Thx 👊

Thx 👊

Thx 👊

Thx

Thx 👊 appreciate it

Thx 👊

Assembly tomorrow 😉

@@Airbuks yes!!!

Dank je , een namiddag schieten wat je ook doet is altijd leuk 😉

Same experience here 1005-1012fps is my sweet spot for a lot of different slugs

The good thing is that we have a ton of ammo to choose from in 22cal 😉 the downside is that you need to test a bunch to find that one that works just a little better then the other one 🤣

Thanks 🙏

Thx 👊 sadly enough I am not allowed to hunt otherwise there won’t be any squirrels 🐿️ left 😉

Griffin 22 , never heard of them but I will have a look

👊 en van waar ben je ? Of spreek je Frans ?

@@Airbuks Ik woon niet ver van de abdij waar ze de beste trappist ter wereld brouwen in de hoofdstad van de hop in België.

@@j.verfaillie5742 dat is niet zo heel ver van de kaseistampers 😉 al is niks verweg in België 🤣

@@Airbuks Gelukkig is je stadsnaam maar geschreven met een "s".😅.

I didn’t have much time to compare it to other mods , but I did like the lower fuller sound pitch it makes where I know the Huma has a higher pitch . But in terms of performance the do a equal job in noise reduction

That was my plan 😉 but it seems the back part of my Panthera has some different parts 🥴 and so I don’t have these cutouts to mount the display

25

I have tried h&n 34gr and are great but I need to order some 😉

Yes you can no problem , just have to make sure you don’t do this with 300bar in the scuba bottle when you only have 250bar bottles on your gun

@@Airbuks no I l always under max rifle pressure. Thank you

Thx ! These are some 34mm element optics rings high version

@@Airbuks looks good bro

I believe they said the valve is too thin and they have a thicker one to fix it??

The valve got upgraded indeed to a thicker one , if your in the US you should contact Utah airguns

That was the initial intention to make a video . Started recording stuff from the moment I left home but once I came to Utah I met so many people , had a lot of fun that I didn’t want to waist that over constantly being busy with “ oh I need to fill this and that and I need a shot of that etc “ maybe next year then I know what to expect

Yes I have a video converting to a hunter . Very accurate results at 50m in 22 cal but I prefer it in the longer configuration with slugs

I think mostly for the 22nrl /PRS game although some matches can be shot with different calibers. I personally did it as 22 ammo is widely available in many variations and is a little more cost effective. For the Panthera the 22 34gr and 40gr slug use already enough air with only a 300cc tank on board 😉 Also it was mostly advertised as a competition gun in the 22 cal class . Building a Dynamic in .30 now 😉

🤔 I might be able to help you soon , I ordered a 177barrel and will see if I can give you some advice. First time for me in 177 though

@@Airbuks Cool it is what we Danes are locked to if we do not have a hunting licence. FAC at least. It is still cool though, i generally shoot 82 - 86 M and have little problems keeping my shots on 2" splatter targets. But just 13 gr Zan, i have tried 16 - 20 gr in all the brands i can find but they just will not work good for me, and i spent at least 2 tins of each weight - brand / model trying to dial my Maverick in ( both std barrel and heavy liner ) I saw one of the south African guys shoot H&N just fine, but i think ts a .22 rifle with .177 barrel and probe, the hammer weight might be a .22 one. I tried to copy his settings ( 150 BAR regulator pressure ) Mind you i have also tried heaver hammer weights, the stock one in my Maverick will not push 13 gr faster than 1000 FPS., so heavier stuff tend to fly slower than the best speed. I have generally tried from 830 FPS and up to +1000 FPS speeds. 20 gr slugs at +1000 FPS, that is some serious .177 smacking power. 🙂

Didn’t measure it but indeed it is long 😉 but no problem for me . Still oké even PRS

@@Airbuks nice, good looking set up 👍

🤣 you must be joking 🙃, no I don’t sell it as I enjoy it to much !

@@Airbuks no, am not joking if you need to sell I will buy it really but I don't know yours how long I saw looks like 700 or 800 one maybe little long one for me I Like 500 or 600 only. I use to hunting squirrel only.

@@THAUB8LeejTub mine is a 700mm but I am not selling any of my setups as I need them to make videos 😉

I agree, just ordered my panthera 700 .22 cal and I feel like will regret it, my .22 Fx impact is shooting jsb ko like a laser beam

You guys are correct 4cm isn’t acceptable I do agree and I believe you could see this on my face ! But did you watch and listen the whole video ? Explaining certain stuff that might explain why that group is that size ? That at this particular tune the H&N shoots 10 shots in 10mm ! Simply showing what different ammo and headsizes can do on target with the same tune and that new owners don’t have to get frustrated but do need to get to learn there gun . If you simply want to see those KZfaq channels that only show that one group that is exceptional in a whole day and not real life like everyone experiences, then this channel isn’t for you 🤷‍♂️

@@Airbuks first thank you for your effort in this airgun industry , yes I saw that at 1000 fps your group was better but I’m just disappointed that the Panthera isn’t really better than the impact at the end of the day. But anyway I’m getting mine in two weeks hopefully I’m wrong about that !! Cheers

@@hilavich in my opinion the impact will still be king 👑 but there is something about the Panthera that I really like . Is it that it’s more a rifle style or that it gets me to shoot in a different way I don’t know . It’s definitely a slug shooter for most but I am building a dynamic bench model to see if it can beat my impact 30 cal competition setup

I work for a major gunshop in the UK 🇬🇧 and fx guns are always having accuracy issues,we sold over 20 pantheras and all were sent back to fx because of this isdue

Have you checked the valve ? If you have one of the first generation Panthers you might have the thinner valve pin that was upgraded later on to a more beefy one . If this is slightly bend you get FPS fluctuating and suffers in accuracy. The pressure fluctuations might be caused by thick grease used on the regulator

@@user-gr5ee8yx7e hi , can you do this in English? 😉. Dirt idea is that the 160 bar reg is to high

@@Airbuks I think it's my settings. I just can't find the point where the rifle shoots properly. I swapped the slug liner for a superior pellet liner. The groups have gotten better but they're still not really good. My settings at the moment: Reg =160 Macro=17 Micro=3.5 JSB Exact 50.15 Gr 860 fps

@@user-gr5ee8yx7e oke 👍 , what length of barrel are you using and what projectile do you want to shoot 50gr slugs or pellets and what brand ?

@@Airbuks Ok what is the optimal reg pressure? .I can't find any information for reasonable tuning for the Panthera .30 600. Maybe you can help me?

No problem, but you clearly didn’t understand the purpose of the video 😉