The reason this is creating moisture is because your vents (the little brown plugs - 3 each) are plugged up or pushed too far in. Pull them out, clean them and just put them in. They are vents for the lights as they heat up and cool down with humidity.

Thanks so much! 2018 Ram 1500. Same issue, same light. Threw up a Hail Mary before buying a new assembly & came across your video & you saved me not only a lot of money but a lot of of time AND made me look cool in front of the wife for “DIY” approach. So thank you for figuring that out! Definitely a new subscriber!

Thanks a lot for a great and fun explanation of how to get the lights out - what a hassle!

10mm w extension I know worked on the Passenger side instead of taking grill off. Hope it works for drivers side too

How detailed you demonstrateed it' was AWESOME❗👍👍

Thank you so much for the video but here in the states it's freaking cold to deal with this shit waiting on warmer temperatures thanks again will save this video when its time to do it.

The reason it gets full of condensation is because there are o think 3 plugs on the back of yhe headlight. These are vents and for some reason the caps got pushed in too far and closes off vent not allowing cavity to breath. You have to pull these caps out so they are fully retracted but stiill in plug hole and you won't have any more problems 😊😊

That was a very clever little fix. Nice job !! 👍🏻😃 Trev

Love the videos as always Cory, Marcie is too gorgeous. Details and explanation is everything. Thanks for sharing. ☺️💕

Nice video. On a RAM 3500 it is possible to the lower bolt without removing the grill. When replacing the lower bolt I taped it to the socket so it stayed using blue painters tape. Also there are 3 light brown colored caps that vent the headlight assembly. It’s a good idea to pop them off and check the black insert to be certain they are not clogged.

Hey Cory and Marcie! Geez, nothing like dismantling half of the front end on your truck to fix the condensation problem! I’m seeing on KZfaq that the Promaster chassis [that so many Class B manufacturers use] have the same problem…guess what!…yup, I’ll be buying a Class B (hopefully soon) built on the Promaster chassis as well. Must’ve been a Dodge architect who had a bad day with a hangover when he drew up the plans! I just love having problems before I even obtain the ‘problem maker’! 😂😂😂. Good to see y’all again! Stay safe and happy travels! ~Jim~

I just wanna say thank you very f…g much!!! My ram looks cool now 😢. The people at the dealership didn’t want to help. Oh but to buy the car from them they offered everything but now they don’t even answer. You’re awesome bro, thanks again 🙏🏼

You messed up when you sealed that vent with silicone. You should leave it open so that air can circulate to allow the moisture to escape 50 bucks says you have the same problem again next year.

Great video, helped he out tremendously.

Your problem could've been the air vents were too tight. This is a common problem on these 4th gens. Always the driver side. Theres like 3-4 vents thats pushed in too tight at the back and needs to be pull out a bit for the headlight to breath.

Thank you 🙏

Do they have vents I have a 2018 ram 1500 thanks for the

Omg Thank You 🙏🏼

Hiw do I readjust the projector after it falls from over adjusting it

Stupid plastic headlight pods are garbage. Bring back the old glass sealed beam. Not only do they not fog or scratch, they melt off snow and ice.

why didnt he address the vents ?

I heard it was that the vents were pushed in too far...I don't think this is a permanent fix? There is a bulletin about this problem with these lights.

Can you watch a video on how to coil your extension cord please? 😂😂 mine looks the same😂😂

Do you happen to be current or ex leo?

So you never actually fixed the problem Just dried them Out

But u did not solve the issue😅

If I had to remove the whole headlights out like that, I rather replace it with a brand new one.