Yamaha Raptor 700R Engine Build

Yamaha Raptor 700R Engine Build | Partzilla.com

Рет қаралды 1,682,174

Күн бұрын

Rebuilding the engine on a Yamaha Raptor 700? We’re doing an entire Raptor 700 engine build from start to finish.
Note: our phone number has changed! Call us at 1-229-584-0046 for help finding the right parts for your maintenance needs.
Check out all of the parts here:
Bottom end build parts: bit.ly/Yamaha-Raptor-Engine-Bu...
Oil pump and shift assembly parts: bit.ly/Yamaha-Raptor-Engine-Bu...
Clutch and water pump parts: bit.ly/Yamaha-Raptor-Engine-Bu...
Flywheel, stator, and starter installation parts: bit.ly/Yamaha-Raptor-Engine-Bu...
Cylinder and piston parts: bit.ly/Yamaha-Raptor-Engine-Bu...
Top end build parts: bit.ly/Yamaha-Raptor-Engine-Bu...
Head installation parts: bit.ly/Yamaha-Raptor-Engine-Bu...
Watch as John builds a Yamaha Raptor 700 engine from the bottom up. We’ll start with the bottom end, where we’ll get everything cleaned up and then press bearings into our crankcase halves. Then, we’ll install the crankshaft. Next, we’ll move up the engine and get the oil pump and shift assembly installed.
With that finished, we’ll build the clutch and install the water pump. Once that’s done, we’ll work on getting the cylinder built, which includes a Wiseco piston installation.
Then it’s on to the top end, where we’ll show you how to lap the valves and get the camshaft installed. Finally, we’ll get the head attached to the engine.
See the Yamaha Raptor engine build in seven parts here here: • 2017 Yamaha Raptor Eng...
Check out the diagrams here:
Crankcase cover diagram:
www.partzilla.com/catalog/yam...
Crankshaft/piston diagram: www.partzilla.com/catalog/yam...
Shift cam and fork diagram:
www.partzilla.com/catalog/yam...
Transmission diagram:
www.partzilla.com/catalog/yam...
Oil pump diagram:
www.partzilla.com/catalog/yam...
Clutch diagram: www.partzilla.com/catalog/yam...
Water pump diagram:
www.partzilla.com/catalog/yam...
Starter diagram:
www.partzilla.com/catalog/yam...
Stator diagram:
www.partzilla.com/catalog/yam...
Camshaft and chain diagram:
www.partzilla.com/catalog/yam...
Piston diagram:
www.partzilla.com/catalog/yam...
Cylinder diagram:
www.partzilla.com/catalog/yam...
Valve diagram:
www.partzilla.com/catalog/yam...
Cylinder head diagram: www.partzilla.com/catalog/yam...
VIDEO HIGHLIGHTS:
Crankshaft - 5:00
Transmission - 14:21
Clutch - 32:00
Flywheel - 48:00
Piston rings - 1:00:00
Cylinder assembly - 1:12:00
Valve Lapping - 1:15:00
Head Assembly - 1:21:00
Cam Timing - 1:28:00
Valve Lash - 1:35:00
Find thousands of Yamaha ATV parts here: www.partzilla.com/catalog/yam...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2017 Yamaha Raptor 700R, but you may have similar steps for your Yamaha ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Yamaha R6 engine build playlist:
• Yamaha R6 Engine Rebuild
Yamaha YFZ450R repairs:
• Yamaha YFZ450R Repairs

Пікірлер: 343

@Webic33 4 жыл бұрын

Thank you to everyone who made this video possible. Very informative and good camera work.

@petterihamalainen8291 2 жыл бұрын

I Hawe SUZUKI TSX 125 and IS good on My Mind!

@brianschott8162 4 жыл бұрын

I've no plans on rebuilding anything, anytime soon but I'm enjoying these videos!

@milktruk 4 жыл бұрын

This is one of the most comprehensive atv videos i have seen on youtube. Better than some instructional DVDs i have seen. Great job partzilla team.

@mostaphanouar2186 3 жыл бұрын

طق

@mikeeeg2010 4 жыл бұрын

Great job Partzilla. Your videos are very, very helpful. You are one of my go to’s for parts.

@hermitrob5481 4 жыл бұрын

Cool shit! Wish I had these vids 30 years ago!!! All those trips back and forth to the parts shop, from f**king something up! This generation doesn't know how good they got it!! Top notch!

@raptordan6851 4 жыл бұрын

After finishing the video I noticed at 1:36 you said the reed valve let’s pressure out . It actually lets fresh air into the exhaust side to burn off unburnt fuel , most likely to meet emission standards , however if the reed valve sticks or if the solenoid fails fresh air can be easily introduced to the combustion chamber causing a severe lean condition , raptor owners give yourself a price of mind and block it off ! Mr Cuervo racing makes a nice plate to block it off.

@kanehoward7050 4 жыл бұрын

This is one of the best engine assembly videos I've ever seen! You literally skipped nothing! Now if you would just make one for the other engines that I want to tinker with! Thank You!

@13nutkiller 3 жыл бұрын

YEAH SURE, FIRST FIVE MINS ALMOST BROKE THE CASES IN HALF! LOL

@MultiDude1995 3 жыл бұрын

Respect for this dude man... Hes a professional i could tell

@muhammadfirdausbinmohdhari8774 3 жыл бұрын

Pomen kampung tmpat aku tera lagi bang

@jeanhames4690 3 жыл бұрын

Hello Sir! It is always a pleasure watching your videos. I have been learning a lot from you, so thank you very much. Cheers from Brazil

@sentientdogma1206 3 жыл бұрын

You remind me of a strict teacher or a doctor with your demeanor. Very good video and I appreciate your knowledge and wisdom about your profession. An apprentice could learn a lot from you.

@santisima.2702 3 жыл бұрын

This is the best of the best step by step engine building tutorial i had ever watched.

@davidwilson8010 4 жыл бұрын

It's always my pleasure to learn from the best at what they do..I have Ben watching your program for a wile now..thanks a lot for your step by step in putting the engine tougher ..I respect you accept you put the boltes the wrong place..great it happens at times to the best..but we look over our work and correct it..thanks again and keep doing your great works and may God keep blessing you with ur talent ..You a great day and your family..be safe and take care❤👌👍

@Smalltechguy 3 жыл бұрын

Is that all John??? Just a little over 500 parts...childs play for you...holy cow...yeah I'll stick with my tractors and trimmers. I was hoping to get my timing chain out of my 350 without removing any of the gears toward the back...

@joshuagriffin5144 4 жыл бұрын

What a true professional! ! God bless you and your family

@danteblack9873 4 жыл бұрын

Awesome vid thank you so much very well done ordering parts now 👍🏼👍🏼

@RichM1983 3 жыл бұрын

How could you dislike this? Seriously? This was a great video. You did great work. Thanks for the video.

@jcaashby3 3 жыл бұрын

I have been building engines for quite awhile and I always learn a few tips and tricks that end up using in my engine rebuilds.

@blaketurner6492 4 жыл бұрын

Amazing work man. You are the best engine builder I'd seen. Whoever getting that motor for their project has a fine motor

@PartzillaParts 4 жыл бұрын

Thanks for watching!

@jstephens1193 5 жыл бұрын

I can't believe I watched this all the way through but I'm so glad I did👍🏿

@dssd650 2 жыл бұрын

I must say this video series has been absolutely amazing! I just completed the build on our raptor 700. It has been so nice to be able to watch a video step by step with all the little tips and tricks to get this done! Thank you partzilla for putting this together!

@PartzillaParts 2 жыл бұрын

Awesome! Glad you dug the video. This one is one of the most popular on our channel.

@YusufFadillah 3 жыл бұрын

damn, why i'm enjoying you assembly/disassembly the engine. What a Pro!!!

@hidinfrombiden6251 3 жыл бұрын

I don't even have a Raptor 700R, I have a Raptor 660R, but I was bored and watched this whole video. Great informative video!🤘😎

@User37621 4 жыл бұрын

Thanks John you are the man 👍🏻

@Farcasstudio2000 4 жыл бұрын

Nice to see this ,keep going

@RussellSSmith 2 жыл бұрын

Thank you for your great instruction - easy to understand and follow.

@jpwerth8610 5 жыл бұрын

Watching your videos makes me feel like a kid again, wishing you were the grandpa I never had! Really informative and enjoyable to watch!

@PartzillaParts 4 жыл бұрын

I just got grandpa'd. Thanks for watching!

@jpwerth8610 4 жыл бұрын

@@PartzillaParts I meant it with the utmost respect! Haha. Keep it up!

@PureMocro 4 жыл бұрын

Same feeling here. Such a great guy, I can already say. Want to hangout with him in the weekend helping him out doing some engine rebuilds.

@ekaitzrubio2613 3 жыл бұрын

Uuuu

@PawanKumar-us7cs 3 жыл бұрын

@mack1biz249 2 жыл бұрын

That’s not your first day at the rodeo is it. We couldn’t ask for a more detailed or professional tutorial on the assembly. Well done and thankyou for your time in sharing.

@Davido50 3 жыл бұрын

Love my Rapter 700R-SE! Get one before they don't make them anymore! Best big bore sport quad ever made!

@ofueru2219 4 жыл бұрын

1h40 of pure pleasure !!! Can you please make some videos on electric problems just a little more "harder" than a battery problems Thx a lot

@ALuna244 11 ай бұрын

This helped me so much rebuilding my Raptor 700!

@dannydepino3874 3 жыл бұрын

Great video very organized clean and well explained really enjoyed watching.

@gregbrady8454 4 жыл бұрын

Awesome Job dude. This video is great because its a professional.

@MOAB-UT 3 жыл бұрын

Good job. I would recommend you use a small silicone brush to brush the oil onto those shafts. Keep the oil in a small container you can dip the brush in. Wear gloves too and use billet gears. Don't drop gears in, carefully place them evenly into the case. That is probably why that first one got stuck and went in crooked which, when pressed can damage the casing. Good tip on the feeler gauge and Loctite. One the head bolts, probably better to freeze them vs. adding oil to them. After all that work, would have like to seen the start up.

@Bemaritohtori 3 жыл бұрын

Great video! A nice trick I found out was to use a tire valve tool to insert those circlips!

@raptordan6851 4 жыл бұрын

Great build , I am also a fan of freezing bearings and cranks , when there are existing bearings in the case I use a heat gun , aluminum is so conducive , I once put a crank in with a tap of a 1lb rubber mallet .

@WolfBand626 2 жыл бұрын

Awesome video. I love the detail!

@yonyspena7913 4 жыл бұрын

WAOO!!AMAZING!! PROFESSIONAL!! THANKS.

@dougiequick1 3 жыл бұрын

LOL Dont know why I am watching this as I have zero intention of doing this ..just kinda fun to watch engine builds ...vicarious satisfaction

@immelting9834 2 жыл бұрын

I can't express how great and amazing this build video is. I would love to see a VTX 1300 engine build . . Do you have more videos just like this , and with this much detail ?

@36SBC 3 жыл бұрын

That was so satisfying 😍

@anthonyk6265 2 жыл бұрын

hell of a build

@troycrowder9942 4 жыл бұрын

nice work its always nice to see your videos along with the work you do witch is spot on you do a fine job teaching others that need the knowledge like me and you do answer questions for those that need your knowledge because you have helped me thanks again i enjoyed your video and keep up the good work i have to go back to work myself i have a Kawasaki bayou that needs some spark and my job is to find the way to make that happen take care

@sisimons7998 3 жыл бұрын

TRICKY HELL ! THIS GUY IS A JEDI MASTER !

@troycrowder9942 4 жыл бұрын

i like how you operate nice work nice and neat i watch you because you do things right and tell it like it is

@alejandroduran8164 4 жыл бұрын

...just amazing vid.... Hat off...

@jessecoleman9475 2 жыл бұрын

That's skill.... nice work

@onlineincome1704 4 жыл бұрын

Amazing skill

@Ridevenice 4 жыл бұрын

We don’t get to hear the first startup! Coooome on!!

@enzounivers314 3 жыл бұрын

U bby gdc xu

@oliverbreit9334 3 жыл бұрын

Thank you. I learned a lot.

@azatrike8702 2 жыл бұрын

My new fav channel

@brianeveritt1326 4 жыл бұрын

Watched and enjoyed every minute of this instructional video, greatly appreciated the explanations of every aspect from beginning to end. Need to get me that valve lashing tool for sure... Subscribed to your channel great work

@RICHIE_RICH89 2 жыл бұрын

Man id love that puppy

@TheCrys1976 3 жыл бұрын

I just subscribed that was an awesome video I learned a lot of cool pointers well done looking forwards to more videos

@donovanwashington1347 4 жыл бұрын

Great video 👍

@deepakpatil1488 4 жыл бұрын

Great job sir

@issamatm5499 4 жыл бұрын

God job , you are awesome I like your job way ❤️

@arlesnunez1647 3 жыл бұрын

Excelente canal. Mi admiración para el maestro. Saludos desde San pedro sula, Honduras.

@Op05 3 жыл бұрын

Outstanding JOB, very clear and smooth.

@lucasgreenwell3373 3 жыл бұрын

@cbr600rrturbo 5 жыл бұрын

1986 Trx250r series would be awesome!

@markbudd2809 5 жыл бұрын

great video

@winzyinspiringchannel 4 жыл бұрын

Amazing 😉👍🏻

@bucketmouthinc2937 3 жыл бұрын

For funsies see how many times you can say “That’s what she said!” Throughout this video. 😂

@ahmeddawoud7994 2 жыл бұрын

@hanchonglim4020 2 жыл бұрын

@@ahmeddawoud7994 pppopppppooooppppppopppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppoppppppppppppppppppppppppppppppoppppppppppoppppppppppppppppppopppppppopppppppppppppppppppppppppppppppoppppppoppppppppppppopppppppppppppppppppppppppppppoppppppppppppppppppppppppppppppppppppp

@Noah_O_ 2 жыл бұрын

167

@nighthawkj30A4 4 жыл бұрын

John Excellent Technician makes everything so perfect.

@amanteapasionado6836 4 жыл бұрын

I good shop with all the right tools

@SalmanKhan-yc8qg Жыл бұрын

Love this guy

@oldschoolmotorsickle 2 жыл бұрын

I’m a 2-wheeler type enthusiast, but the Raptor engine is quite similar to a Moto engine. Nicely engineered. Excellent build video too. Wiseco pistons have come a long way from the old heavy seizure-prone 2-stroke pistons of the 60s and 70s!

@blancosal 21 сағат бұрын

It's really really similar to the XT660 line... Minarelli engine.

@IhateYoutube 4 жыл бұрын

That was one exquisite in depth build vid. Kind of makes me glad I just had Yamaha build my Raptor engine though... LOL

@racequad9 4 жыл бұрын

How much did they charge you for the rebuild?

@ramakrishnegowdatr4888 2 жыл бұрын

VERY nice executions, MANY THANKS SIR God bless you sir 🙏🙏🙏

@ziedmanai5029 3 жыл бұрын

just amazing !!!

@richardwallace5322 4 жыл бұрын

Wow! This is the best instructional video i've ever seen. I never subscribe, but in your case, I just had to.

@PartzillaParts 4 жыл бұрын

Thanks for watching!

@scottwebb4648 2 жыл бұрын

Awesome videao and onggoing reference for my stroker crank and bb kit install

@FlightSergeantRose 3 жыл бұрын

This is amazing.

@Gridnev93 3 жыл бұрын

Realy cool!!! Thank you)

@alejandrogrisales7151 2 жыл бұрын

Ingeniero, usted es el mejor, en sus videos son de alta calidad en todo, producción audio visual, su profesionalismo, repuestos Partzilla, en todo definitivamente

@sinistercat-jm4lk 4 жыл бұрын

Great job!!!

@ME262MKI 5 жыл бұрын

Amazing tools you have there

@Alaska7506 2 жыл бұрын

Man your videos are top notch! Thank you and your crew for sharing your knowledge with the world. But on another note, I sure hope you didn't forget to go back and tighten the two cam gear bolts, cause I don't remember seeing you go back after installing the chain tensioner and tightening them up. I'm sure you did, but that's just one thing I noticed.

@anthonyk6265 2 жыл бұрын

Legend has it those bolts flew off detonated the engine

@Alaska7506 2 жыл бұрын

@@anthonyk6265 Yeah the piston would have had a fun time pounding the valves, not to mention the possible damage the cam chain and sprocket would have caused. But it would have been a quick kill, so not much suffering lol.

@RobertKohut 4 жыл бұрын

Nice!! Great video... :-)