Range Rover Evoque, Spray Painting

No video

Range Rover Evoque, Spray Painting

Рет қаралды 1,550,408

Күн бұрын

In this video I will take you through the procedure of spray painting this Range Rover Evoque in Firenza Red Paint Code 1AF, this color is also on some of the recent Jaguars but named "Italian Racing Red", it is a slightly different variant to the Jaguar color but very similar and they both share the same paint code.
I will go right through the job in detail and also prime the repairs using Metalux UV Cured Primer.
For loads of Paint & Panel articles and Gunman Merchandise see my website through this link thegunman.net.au/
To keep up to date with all my latest work Subscribe to my Channel/
If you would like to see some unedited raw footage of my work then visit my other channel The Gunman RAW / @thegunmanraw
See links to my other social media here.
First is a relatively new platform called Minds, with Facebook, Twitter etc. Censoring what they call "Fake News" a lot of us creators are looking for alternative platforms and I recommend checking out Minds.
Minds
www.minds.com/...
Instagram
/ the__gunman
Follow me on Twitter through this link
/ gunmanthe
Flickr
www.flickr.com...
Tumblr
www.tumblr.com...
Vine
vine.co/u/1196...
Give my Facebook page a like by clicking this link
www.facebook.c...

Пікірлер: 356

@tylerjhb9101 7 жыл бұрын

You're videos are by far the best on KZfaq. I usually watch Atleast 3 of your videos before I go to sleep. I spray paint on planes but I've never owned a setup of my own and this week I think I'm finally going to buy my own spray gun, your videos helped me make that decision a ton, I've learned so much. Hope you don't stop making these videos.

@Flaviodallas 6 жыл бұрын

I am amazed by the technique. Even when you tape it, I can see the way you look at the work structure. The camera moves (with your eyes) and covers nicely the surface... as we see it again when you spray. Good focus and discipline. Very organic! Thanks for sharing your talents!

@richh7872 5 жыл бұрын

Just finished my first small respray on my vespa scooter (in this colour), learned how to do it from watching loads of your videos! Really pleased how it turned out, great channel! Cheers 👍

@xzachx2112 7 жыл бұрын

love the attention to the seam sealer in this video, and the emphasis you put on good prep work in all the videos. I prepped for a while and painted, its all a system it all needs to be done right.

@TheGunmanChannel 7 жыл бұрын

That's it, you need to get the procedure right or it's a recipe for disaster.

@southrock3375 7 жыл бұрын

You are a credit to painting for your skills and hard work to show us, thanks

@GimpSlayerGeneral 7 жыл бұрын

Dear Gunny, You is a pro, firstly, and secondly you are passing on your wealth of experience to us nube's and pros's alike. You obviously love what you do? You take your time to provide excellent vid's, that to takes dedication. Don't feel you gotta keep banging vid's out, you cover most aspects of your profession in the body of work already on your channels. You can now pick and choose the projects you want, you can comment or not. You have the control man. I am an enthusiast and am into cars and all aspects of working on them, from engines, bodywork, paint etc. You have given me the enthusiasm to approach doing the bodywork and painting for myself. I am slowly collecting tools to complete a car project of my own. Guy's like you inspire and motivate! You are out there now and people know you, the circle is going to get bigger. Chill and do what YOU want, people like to see a pro work, and sometimes they like some info to. I appreciate every vid you have done that I have watched, so cheers buddy. I to am not looking for any friends, and like you have not even a handful I trust etc! So Brother, get out there and shit some paint!

@TheGunmanChannel 7 жыл бұрын

Thanks mate very nice message.

@OFFICIAL_VIDEO_AWARDS 6 жыл бұрын

I watch these because its like having a convo with you while you work. Plus great tips, much appreciated.

@ThatV12MiataBruh 6 жыл бұрын

Hey Gunman I am a PDR technician from South Africa and I'm currently dent pressing hail damaged Land Rovers at a Land Rover factory approved panel shop and the Aluminum panels are really tough but I am doing a great job. I wish you could come paint here, it would be a really cool. You are the best

@dezzymeriei 7 жыл бұрын

When I watch videos like this, it makes me want to paint something.

@TheGunmanChannel 7 жыл бұрын

Now "Get out there and Paint some Sh!t" :)

@dezzymeriei 7 жыл бұрын

Haha! 💞

@mounirartists7409 7 жыл бұрын

Dezzydaze hey how are you

@elveezultraTECH 7 жыл бұрын

nailtoes ?

@mdraza8626 7 жыл бұрын

i lobe u

@PiliaeAl 7 жыл бұрын

Thumbs up your a natural speaker. Gift of the gab. Awesome work!

@archiemelton9777 7 жыл бұрын

Thank You so much for the inspiration & knowledge. I lost my job 6mos ago & was able to keep SUV payments because of Wat I learn watching you. painting bikes kept me afloat. I got out there & painted some SHIT. lol

@minislayer2010 7 жыл бұрын

I used to work at Range Rover building these. Always liked the Firenze Red and Baltic blue

@ThurgoodJenkinz 7 жыл бұрын

A good thing to remember and always be cautious of when you're taping the plastic to your back masking tape, is to tape as close as you can to the panel covering up as much exposed sticky side of the back mask tape as you can. When you are wiping down the panel with wax and grease remover you can inadvertently wipe over the sticky side of the tape and drag in onto the panel without knowing it and cause issues. So i always try stay as close to the panel, covering up as much exposed sticky side of tape as i can.

@TheGunmanChannel 7 жыл бұрын

That's a good point, maybe I should keep an eye on that myself. Thanks for the input.

@BobSmith-uz4zw 7 жыл бұрын

I'm not in the paint industry at all, and I'm not sure how I started watching your video. Great video and pride in your work. Would be nice if more people in the US would be more mindful of their work. But I've visited Melbourne and Cairns, Cairns was amazing.

@TheGunmanChannel 7 жыл бұрын

I've never even been to Cairns, furthest north I've been is Brisbane. I'm living in Perth now and it's great over here. I'm glad that my videos are interesting to people from outside of the trade so thanks for watching.

@grahamwerner8386 7 жыл бұрын

your paint gun lays down paint so so so so smoothly it's amazing

@bluepixelchicago 7 жыл бұрын

watching you paint is more relaxing than watching fish swim in a tank

@crazymarge1 7 жыл бұрын

non catalised sealer will react to final wash/wax remover..it will make fisheye by contaminating the cloth. better to clean it with windex or non solvent base cleaner... gotta love the Segola guns !! ;) they do work very awsome... keep up the good work

@alexr4968 7 жыл бұрын

Seeing those silicone spots on that door had me remember a story a friend of mine told me. So apparently the Ford dealership here in the states had problems with fisheye on almost every vehicle. They thought the painter was not cleaning the vehicles properly so they observed him and he was indeed cleaning them correctly. They kept calling the booth manufacturer and they eventually came out to look at the booth and they claimed nothing was wrong. Anyways one day the main painter called out sick and they had no problems with fisheye that day. After some time they eventually found out that the main painter wore "Axe" deodorant that contains silicone and when the painter would sweat it would release into the air...

@user-dv4em5pw9r 6 жыл бұрын

Alex R

@mrmuskey5202 6 жыл бұрын

I had intermittent fish eyes one time over a few months, maybe on two vehicles, once a month, Turns out the Car delivery vehicles where unloading cars and left the truck running to close to the booth intake. Felt like killing someone, glad I discovered the problem after I went out for a smoke after a Viper complete was effected and I went out side to cry.

@uveshramrathan7436 7 жыл бұрын

great channel gunman I've been watching alot of your videos I'm all the way from south Africa recently qualified last year but been in the trade for 6 years keep up the great videos mate

@jefft5175 7 жыл бұрын

Nice work man, good to see quality work at a production pace, Your masking skills are unprecedented lol. Been painting commercial( transport fleet) for years and I could still learn a few things from a guy like you. Keep it up!

@wazid0122 6 жыл бұрын

in my bodyshop i would spray just what u did but i would install the door an spray the last coat of red just to make sure the colour matches then remove an clear but hell of a job

@lukeevans162 7 жыл бұрын

Lol good masking advice aha "well i want paint there.. and i don't want paint there" -gunman 2017 love it

@DAKOTANSHELBY 6 жыл бұрын

From greater Chicagoland, love your videos Gunman!

@Mikefngarage 7 жыл бұрын

t20 is legal in some areas of CA. But I use HVLP because they are not legal in most areas near Los Angeles. I dont notice much difference but I need to turn my fan in about 1 turn to avoid a void in the center of the fan.

@patricebellus1757 7 жыл бұрын

Hello Gunman, you are really the boss!

@jasonevans6720 7 жыл бұрын

Gunny, i know Sagola have made a GREAT gun and i will be getting a pair when they come out but the Devilbiss looked effortless. As you probably know i work for JLR and that looked a pucker job

@TheGunmanChannel 7 жыл бұрын

Thanks again Jason, be sure to let us know your thoughts on the Sagola.

@georgizlatinov5039 7 жыл бұрын

Great job Gunman

@DVTY1 7 жыл бұрын

i can watch this for days

@memodatroll 7 жыл бұрын

you can use all this air caps here in California, just takes a long time to get stuff approved here, we where just approved to use Sata RP in San Diego

@TheGunmanChannel 7 жыл бұрын

That's just annoying, I would have to smuggle some in if I lived there.

@DjZeroPlayer1 7 жыл бұрын

i love this job, but at the moment my workshop has not much work, its kind of annoying bc you have to be there 8hrs, but we get another "restauration" project type of car so i got enough to do as an apprentice

@kevingliebe5607 6 жыл бұрын

You need to start doing 4K videos. I want to see that shiny paint job up close.

@TheGunmanChannel 6 жыл бұрын

4K is ultra demanding on everything, camera shuts down from overheating after 5-10 min, video files are massive, video editing is much slower even with good computers, maybe one day but not for now sorry.

@jrmathes6567 5 жыл бұрын

I know it's an older vid mate, but that was outstanding.

@TheGunmanChannel 5 жыл бұрын

Thanks!!

@DonPaco. 7 жыл бұрын

Great video! excellent content you have man! i sure do miss working in a bodyshop

@dowserdude 7 жыл бұрын

Ah, poetry in motion..

@alexandertalbot3726 7 жыл бұрын

Top vlog ! Also booked Thailand after watching your Thailand vlogs mate , going to Phuket in November 👍

@frankozzie1 7 жыл бұрын

wicked job gunman.

@anthonybrennan1075 7 жыл бұрын

Another great vid Gunny. Love that song too 'Virtigo'.

@nunyayourbusiness7327 7 жыл бұрын

good job do a vid on using a mixing cup please

@zulhelmy6875 7 жыл бұрын

very neat and clean works. keep it up

@TheGunmanChannel 7 жыл бұрын

Thanks.

@weekendg0lfer162 7 жыл бұрын

loving the videos. Can't wait to get set up

@TheGunmanChannel 7 жыл бұрын

Thanks mate and good luck.

@weekendg0lfer162 7 жыл бұрын

Thank you.

@DaSpedzaMotoVlogs 7 жыл бұрын

Congrats on the 1million views Gunny 👍🏻😃

@TheGunmanChannel 7 жыл бұрын

+DaSpedza MotoVlogs Cheers DS👌🍻

@georgeparedes4550 7 жыл бұрын

I'm from Texas I wish I could take my c10 to you haha

@crazysisters8165 7 жыл бұрын

ď l

@renovations22 6 жыл бұрын

You are amazing my friend

@mr.wizeguy8995 7 жыл бұрын

My friend run car paint business and he has used water soluble base coat maybe around 10 year and reason was EU rules. Only clear coat and primers is solvent based.

@tommykam7704 7 жыл бұрын

wow...nice clean job bro

@TheGunmanChannel 7 жыл бұрын

Thanks

@Johnaholic32 7 жыл бұрын

Have you ever notice on the blend where you spray the sealer. It looks a bit smoother from having an extra coat? Maybe I'm hammering it on. 😂

@samuelduquesnoy4272 Жыл бұрын

Nice job man !

@creepa9 7 жыл бұрын

nice one geeze, i do the same thing . keep up the good work.

@jameswil 7 жыл бұрын

hi gunman, I'm a recent subscriber as I've been watching your videos to learn, I'll be having a go at painting my car in a couple months after I've finished my welding and bodywork. I was just wondering what's the reason why you didn't paint the front door all the way with colour? is this something to do with blending it in? why wouldn't you go all the way to the end? your videos are a great way to learn while listening to your explanation! glad I found you channel! thanks!

@mounirartists7409 7 жыл бұрын

jameswil hey jameswil

@ptroinks 2 жыл бұрын

That colour is fucking gorgeous...

@rb.867 5 жыл бұрын

Great job

@moss745 3 жыл бұрын

Excellent grade 👍👌

@Max-mu2ts 7 жыл бұрын

very nice

@fos2462 6 жыл бұрын

loved the non stop talking skill...

@TheRomeo1580 6 жыл бұрын

Amazing Work Man!!!

@cordellmckie8859 7 жыл бұрын

1m views...good job bro

@TheGunmanChannel 7 жыл бұрын

+Cordell Mckie 🍻🍻🍻🎉🎉🎊🎊🎊🎉🎉

@richardlongmore9301 7 жыл бұрын

Like the tape round the wrist. Never seen that befour

@TheGunmanChannel 7 жыл бұрын

+Richard Longmore 👌

@richardlongmore9301 7 жыл бұрын

I tryed it today and my stupid hand was to fat to go through the hole :)

@TheGunmanChannel 7 жыл бұрын

😂😂😂😂

@lucenaautorepairs8868 7 жыл бұрын

estar de parabéns aqui no Brasil temos também bons pitores de automóveis eu trabalhei em várias concessionárias sou pintor também tenho um sonho de sair do meu país para outro país e ganhar muito dinheiro com o belo trabalho e qualidade pintura automotiva ...

@Flitzer514 7 жыл бұрын

Awesome!

@jasriejasmi1833 6 жыл бұрын

Really like ur job man..i watch a couple of your video's n they are awesome...

@Chingdogs 7 жыл бұрын

Painting the ute this colour, was sick to see it in one of the videos

@TheGunmanChannel 7 жыл бұрын

Awesome colour.

@user-mg7my4wh5u 4 жыл бұрын

I use grease when lubricating the sealant

@marek.plakiernik.3410 7 жыл бұрын

super.

@dlamb999 7 жыл бұрын

stunning. great vid

@satarp4588 7 жыл бұрын

классный ремонт!!! интересно смотреть видео 😀

@TheGunmanChannel 7 жыл бұрын

Thanks for watching :)

@jameslorows6357 7 жыл бұрын

you the man

@HankScott 7 жыл бұрын

Beaut, mate!

@masterjeka 6 жыл бұрын

paint coverability generally supper ))

@JohnataSuzart 7 жыл бұрын

very Nice man. muio bom!

@tjendristambahani.5991 7 жыл бұрын

Good job....

@kwstasavramidis425 7 жыл бұрын

PERFECT..

@seyirdefteri7842 6 жыл бұрын

clearly work...

@frederickmaravillosa9581 7 жыл бұрын

Good job bro thanks for your video from Philippines

@elarceliano4186 4 жыл бұрын

Buen trabajo. 👍👍👍👍👍

@jdo.vids.6843 6 жыл бұрын

nice guys,good videos

@rodadve 7 жыл бұрын

Woww! nice work dude. congrats

@TheGunmanChannel 7 жыл бұрын

+Roddd thanks for watching I really appreciate it.

@garyp1533 7 жыл бұрын

Great job!! Do you like the iwata lph 400 gun? If so what air cap do you like for Clear the chrome one or the orange one? I use the 1.3 tip.

@ec5074 7 жыл бұрын

how could you thumbs down this vid. oh you must suck at what u do!!! aye mate this is an awesome video bro this paint job is sick!!!

@TheGunmanChannel 7 жыл бұрын

Thanks for the support mate :)

@binakhasametaj4529 7 жыл бұрын

Eric Col

@jabber67 Жыл бұрын

Jaguar call it italian racing red and sometimes its a 3 stage pearl

@stefano669 7 жыл бұрын

VIDEO FANTASTICO

@iouch9294 7 жыл бұрын

très bonne travaille

@mbahdurgochannel4304 7 жыл бұрын

Mantap kang,inyong milu latihan manggelah...

@trustgodcvdood 7 жыл бұрын

What makes certain car paints better, and why not cheep out and use regular Rustoleum style paints? As someone who wants to do a fun DIY project, how can I make the job seem as if it was done by a professional and still stay under budget?

@TheGunmanChannel 7 жыл бұрын

Years of fucking shit up got us where we are :)

@mattsez2879 5 жыл бұрын

im sure you get a million questions....but im getting ready to paint my goldwing....and i saw a bike that was black, except where the body was direct flat to the sun....then it was pearl deep red. I was told ad the pearl to the black base....not the clear to get that ghost result....would you agree???

@geoffreyotieno9709 6 жыл бұрын

I love thz painting guy's hey ua coating is smart

@Bytrl 7 жыл бұрын

Gunny I think I know why this vid blew up the way it did. Your name is the gunman, and you published it on inauguration day here in the states. Allot of people were half expecting a George soros funded sjw or blm false flag of sorts during the innaguration of our first real president in ages. You know. Half our country is asleep and has deeply embedded entitlement issues, so they can't bear the thought of having to work for a living. Anyway, that's my theory. Keep up the great work, and PLEASE keep the vids coming. Your vids and knowledge have helped me hone in my skills and make me thousands of dollars in side jobs. Thank u so much. FLG5 / Gpi all the way;)

@DEEPWATER.. 7 жыл бұрын

the gunman you are the best in the west ....my work is only in the small parts motorcycles paint so what the best for clear coat ? sata rp 1.2 or hvlp ? please

@CaptainBash737 7 жыл бұрын

Arright Gunny how are 'ya. Still lovin ya videos mate. Still learning loads. I've just finished the underneath of my E type bonnet and it was a bastard. Especially the clear coat with all of the corners and details. I kind of figured my way through it but if the opportunity comes up is there any chance you could do a video on painting in hard to get, tight spaces? 'Ya know inside wheel arches, corners of chassis, underneath E type Jaguar bonnets? Anyway I just wanted to say thanks for arming me with the knowledge to attempt this bloody thing. 😁 all the best man!!

@TheGunmanChannel 7 жыл бұрын

Good timing man, I just received a few mini guns and I just finished making the first of a few reviews. But my advice is get a mini gun for those spots.

@CaptainBash737 7 жыл бұрын

The Gunman nice one man. I've got a little cheapy mini gun but I should really get a decent one. My main problems were getting enough pressure to atomise the clear but keep it low enough to not get that frosty dry spray shit when the paint starts swirling around the tight corners. The bonnet as ta know is massive and I had it on a jig that mimicks the car so I'm spraying upside down which isn't ideal. I had a few base coat retouch ups because I knocked it with the pot of the gun. Not to mention banging my head. This wasn't as moronic as it sounds but you'd have laughed ya arse off. It was quite difficult to keep it all wet too as it's huge. As I say, any other hint you've got I'm more than happy to receive. You need to have a fan section somewhere so we can send ya the photos of what shit we've been painting. I'm telling ya mate I would have struggled without your vids. All the best again. Baz

@TheGunmanChannel 7 жыл бұрын

Barry Jones That's actually a good idea, I may be able to create a page on my website like a forum where people can create a post and others can check it out.

@fengzihengfeng9188 7 жыл бұрын

Can you teach me how to spray it? The How can the paint guns tune? I am an apprentice. I love this job very much

@baatzperformance 5 жыл бұрын

Mega Job

@crazymilk5611 7 жыл бұрын

Ace video G'man. I am having some really bad issues with my paint sprayer not being able to match a repair with this colour. Is there anything in particular needed to work this match out??

@TheGunmanChannel 7 жыл бұрын

+Riverseal by Rivertex in Standox solvent it's a mix & paint formula but we had to order in a new tinter for it. Cranberry red 816 was the tinter from memory.