I did this on my 2004 Toyota Highlander and it worked like a charm. Catalyst Monitor kept being not ready for almost 2 weeks. Drove all the way from LA to San Diego and back, still failed. Did 6 drive cycles of going at 55MPH on the freeway for 10 minutes, still failed. Did this trick literally one time and it passed in the first attempt. Thanks!!
@RANDOMFIX Жыл бұрын
Glad to help, thank you for the great feedback. I can only imagine how much you spent on fuel on the highlander from la to sd and back.
@cristianrosado3972 Жыл бұрын
What exact trick?
@RANDOMFIX Жыл бұрын
I showed in the video ( this is good for older vehicles before 2008 and have a complete playlist for incomplete catalyst monitors kzfaq.info/sun/PLDEbtVOPRC-h1BAzaWQ-6NSnmG0gwvgwP
@lenin188111 ай бұрын
@@RANDOMFIXMy 2010 Honda CRV car, of all its monitors, only 1 says incomplete, that is, not READY. ALL THE OTHERS ARE COMPLETE. READY. THE INCOMPLETE ONE IS 0S2. IT ALSO DOES NOT PRESENT A CODE AVAILABLE ONLY ON 02S NOT READY I CAN PASS IMPECTION LIKE THIS WITH ONLY 1 MONITORS NOT READY THANK YOU in New jersey
@fastfords907210 ай бұрын
I tried it on my 03 grand marquis doesn't work
@danielholtgrieve6623 Жыл бұрын
Man 1600 miles and tried every drive cycle out there. Randomly saw your video and tried in in front of the good will while my wife was shopping and it cleared!!! Thanks for this video!
@RANDOMFIX Жыл бұрын
Glad to help and 1600 miles a long time and lots of fuel. Thank you for the feedback
@weiye701 Жыл бұрын
Magic trick!! Thank you so much!! I was desperate to make CAT ready for my 2001 camry to pass smog check, as I have spent many hours of on highway driving and put more than 500 miles without luck. This trick fixes the issue in just 10 minutes!! One note is that the 3000 rpm needs to be kept running for 4 mins to make my CAT ready. The BEST advice on the internet. Thank you so much again!!!
@RANDOMFIX Жыл бұрын
Glad it helped! Yes the older your catalyst becomes the more time you may need to add to help it get ready.
@sambitar84482 жыл бұрын
BEST INSTRUCTION EVER, IT MEETS THE DATA NEEDED TO TRIGGER SYSTEMS TO COMPLETE MONITORS REQUIREMENTS. DID SMOG SINCE 1977/78. THANK YOU
@RANDOMFIX2 жыл бұрын
Sam, thanks buddy for the great feedback!!! That is a long career in smog, congrats to you.
@seanc56753 жыл бұрын
It worked! Three mechanics gave me the wrong advice. So... I watched this video, bought a $22 code reader, and then drove to a bank parking lot. I put the car in neutral and revved the engine to 3000-RPM and held it there for 3 minutes exactly. I shut the car off and did the odb2 scan again. Catalyst = READY! Went back to the smog center and passed! (2008 Mercedes E350 with 110k miles) -- THANK YOU~
@RANDOMFIX3 жыл бұрын
Sean, thanks buddy for the confirmation. Congratulations on getting your Benz e350 catalyst ready.
@periii86 Жыл бұрын
Thanks for sharing your story. Having a similar problem with my VW and will try it soon
@SkinnyTrails5 жыл бұрын
Thank you. Thank you. Thank you. After replacing knock sensors I drove 2000 4runner 1000+ miles, every weekend for 3 months getting up at 4am to drive so as to not attract attention with expired tag going slow on freeway following Toyotas drive cycle pattern. Got all, but catalyst monitor, then the 3 minute at 3K RPM finally did the trick. Thanks for taking the time to post this vid.
@RANDOMFIX5 жыл бұрын
Thank you for th great feedback and it is much appreciated that you took the time to let me know. _Randomfix
@melvinvillalobos30604 жыл бұрын
Thank you so much. After I drove 400 miles and wasted a full tank of gas without any results, I did exactly what your video said and it worked Just fine on my 01 camry thank you again.
@RANDOMFIX4 жыл бұрын
Melvin, thanks for the great feedback. _Randomfix
@Lex161Lexi3 жыл бұрын
oo hope is works on my 99 camry
@RANDOMFIX3 жыл бұрын
Good luck and let me know what happens.
@drue22834 жыл бұрын
It worked for my 2004 Toyota Highlander I/M readiness monitors were all checked off but catalytic still incomplete. After a Drive cycle was 150 miles in 2 days it seemed hopeless. So I started the engine to let it warm to normal temperature then reved it to 3000rpms for three mins. Let off the accelerator and scanned it again while idling. Cat monitor was READY Thanks for the video bro, it was really helpful 👍👍
@judahlion20672 жыл бұрын
Im that
@judahlion20672 жыл бұрын
Try that
@RANDOMFIX Жыл бұрын
I appreciate your constructive comments, thank you for the feedback!
@ronniendemann1834 Жыл бұрын
Wow! You are a lifesaver, it was a horrible long road to even find a reasonable used car & then it didn’t pass emissions here in WI. I did exactly what you did, step by step & I passed, can’t thank you enough for posting this!
@RANDOMFIX Жыл бұрын
Glad it helped!
@theprmstrful1 Жыл бұрын
I'm in Wisconsin too. Having the same issue with my car
@RANDOMFIX Жыл бұрын
Have you tried what I share in the video?
@theprmstrful1 Жыл бұрын
@@RANDOMFIX yep. 07 Hyundai Azera if that helps. Same issue with cat and evap
@RANDOMFIX Жыл бұрын
Here is the Hyundai drive cycle kzfaq.info/get/bejne/i-BzZ6l_udeylH0.html Keep me posted. What caused for your monitor data to get lost or deleted?
@DucatiPaso7502 жыл бұрын
This information was absolute GOLD for me!! I was finally able to get my 1997 Saturn SC2's catalyst ready in literally 3 minutes. In my case, I drove the car at 3,000 RPM in 4th gear (it's stick shift) on the freeway. I then checked the car with my scanner via the OBD2 and it was ready. Further, it passed smog in California!!
@RANDOMFIX2 жыл бұрын
David, thank you so much for the great feedback about it working on your 1997 Saturn SC2 ( cool car, best gm 4 cylinder in my opinion) Much appreciated
@arifarantos26733 жыл бұрын
Bro I was having so much trouble with my catalyst monitor and I saw this video today and an instant fix. Thank you so much🙏🏼
@RANDOMFIX3 жыл бұрын
Ari, thanks buddy for the great feedback. I'm glad I was able to help with your catalyst monitor. Much appreciated 🙏
@MrFindpb4 жыл бұрын
Thank you soooooo much, I was going crazy over the fact I had a bad cat, once I tried this, it worked! Mechanics nor the smog check guy knew this, thanks man!
@RANDOMFIX3 жыл бұрын
Glad it helped!
@drunkenmonkey_le56972 жыл бұрын
Wow! I can’t believe this worked for me. I have a Toyota Camry 2001 and done the drive cycles but still fails on the scanner. Gave it one last try this morning on a cold start, kept the car in parked, stepped on the gas and held it steady at 3000 rpm for a little over 3min. Rescanned the car and the cat and evap drive cycles were cleared. Thank youuuuuuuuu! Very helpful vid. You saved me from thinking of replacing the catylitic converter.
@RANDOMFIX2 жыл бұрын
Glad to help and congrats on getting that 2001 Toyota Camry ready to pass. Thank you for the feedback
@vincej92752 жыл бұрын
Randomfix today you just earned yourself a new subscriber. I own a 2001 Camry, changed a new catalytic converter and drove for 4,100 miles mostly on freeways and street. It was still not ready for smog test OBDII kept reading {Incomplete} Thank you so much because tomorrow I was planning to go back to the shop where they installed that catalytic to complain and get it changed/replaced. Thank you so much coz a total of 10 minutes only fixed my car and ready for smog test.
@RANDOMFIX2 жыл бұрын
Hi Vital, thank you so much for the great feedback and congrats on getting your 2001 Toyota Camry ready to pass!!
@lauraelena26984 ай бұрын
You seriously saved my life! I had to get an extension, drove over 300 miles and was failing multiple times. Did this once and it worked. I could cry. Sending you a little something on paypal as a thank you🙏
@RANDOMFIX4 ай бұрын
Hi Laura, Thank you so much for the great feedback and for your special present you sent. I really appreciate you and you taking the time to post your experience.
@chiefchimi3 ай бұрын
Nah this is legit the best video on KZfaq😂😂😂 actually worked and I drove 300 miles prior to this video , 100 miles per hour nearly. Once I woke up and saw this video I immediately went to go try it, comments are not lying, well me at least. Went to go for emissions in Atlanta and it worked real fast
@chiefchimi3 ай бұрын
Camry 2001
@RANDOMFIX3 ай бұрын
@chirfchimi thank you so much for the great feedback about the smog video. I am glad it was helpful and I enjoy sharing the little things I have learned from doing the hundreds of time at car dealership! Much appreciated
@weekdaywalker2 жыл бұрын
Thank you soooo much! This trick saved me from stressing out. It helped my 2000 Camry's catalyst to be ready for smog, while doing a few driving cycles could not get it ready. ❤❤❤
@RANDOMFIX Жыл бұрын
Glad to help and congrats on getting your 2000 Camry ready for smog.
@kymberlyherrera78143 жыл бұрын
My guy!!! Really was dreading doing the drive cycle for my 2002 Toyota Tundra v8 lmt. !! Plus where I live it’s always busy on the highway! So 1008 miles later , I found your video! TY! 3 mins at 3k rpm worked like a charm. Plugged in my OBD and BAM, CAT ready baby!
@RANDOMFIX3 жыл бұрын
Kymberly, thank you so much for your great and sharing your success on your 2002 Toyota tundra. Much appreciated ☺️
@jessica18730 Жыл бұрын
i am driving closed to500 miles tundra 2000 v8 i going to try this tomorrow !!
@kymberlyherrera7814 Жыл бұрын
@@jessica18730 do it! Hope it work for you as it did for me
@RANDOMFIX5 жыл бұрын
Look HERE, Vehicle Specific Drive Cycles for you vehicle is below........................ ▶️Complete Smog Playlist kzfaq.info/sun/PLDEbtVOPRC-h4WB90arPwdn_r7wr3kGki ▶️ 12 Minute Actual Drive kzfaq.info/get/bejne/oNKUh616m5rHloE.html ▶️ Demo EMISSION INSPECTION MONITOR Readiness (I/M) kzfaq.info/get/bejne/naeloMVq382wips.html ▶️ Acura Drive Cycle kzfaq.info/get/bejne/aMhnl7yosre-dKM.html ▶️ kzfaq.info/get/bejne/q7VpnKeWusCzqYE.html Audi Drive Cycle ▶️ BMW Drive Cycle kzfaq.info/get/bejne/o9Fmh85kmJalk6s.html ▶️ Chrysler Smog Readiness check kzfaq.info/get/bejne/hZeCe5CmlsiyeZc.html ▶️ Chrysler Smog procedure kzfaq.info/get/bejne/mt-JqZd51b-0qac.html ▶️ Ford Drive Cycle kzfaq.info/get/bejne/oJ6Kebd2lti3lnU.html ▶️ Gm Drive Cycle kzfaq.info/get/bejne/j9ZjZ86kr7-RloU.html ▶️ Honda Drive Cycle kzfaq.info/get/bejne/pcB1f9mLmcrFnnU.html ▶️ Honda Smog Readiness kzfaq.info/get/bejne/md6geMJ6lsmvmGw.html ▶️ Hyundai Drive Cycle kzfaq.info/get/bejne/i-BzZ6l_udeylH0.html ▶️ Infiniti Drive Cycle kzfaq.info/get/bejne/bZyDddyrzrSxdn0.html ▶️ Isuzu Drive Cycle kzfaq.info/get/bejne/ndKnY8do3pvDnIU.html ▶️ Jaguar Drive Cycle kzfaq.info/get/bejne/nsWRdsh7yM6ZY4k.html ▶️ Kia Drive Cycle kzfaq.info/get/bejne/hdqDd8d6zLeaj5s.html ▶️ Land Rover Drive Cycle kzfaq.info/get/bejne/d5NzoKWr0b7Xqo0.html ▶️ Mercedes Benz Drive Cycle kzfaq.info/get/bejne/nbKem6dlzLaUm4E.html ▶️ Mini Cooper Drive Cycle kzfaq.info/get/bejne/hKpga8KcsOCcfKc.html ▶️ Mitsubishi Drive Cycle kzfaq.info/get/bejne/ad-nmr2Il-CxkWw.html ▶️ Nissan Drive Cycle kzfaq.info/get/bejne/qZ-Af86AkqnOimw.html ▶️ Porsche Drive Cycle kzfaq.info/get/bejne/j89mmKR_2MnbmIU.html ▶️ Subaru Drive Cycle kzfaq.info/get/bejne/rZl0eZeYl86dZoE.html ▶️Volkswagen Drive Cycle kzfaq.info/get/bejne/q85odcuir9bed5s.html ▶️ Volvo Drive Cycle kzfaq.info/get/bejne/o6uViNp1ycXIo5c.html ▶️ Catalyst monitor not ready? kzfaq.info/get/bejne/ns9nhMedzLGsqoE.html ▶️ Catalyst Monitor Cheat kzfaq.info/get/bejne/eNuKjKSqxN7NYHk.html ▶️ Catalyst not ready? Watch this video kzfaq.info/get/bejne/e7iBiLiVvNWXXaM.html ▶️ Evap monitor not ready? kzfaq.info/get/bejne/b5-embeUtd-YlqM.html ▶️ EGR monitor not ready? kzfaq.info/get/bejne/l9uamsqZt8yUZH0.html ▶️ Oxygen sensor not ready? kzfaq.info/get/bejne/qaemq8hy3r_Xgp8.html ▶️ Oxygen sensor replacement kzfaq.info/get/bejne/b9B7qNil27TXZ2g.html ▶️ Oxygen sensor heater element testing kzfaq.info/get/bejne/sKuSi9Fn283VmXU.html ▶️Link to Scanner in video amzn.to/2BZYqWo ▶️▶️▶️Video about recommend Full Color Scanner kzfaq.info/get/bejne/p9Z4mLl4rcWapXU.html ▶️Link to this full-color scanner amzn.to/2z0YTcF ▶️Lucas Fuel Treatment amzn.to/38p7Ps6 ▶️Car Memory / Data Saver amzn.to/3mCTpKd ▶️Link to Scanner in video amzn.to/2BZYqWo ▶️▶️▶️Video about recommend Full Color Scanner kzfaq.info/get/bejne/p9Z4mLl4rcWapXU.html ▶️Link to this full-color scanner amzn.to/2z0YTcF
@marshalzarate602 жыл бұрын
Thank you soooo much... just fixed my problem. I'm worried about my catalyst thinking if I'm going to replace it coz I drove 200 miles and it's not yet ready, but thankfully it's solved my problem. Once again thank you so much..
@RANDOMFIX2 жыл бұрын
Anytime.
@TimMillerTale2 жыл бұрын
Thanks so much! I had to do it twice. But the second 3 minutes at 3000 rpms did the trick on the CAT monitor and I went and passed. Try it a couple of times! This was on a 2001 Toyota Camry. Thanks RANDOMFIX!
@RANDOMFIX2 жыл бұрын
Tim, thanks buddy for the great feedback and for taking the time to post this.
@riasinger17242 жыл бұрын
Same results same car! So happy 🙌🏽
@RANDOMFIX2 жыл бұрын
Glad to help
@periii86 Жыл бұрын
I drove my car days for the catalyst monitor to be ready but had no luck. Yesterday, I followed the instructions in this video for my 2005 VW Beetle (127K miles) and the incomplete code on OBD scan tool was moved to OK. Thank you RandomFix!
@RANDOMFIX Жыл бұрын
Glad to help with your Vw beetle. Thank you for the feedback and taking to time to post your success.
@sammm_4 ай бұрын
This worked on my 2014 Nissan Versa!!!! I did so many drive cycles and nothing was working at first. This worked on the first try. Thank you so much for this video!
@RANDOMFIX4 ай бұрын
Hi Sam, Glad to help, thank you for sharing your success on getting your 2014 Versa catalyst monitor ready. Please sub, like and if possible support the channel if the content helped you save time and money. As a smaller KZfaq Creator, my channel runs on the generosity of viewers like you. ☕️ ☕️☕️Buy Me A Coffee! bit.ly/Cofy4RF
@dotardtrumpanzee57043 жыл бұрын
Thank you very much. It worked for my 2001 Toyota Camry. I had to run the engine twice in order to trigger the catalytic mon from INC to OK.
@RANDOMFIX3 жыл бұрын
Thank you so much for the positive feedback and for sharing your success on your 2001 Toyota Camry catalyst monitor setting.
@briank75232 жыл бұрын
WORKED!! On my 2001 Camry with 189K. Tried all the drive cycles repeatedly, this is the only one that got the CAT ready. Surprised the heck out of me!
@RANDOMFIX2 жыл бұрын
Brian, good to hear the video helped on that 2001 Camry. Thx for the feedback.
@briank75232 жыл бұрын
@@RANDOMFIX Thank you for making this available!
@zenob48973 жыл бұрын
Thanks for the tip ! Doing this got my EGR ready, but the CAT stayed not-ready. I decided to go on the freeway and drove for about 3 minutes in 3rd gear with the RPM constantly at the 3000. My speed was on the average 62 mph doing this. This got the CAT in ready status !!! Did this to my son’s 2008 Mazda 3 which had the battery disconnected for weeks. So for those of you folks this tip did not work, try this variation. Again, THANK YOU.
@RANDOMFIX3 жыл бұрын
Arsenic, thank you so much for sharing your tips and I'm glad your found the video to be help. Much appreciated 🙏
@DucatiPaso7502 жыл бұрын
I'm going to try the same. Get on the freeway, but it in 3rd, hit 3000 RPM and switch on the cruise control. Hopefully it will work.
@RANDOMFIX2 жыл бұрын
David, let me know how it goes. Thanks
@josevilla725711 ай бұрын
Work 07 vw thx
@erniena25742 ай бұрын
Thank you so much!!! This worked for my 2000 Lexus rx300 on the second try. It has 220,000 miles on it. I had done several drive cycles which did not set the catalyst. I thought I might have to sell the car but who would want it when it won't pass emissions. It also was not worth replacing the three catalytic converters. This post made 5 years ago with 279K views. You are great. I am a lifetime mechanic (77 years old) and never knew this procedure. Thanks again. Ernie
@vonpeedler4 жыл бұрын
This is nuts! I first thought of this as an old wives tale. My cheap harbor freight monitor proved that it worked. Thank you for posting!
@RANDOMFIX4 жыл бұрын
My pleasure. _Randomfix
@iamvaitla2 жыл бұрын
Thank you so much . It worked perfectly on my 2000 Camry . Appreciate it a lot . You are genius 👈 Update : Smog test passed in next 15 min :) Thank you again . You have made my day .
@RANDOMFIX2 жыл бұрын
Glad it helped
@riasinger17242 жыл бұрын
Thank you SOO SOOOOO MUCH!! this worked on the second try for my 01 Toyota Camry!! 😩🙌🏽 I’m so happy this shit has been causing me so much stress! I took a 100 mile trip and it didn’t do anything, yet this 6 min fix worked like a charm. Much appreciation to you 👍🏽
@RANDOMFIX2 жыл бұрын
Ria, thank you so much for the great feedback and confirmation. Much appreciated
@green2life Жыл бұрын
I have been trying to get this monitor cleared for 3 weeks now. I have tried everything, all tips and tricks. Your method worked. 3 minutes of your method cleared the catalytic monitor. 98 Expedition 4x4, 5.4l v8.
@RANDOMFIX6 ай бұрын
I appreciate your feedback Sorry for the late reply
@derrickperrault831Ай бұрын
This worked the first time after trying the 200 miles and driving at 50-55 multiple times! Let's go!! You the man!!
@RANDOMFIXАй бұрын
I glad to hear that worked for you the first time!!! Just of out curiosity what was the year and make of the vehicle?
@TalkToMeGoose5503 жыл бұрын
You're a damn genius. This 100% worked for my 2005 Scion TC. Thank you!
@RANDOMFIX3 жыл бұрын
Thank you so much for the great feedback. I've been called many things but genius I really like. Lol, seriously I'm glad the video helpful and it helped avoid driving around town for no reason that to set a smog monitor. Have a great day.
@sohackitj4 жыл бұрын
Thanks for the video, here's my story. I have a 1999 Mazda B2500, and had gotten my renewal notice 2 months prior. Hadn't gotten it smogged yet, and early on the morning of the 5th of July it was stolen off the street in front of my house. Didn't think I'd see it again, but it was recovered almost a month later. They broke the clockspring when they busted the ignition, so I had to order and wait for the new one. I had to disconnect the negative cable to do the installation, there by making the drive cycles necessary. They had stolen my plates as well, and didn't want to be driving 300 miles in SoCal freeways without plates. Less than 2 weeks left to get renewal done. I took it on a local 2 lane road for about 10 miles. That left only the evap and cat to finish. I tried the method in this video but cat still didn't finish, so I took it out on the same local road and drove it in 4th gear (it's a manual) at around 50 mph keeping an engine RPM of 3500. The cat cleared in about four minutes. Just passed smog this morning.
@RANDOMFIX4 жыл бұрын
Tim, glad to hear you passed and you got truck back. Thank you for sharing.
@adeilsonvieira73312 жыл бұрын
I tried a few times like the video, with car parking 3.000 rpm for 3 minutes, but didn’t worked! So read a few comments and I tried like they said! First I drove the car around the parking lot for 4 minutes at 3.000 rpm and my oxygen sensor turn OK on scanner, but the catalyst still INC and a tried again and nothing happened. So I drove in a high way for 7 minutes 55 mph and 3.000 rpm, when I stoped the car catalyst was ready!! This work on my Mini Cooper convertible 2008!! Thank you so much for help us!
@RANDOMFIX Жыл бұрын
Glad to help with your mini cooper, thank you for the great feedback!
@tommagbalon72252 жыл бұрын
Thank you very much, my car just passed the inspection...more power to you and your family...
@RANDOMFIX2 жыл бұрын
Tom thank you for your great feedback and for taking the time to post this great feedback. Much appreciated.
@seekupr4 жыл бұрын
I can not thank you enough for this tip. After paying for a new catalytic - wouldn't register in the car - drove 400 miles 2 tanks of gas, still one last warning wouldnt clear. Tried this thi am, yes with a cold start, and drove it straight to smog, boom, it passed. Ty ty ty, i was about to drive the dam car into a wall and call it a day😂
@RANDOMFIX4 жыл бұрын
Rachel, that's awesome nes, Glad to help.
@ciscokaliking84693 жыл бұрын
It’s gonna happen once or twice more in our lifetime. God willing more. So don’t forget. Dear comment readers. Hint hint.
@xxxjayxxx113 жыл бұрын
Same here. Thank you so much bro Keep this type of videos rolling....
@chuey7992 жыл бұрын
Thank you bro you're a lifesaver, tried this on my 2000 toyota camry one day before my tags were due and it worked, had to do it twice for it to work but it sure beats driving around trying to get it to clear, thanks again just subscribed
@RANDOMFIX2 жыл бұрын
Jay, thanks buddy for the confirmation. Much appreciated
@HardcoreUly2 жыл бұрын
When you say you did it twice did you let the car cool down overnight before the 2nd attempt? Or did u simply let the vehicle idle for a minute after the 1st attempt before repeating the 3min part where u rev it at 3000 rpm?
@chuey7992 жыл бұрын
@@HardcoreUly after the 1st attempt i just turned the car off completely for a couple of seconds and then did the process again and after the 2nd attempt i turned the car off again and then checked it with the obd2 scanner and it was cleared
@marcosman33937 ай бұрын
How you test twice do have to wait till next day mine won't clear need help
@shulkisreallyfeelingit2251 Жыл бұрын
Just did this with my 2005 Nissan Altima, after it not being ready for the longest and overdue at that THIS WAS A GOD SEND THANK YOU!
@RANDOMFIX Жыл бұрын
Glad to help with your 2005 Altima. Thank you for great feedback
@vcastel6689 Жыл бұрын
RANDOMFIX, Thank you so much for this amazing video? This really worked on my 2003 Toyota 4runner. I was failing the Catalyst Mon, the mechanic kept insisting the catalyst had to be replaced. You have saved me head aches and lots of money....
@RANDOMFIX Жыл бұрын
Glad to help and congrats on saving that $$$ on the 4Runner Thanks for the great feedback
@myphone7954 жыл бұрын
Thank you... you saved me a ton of money, i appreciate you taking time and help us out, i just passed my smog inspection after months of frustrations.
@RANDOMFIX4 жыл бұрын
Shawn, thanks buddy for the great feedback. Randomfix
@jt.6332 жыл бұрын
Notes: 1. Make sure to do this in a well ventilated area, definitely not in an enclosed garage. 2. Start vehicle from cold and let idle for 7 mins (keep an eye on the temperature). 3. Press foot pedal until 3,000 rpm and let idle for 3 mins. Update one year later: I couldn’t clear the catalyst after trying everything and wasting so much gas. I just gave up and after 6 months of driving occasionally (wfh), I got it checked again and the cat was cleared. I had felt it wasn’t gonna happen so maybe try that if you are stuck. I paid the renewal fee but was driving around with an expired sticker luckily nothing happened to me 😂
@drk_89842 жыл бұрын
Weird thing is for me it’s off and on it’ll go from ok to inc idk what to do
@jt.6332 жыл бұрын
@@drk_8984 I’ve seen other people say when they see that it is OK they drive straight to smog check without ever shutting off the car.
@drk_89842 жыл бұрын
@@jt.633 That’s smart I’m going to have to do that thanks
@AlexOsbaldo Жыл бұрын
@@drk_8984 you have a problem with your stay alive memory
@samuelriebel5535 Жыл бұрын
After the catalyst fault clears, can you turn off the engine or do you need to keep it running all the way through the smog test?
@beatgod9582 Жыл бұрын
🎉🎉🎉 I have just spent a half a tank of gas in two days driving around with nothing working and I finally stumbled upon this video and even though I felt skeptical I tried it anyways. Sure enough I came back to the smog center and it fucking worked!! thank you so much for posting this video anyone who’s read this comment it absolutely works!!
@RANDOMFIX Жыл бұрын
Glad to help and thank you for sharing your success. Ouch 1/2 tank of gas wasted.
@bedrock85 ай бұрын
I had a number of issues this year to get my 2001 Camry smogged. After some repairs to old hosts, cleaning EGR valve, etc, everything checked out except the catalytic drive cycle. Went back to the smog shop numerous times after 300-500 miles and kept being told "you need to drive it some more". Finally, the smog technician told me to look up Toyota's drive cycle to see what I may be missing. Ran that twice late in the evening hoping not to tick off any freeway drivers wondering why I was only doing 55mph and trying to maintain 35-45 on the trip back on a smaller road for both cycles. NONE OF IT WORKED. Came home, started looking and saw this video and after letting the car sit overnight, starting her up and letting her warm up, 3 mins at 3k rpm and the monitor went from INC to OK. THANK YOU for this tidbit of into! Now to get the car smogged!
@RANDOMFIX5 ай бұрын
I’m glad to help with your 2001 Camaro smog and thank your sharing your success. Just know that passing your Camaro in the future will get harder to set this cat monitor as it ages. Make sure you have a memory saver kzfaq.info/get/bejne/jdyDfKSCmLHUhas.htmlsi=vaOrn21lHwKlZUn4 I have others say that they went 3k for 4 minutes when the weather was colder or very high mileage. Have a great Sunday
@bedrock85 ай бұрын
@@RANDOMFIX LOL, I wish I had a Camaro! Unfortunately, it's just another pedestrian Toyota Camry sedan I bought from new and racked up 286k miles on it!
@RANDOMFIX5 ай бұрын
@bedrock8 no shame in a Camry. Sorry my auto correct got Camaro by accident. The Camry is solid especially the 2007 to 2011 4 cylinder models. I think these were are the best sedans ever built. I sold my 2019 and regret it now. The new Camrys are not as wide even though they appear to because the lower base but the top toes in.
@josefer23325 жыл бұрын
Thanks ! I been trying for weeks to fix the issue with my cat not being ready and this did it ! Thank you Thank you !
@RANDOMFIX5 жыл бұрын
Jose thank you for taking the time to post this great feedback and I really appreciate it. I wish you all the best. _Randomfix
@ShaCurington3 жыл бұрын
Just tried this for my 2005 suk forenz that wouldn't pass smog. It passed after doing this. Thank you!!! :)
@RANDOMFIX3 жыл бұрын
Thank you so much for the feedback
@Wawas31811 ай бұрын
Randomfix your awesome I have a 2015 Honda crv , sensor one was replaced , it failed inspection because it was not ready, I tried all to make it ready nothing worked, ONLY YOUR INSTRUCTIONS WORKED TO MAKE IT READY. Thank you so much
@RANDOMFIX11 ай бұрын
Glad to help with your Crv smog Thank you for posting your experience and success
@williampaxton8713 ай бұрын
Dude you did it for me! My 2012 Fit failed smog for exactly this reason. I did the who drive cycle deal and nothing. Then I did yours and it worked. Many thanks for posting this video. Bill in Los Angeles
@RANDOMFIX3 ай бұрын
William, Glad to help you and I know getting the monitor ready for smog can be a real pain especially in Los Angeles and with heavy traffic. Thanks for the great feedback
@oseanillu2057Ай бұрын
Hey I also have a fit that’s failing emissions because of this reason, but for some reason my Honda fit automatically drops RPM’s after holding the throttle longer than 2 minutes when I’m in park. Did you experience the same thing?
@nasserasi88292 жыл бұрын
Thank you so, so much! I've been struggling with getting the CAT monitor ready. I've driven 524 miles, but it still would not complete. After following your instructions, it became ready, but this was after a second attempt. I was planning on driving several more hundred miles before seeing your video. It was so pleasing and rewarding to see that the CATALYST monitor turn from red to green on the scanner, just having it idle at 3000 rpm's for 3 minutes, after the engine warmed up, without driving an inch!!! By the way, the car is a 2000 Lexus ES300, with over 198,000 miles. Again, thank you so much for the video. God bless.
@RANDOMFIX2 жыл бұрын
That Lexus es300 is one of the hardest vehicle to get the catalyst ready on. Thank you for your support and feedback.
@rkgsd2 жыл бұрын
@@RANDOMFIX Lots of old Toyotas with the same engine.
@HyttmanTjsmma2 жыл бұрын
Did this on 2000 ukon it did nothing
@masonfalcon69332 жыл бұрын
@@RANDOMFIX sure is. I have an 02 lexus es300 and I'm having that problem for the evap and catalyst. I'm going to try your method
@kennylee99595 жыл бұрын
I tried this way today. Working Perfectly! Thanks you so much.
@wingchunwong2 ай бұрын
Thanks sir I just got my 2004 toy rav4 cat code clear using your method 😂👍👍👍👍
@Seagull7809 ай бұрын
Seeing as I'm currently not allowed to drive my car due to failing a test that includes an emissions test, I'm very thankful you posted this.
@RANDOMFIX9 ай бұрын
I’m glad to help and please let me know if you have any questions. I will be happy to point you in the right direction
@LindaCharles-ll6lm3 ай бұрын
Did this work for you ?
@bdub034 жыл бұрын
00 Odyssey with 266k. Ran the same test holding at 3k rpm in park for 4 minutes. Readiness did not pass! Then got on the freeway and held it steady at 55mph for 3 minutes (no AC, no cruise control) and passed immediately. Just a heads up for Honda owners.
@RANDOMFIX3 жыл бұрын
Just made a video for honda owners, thanks for the as well. kzfaq.info/get/bejne/pcB1f9mLmcrFnnU.html
@calorcito42092 жыл бұрын
Thank you so much!! I had all my I/M ready but i was having problems with the catalyst, i did this while my car was already hot and it worked perfectly.
@RANDOMFIX2 жыл бұрын
Glad to hear that video helped get your catalyst ready. Thank you so much for taking the time to post this confirmation.
@Frankenstein6.25 ай бұрын
WORKED!!!!! Finally passed inspection in close to 2 years!!!!! Thank you!!!🙏🏼
@RANDOMFIX5 ай бұрын
I’m glad to hear that. Wow 2 years is along time. What make model of vehicle is it and what was the issue?
@Frankenstein6.25 ай бұрын
2001 Tacoma PreRunner 2.7 2WD. P0420 code was on, cleaned cats and replaced both O2 sensors, cleared the codes and drove around before inspection. Catalyst Monitor kept coming back not ready after HUNDREDS of miles of driving around and doing the stupid "driving cycles" on youtube. Couldn't pass the state inspection until I found your video!@@RANDOMFIX
@ThanhNguyen-fh1fjАй бұрын
Just wanted to say thanks. Although these exact steps didn’t work for me on a 2003 Toyota Camry, but I knew where you were going with this. On the Toyota Camry, there is a button on the transmission stalk to turn on/off the “Over-Drive” system. Once I turn that OFF and drove it on the freeway, the Catalytic Monitor went to Ready. Basically, I needed to get to a higher RPM (above 3k) on the freeway for an extended period of time and that monitor will clear. When the over-drive is ON, it would always hover around 2k, this doesn’t make the catalytic converter hot enough and so the computer will never say it is ready. So if you have a vehicle with this type of over-drive transmission, turn it off and go for a freeway drive and in 10 minutes of freeway driving it will clear. I guess if I had to do it again I could have done this same procedure longer and it might work, so instead of 3 minute just let it rev up to 3k RPM for longer.
@RANDOMFIXАй бұрын
You hit the nail on the head. You have to get catalytic converters hot and when you turned off the overdrive you made the engine work harder and it produced more heat. I didn’t recommend turning off the overdrive as 3k rpm on certain vehicles like Chevrolets, bigger v6 and v8 motors will be destroyed as those motors lose oil pressure. Thank you again for sharing.
@kd30602 жыл бұрын
I tried your technique and I had no change to the code clearing. The next day I checked and it was cleared. Thank You!
@RANDOMFIX Жыл бұрын
Glad to help and thank you for taking the time to post your experience of setting your catalyst monitor
@AJL_904 жыл бұрын
This worked for my ‘01 Tacoma. Thank you!
@RANDOMFIX4 жыл бұрын
Great to hear! and I appreciate the feedback.
@peterlunch46972 жыл бұрын
New cat installed 06 solstice. This didn’t do it for the catalyst monitor, so I decided to drive at lower gear at around 40 mph and RPM’s at 3000 or a little higher for about 10 miles. Tested and all ready to go. Thanks
@RANDOMFIX2 жыл бұрын
Thank you sharing your story on your Pontiac Solstice
@stevesaenz29262 жыл бұрын
Random fix you have earned my subscription I will be subscribing tonight my catalyst was not setting or not ready I tried the driving technique that you had mentioned that didn't set it last one was trying the bottle of the catalyst cleaner or whatever that is the bottle you recommended best $27.99 I've spent saves me $300 plus bill of having to buy a new cat I appreciate it very much like I said I'll be subscribing tonight thank you!!!!!
@RANDOMFIX2 жыл бұрын
Hi Steve, thank you so much for the great feedback and I'm had you are doing the channel here. Much appreciated. Congrats on getting your catalyst monitor ready.
@imnotstupidjustslow93663 жыл бұрын
I can I leave the OBD scanner connected while doing this procedure or do I need to disconnect it. Edit: I left the OBD Scanner connected while driving and it worked. Also what finally got me to pass the "Catalyst Not Ready" was to do the driving where you go about 65-70 mph then let the car slow down on it's own without touching the pedal.
@RANDOMFIX Жыл бұрын
I appreciate your constructive comments, thank you for the feedback!
@roycejohnson81894 жыл бұрын
Bro. You didn't think to show us the CAT ready on the scanner afterward?
@solidpnoy4 жыл бұрын
Royce Johnson because it obviously did not work! Waste of time!
@Joelo77343 жыл бұрын
It worked for me
@RANDOMFIX3 жыл бұрын
Thank you for the confirmation 👍 🙏
@luckyvids3 ай бұрын
@@solidpnoy Why did you said that,@solidpnoy? Did you try it?
@RANDOMFIX3 ай бұрын
@luckyvids read the comments it works great for older vehicles especially Toyota vehicles. Don’t believe the brave boys behind their keyboard. It cost nothing and is to try for yourself
@omarparish67484 ай бұрын
THANK YOU SIR!!! YOUR TECHNIQUE WORKED FOR MY TRUCK. I WAS ABIT SKEPTICAL AT 1ST, BUT WITH SOME PATIENTS IT WORKED!!
@RANDOMFIX4 ай бұрын
Glad to hear what sort of pickup did you have and how many miles?
@omarparish67484 ай бұрын
It's a 2007 i290 isuzu pickup with over 300k miles. I did the sea foam solution for catalytic converter where the 02 sensor is placed and it help alot..Thank you again..sir!
@EddieSoum2 жыл бұрын
I can confirm this work with 2007 Nissam Altima. Here's what I did. Went to an empty parking lot . Turn on the Car, set it on park let the car warm up til the needle thing reaches in the middle between hot and cold. I turn everything on AC on full blast for 10 minutes. After ten minutes, I rev the car to 3000 rpm for about 3 minutes mine took only 2 minutes, you will know if you completed drive cycle if your car stutter. I did this twice to make sure that it was working. My Oxygen Sensor Monitor went from INC to Ready.
@RANDOMFIX2 жыл бұрын
Hi Eddie, thank you so much for the confirmation on the a 2097 Altima package
@ali-bisingerhymer95435 жыл бұрын
EXACTLY What I need for old camry
@johncandy72373 жыл бұрын
Did it work?? I have a 2001 Camry and the catalytic still shows incomplete 🤦🏽♂️
@RANDOMFIX3 жыл бұрын
Yes, this is for older cars such as your 2001 Camry.
@user-is5to3jq3j3 жыл бұрын
Thanks im doing this now
@RANDOMFIX3 жыл бұрын
Glad to help and I'm here if you need anything else.
@hectorcoronel6193 жыл бұрын
Nope, didn't work. Driven over 1,000 miles on 97 accord 4cly ,every monitor is good except catalytic monitor.
@bigthreewheeler Жыл бұрын
I have a 2000 Yukon. This worked for me. What I did, was drive the truck in 2nd gear (number 2 on the dash) at 45 mph. This gear and speed was perfect for achieving a consistent 3000 rpm. I have a Bluetooth ODBII connected to my phone, so I literally watched the Catalyst Monitor go into 'ready' state as I was driving. It was around 10 mins of in town driving, which I had several stops in between. The reason why I drove until of doing it in my driveway is because my exhaust is fairly loud and I didn't want to disturb my neighbors. I just made a trip to get lunch a productive one, and it worked!
@RANDOMFIX Жыл бұрын
Thank you so much for the great feedback and congrats on setting the Cat monitor on your 2000 Yukon! is the catalyst original?
@bigthreewheeler Жыл бұрын
@@RANDOMFIX you're very welcome and thank you for your information! Yes, I have the original cats on my Yukon.
@zerocal76 Жыл бұрын
Hi bigthreewheeler. Could you please tell me what BT OBDII app you used? I haven't been able to find one that monitors the stuff needed for smog checks. Thanks in advance friend!
@r8dazz Жыл бұрын
Man!!! I was skeptical. I kept trying to smog my 2002 toyota 4 runner. It didn't pass . They said wasn't ready. I came across this video and this shit really worked for me. Got a smog pass right after following the video. Thank you!!!!!
@RANDOMFIX Жыл бұрын
Glad to help with your 2002 4Runner. Thank you for the feedback
@trickdaddy7148 Жыл бұрын
This video is a time/money saver ! It worked on my 2003 Toyota Highlander V6 with over 331k miles after multiple tries. Thank you !
@RANDOMFIX Жыл бұрын
Glad to help get that Highlander ready for smog. 331k miles, you gotta love toyota. Are the cats original?
@trickdaddy7148 Жыл бұрын
@@RANDOMFIX yup
@paulmcfarlin5646 Жыл бұрын
It worked for my 05 cadi sts but the 02 sensors will not get ready after 5 drive cycles and 400 miles.
@NuclearBalls12 жыл бұрын
I was in the business for 20 years, but I've never heard of this trick. I can tell you how it probably works. At the air filter, your vehicle is sucking in 78% Nitrogen, 21% Oxygen, and about 1% "other" like Carbon Dioxide, (Al Gore's favorite gas,) Helium etc. The ideal exhaust ends up as 78% Nitrogen, 16% Carbon Dioxide, 5% Water Vapor, 1% "other," and NO pollutants - HC, CO or NOX. One common misconception is the idea that if your exhaust has low pollutants, then everything is fine. The CAT monitor is not based on pollutants coming out the pipe, it's based on how well the CAT stores, and uses Oxygen, in the catalyzation process. This process is cyclic in nature, similar to the way an Oxygen sensor sends high / low signals to the ECM. First the CAT stores Oxygen, then releases it as needed, then stores and releases again. So the ECM monitor is looking for NO Oxygen at the rear, after the CAT, Oxygen sensor. This lack of Oxygen tells the ECM that the CAT is storing and using the Oxygen properly, and the monitor is completed. With this in mind, what probably happens when you raise the engine to a stationary high RPM, versus driving on the road, is you are putting your GOOD RUNNING engine in a state with a minimum of unused Oxygen in the exhaust. Any exhaust pipe leaks, before, but especially after the CAT, and before the rear Oxygen sensor, will doom the CAT monitor. An exhaust leak after the rear Oxygen sensor, will not affect this CAT monitor. Raising the RPM increases the exhaust pressure, which makes it more difficult for ambient Oxygen to leak into the exhaust pipe. So this added pressure, which masks the problem of exhaust pipe leaks, is a major key in this trick, in my opinion. This no load, high RPM condition, probably creates the lowest exhaust Oxygen possible, at the rear Oxygen sensor.
@angelgirowall86732 жыл бұрын
Thank you so much for this great explanation.
@NuclearBalls12 жыл бұрын
@@angelgirowall8673 My pleasure!
@ryno20622 жыл бұрын
Most understandable and clear explanation of the CAT I've ever read. Thanks for that. And I'm sure anyone that stumbles on to your post will appreciate your explanation as well.
@RANDOMFIX Жыл бұрын
Sorry for the late reply! did you find a solution?
@tomweiss44194 жыл бұрын
Worked for me after replaced cat drove more than a month wouldn't clear, today drove in a lower gear held rpms at appox 3000 for 3 or 4 min finally cleared. Thanks
@RANDOMFIX4 жыл бұрын
My pleasure and I'm glad to help.
@khoazyxo5 ай бұрын
Yo, came back to this video to say you’re a life saver, I was able to get all my monitors to read besides catalyst, even drove the vehicle for 3 minutes around town keeping rpm’s at 3k and it didn’t work, I figured I’d just pull over and try what you said cuz why not what do I have to lose? And guess what? It worked 😂 on my 17 370z
@RANDOMFIX5 ай бұрын
Thank you for the great feedback and your success with your 2017 370z. It worked on the side of road because your vehicles catalyst was warm already. I appreciate you posting this your experience.
@evokiid4 жыл бұрын
It worked after driving around for so long and no results tried this and it worked! On a 08 Civic Si
@RANDOMFIX4 жыл бұрын
Great, thank you for the feedback.
@musicmansdream3 жыл бұрын
2004 expedition no go...
@moe22284 жыл бұрын
Thank you. I drove 150 miles yesterday and nothing. I tried this today and passed real quick. It worked on a 05 nissan Sentra.
@RANDOMFIX4 жыл бұрын
Moe, my pleasure. _Randomfix
@sik91lx4 жыл бұрын
Does not work for 2002 Sienna. Warmed up on a cold start let it idle for 12 minutes. Let it sit at 3k rpms for 3 mins. Nothing
@RANDOMFIX Жыл бұрын
I appreciate your constructive comments, thank you for the feedback!
@wyattsdad85613 жыл бұрын
My catalys monitor would not come up and say okay after having work done on my truck because they disconnected the battery. I had been driving my truck with a bad misfire for several months because I couldn’t afford the replacement of the intake manifold. After finally getting it replaced I drove the truck for over a week and no luck with the catalys monitor. Then tonight I used a product called Cataclean. I Followed the directions and low and behold the cat monitor says ok! Omg I’m so relieved. I did try revving the engine to 3000 rpm three days ago after initially watching this video but it didn’t work for me. Anyway.. I just wanted to mention using the Cataclean in case anyone needs another method to try. Thank you for sharing your vid I’m sure you’ve helped many people.
@RANDOMFIX3 жыл бұрын
Awesome thanks for sharing, I have 2 videos about cataclean. In the future as your catalyst ages even more, cataclean will even become useless for you so when that happens check out my video on how to buy direct connect catalysts for about the price of 5 bottles of cataclean. Thanks for sharing.
@wyattsdad85613 жыл бұрын
@@RANDOMFIX okay I definitely will. Any chance you could post that link on here for me? You’re probably right, I’m sure my cats will need to be replaced at some point. I never got a code for them, just a slow monitor. But I drove for several months with a bad misfire and sometimes two cylinders were missing due to water getting in the plug wells. I’d remove the coils and clean them out from time to time but my check engine light would flash sometimes. So they’re probably not in great shape. Again thank you for making the vid and sharing.
@RANDOMFIX3 жыл бұрын
Here is the link kzfaq.info/get/bejne/jdhhqamiqNTUdJc.html and all smog related videos are in the Smogs tips playlist.
@ethanhallums26933 жыл бұрын
Hell yeah. I’ll try this today after work!
@RANDOMFIX3 жыл бұрын
Let me know what happens and if you need anything please let know what you are driving and any specifics about the vehicle that you feel are important. Thanks and good luck.
@anthonyvargas48573 жыл бұрын
AWESOME THANKS FOR THE TIP . IT WORKED JUST LIKE YOU SAID ‼️ ONE HAPPY CAMPER OVER HERE. YOUR THE MAN👨🔧🧰
@RANDOMFIX3 жыл бұрын
Anthony, I'm glad the video was helpful.
@davidl431510 ай бұрын
UPDATE !!!!!!!! THANK'S TO ONE OF THE COMMENT BELOW MY CAR PASS CATALITIC READY BUT I RUN THE CAR AT 3000 RPM FOR 4 MINUTES AND BOOM READY !!!!!!!!!!!!!!!!!!!!!
@RANDOMFIX10 ай бұрын
CONGRATS AND THANKS FOR SHARING YOUR SUCCESS. What are your driving and how many miles?
@davidl43153 ай бұрын
@@RANDOMFIX Camry 2001
@musiclover8562 жыл бұрын
Worked like a charm....2001 Camry 4cyl with 232,000 miles.....runs like new
@RANDOMFIX2 жыл бұрын
Johnny, thank buddy for the confirmation and congrats on getting that 2001 Camry ready to pass.
@shaydyluke2 жыл бұрын
Idk if this did the trick but I own a 2002 Toyota 4Runner. I drove for 45 miles nothing. Pulled into a parking lot didn’t do it for 3 minutes did it for 2…. Drive down the street to my house 3-4 minutes CAT was ready 👀🔥👍🏿. So thanks!
@RANDOMFIX Жыл бұрын
Glad to help and yes for older toyotas this is the trick!!!
@laingo84964 жыл бұрын
I did 2 tries for my 04 Sienna - didn't work, thanks for your video.
@l310074 жыл бұрын
Thank you for sharing your experience with us. It's good to know.
@RANDOMFIX3 жыл бұрын
Hi, Peter, every car is different and these 2004 sienna and 4runners are a pain in butt. Try it for yourself and I'm here to help.
@RANDOMFIX3 жыл бұрын
Good to hear the news and thank you for sharing.
@adrianlastname48645 жыл бұрын
What's an "older vehicle"
@RANDOMFIX5 жыл бұрын
Hi Adrian, Great question. 1975 to 1995 will be emission probe test. as where 1996 to 1999 will b emission probe test and obd2 readiness tested. Vehicles 2000 and newer will only be obd2 readiness test.
@tino52809 ай бұрын
thank you, it worked. you have saved me a lot of headache, money and time.
@RANDOMFIX9 ай бұрын
My pleasure to help, thank you for sharing your results
@justine5804 Жыл бұрын
I have 2000 Sienna with 150k miles I jumped my battery 2 weeks ago so didn't pass the the smog due to No Data. So I did drive cycle for 150 miles and got everything ready except for catalyst monitor So here is what I did : Cold start overnight Idle for 15 minutes Revved 3,000 rpm for 3 minutes (It would jump after 2 minutes but kept going) Drove about 2 miles (to Advanced auto parts to pick up the DTC (OBD2) scanner without turning off the engine) Connected scanner and drove to freeway At speed of 50 mph for 3~5 minutes then drove 45 mph for 2 minutes then the CATALYST monitor changed to Ready status. So I took it to smog station and passed in couple days after.
@RANDOMFIX Жыл бұрын
That’s awesome, thanks for sharing your success on getting your 2000 sienna catalyst monitor ready.
@l310074 жыл бұрын
Should you keep your scanner attached so you can keep an eye on it in case it works before 3 minutes? So that maybe you don't have to run it the whole 3 minutes?
@RANDOMFIX Жыл бұрын
Sorry for the late reply! did you find a solution?
@l31007 Жыл бұрын
@@RANDOMFIX I ran the car twice for 3 minutes each time. It didn't work. What I found out that for many cars, the computer is looking for what's called a Drive Cycle. Each car has a different routine its looking for, like drive at 30MPH for 30 min, do certain full stop exercises, idle for 5 min. Each car has different drive cycles. The computer is basically seeing that you are driving your car regularly. My mechanic told me to drive my car on the freeway for 100 miles. That didn't work and was a waste of gas and time.
@RANDOMFIX Жыл бұрын
So how did you pass? What are you driving? What are you driving?
@susanlambert34134 жыл бұрын
I’ve did it twice and nothing 😔
@RANDOMFIX4 жыл бұрын
Did you try a 3rd time?
@DD-yi2dh2 жыл бұрын
Thank you! I tried your advise and it worked. Thank you!
@RANDOMFIX2 жыл бұрын
Glad to help, thank you for the feedback
@Chris-yc1wy3 жыл бұрын
My 2000 camry wouldn't complete the cat test, no precheck engine codes, Drove over 300 miles tried 2 different drive cycles i saw online and nothing. Scanned before I tried this method to make sure it was still inc And it was and this method actually worked. I don't think this method works every time but It sure worked this time. Thanks mane
@RANDOMFIX3 жыл бұрын
Ronin, thank you for the feedback and congratulations on setting the inspection monitors for your 2000 Toyota Camry. This drive cycle does not work for some vehicle so I made a vehicle specific video for each make. 2 months of work my hope is that every can benefit from those videos. They can be found on the smog tips playlist.
@shred93959 ай бұрын
Worked for my 2004 Celica GT thank you!
@RANDOMFIX9 ай бұрын
Glad to help, yeah this works great for pre 2008 Toyota really well.
@edwardabrantes89633 жыл бұрын
Thanks for good advice , got a 2007 Nissan xterra done 211,000 miles on the clock my car runs good and due for a inspection .
@RANDOMFIX3 жыл бұрын
Edward, thank you for the great feedback 😀
@josebedolla3742 Жыл бұрын
Right on this video helped me out boss.didn’t even had to run excessive miles to be ready to pass smog
@RANDOMFIX Жыл бұрын
Jose, thanks buddy for the great feedback about the smog video. What are you driving?
@josebedolla3742 Жыл бұрын
@@RANDOMFIX I currently have a 2000 Toyota Camry se 4cly.
@RANDOMFIX Жыл бұрын
Awesome cars and simple to work on. Thanks for sharing buddy.
@manuelgutierrez38553 ай бұрын
Thank you so much for the info..did this to my 2001 thundra after a week of driving and not able to clear the cat test.. 3 min did the job thnks again
@RANDOMFIX3 ай бұрын
Glad it helped with your 2001 tundra and thank you for taking the time to post your experience
@LindaCharles-ll6lm3 ай бұрын
Did u only have to do it once ?
@manuelgutierrez38553 ай бұрын
@@LindaCharles-ll6lm I did it twice first try didn't work second did
@klutch...2 жыл бұрын
I just passed emissions. Did this more than 6 times. It didn't work. After trying this, what I did was drive on the highway at a constant speed at 55MPH for 7 minutes. Don't use the brakes. Let the car coast to a stop on its own. My catalyst monitor started working. Went right to the inspection place and passed. Wish I saw this sooner since I got 2 tickets since my inspection expired 4 days ago. Oh well. I can sleep better now 😁
@RANDOMFIX2 жыл бұрын
Good to hear and thank you for the update.
@klutch...2 жыл бұрын
@@RANDOMFIX Keep up the good work. Thanks again👍
@RANDOMFIX2 жыл бұрын
Thank you ❤️
@mansonboy20002 жыл бұрын
This worked for my 2004 honda accord. Thanks!
@RANDOMFIX2 жыл бұрын
Great to hear! thank you so much for the great feedback. As a smaller KZfaq Creator, my channel runs on the generosity of viewers like you. ☕️ ☕️☕️Buy Me A Coffee! www.buymeacoffee.com/RandomFix
@bennyn16483 жыл бұрын
Thanks Random fix. Just what I needed. I’ll try and do that today and I’ll get back with you. Thanks 🤙
@RANDOMFIX3 жыл бұрын
Sure, Benny if you still need help just let me know what's the make of your 1996+ vehicle so I can send the exact directions for your vehicle or check the smog tips playlist and find your make. Good luck.
@whozig94655 ай бұрын
BROO YOU SAVED MY LIFE! I TRIED THIS AND IT TURNED ON MY CAT MONITOR. PLS PLS PLS GUYS DO YOUR DRIVE CYCLES!!! I did mines for the first time after driving 500+ miles and nothing seemed to work until I did that drive cycle. Only took about 8min.
@RANDOMFIX5 ай бұрын
I’m glad to help, anytime! Thank you so much for gracious feedback and for making evening!!!
@m6dada6112 ай бұрын
This definitely works
@Joelo77343 жыл бұрын
Did it today for my 2000 Nissan frontier all monitors passed/ok except for catalytic converter said “Inc” (incomplete) held throttle at 3000 rpm for 3 minutes and 30 seconds gave it a quick rev and then turned off truck for 10 seconds turned it back on held rpm at 3,000 rpm for another 3 minutes and 30 seconds, gave it another quick rev checked monitors and they were complete thank you so much saved me lots of gas money and allowed me to keep my favorite truck with the 3 minute 3,000 rpm trick never in a million years did I think this was a fix / procedure for setting catalyst monitor I drove 500 miles attempting to set catalyst and ended up setting them in my driveway (-:
@RANDOMFIX3 жыл бұрын
Thank you so much for sharing your success on your truck. I appreciate your feedback and for letting me know.
@georgeh1352Ай бұрын
How does the ECU know that the CAT is in the ready state? is the ECU interpreting the downstream O2 sensor reponse?
@RANDOMFIXАй бұрын
Yes, in a sense. Catalytic converter are triggered and so once the right the right conditions ( parameters )are met the ecu will show it’s ready.
@naresh11163 жыл бұрын
Thank you so much... It worked really well for my 2009 honda odyssey. 👍👍👍
@RANDOMFIX3 жыл бұрын
Thank you so much taking to time post your success with your 2009 Odyssey, much appreciated ☺️