Range Rover P38 & Discovery 2 Ball Joints removal/refit -short video
Рет қаралды 731
3 ай бұрынThis a cut down video of my step by step on how to change the front ball joints.
Full a full step by step please go to: • Range Rover P38/Discov...
I hope this helps you out.
@simonstuhl4170 2 ай бұрын
Nice thanks for the video
@LandyManLewis Ай бұрын
No problem 👍
@ned900 3 ай бұрын
Good effort. It is hard to do the first time round, I just did one of mine. Not so worried about the next one.
@LandyManLewis 2 ай бұрын
Thank you, I agree first time this job took me two days but when you work out where to apply the pressure and the best way its easy. Good luck with yours for the other side.
@fingerbass915 Ай бұрын
Any video on taking off the hub carrier as I have seen many people struggling with getting them off,, Many thanks Chris
@LandyManLewis Ай бұрын
Hi Chris, it's covered in my full video attached to the end of this one. They can be a pain to get off.
@fingerbass915 Ай бұрын
@@LandyManLewis many thanks for your reply ,, is it possible to just replace the bottom ones? Chris
@LandyManLewis Ай бұрын
I guess so but if ones gone I would swap both anyway. Its easier with the top one removed to get the clamp in.
@fatbobandy9670 13 күн бұрын
Nice and easy ! Is that tool the same as the £30 ones on eBay ?
@LandyManLewis 13 күн бұрын
It is indeed, but I bought this about 5 years ago. it's been put through it paces.
@trentcoubrough5476 2 ай бұрын
P R O M O S M 😞
Budget Mechanic
Рет қаралды 1,4 МЛН
Daniel&John
Рет қаралды 18 М.
BalcevMMA_BOXING
Рет қаралды 18 МЛН
Landy Man Lewis
Рет қаралды 5 М.
Landy Man Lewis
Рет қаралды 339
Jaguar XK8
Рет қаралды 416
MMG-service
Рет қаралды 8 М.
Wardys Worx
Рет қаралды 7 М.