SOLID! The $100 DIY Spray In BED LINER - Raptor Liner *Epic Results

Рет қаралды 415,527

3 жыл бұрын

Installing Raptor Spray In Bed Liner in my home GARAGE! I should have done this a long time ago.
Try it yourself! Link to kit used in video: amzn.to/36BXlVv
Mahalos from the Lonestar Hawaiian Garage!
Remember to SUBSCRIBE
Follow on Instagram @Lonestar_Hawaiian
Professional Inquiries: LSHawaiian@gmail.com
Get your LASFIT LED Lights Here! Get 10% off with code: LSH10
2020 Silverado Reverse Lights: lddy.no/pjle
2020 Silverado License Plate Lights: lddy.no/pjlg
Check out the Garage Build Series -
Garage Build Part 1 Clearance: • Building My DREAM GARA...
Garage Build Part 2 Walls: • Building My DREAM Gara...
Garage Build Part 3 Floor Prep: • Preparing GARAGE FLOOR...
Garage Build Part 4 Epoxy Floors: • Installing Epoxy [Poly...
Garage Build Part 5 Paint: • BEST PAINT for your GA...
Garage Build Part 6 Floor Boards: • Installing Waterproof ...
Garage Build Part 7 New Age Cabinets & Tool Box's: • NewAge Products Bold S...
Garage Build Part 8 LED Garage / Shop Lights: • BEST Garage / Shop Lig...
Garage Build Part 9 LED Garage Lighting Custom Setup: • Dream Garage Build Pt....
Aloha
#DIY #BedLiner #RaptorLiner

Пікірлер: 348

@texas15013 3 жыл бұрын

Tips from someone who used to spray bedliners.. if you want to cover up the holes in the bed you can use a small piece of masking tape to cover the hole before you spray and once the liner hardens it will be invisible... also use wire tape for the edges instead of masking tape (looks like pinstripe tape, but with a wire in it) that way when you get ready to peel the masking tape off you pull the wire to cut the bedliner so you can leave a clean edge and not have to worry about leaving tape behind that you have to pick out lol.. lastly and most importantly.. DO NOT close your tailgate for at least 24 hours, the liner is still tacky and can actually glue your tailgate shut! lol

@bdr3481 2 жыл бұрын

Hey boss, question for you to make sure I'm not being stupid. Places near me want $600+ to do my bed so if I were to buy 2 or 3 kits for $200-$300, that would solve the thickness issue while still being cheaper, correct? Or do these bedliner liquids not thicken up like I am thinking they would?

@texas15013 2 жыл бұрын

@@bdr3481 it’s been a while since I watched this video so I don’t remember the type of coating his spray was.. really depends on the type of bed liner spray and the job you want it to do for you.. it’s been about 10 years since I used to do it and I can’t remember the brand of the spray we used but it was like a rubber coating when it dried (which I think is similar to what he used) and the more product you used the thicker it would be.. it was perfect for keeping things from sliding around your bed while driving, but on the flip side since it was “rubber like” and it wasn’t durable so a thicker layer would be better.. but if your going to be throwing toolboxes and heavy items with sharp corners around in the bed I’d say you’d want to go with a bedliner similar to rhino liner.. it’s more like concrete and in that case you don’t need a super thick layer for it to be effective.. flip side to the rhino liner is depending on the texturing it can be rough on your knees when crawling around the bed and cargo may shift… it’s all pros and cons..

@bdr3481 2 жыл бұрын

@@texas15013 thanks boss

@fishbusters1046 Жыл бұрын

Do u peel the wire fresh or when gets dry? And do u lett it dry then apply another coat? I seen some videos like that but he used the whole 4 quarters at one time

@texas15013 Жыл бұрын

@@fishbusters1046 we used to peel the wire tape and masking tape off after about 15-30 mins or so while it was still tacky, but starting to cure.. instead of extra coats I would say do it all in one go, we used a spray machine to get it to about 1/16-1/8” thick and then did a mist over it to give it some texture.. a lot of the thickness needed really depends on the type of bed liner used.. stuff like rhino liner hardens like concrete and you can get away with a thin layer.. the stuff we used was more rubbery so we would spray a little thicker on the floor of the bed compared to the sides to give it more durability in the high use area.. I don’t know how that product would react to multiple coats over dried coats.. it may work out fine, or flip side the layers start to peel apart down the road..

@Reality--- 3 жыл бұрын

I have never once been in love with a garage before but yours is immaculate, id kill for your garage

@gobucs3146 2 жыл бұрын

Lol, I see garages that clean and empty and I’m like where do they put their stuff? I have a 3 car and couldn’t fit a Prius in there let alone my truck, lol.

@jennarojas7227 2 жыл бұрын

@@gobucs3146 M

@alersjjoutdoors6526 3 жыл бұрын

This is awesome that your using frog trap 🐸... I make that tape at my job... been making that tape for over 11 years and is awesome to see someone actually using it on cars...

@ericwallace1470 3 жыл бұрын

I make it too I’m a coater operator at shurtape!

@alersjjoutdoors6526 3 жыл бұрын

@@ericwallace1470 that’s awesome ya I’m a coater operator at plant 36 Shurtape hickory...

@NotMyNameEither 3 жыл бұрын

I'd recommend to do the top of the bed rails also. It protects them when something is slid into the bed.

@sundown798 2 жыл бұрын

Just finished my 6ft bed. 2 bottles on the sides 2 coates. 2 bottles for the bed plus tailgate. Worked out perfectly with a tiny bit to spare. Make sure you overlap 50% when spraying to avoid spray lines.

@The_ZenTex 3 жыл бұрын

I did this to my 2011 a couple years ago and its still holding strong...easy to touch up. I also sprayed the door handles, front grill, brush guard and about to do the entire truck.

@thebenson1983 2 жыл бұрын

How is your raptor liner holding up?

@mildtowildrc7343 3 жыл бұрын

Great video and done a few myself👍❤️Nothing like the self gratification of hard work and finished product💪

@ladytrucker50 3 жыл бұрын

Can’t wait to do my bed liner! Great video, it came out clean👍🏽👍🏽👍🏽

@dmarcusd21 3 жыл бұрын

Coming from someone that has worked at custom truck shop and did bedliners. Honestly this way better then any rush job they would make me do on the regular. They wanted bedliners done with in 2 hours. Prep and spraying. Can it be done yes. Does it look good. Yea. Is this DIY better than that. Hell yes it is. An you save so much more money from it. Good job man. Can’t wait to spay my 2012 Silverado beginning of the year

@LonestarHawaiian 3 жыл бұрын

I appreciate it!

@SantanaOutdoors813 3 жыл бұрын

It looks great. Your truck is nice also. I think you’d love Ez Armor for your tires. It’s a coating that you put on your tires. It’s not oily or greasy. Protects against dry rot and lasts a long time. The sweet thing for you and your truck is that it won’t sling at all onto your truck.

@bppro1 3 жыл бұрын

Raptor is amazing! I painted the bumpers and grill and mirrors on my new trailboss. So much better then that shinny thin paint 👍

@daytoningram2824 3 жыл бұрын

I’ve had it on my 2008 Silverado for a few months and has held up wonderfully!

@matthathaway6345 2 жыл бұрын

I just did my bed with raptor liner last night, looks really good. I used 30 psi, the texture was perfect.

@maninmotion8090 2 жыл бұрын

I just sprayed my Trail Boss this past Saturday with Raptor and it looks amazing. Professional results for a fraction of the cost. Thanks Chad.

@LonestarHawaiian 2 жыл бұрын

Right on!

@brettlanglois8769 8 ай бұрын

Thanks for the video! I’m prepping my new RAM right now as I await the Raptor liner to be delivered. Great job!

@raptor074 3 жыл бұрын

Really looks nice like the flat look ,getting one like that

@mark2524 2 жыл бұрын

Epic, and not just your garage! I'm officially convinced now that I'm not going to spray in my bedliner, way too much work for me & I'm trying to protect my original paint. Your truck looks awesome and its a great ad for Linex, err Raptor ; )

@jamescarey9197 3 жыл бұрын

Excellent D.I.Y. I think you sold me on the product, nice job👍

@Tricky_86 2 жыл бұрын

I like what you do to your Silverado and all your diys i recently just bought one black z71 LT 2013 love the truck... I've just been watching you the entire time since I bought my truck lol cheers bud

@heylookout3173 3 жыл бұрын

Aloha from Texas lived on Oahu for 6 yrs. My wife is a local girl. Bought my house in Waianae, love your videos I got a 2021 Silverado love it can't wait to do different mods.

@Get2Stucky 3 жыл бұрын

I just discovered his channel and love the name. We love Hawaii but live in the DFW area.

@felixmacias5157 3 жыл бұрын

All you need now to add the cherry to the truck/tailgate is a deezee tailgate assist! Game changer for your truck! Highly recommend for your Silverado 🤙🏼 🤙🏼

@alexward4569 3 жыл бұрын

Great work! Looks really nice 👌

@aniskoopman5793 3 жыл бұрын

Hi! This is my first video of yours I watched and I really liked it. I work in the detail department of a dealership and what we use to get over spray off; paint, floors, and basically anywhere is called: Clear Reflections "C-Solve" or Citrus solvent, it is an extremely harsh solvent that will basically just wipe the overspray bed liner off and also is very good for getting plastidip and other rattle can sprays off. We use it on new cars that get the undercarriage rust protection put on as the place that does it for us is very bad about overspray and the whole car is usually covered.

@LonestarHawaiian 3 жыл бұрын

Super helpful. Thank you for the info!!

@movementonwheels 3 жыл бұрын

I have a raptor liner truck and it’s good. I can recommend it for exterior look and light duty bed use. But it will never match line X for bed use. There’s a reason why line x bakes on and has a different gun with a lot of pressure. But I do recommend going thicker if it was my truck. If you toss a shovels, chain links or a metal house appliance it will scratch or chip easier than line x.

@kevinbeverlyjr1864 3 жыл бұрын

Looks really good great job 👏🏾

@midgetwitha50cal13 3 жыл бұрын

Nice job and that's an awesome garage setup.

@craig9069 3 жыл бұрын

Nice video! Was thinking of doing this on my jeeps interior!

@trunkykbk_2338 2 жыл бұрын

Thanks for the video Amazing job bro about to do mine 🙌🏼

@zero_cool817 3 жыл бұрын

That looks amazing! I’m gonna give it a go!

@LonestarHawaiian 3 жыл бұрын

Right on! BEWARE the overspray lol. Took forever to scrub off the floors.

@chrislee1000 2 жыл бұрын

Nice channel. All vids are very well done. Keep up the good work, Buddy.

@jeremyoshea7941 3 жыл бұрын

If there is one thing I love, it is Raptor, if one thing I dislike the most it is the sound of sandpaper scratching any surface! So it will be a lifelong situation I will get over...

@Legi52 3 жыл бұрын

Yessaahh right on bro🤙

@tpaulsmith7194 3 жыл бұрын

Nice job! You are the neighbor I always wished for! Lol

@UntameableVeteran 3 жыл бұрын

I did a rustoleum bed liner. Mine was glossy too, after a few months the sun will tame it down a few degrees.. looks good bro!!

@seanmathis7971 3 жыл бұрын

Watching your videos has given me the drive to start upgrading my 09 Silverado! I have a 3.5 lift kit at home waiting for a buddy to get back in town to put it on! I also have a sick off-road bumper and winch coming on Tuesday that’s also going on! Can’t wait! Ohh yeah and definitely gotta do this diy on my bed!!!

@LonestarHawaiian 3 жыл бұрын

Love it!

@NavyGuy2OO7 3 жыл бұрын

It looks alright, and would be fine on an older truck, or one you're not going to abuse too much. I wonder about the longevity of it, a LOT of the DIY spray liners tend to fade really bad after about a year. I had a '15 Chevy 1500 that I had sprayed with LineX and when I traded it almost 4 years later it still looked new after a fair amount of abuse. Had my new truck sprayed about 2 weeks after I bought it.

@juanpena1656 3 жыл бұрын

That looks awesome 👌

@nickstewart1218 3 жыл бұрын

Plan to do the roof of my jeep, thanks for the video. I'm sold on it now 👍

@dicklarge1901 3 жыл бұрын

Decent something is getting lifted!

@josephmalinowski6817 3 жыл бұрын

Wow it looks great nice job

@julianrodriguez6549 3 жыл бұрын

Looks nice, that's what I want to do to mine. And price is not bad at all. Nice truck and the trail boss

@estevelerma7305 3 жыл бұрын

Man that looks really good for the price! Have you ever thought of putting fog light caps on the front bumper even though I know your headlights do the job?

@dannyneal9713 3 жыл бұрын

Came out great brotha!! If I could recommend some self protection to you. Take a 1” (I believe) hose clamp and secure it to your tailgate joint. This will SIGNIFICANTLY help deter potential thieves from your tailgate. Trust me you won’t be disappointed!!

@thomasmoli4484 3 жыл бұрын

JUST JOINED THE FAMILY BROTHER! LOVED THIS VIDEO! KEEN TO SCROLL THROUGH YOUR VIDEOS AND SEE THE REST! ALOHA FROM AUSTRALIA 🇦🇺

@LonestarHawaiian 3 жыл бұрын

Aloha braddah. Thanks for watching!

@jonathonvince561 4 ай бұрын

That garage is absolutely wild. I should have done the raptor kit instead of harbor freight but I didn't know about it until today. 😂

@mattthomson6838 Жыл бұрын

Been watching all of your videos lately. Love the channel. Ordered some moto metal wheels and tires for my sierra last week and just realized today they are pretty much the same wheels that you have on the og silverado.

@aaronpodgorski1617 3 жыл бұрын

Looks awesome now you need a deezee tailgate assist 👍

@gman8464 2 ай бұрын

Awesome work,those hard to reach corners I used adhesive promoter and worked great,I also raptor lined the whole outside of my truck in ford tractor blue and looks amazing

@tomcam77 3 жыл бұрын

Lots of prep work.

@southpawsgarage 2 жыл бұрын

NICELY DONE!!

@2639Baker 3 жыл бұрын

I have watched many reviews of this Raptor Liner stuff and this video is by far the best. #Texas

@darrinholstine5273 Жыл бұрын

Great covering it gets everywhere

@davidwinters2084 3 жыл бұрын

Awesome job beautiful garage to

@kevintrevino271 3 жыл бұрын

Looks awesome bro 👍🏼

@RobertsMoneyTalk 3 жыл бұрын

Came out great!!! So do tour neighbors love or hate ya!?!? Lol! Start both the the 2007&2020 up at the same time! The 07 body looks still brand new!! So cool!! 💯👊

@LonestarHawaiian 3 жыл бұрын

Not yet... but they haven't seen the car that I'm trying to add to the garage yet... we'll see!

@ClaytonW74 3 жыл бұрын

Blacked out Silverado emblems next??? Love your videos and some inspiration for my 2011 silverado build. Keep it up!!

@AlexGZ9 3 жыл бұрын

That looks sick!! I did mine by bullet liner. And yours look way better and for cheaper. Always amazing videos and content. 🤟🏼

@Vladimir-pf1ph 3 жыл бұрын

Great job!

@reachhigher 2 жыл бұрын

awesome video Bro! can't wait to do it on mine

@tonymendivil6692 3 жыл бұрын

I did the same bed liner on my 09 Silverado and I even taped off the bed rails and sprayed them as well and I love the way it came out ! But the kit I bought was an 8 bottle kit I wanted a pretty thick coat

@movementonwheels 3 жыл бұрын

Yes the ticker the better I learned the hard way.

@fredp3088 3 жыл бұрын

Dang that came out good.

@WarrenGBody 3 жыл бұрын

Excellent prep work brother! Wish I woulda known from previous vids that you were going to do this. I woulda warned you to make sure everything is completely covered. I’ve sprayed this 5 times (87 el Camino, 87 Monte SS undercarriage)and man oh man you gotta cover and re cover EVERYTHING! When I saw the open space and flooring exposed, I was like 😱😱😱😱😱😱😱😱😱😱😱😱😱 But it came out AMAZINGLY clean Bro! 🏆🏁🏆🏁🏆

@LonestarHawaiian 3 жыл бұрын

Lol I spent an hour with degreaser and a scrubbing brush... all good now, but lesson learned!

@cnotake 2 жыл бұрын

Nice job braddah!

@alexisperez2893 3 жыл бұрын

put some on your bumper! Great work mane👍🏼

@vinny3725 3 жыл бұрын

Good work man thanks

@Adam.s.. 3 жыл бұрын

raptor bed liner is pretty good stuff i have it on my youtube channel as well on a ram i load it with fire wood and all sorts of stuff it holds up to most of it

@user-hv7pv1em8t 2 жыл бұрын

This was a great video. Thanks for sharing.. I want to install a couple of new emblems/badges over the raptor liner. Have you done this in the past? If so, what would be the best adhesive to use?

@BigALCigarSmoke 3 жыл бұрын

Wow.. Nice work. Looks badass!

@LonestarHawaiian 3 жыл бұрын

Mahalo!

@overlanding116 2 жыл бұрын

I just ordered my kit to spray on my truck bed (camper) shell. Wish me luck...!!! P.S. You did a great job!

@THEDUDE0410 3 жыл бұрын

I'm going to spray my whole 2005 nissan titan

@gerardoesparza8650 3 жыл бұрын

It’s been a minute since I watched your videos. But man you never disappoint.. I gotta do that to my obs Ford. Thanks 🙏

@codypaterson9139 3 жыл бұрын

Looks good. Kudos to you to have the tools, time and patience. I’d just pay someone 4-500 dollars😂

@TN_HondaDad 3 жыл бұрын

Exactly, more than just buying the kit. Average Joe will not own a sprayer. With that said, I have a 90 F250 that has had a plastic drop on for about 25 years and looking at options

@jedkelly693 3 жыл бұрын

I work for a rhino lining place and we use a different sander and today I sanded 3 trucks in 45 minutes

@cdinnetz 3 жыл бұрын

Same, This "liner" offers zero protection, But its 10mil thick at the max. Mine are 120mil. Just my opinion.

@kieranpalmeira9748 3 жыл бұрын

Big bless braddah

@MrAngel7393 3 жыл бұрын

Love your videos brother. You should install on of those rear light bars. Would look nice.

@BlackLung911 3 жыл бұрын

Near the front of the truck about 1/4 of the Raptor top coat looks more matt than the rest, but overall it is a very nice job. :)

@jedidiahwilliamson6147 3 жыл бұрын

Anyone doing this for the first time, if you want to ever use your user tie downs make sure to pull out the caps before coating the bed. The bed liner makes it very dificult to do later. I had a dealership coat right over them was a pain when I went to use them.

@user-im8ht1wl3u 3 жыл бұрын

How does this guy know how to do all his mods like a pro good work wish I had that talent.

@LonestarHawaiian 3 жыл бұрын

Made lots of mistakes before I started filming 😂.

@bmac8130 3 жыл бұрын

Looks great but I would have pulled the the plastic oval covers at the top of the bed. For people who need to tie down a lot they make mounts that go in there that are awesome.

@dennisranck1613 3 жыл бұрын

That bed liner does look pretty nice. Now, you need to install a tailgate assist.

@LonestarHawaiian 3 жыл бұрын

Oh yeah!

@bumancuzbrah 3 жыл бұрын

howzit from kalihi. i like how you still got your hawaii plates. been seeing this a lot and want to do this to my work truck

@alabamaairborne4245 3 жыл бұрын

Need a vid on those 2020 trail boss chrome exhaust tips on how to black them out!

@2EZSally 3 жыл бұрын

Updates on the third vehicle? Absolutely look forward to your videos every week man!

@LonestarHawaiian 3 жыл бұрын

The search continues... COVID price spike is finally starting to come down.

@wonderingvoice3563 2 жыл бұрын

I appreciate the music!

@westonwarschak4490 3 жыл бұрын

Love the vids man I have 2011 Chevy Silverado 1500 crew cab and it’s the same color as yours, I was just wondering if you found a great tune for your truck because I am looking to buy one?

@robertchall8576 3 жыл бұрын

Looks good

@bandidomxgarage7898 3 жыл бұрын

Excelente trabajo

@jordanwynn1012 3 жыл бұрын

Man your garage is super sharp looking, may I ask exactly what you used to seal the concrete ? I like the color.

@freddieherrera1833 3 жыл бұрын

Looks good bro I'm doing my next

@DutchdetailingCenter 3 жыл бұрын

Nice video and it looks great. Whats next?😉👊🏻🤙🏼

@LonestarHawaiian 3 жыл бұрын

Everything!

@JOHNFNLESLY 3 жыл бұрын

It looks like who ever had your truck before you either had pullout bed drawers or a water/air tank frame bolted to the bed. My water tank with sprayer is about the same dimensions.

@LonestarHawaiian 3 жыл бұрын

Well observed sir. That's probably it!

@jmbugno 3 жыл бұрын

I used the same product on my jeep about a year ago but I made the mistake of not creating a "paint booth" in my garage. Now I have a story to tell when someone asks "what is all over your garage".

@chrisbernal4042 2 жыл бұрын

H&B spray on bedliner and truck accessories Houston Tx. $329 for your standard bed and $399 for a longbed. Takes about a hour and a half. Lifetime warranty too!