I’m in Canada and I live on a dirt road. I’m cleaning my carb 2 times a month lol

17:55- aww damn😅 Did the same thing recently, that can be frustrating. Thanks for the step by step again. These vids are much appreciated because of that, along with the tips.

Yeah, that's the thing with owning a fleet of motorized bicycles. Sometimes those fixes can get piled up. Your bikes sound and look great.👍👍

Your mistakes like "put the cylinder on backwards, I sure did" and "if that wasn't a big enough kick in the nuts" are one of the reasons I subscribe to this channel...makes you very relatable...you keep it real and you should make a "mistakes out-takes" video...and on the subject of break-in oil ratio (16:1) my take is it is for getting the "dry" engine lubed up and avoiding piston/cylinder damage (it actually slows the break-in of such) also it has been shown that anything richer than 20:1 provides no extra piston ring sealing...so in conclusion I would run 16:1 or a new engine but no richer than 20:1 for a new top end break-in.

Thanks again for another useful video got this saved to the 2stroke Playlist so I can easily go back and watcher again if I come across any problem 😀 thanks bro

Love your work man

I hope you're doing well, my latest nightmare / project is a Honda ruckus. I need to replace the gas tank & cap . It was left unused for 6 years. Sigh, vids when I dive into this !

Omg you have main double stand , epic🙏😎

I love your videos bro keep it up

I would love to see a magician update!

Hey, cool video. Lot's of good info. Also concerning your gasket making techniques, wouldn't it be easier to simply trace out the old gasket you're replacing? Oh and what an awesome riding buddy you have. Say hi to Henry for me.

Seeing how things looked in that YD100, I would run it till it was starting to run poorly.

I love your sweet dog

La hover im enjoying this cooler weather too just about 6 weeks or so were getting 99to100 actual and feels like 103-105 of course a few nights ago it 50 degrees and i was freezing had to pull out a blanket

Quick question, whatever happened to Old Faithful?

Hey man i've been looking for videos on how to make these things softer but all i can find is videos on how to make them louder. You seem to know what's going on. Any suggestions?

nice

This is pancho from discord good video👍

Got some work to do on my bike too crashed her and broke my wrist but hopefully will be back riding in 5 weeks

After you put a new Piston and cylinder on the yd100 are you using 16-1 aka break in fuel again or are you going to just continue your regular mixture. Also how many tanks are you going to use to break it in?

Sometimes, making gaskets for chainsaws and trimmers to cut the round part for the cylinder bolts (in this case for the studs) I would place a ball bearing over the hole and punch it with a hammer, the ball will cut a hole on the gasket by pinching it when it accomodates on the stud hole.

Would u recommend the zeda triple 40 firestorm or the Zeus t 100, I'm about 200 lbs and I want to use a 36 sprocket

Don't feel bad I mite of done it when I was younger. Hay when r we goin 2 the motoos. I'm still buildin my chopper. I also found out it's a quad 40. Bore stroke intake & exhaust. I'm mostly waitn on a front cnc mount. Cause the frame is so long. Reoder it twice. Cause amozon prime lost it. I've been havin trouble findin a rear wheel 4 it. I'm runnin a 26 on the front on a dual springer. The rear a 24x3 tire. But the problem is the rear frame is 4 1/2" axel openin. So I need a 4 1/2" hub. On th rear wheel. Do u have any ideas ? Thanks. I'm glade y'all made it through.

My question is and I do appreciate your video clips on having trouble with but so I put them in and then Vegas connect to the bar. Pinhole on top it doesn't matter that's my question

I wish I had a friend or neighbor who knew about these bikes, just to kinda help me learn and get started on these bikes.... It seems kinda risky to start spending the money on these engines without the know how....

Hover What oil ratio mix do you run on your motorbikes ?

In your opinion, which motor is the one you like most...Iam wanting to do a conversion but don't know that much about the various motors. Any help would be appreciated.

Yo I was wondering, can you put a yd 100 cylinder and piston on any old china doll pk80? Like are they comparable?

It is frustrating that most piston kits and pins never come with the bearings but I found one on Amazon that comes with pin, clips (good ones) and wrist pun bearing for same price as just the pin and clips! It's from seller, "DONSP1986" I've also found other motorized bike items from this seller to be of the best quality. The best quality one can expect from redistributed Chinese parts that is.

I have a rough mid/high throttle on a zeda triple 40. Takes off great with good power but after I get it to mid or high she's nothing but 4 stroking. I'm still in break in and I'm running 16.1 ratio as the manual states. I have adjusted the NT carb. Any tips?

i wonder if its possible to have a electric motor force pressurized air thru the carb? like a supercharger

Good

mine makes really loud squeaking noises which seem like their coming from a bearing inside the shaft that goes from the drive sprocket to the clutch. the problem is they’re plenty greased and it only squeaks when it’s warm. and whenever I let off the clutch that really raspy noise progressively gets louder each time I run it. I don’t ride the clutch and I try to make sure the engine rpm matches my speed every time I let off so it’s not like I’m hard on it. oh and it only idles when it’s cold, not when it’s warm for some reason. I thought that was only a problem for larger cc 2 strokes lol

What oil gas ratio would you recommend for a 2 stroke motorized bicycle? Also what would you suggest a good way to seal an air leak where the carb connects to the manifold?

Have you ever changed a rod bearing on the crank and if so how do you go about it

You guys know if the yd 100 needs BOTH BASE gaskets that come with the kit?

How do u send pics on here so I can show u ?

So what is the top speed for the yd100? I want to change my bike for I can go faster but not too sure if the yd 100 we go faster then 37mph

Hello i was wondering if i should pull my head and check how my jug is doing have a second hand motor have no clue what the miles on it are prob close to 200 i do ride it a bit and some times it seems to strugle for a moment then its fine but can i just pull the head check and slap it back on if i dont mess with the gaskit just clean the suface i also have 2 spare jugs that have been fully ported not shure if ill use them yet think i may up load a vidieo if i find my jug to be dammaged just making a list of what to put in it at this poit hahaha

Ajuste de carburador the float end to top 21mm exact para que funcione y corra bien el motor

bro I was listening closely to ur first comment.u metioned something about a key way r u referring to the woodruff key it acts like a shear pin..I lost engagement I heard something give and immediately shut down although I noticed it was catching I heard a metal on metal snap and sound I believe I just sheared the key way so I did not attempt to driving but no it was catching I knew something was wrong and I heard it break so I just disengaged the clutch and peddled to do no further damage how easy is it to replace that Woodruff key do I need a puller I have built over 10 of these bikes sometimes you get better quality than others that's just the way it is with these. As I'm sure you know a lot has to do with the break-in and how you ride it I cannot emphasize Loctite enough where is it is able to be applied of course I'm not talkin on the head bolts tell when I get a new motor I like to take them apart and make sure everything is good this particular one I did not it was running perfect stock except for expansion chamber and NGK spark plug I have had other issues with these but never this happen do you have any advice I have six other Motors I use for parts my best build ever was on a beach cruiser I put on a hub adapter 32 tooth sprocket I broke it in with bigger carburetor and true expansion chamber although I must say my first tank of gas I would let it heat up without a load on it cool down ice cold and then after that tank was almost empty take it on a ride always varying the throttle that was my best build ever I kid you not bike went over 58 miles per hour once it was hot and of course something happened with that one that it got stolen it was my best build ever I was super pissed about that I love these bikes though they are the way to go please let me know if you have any info about replacing the key because I think that's what my problem is I know all about the clutch plate and pads something gave I hope it did not go into my case luckily had enough sense to turn it off immediately but it was trying to catch as if part of it was still there that's what tells me it was a Woodruff keyway young people call it a half moon I am familiar with the flower nut adjustment it is not that I have yet to take it apart but I miss my bike so I need to have one running again any tips you got for me do I need a puller I don't have fuel. That one came in originally

I like your vidio i love the 2 stroke and.dud old man i like that your strait up dont let the ass holes talk bull shit your doing a good job

Hover any clue in what blows holes in pistons?

It the yd100 actually a 100cc

15:10 what is that you are applying

KZfaq has stopped sending notifications where a channel someone has subscribed to has posted a video. If I had a way to do it, I would let them know that it is much better to get those notifications.

Speakerphone I'm sorry the clipse they just go in in the hole on top I I don't got to worry about

I have a question to you have you ever seen a 80cc with a cylinder and head one piece

Hey how much do u weigh?

Youre supposed to clip off the wrist pin clip ears. Two strokes arent supposed to have ears.

I click like like I think I could put these clips and just fine I think anyways what's the difference between in 80 my friend's got 80 and I got to 6680 I mean his has a lot less work and was cheep