Raptor Spray in Bed Liner DIY | 2021 Chevy Silverado 2500 Custom Duramax

Рет қаралды 19,928

2 жыл бұрын

This is my Spray in Liner project on my 2021 Silverado 2500 HD Custom Duramx Truck.
Here are the links to the products used in the video:
Raptor Bedliner kit: amzn.to/3g7bEqI
Masking Materials: amzn.to/3yQzZbH
Pressure Regulator: amzn.to/3sogEfF
Painting Resporator face mask: amzn.to/3k8BEU2
Here is a link to the playlist for this 2021 Silverado 2500 :
• 2021 Silverado 2500 HD...
For Promotional opportunities or business inquires email me at: Myksgarage11@gmail.com
The above links are my Amazon affiliate links, Which by using will support the channel. Thank you! The above links are my Amazon Affiliate links, as an Amazon Associate, I earn from qualifying purchases. Thank you for supporting my channel!

Пікірлер: 29

@Myksgarage 2 жыл бұрын

Link to bed liner kit: amzn.to/3k1PU0A Thanks for watching, be sure to like and subscribe!

@martinrodman3914 Жыл бұрын

Good video. Right to the point. I’ll be doing this to my 2016 Silverado LT in a few weeks. I have a shop I can spray in so maybe not as messy.. your work was very clean!!

@Myksgarage Жыл бұрын

Thanks for the comment, good luck your project

@BoStErO1905 Жыл бұрын

brave man, thanks for doing this

@Myksgarage Жыл бұрын

It wasn't too bad, the prep is the hardest part

@mrbeatty13able 7 ай бұрын

Excellent job.

@Myksgarage 7 ай бұрын

👍

@RyanHarker Жыл бұрын

Thanks for this video! So, I have a 2009 F150 that currently has a plastic drop-in liner. There's a bit of rust under the liner, so I'm thinking of spraying in a liner like this. What would you do about the rust?

@Myksgarage Жыл бұрын

I would just sand it down, even use a wire wheel, then just coat it

@dancarroll2820 2 жыл бұрын

Hello , did the joints of the bed (where the sides meet the bottom ) have a rubbery caulk ? If so, did you spray over it ?

@Myksgarage 2 жыл бұрын

Yes, just sprayed right over them

@dancarroll2820 2 жыл бұрын

Thanks !

@roberthaynes387 Жыл бұрын

Does it have to be a certain temperature if painting it on outside? Obviously not in the direct sunlight or wind.

@Myksgarage Жыл бұрын

The warmer the better, and yes, avoid windy days or direct sunlight

@mrbeatty13able 7 ай бұрын

I will look to see but if you haven’t can you do a two year update of this video? Thanks

@Myksgarage 7 ай бұрын

I sold the truck shortly after doing this

@je1279 Жыл бұрын

Do you have a water separator on your air compressor?

@Myksgarage Жыл бұрын

I do not

@robindthompson Жыл бұрын

Level with me dude how easy is it to mess this up? I have a 22 frontier

@Myksgarage Жыл бұрын

It's not hard, the prep is the hardest part, And then making sure you have everything taped off and covered so you don't get any of this bedliner on the paint of the truck. I say go for it!

@Guhtix10 Жыл бұрын

I do this professionally. As he said. It’s all in the prep. Spraying is the easy part. Just make sure you get high contact areas with proper thickness. And tape off your areas well and you’ll be fine!

@bblauter Жыл бұрын

It has now been a year, how did it hold up?

@Myksgarage Жыл бұрын

It's held up well, I've kept a mat on it so the mat as taken all the abuse.

@mattkaiser8984 Жыл бұрын

@Myks Garage Good idea!

@ihus9950 Жыл бұрын

How's it holding up?👍🏻

@Myksgarage Жыл бұрын

Pretty good, I keep a rubber mat on bottom so it doesn't get beat up

@ihus9950 Жыл бұрын

@@Myksgarage Good Idea👍🏻

@jimmyhamm6041 2 жыл бұрын

Anymore we all need to put our vehicles on a rotisserie and completely lingered underneath so as the salts and weather do not eat it away. IT sickens me you pay between 50 to 80 thousand for a new vehicle & nothing to protectthe under side and within 3 weeks it is starting to rust the new metal.

@Myksgarage 2 жыл бұрын

Yeah that is crazy that there is such little rust protection