice clear instructions, good job...

Seems simple enough. Thanks for the video!

What happens if that 18mm bolt becomes loose? Does that screw grab something else besides the hook?

Thanks bro

Fantastic install video. I can know install with confidence. Going to put these on my 2019 blackout edition 👍😎

Thanks for the video was helpful and made the job a piece of cake!

very insightful thanks🤟

that's a good and very informative video. thank you

Thanks Tony!

Saved me some money, thanks!

Thanks for the detailed post

Thanks

Great video. Your details were helpful.

Great vid. Thanks. Every 4wd ford and Chevy I’ve ever seen has factory rescue hooks. I added them to my 2wd Chevy. It was pretty easy and they’ve proven very useful. Looking at Some used Ram trucks now. What does that long factory bolt do? Could anything get out of place before you put it back? Thanks

Great video. Awesome job!

Cool,so when installing the long bolt that had the retaining washer,you don't need to replace that too?

What's the part number at that 18mm long bolt? Mine broke

Excellent video very well explained,!,!

Good vid. I have a 2019. I’m just wondering why? Really serve a purpose, just in case or look cool?

Thanks man!

Thanks for the video

Anyone know if these will fit a 2021 warlock model?

Can you post link of parts I can’t find

does anyone know what that is rated for i cant find it

Thanks for the vid! I have the same wheels as you do. What kind of tires are you running, and is your suspension height stock?

Can Install them on 2022 ram classic warlock.

I can't believe these are not factory equipped. Even Ford puts tow hooks on every single 4x4.

You can get the tow hooks cheaper from other places. The prices that I found, you over paid any where from $50 to $80, but great video.

Hey how do you like that bug guard? Do you notice any rubbing on the hood from diving?

Do the OEM hooks come with bolts

Nice!

Hi Tony, hey sorry to bother you but what size are the bolts that came with your kit? I purchase a kit but didn’t came with the bolts and the sellers isn’t the greatest

Hey Tony - Thanks for the vid. I just tried to install mine and the long 18mm existing bolt on the truck tried to round out on me. Any suggestions?

Where can I buy the mosquitos deflector (front end of hood)

What tires did you upgrade to at the time of the video? I'm thinking of getting some all-terrain, but not sure which to choose from. Thanks!

I just got my 2019 ram big horn v6 you think this is the same set up as yours I know you got the v8 hemi

What wheels and tires are you running on your truck? And do you have a leveling kit?

What was the total cost of this project? Also man keep doing videos like this, its nice to see detailed videos about installations.

Unrelated, but are your headlights tinted?

What size tires are you running? Do you have a leveling kit?

Hi Which side rails did you install and do you have a video for those?

Where can i find red tow hooks? or would you recommend plastidipping oem hooks?

What kind of tires are you running?

Will this work on the 2021 ram sport?

holy shit thats harder than installing a set of side steps.

What kind of tires are those?

What size tires you running? Duratrac

Any downsides? Mpg? Etc

Will this work on a 2021 Ram 1500 classic warlock?

What size are those rims ?

What tires are this ?

👍👍!

Do NOT hit the Servo Activated Air Dam. Just had to have mine replaced, $900.00!!!!!

😎😎❗

Anyone know if these will fit a 2021 warlock model?