Raspberry Pi 4B Insane Overclock To 2.5 Ghz - Monitored With The InfiRay P2 Pro

Рет қаралды 12,352

Күн бұрын

In this video, we're going to be overclocking a stock Raspberry Pi 4B as far as possible before it gives up. I've seen a couple of Pi 4B's that have been overclocked to 2.3GHz, so I'm going to try to get this one to 2.5GHz.
ADDITIONAL INFORMATION
---------------------------------------------------
Get the InfiRay P2 Pro - www.amazon.com/dp/B0BG2QC143?...
$20 coupon code: Klements123
Visit my blog for the write-up - www.the-diy-life.com/raspberr...
PURCHASE LINKS
---------------------------------------------------
Raspberry Pi 4B 8GB - amzn.to/3C6LFdG
Ice Cube Cooler - bit.ly/3zAEL09
Ice Tower Cooler (Alternative) - amzn.to/3C7VYhq
Arctic Thermal Compound - amzn.to/43jQ358
Tool & Equipment Used:
InfiRay P2 Pro Thermal Camera - www.amazon.com/dp/B0BG2QC143?...
Jobi Gorilla Pod - amzn.to/43lVRef
Smartphone Holder - amzn.to/3WLr5Jt
Electric Screwdriver - amzn.to/3aOeDVa
Additional P2 Pro Thermal Camera Purchase Links:
US customer: www.amazon.com/dp/B0BG2QC143?...
CA customer： www.amazon.ca/dp/B0BJ1W6BBH
UK customer: www.amazon.co.uk/dp/B0BG2Q8KWN
GE customer: www.amazon.de/dp/B0BK92BRHL
FR customer: www.amazon.fr/dp/B0BK95GSLV
SP customer: www.amazon.es/dp/B0BK8S26VR
IT customer: www.amazon.it/dp/B0BK99D1X5
Others: www.aliexpress.com/item/10050...
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
1:32 InfiRay P2 Pro
2:40 Test Process & Baseline
3:38 Improving Cooling
4:34 Overclocking The Pi
2:39 Booting At 2.5GHz
8:44 Playing With The P2 Pro
10:43 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.

Пікірлер: 38

@emilysmith2403 Жыл бұрын

I can't believe that the thermal camera can be made sooooo small at present!！Great video to show such an impressive product and brand!

@sysadmin-info Жыл бұрын

Fantastic results. I mean both CPU and temperature. Even better than water cooling you made in the past for CM4 board with compute module 4. I am still waiting for a compute module. So far I bought only a CM4 board. If I will be able to buy a compute module, for sure I will record a video. Anyway you taught me ma lot of things (especially in microelectronics field). Thanks a lot for all the support you provided. It was invaluable help. Take care.

@MichaelKlements Жыл бұрын

Thanks for the great feedback and hope you manage to get yourself a CM4 module soon!

@user-pr1cs4ol5c 11 ай бұрын

Thanks man! This tool may be great to replace some heavy&costy handheld unit for the same outcome.

@djjkejp2114 Жыл бұрын

Great as always

@ryanmi4123 11 ай бұрын

Ohhh, looks very fit for the circut industry....

@Nuyoah-yz Ай бұрын

P2pro is much better than many other phone thermal imaging cameras on the market

@pgtmr2713 6 ай бұрын

I've run 6 Pi4s all overclocked to their individual limit.Only blew 1 up and that was from a self powered USB device. Created a difference of voltage. Pi4 4gb the highest OC was 2200 stable. It's getting close to 4 years running it at that OC. Pi4 8gb 2275 stable on the slowest. Fastest 2347. Pi5 4gb 3150 so far all day. The only glitches are the games so far. GPU 900 is most stable for pi4 and pi5, older slower pi4 866. Cooling, official power supplies and USB flash that can keep up. 400gb/s Samsung Fit or BAR work just fine for $13-16 128gb

@zavis506 3 ай бұрын

P2 Pro is an ideal tool for electronics enthusiasts and professionals

@TheVenuslune Жыл бұрын

thanks man!

@dmckrk Жыл бұрын

With scalped SOC, liquid metal for cooling.. some were able to get stable 2.5GHz. For CM4 there were news about insane 3GHz. Still you can improve your setup with just fan blowing into whole board cooling it a bit from bottom. I would also pay attention to pmic temp. I was always curious what is power usage on overclocked unit. Turbo mode destroys all charts for sure. ;)

@MichaelKlements Жыл бұрын

Yes I've seen a CM4 module overclocked to 3.0GHz by Claude Schwartz. I didn't think to measure the power usage - I'll have a look at that on my next run.

@dmckrk Жыл бұрын

@@MichaelKlements The whole goal of overclocking is to get as much as possible, but nobody cares how much that costs. If You loose ability to dynamically adjust frequency board will draw much more power than it's needed and therefore power per watt would be miserable. Q engeenering guys made some test on overclocking with some insights about power, but they went much lower and don't cover real world usage. I don't think that anybody is using pi fully loaded all the time 24/7, in real world maybe about 20% of time it can use high loads so down area is for me much more important than peak usage. I would be grateful for such results showing power stats! :)

@dylanleach1604 8 ай бұрын

I'm currently running 2.45ghz stable on a rpi4B but I have had it up to 2.6ghz but it would freeze after 10 minutes. I use a portable ac/dryer and a heat sink case as the active cooling solution. It keeps the temps around 15-25°c Current stable clock CPU=2450mhz GPU=900mhz Over volt=14 Initial turbo=60

@MichaelKlements 8 ай бұрын

It's impressive that you found one that would boot at 2.6Ghz, even if it does lock up after a few minutes.

@alphabook 8 күн бұрын

Thanks Michael . My raspi 400 with usb ssd freezes .How to change the over voltage from 6 to 7. Please share the command lines .

@BenjyHanz 4 ай бұрын

Question is how much lifespan can achieve with such overvoltage?

@vadermasktruth 8 ай бұрын

HELP! I'm not able to access these things on my Pi4. I can get to the black dialogue box, but there's no access to GPU or temperature. How can I enable all these things?

@Yeoja_seuta 5 ай бұрын

So small but powerful

@niikon 9 ай бұрын

Has sysbench changed how it counts events? 2.1GHz @ over_voltage=6 >> 32749 2.2GHz @ over_voltage=8 >> 34411 2.3GHz @ over_voltage=9 >> 36037 Raspbian Lite 64bit Pi4 @ 2.1GHz @ over_voltage=6 >> sysbench --test=cpu --cpu-max-prime=20000 --num-threads=4 --validate run CPU speed: events per second: 3273.43 General statistics: total time: 10.0011s total number of events: 32749 Raspbian Lite 64bit Pi4 @ 2.2GHz @ over_voltage=8 >> sysbench --test=cpu --cpu-max-prime=20000 --num-threads=4 --validate run CPU speed: events per second: 3439.63 General statistics: total time: 10.0010s total number of events: 34411 Raspbian Lite 64bit Pi4 @ 2.3GHz @ over_voltage=9 >> sysbench --test=cpu --cpu-max-prime=20000 --num-threads=4 --validate run CPU speed: events per second: 3602.39 General statistics: total time: 10.0006s total number of events: 36037

@Fynnley 11 ай бұрын

I am absolutely confused, I copied your command for the benchmark 1 to 1, but my Pi does a "total number of events" of 35k+ and my latency is 1ms average, were you on a 64bit OS?

@MichaelKlements 11 ай бұрын

Yes, I'm using the 64-bit version of Raspberry Pi OS. Did you copy the prime number limit as well?

@Fynnley 11 ай бұрын

@@MichaelKlements yes I did, I typed the entire command to compare, maybe a different version of the tool? One thing of note is my pi is headless, not a full desktop, that... shouldnt make that huge of a diff tho right? I actually ended up delidding the pi (suprisingly easy, the glue IHS glue is crap) and just cranking it to 2.5Ghz, so balancing performance and stability is no longer a problem with it running at 42C. Still definitely odd tho

@MichaelKlements 10 ай бұрын

I'm sure a different version and the fact that yours is running headless would make a difference to the results but I wouldn't have thought that the difference would be so significant. I still need to try delidding a Pi!

@TheLukemcdaniel Жыл бұрын

You're supposed to get multiple data points. What you should really be doing is running the 1.5 GHz set of tests like 3 or even 10 times, then look at the min/max/average in case there's a fluke somewhere. Then do the same for each iteration of frequency increase.

@greg4367 Жыл бұрын

Who cares? YOU CAN'T BUY A PI4. I love hoe Eben says they MAY be available late this year, but that is then, not now, and I've been lied to before. Lets just use a cheap x86 or a Potato and quit giving air time to company that sells the hobby community nothing while feeding their commercial customers.

@SgtStarSlayer Жыл бұрын

I stopped at 2.1ghz and 700 frequency with gpu and at 6 overvolt. Couldn’t push it any harder unless using air conditioning.

@osopenowsstudio9175 10 ай бұрын

What's the temperature? My RPI 3B+ is at 1.5ghz at 45 degrees Celsius (only fan and tiny heatsink)

@SgtStarSlayer 10 ай бұрын

@@osopenowsstudio9175 54*c, same heatsink and fan. fan is on 24/7.

@dylanleach1604 8 ай бұрын

@Dayton_X Жыл бұрын

@jeffgeerling needs to confirm this😮

@diabeticnomad Жыл бұрын

@jeffgeerling

@Dayton_X Жыл бұрын

@@diabeticnomad what he said👆

@MichaelKlements Жыл бұрын

@JeffGeerling the people want validation 😃

@JeffGeerling Жыл бұрын

Haha don't worry, it does seem that some limits were lifted with later versions of the SoC. Can you confirm your board has a "C0" revision chip instead of "B0"? That's the version that was put on the CM4 and Pi 400, and they later started putting it on Pi 4 model B as they ran out of the B0 stepping. The C0 is not substantially better (especially at base clocks), but does seem to handle overclocking at the extreme end a little better. That, plus you may have won the silicon lottery with your chip. None of mine go over 2.3 GHz and are stable at all.

@MichaelKlements Жыл бұрын

That's quite interesting, I didn't know that that was even something to look out for. I can confirm that the board in the video is a B0 revision though, the last digits are "B06B0T". It is one from back when the 8GB was first released. You can see the numbers on the chip at 0:06 when it's a bit better in focus. I understand that they also improved the PMIC on the 8GB Pi 4B (along with the CM4 and Pi 400) so that is one of the reasons why they generally do better than the other 4B variants.