I would love to continue building this. I had a comeplete block and never finished it. Would love to hear your thoughts on how I could go about finishing it! #Retro #Apple #Macintosh
Пікірлер: 231
@SodaTheProto2 жыл бұрын
Hey Elliot, i think you might want to put the SD Card reader on the front, where the floppy drive was, so it keeps that spirit of popping a floppy in and load a program. Besides that, I think it's a pretty cool project and I hope you can get to work on it again
@byiobuz232 жыл бұрын
you can even make a special floppy disk drive to read a sd card inside a floppydisk . like this one in this video: kzfaq.info/get/bejne/nbSBjMWEvKjMcac.html&ab_channel=DanieleTartaglia
@TheLeggedOne2 жыл бұрын
You could also mount a USB floppy drive inside if you want to use real disks on the pi
@SodaTheProto2 жыл бұрын
@@TheLeggedOne I thought of that, but it would make you need another one to write floppys, not even taking in consideration the fact that the reading/writing speeds would be terrible and the fact that it's still about 720 Kilobytes (i think it was that). What could be done tho, is making a 3D printed case for the external drive to make it look like an external drive from Apple at the time and have it plugged in a usb port put at the rear where the parallel port was. Edit: i also don't know if there's any compatibility at all between Raspbian and the usb drive
@UNSCPILOT2 жыл бұрын
@@TheLeggedOne that would be pretty neat, even if you would need to plan out what you would actually want on the Floppies given they are so much smaller than modern storage, unless of course your using ligit old floppies with the actual software on them for a emulated version of the intended OS
@draconic51292 жыл бұрын
@@SodaTheProto I believe linux still does have floppy disk support. Also most apps will probably just see it as a USB anyway.
@MartinPaoloni2 жыл бұрын
That yellow lightning bolt at the top right corner around 4:30 means the Pi is not getting the necessary power to work at full speed. Consider getting a better power supply for it. Very cool project! Please give it the chance it deserves!
@balls082 жыл бұрын
You might be interested to know that action retro made a seamless emulated macOS image running in qemu for the pi. It's a newer version, but if you want an older version, i bet you can do something similar.
@datassetteuser3562 жыл бұрын
Yes, please finish it! It looks gorgeous, man! The curved plexi sounds also pretty interesting, I've not seen something like that before and would love to see what the effect looks like. Moreover, how nice would it be emulating a Mac emulating a Gameboy on this thing? Really hope you can make some progress on this some day.
@liamjones21312 жыл бұрын
It would be great, but, I have a feeling it might be too fast.
@mattowens38572 жыл бұрын
@@liamjones2131 Open Emu is the software we mac users have for emulation, I love it and havent had any issues.
@punkshoo2 жыл бұрын
Would love to see this finished, Elliot. I'm a PC builder, retro game enthusiast, and modder, myself, and I greatly wish to live vicariously through you. Genius project and would love to see some Oregon Trail playing on the Mac side of things!
@chairmansparky2 жыл бұрын
Nice to see Kid Pix was ready to run. I wrote the Acorn Archimedes version of that 30 years ago.
@Xilefian2 жыл бұрын
Oh man this is funny. 4 hours ago I read a Tweet that went popular throughout the retro computer community "please stop gutting retro computers only to put an LCD and Raspberry Pi inside them". I think you get away with this, though, as you said the motherboard was corroded to all heck.
@jameswoll Жыл бұрын
Finish it! This is an awesome project! Would love to see where you take it and it would be inspiring for me and my projects!
@TheGoutmeister2 жыл бұрын
I've wanted to do this mod for so long but can't bring myself to butcher a working mac or find the right broken one! I'd be great to see it progress, it looks so good. One thing you could also do is get an original Apple Desktop Bus (ADB) keyboard working over USB with a simple converter using an Arduino Pro Micro
@lepidotos2 жыл бұрын
I'm glad to hear you're not going to gut a working one, far, far too many people have no qualms doing that.
@stefanolassandro8862 жыл бұрын
I really hope you manage to finish this! Looks like an amazing project, and it's quite ahead in its developement! There's not point in quitting now :D
@yinzer4life12 жыл бұрын
Very cool. One with a game cube would be cool too with Game boy player would be cool too to hide inside. The Apple CubeBoy
@JamieBainbridge11 ай бұрын
Hope you did this. It's almost impossible to find a genuine housing like you have. I wish I had one and would do the same thing.
@JamieBainbridge10 ай бұрын
Update: I found a cheap empty shell
@johnlawson12522 жыл бұрын
Excellent idea! Yes, most definitely finish it!
@acomingextinction2 жыл бұрын
Retro Mac projects are my favourite. There's something classic about pre-iMac Apple designs. I like that the case itself is unmodified. What about replacing the Pi with a Mini-ITX or some kind of nano PC? You could then easily run full-speed Basilisk II and basically have an original SE/30 experience that wouldn't scare away someone who time travelled from 1989.
@LocalTechDad2 жыл бұрын
Then please check my video, I’ve „upgraded“ my Macintosh plus with a Mac mini inside 😇
@Anna-abc2 жыл бұрын
Absolutely worth finishing.
@Hilqy2 жыл бұрын
cant wait to see this continued
@OctavioGaitan10 ай бұрын
I hope to someday get ahold of a corroded compact Mac, clear it out, and mod it as a mini-ITX sleeper PC case.
@craigbillow2 жыл бұрын
Okay, this was a big tease. Finish the damn thing! It's beautiful.
@sonic3_da2 жыл бұрын
This thing just looks awesome!
@NicholasAarons Жыл бұрын
It’s such an Awesome Project with so many Possibilities…!!!! Thank you for sharing your Apple Mac Pi Project with Us & Keep up the great work…!!!! Kind Regards Nicholas🧔🏽♂️🎮⌨️🖱️🎧🖥️🏴🇬🇧.
@tommcclintock50192 жыл бұрын
I'd love to see this finished!
@sjm43062 жыл бұрын
Dont worry, I literally have a labelled drawer of shame where some projects go to die. Once in a blue moon I pull one out and actually finish it tho so it's not an inescapable purgatory ... I have a separate drawer for those unfortunate projects :-(
@piratk2 жыл бұрын
For a moment I thought I was looking at Adrian's basement. But do continue!
@tbanshee2 жыл бұрын
You did really good, very cool!
@paulb4uk2 жыл бұрын
Cool project definitely needs finishing .
@SuperNicktendo2 жыл бұрын
Looks incredible. I feel ya on projects like this. I have a mac g4 that I want to turn into a Retro gaming machine. But for now it sits fancy on my shelf.
@bbloomfield64972 жыл бұрын
This is such a rad idea! Definitely worth finishing. Getting the curved acrylic is an extra step of genius. For the sake of preserving the original Mac experience (I think something like this would be more feasible in a technology museum setting, rather than original irreplaceable hardware), having a stealth computer that wouldn't get stolen, a cool media hub or mini server etc. I used a few Mac's below this one first back in the 90s, but this was the first one were computers really started to click with me.
@KAZ3EM2 жыл бұрын
You should finish it! Greetings from Germany 🇩🇪!!!
@DungeonSweeper2 жыл бұрын
Looking forward to seeing this completed at some point. Would love to see some old Mac games running on it too!
@rigeoff2 жыл бұрын
Love the old Macs. This was my FIRST computer and your project is very inspiring. I love your game boy projects and was thrilled to see this one! In 2 years.. maybe work on it a little more? Have fun!
@pauljennings84322 жыл бұрын
Yeah finish it fella- it would be good to see!
@Evercade_Effect2 жыл бұрын
I really do enjoy your second channel and these videos.
@zacmitchell_19842 жыл бұрын
I have wanted to build one of these for years
@eevee44862 жыл бұрын
Finish it please! it looks amazing!
@leonschroder29702 жыл бұрын
Yes, definitely finish it. Looking forward to it!
@destroyer64702 жыл бұрын
I have always wanted to do this. But with a g3 like the one I had as a kid.
@masterbloodwolf29292 жыл бұрын
This is such a cool idea, I'd buy one lol
@TheSouthernTroll2 жыл бұрын
you can use a piece of light filter gel sheet to make a cover for the screen, stick some double sided tape around the inner edge of the Macintosh display and stick the gel sheet to it, it will follow the curve of the crt but would dim it, I'm doing it right now with an apple //c monitor
@glovelock2 жыл бұрын
Would love to watch this build!!
@ActionRetro2 жыл бұрын
Nice mod!! There's an adapter out there called Drakware ADB USB that would let you use the old Mac keyboard and mouse with the Pi. Might really complete the vibe!
@VesparDubstep2 жыл бұрын
Definitely finish it!
@bramvandenbroeck50602 жыл бұрын
I have the exact same idea with a broken iMac G3 i own! The analog board is making scary popping sounds and the crt is dull as it can be, it whas an old school iMac so yeah, the thing is just worn out to bits! But i really love this iMac, and my plan is to gut the machine, install a modern lcd monitor in it, i have this small acer laptop motherboard which has everything on board, you can plug in ssd's, sd cards, it has bluetooth and wifi, hdmi and usb 3.1, i want this to become a linux mac, or a hackintosh for that mather, i just need the parts to make it all work, now this motherboard is build into a wifi modem, which people think is cool, but the ultimate project would be this iMac G3 project offcourse! I think you have to finish it, the idea is so cool, and you got all the essential parts ready to go, so you have to finish it man, it would look so cool! Action Retro made the smallest PowerMac G3 setup in the world, he also used a raspberry pi, and the thing acted like a real mac, including the bong sound, it would act and boot like a real mac, so i think you could do something like that, and than "emulate" the real linux environment, i think he uploaded the sd card image to archive.org to make it happen, it will boot into macos 9 directly, but you can jump into linux offcourse to do 'real' work :p have fun making your project!
@robmanzur6012 жыл бұрын
I really want to see this project get completed
@malfattio28942 жыл бұрын
I wonder what a rear projection screen with curved, frosted plastic would look like.
@DeNightCrawler2 жыл бұрын
Hi Elliot! Great idea! You could use a card reader and put in the floppy tray. just use some rods for height and stability and you can push the card through it!
@Sajingu2 жыл бұрын
This project sounds abosutely amazing. I think you should continue it if you can cause it sounds you put a lot into it. It is unfortunate that other things did get in the way of it.
@JackBealeGuitar2 жыл бұрын
Of course you should finish it! You know it, we know it, we all want to see it
@Jellonaa2 жыл бұрын
Ah yes, been waiting for this one!
@Cory_2 жыл бұрын
Cool idea!
@alexismazzanti69292 жыл бұрын
Yes! totally finish it!!
@burpethead2 жыл бұрын
With ADB to USB adapters you can use the proper original keyboard and mouse
@mcintoshmalone11072 жыл бұрын
Elliot that is sooo cool!!!
@Gerkozielman2 жыл бұрын
Nice project man!
@harryandy442 жыл бұрын
Awesome project, please finish this one, would love to see it complete
@khayafhaya2 жыл бұрын
This is BRILLIANT!!! PLEASE FINISH IT!!! And then send it to LGR to review it
@hero_in_deepblu2 жыл бұрын
This will be sooooo cool if you finish it! I'd absolutely watch videos of you working on this if you take it up again.
@charliedog907 Жыл бұрын
I’d like to do this! Hope you get to this again someday
@richardayton6862 Жыл бұрын
I built one of these during the covid locksown and I use it for all sorts of things
@KobayashiKimiko2 жыл бұрын
You should totally do this. Makes me think about doing some custom cases of my own for a Raspberry Pi. Maybe installing Windows XP on it LOL.
@jontait10952 жыл бұрын
Those macs were the first ever computer we got to use at school it was black and white screens only the teacher had the colour screen one
@MrJayArt2 жыл бұрын
Definitely finish this!
@daffodyl_n2 жыл бұрын
i love this idea, i'd like to make one myself
@The_Studioworkshop2 жыл бұрын
I have a 9 inch CRT VGA monitor. You’re welcome to it…
@LucaBlightOfHighland2 жыл бұрын
well, this has potential.
@VileoSufora42 жыл бұрын
Definitely finish it! This is super cool. It'd be really cool if you could add like a floppy drive to it as well. For... Reasons of course.
@jessebeard41782 жыл бұрын
i really like this project. its similar to something ive had in mind for a few years. id like to see how it works with the "crt" lens and how you can center the display into it.
@AndrewWoodford2 жыл бұрын
Heck yes! I’ll give you a dollar when you do!
@BigRigCreates2 жыл бұрын
If it's any consolation, it took about 3 years for me to finish my McTable touch screen computer. So I say go for it even if it's been on the shelf for a bit!
@Emily-the_funny_guys2 жыл бұрын
Awesome so far, please finish it
@snoleygames2 жыл бұрын
Definitely finish it Elliot, I'd love to see a demo run.
@zerocold19852 жыл бұрын
it's an interesting project! I like it, i had two RPI2, one for emulation and other one for video streaming
@allanfulton89222 жыл бұрын
I really hope you do finish it
@richardbertouche2 жыл бұрын
I built one of these! A Pi 3B+ with Retro Pi/Emulation Station, an 8.4" 4:3 lcd screen plus driver from China; extended USB (front & rear), Ethernet, HDMI, Audio, etc. to the back ports of the Mac. A HDMI splitter to send display to both in-built screen and HDMI port on the back. Two power supplies inside, one for screen, second for Pi, both connected to a single kettle power in the original Mac hole with original style rocker power switch to turn it on/off. Even have a power LED on the front :-) Pair of Bluetooth PS3 controllers completes the set up. So, do it! Complete the build.
@risingfate112 жыл бұрын
Would be cool to turn it into a pi cluster set up.
@TheSkaldenmettrunk2 жыл бұрын
Would love to see the finished product.
@RobotSeaMonkey2 жыл бұрын
yes definitely finish it!, and maybe if you get the time, you should make a retro desk setup with it, and do some cinematic shots :D. Also i can imagine a setup where it looks like a futuristic "cyberpunk"-ish desk setup, and maybe you can somehow incorporate the gpi case 2, and when you dock the gpi case it smoothly transitions to the bigger screen (like imagine that in the far future where theres no internet anymore and people are forced to get back to retro gaming, that kind of setup), well its just an idea from my part, i would be satisfied if you would just make it a functional day to day device, maybe a portable one? it could definitely be portable :D
@adamb66462 жыл бұрын
Looks great. I've really been wanting to make a modern classic PC, myself. Probably not an integrated style like that Apple, though. Just modern guts in an old beige, 20 lb, steel case. Lol. Also, do I spy a Rolex? Between that and the awesome flat, you're clearly doing pretty well!
@Gorillarevolta2 жыл бұрын
Yes please finish it!
@domramsey2 жыл бұрын
I think you should keep working on it. Make it a series. I'd like to see it done in the highest possible quality - you're pretty good at the attention to detail stuff.
@Lupoalberto12It2 жыл бұрын
Yes! Finish it! 😉
@sporadiceel62462 жыл бұрын
Put a floppy disk read in the front! I've got one, it works great over USB. Also thanks now I'm going to be doing this lol
@zachlundberg48022 жыл бұрын
Yes please i would like to see the finished product. I had this exact model several years ago and i now wish i still had it to do something like this. Also it looks like one of those arcade type games that you would find at a bar so another idea is to get an arcade style fight stick or 2 and have a mini desktop arcade emulation machine that can also do other systems as well like snes or ps1
@markaz2kk2 жыл бұрын
Put a few dozen 18650’s in the box and charge it up via solar. Eco and fun nostalgia system!
@nrg7532 жыл бұрын
OK got some thoughts. I saw a thread on the Raspberry Pi forums and it seems you can actually run a USB floppy drive. There is also the Basilisk emulator if you want to emulate later 68k MacOS up to 8.1 with real system software. You can use the built in overscan on the raspberry pi to give it black borders around the screen. It might also be worth playing around with the raspberry pi so that it will boot straight in to mini vmac or basilisk.
@nrg7532 жыл бұрын
Long term/crazy idea: swap out the RPI for a MiSTer FPGA with the MacPlus core?
@fryke2 жыл бұрын
People in the 90s: Let's take this empty Mac SE and make it a fish tank. Elliot: Actually, let's try and make it a Mac somehow.
@playgroundsinc2 жыл бұрын
I want a part 2
@MrPufins Жыл бұрын
did one similar a few years back. i wish my driver board had HDMI. display port only so i used a small PC instead of PI. also dremeled out the bezel a bit to not crop the screen but kinda turned out mediocre
@ToxoRetro2 жыл бұрын
Cool concept! I think this would be right up Ctrl-Alt-Rees' street. I can imagine an artificial CRT being rigged up to a TheC64 "maxi".
@tinkerfreak46022 жыл бұрын
Bless the world with a finished product sir , I beg of you please please please 🙏
@silversonic12 жыл бұрын
Go for it.
@tonybossaller40742 жыл бұрын
The suggestion I'd make is to make (3d print, particle board and glue, however) a cover for the slot in back and route your USB cables to it. The power strip inside could be good, especially a tiny one. Only really needs your monitor power and a USB cable. But likewise, you could always use the front drive slot for an SD card port instead. Won't be completely discreet but most people won't try to push a floppy in. ;)
@kirksknight2 жыл бұрын
I noticed that hoodie 😎
@davidhatton51802 жыл бұрын
Do it brother! so cool, drop it in the new kitchen for tv, browser, recipes Ect…..
@carldavis58392 жыл бұрын
This just reminds me I need to finish my macintosh project, I've a 512k case with an intel i5 9600k in the works. Probably a little over kill.
@Chaggy1978 Жыл бұрын
Would love to see this project complete. Did you manage to do it?
@gamingsucks53492 жыл бұрын
You could use the original board for the ports at the back for looks also it would be cool to somehow connect the original CD drive to the Raspberry pi as a working drive :)
@gamingsucks53492 жыл бұрын
Also Elliot keep up the good work 😄 on your video's
@Suzuki-RGB500-5711 ай бұрын
Hi, Great project, I have one question. Where did you get the video card/pcb from to run the screen?
@adonian3 ай бұрын
I was hoping to see/find a 3d printed housing… oh well, hopes dashed.
@Underestimated372 жыл бұрын
Ok, so someone else has mentioned it, check out action retro’s videos on how to get the Rpi emulator going for the Mac, what you could also do is theme the Linux setup so that it resembles MacOS X or even MacOS 9, Linux is extremely flexible so that’s easy to do. As for the case, you can get little surface mount USB extender plugs that are designed for things like furniture or wall mounting, and basically ‘transfer’ the USB ports from the Pi to the back of the case, therefore reducing the times you’d need to uncase the unit. If you wanted to get tricky you could even chuck a couple ‘hidden’ USB connectors in under the little offset ridge on the front of the case for things like controllers. You can get USB power leads with switches on them, if you mounted that kind of thing onto the back of the case you can easily make an easy on/off switch for the unit. Screen screw mounts can be 3D printed and attached with epoxy to the inside of the case so that you can mount the panel using the existing screw holes or you could make little half circle ‘clamps’ that screw in and rotate in and hold the screen up and in place. Stuff to use it for once it’s done? My absolute first recommendation would be ScummVM, playing some of the old LucasArts games, or Emulators, plenty of stable ones on Linux. Use the Mac emulators, play some glider pro, (macintosh garden has an enormous library, and with a couple different emulators you can emulate up to OS9 and play some awesome games from back then) As for adding a couple card readers? People have suggested just slipping one in the floppy drive, or you have a good cutout for a surface mount card reader on back. One of the neater things you could use it for is a jukebox, get a quality speaker and fit it in the case with everything secure, hook it to the raspberry pi and run a music playing program on it like Amarok (which looks awesome) to choose music, or chuck some audio jacks on the back and run them to the Pi for external speakers.
@SlytherinReviews2 жыл бұрын
You’ll be wanting to upgrade that Raspberry Pi board soon
@Underestimated372 жыл бұрын
The good thing is they have essentially the same footprint so they can be swapped in place