Rancher 350 Front Wheel Bearing Replacement

Рет қаралды 26,082

2 жыл бұрын

This is a short video of how I replaced the front wheel bearings on a 2003 Honda Rancher 350. This is on a 2wd model. #ad
(Sorry for the background cricket noise. The beauty of living in the country)
Link for Bearings and Seals
ebay.us/ZRrHOM

Пікірлер: 26

@scott6052 2 жыл бұрын

Learn a lot from your videos. Rebuilt 450 Foreman a few weeks ago after watching your rebuild video. Everything worked perfectly.

@FourwheelerDoctor 2 жыл бұрын

That's what I like to hear. Glad I could help and thanks for watching.

@darrenwilson7688 5 ай бұрын

Success! Once we figured out how it came apart it was a cinch. Great video BTW.

@philipjean1086 2 жыл бұрын

Great videos good info,a real shop, innovation and some humour. just as soon watch your videos than anything else on KZfaq Thanks

@FourwheelerDoctor 2 жыл бұрын

Thanks and thanks for watching. I'm uploading another as I type so stay tuned!!

@phillipaverre8392 Жыл бұрын

Subscribed. Love your videos. Keep them coming!

@FourwheelerDoctor Жыл бұрын

Thanks for the sub and thanks for watching

@scottcatalanotto 2 жыл бұрын

Mine was stuck as well so I used a pully puller I put the rim back on just enough to get the bolts on and put the puller inside the rim and pulled the hub out with it.

@thedudeinthestude6442 2 жыл бұрын

Keep making great videos!

@FourwheelerDoctor 2 жыл бұрын

Thanks for watching dude!!

@ericfix0521 2 жыл бұрын

Im rebuilding a yamaha warrior, love the channel. I guess you dont do any warrior vids because they dont need to be repaired much lol.

@rickfink464 2 жыл бұрын

I'm refurbishing my '02 Yamaha Big Bear 400 4X4. I made a costly mistake removing a bad wheel bearing. Long story short, I couldn't find a used knuckle and had to buy an old new stock knuckle for shy of $300, since they don't make them anymore.

@FourwheelerDoctor 2 жыл бұрын

That stinks but it does happen from time to time.

@redneck-_-reaper4027 2 жыл бұрын

Ty for the vid it helped

@FourwheelerDoctor 2 жыл бұрын

Thanks and thanks for watching

@rowneyt 2 жыл бұрын

From who did you order the bearings from? Were you pleased with the quality & service? Looking to do the front on my Rancher 350 & suspect OEM Honda prices will be quite high.

@FourwheelerDoctor 2 жыл бұрын

I'm pretty sure I used some bearings off eBay by all balls. I have pretty good luck with them and in my past experience with Honda bearings often times they don't come sealed where the aftermarket ones do. Granted there is a seal on the outside of the drum for the bearings I don't see a drawback of having two seals to keep the bearings clean.

@rowneyt 2 жыл бұрын

Thanks Doc, I’ll check ‘em out.

@mrnotnomis 2 жыл бұрын

My inner bearing stayed on the spindle. Any ideas on how to get that thing off of there? My gear puller won't really fit behind it to pull it that way.

@FourwheelerDoctor 2 жыл бұрын

I have an air chisel I normally use. If you don't have one of those you can always cut it off with a cutoff wheel.

@mrnotnomis 2 жыл бұрын

@@FourwheelerDoctor Thanks for the reply. I am going to see if I can heat them up enough to slide them off. If not, it's the cutoff wheel for them. I already ordered a new set.